How to reinstall SMC Firmware Update?

Hi,
I've an issue with my fans: after a SMC reset , they're doing fine until I put my MacBook Pro to sleep; then they are stuck at about 2000 rpm, independent of the CPU temperature, so that I've to reset the SMC again to fix it temporarily...
Would like to reapply the SMC Firmware Update to see if this help; does anybody know how to do this, as upon starting the app, it just tells me that I'm already at the right version and there's no Apple Firmware Restoration CD available for the new Macs from late 2008 available (yet).
Any help's highly appreciated!
Thanks and best regards,
Michael

iVmichael wrote:
+My fans are going to sleep fine, they just stay at 2000 rpm all the time (when awake, of course), independent of CPU temp.+
That's quite normal.
haha oh wow... did you guys actually read what OP wrote?
@ OP, read here: http://discussions.apple.com/thread.jspa?threadID=1823105&tstart=45
obviously there's nothing you can do up to get your mbp replaced to hopefully get a working one. i don't think apple will EVER fix this problem, cuz it exists since release. just like many other issues apple never fixed...
Message was edited by: preller

Similar Messages

  • MacBook Air SMC Firmware Update v2.0 update available again and again.  How do I fix it?

    I have installed MacBook Air SMC Firmware Update v2.0 three times and I still get an update available notification asking to install it again.  This is a mid-13 MacBook Air running OSX 10.9.3.   System info lists the SMC version as 2.13f7.
    Does anyone know how to resolve this issue?

    Hi,
    - Are there any status or error messages in /var/log/install.log
    - The Firmware version it should install is 2.12f137
    - If there isn't anything in the log try:
    Intel-based Macs: Resetting the System Management Controller (SMC)
    and/or About NVRAM and PRAM
    and check whether there is installation.
    If no install, try OS X: What is Safe Boot, Safe Mode
    then reboot normal, try the install again.
    Hope this helps

  • After updating the MACBOOK AIR SMC FIRMWARE UPDATE 1.9 so many times still can see update? How to get rid of this one please help.

    After updating OS X Mavericks MacBook Air SMC Firmware Update 1.9 so many times (restarted more than 10times) but then still cannot update? Please help.

    Here it is...
    /dev/disk0
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:      GUID_partition_scheme                        *121.3 GB   disk0
       1:                        EFI                         209.7 MB   disk0s1
       2:                  Apple_HFS MACintosh HD            120.5 GB   disk0s2
       3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
    do I need to disable the FlieVault?

  • Is SMC Firmware Update necessary?

    Hello there
    I have the Software Update window popping up telling me to download the SMC Firmware Update. I know that the update adjusts the fan behavior in the MacBook but does anyone know exactly what it does and changes?
    My MacBook has been working fine since I got it in July. No weird fan behavior nor RSD nor overheating problems (thankfully! I'm hoping it stays that way). So my question is do I need that update, or is that update only for users with those problems? If I download it, how does it alter my MacBook behavior?
    Any advise is appreciated! Thanks in advance.

    Honestly I was kind of like you. I downloaded the firmware but didn't install it for quite a while. My MacBook as worked fine and I saw no reason to screw that up.
    But..... it got the better of me and I went ahead and installed it. I haven't noticed any difference whatsoever. Fan behavior is the same I guess because I've only heard them a couple of time so that's never been an issue. I guess it may run a little cooler but again I don't really pay that much attention to the temperature anyway so I'm not sure.
    SMC is System Management Controller which is a micro-controller on the logic board that controls various functions (in this case the fan). I've never found anything specific other than some have said the fans run non-stop. Could be but I've experienced nothing different than before I installed the firmware.

  • Having problems with SMC Firmware Update 1.8

    I installed the MacBook Pro SMC Firmware Update 1.8 yesterday and have since experienced a number of problems. I am running a 15 inch, Mid 2012 MacBook Pro, btw. First, after the intial install the sytem would not reboot. I had to do a physical reset of the SMC controller to get the system to power on again (sft-cntl-option-power key sequence). Once the system rebooted, the fan in stuck on high and the battery meter in the controll bar does not show status, just displaying an "X" in the battery.  I went into the Software Update utility and the SMC update is still listed as available, I tried reinstalling it, and the situation has not changed. The fan noice is annoying and I'm aftraid to disconnect the laptop from the AC adapter. Please advise.
    -cp

    Firmware updates don't affect to Windows and OS X. The firmware makes your hardware work, not the operating system, so you won't have any problem doing this

  • IMac SMC Firmware Update 1.1 will not load. Help!

    I have just purchased an iMac with a Fusion drive. The App Store tells me to install "iMac SMC Firmware Update 1.1." I have tried to do so several times, leaving the computer alone until it restarts itself. But the update does not seem to have taken place: the udate is listed among the updates accomplished, but it continues to appear at the top of the screen as the available update and the badge for an update still appears in the App Store icon.
    Any suggestions? Is that a faulty upgrade? Have I got an faulty Mac?

    But isn't the Fusion drive in part a flash drive?
    And if I don't need it, how do I dismiss it? Will my App Store Icon forever have a red badge telling me I have an unneeded update to install?

  • Can't install SMC Firmware Update for my MacBook Pro 15" early 2011

    Can't install SMC Firmware Update for my MacBook Pro 15" early 2011

    Check your Network control panel and turn off Auto-Proxy setting.
    This is one of the top #4 "how can they do this' pet-peeve errors.
    The other is the often slow 8 hrs to download 600MB even on 10Mb+ cable.
    Another, 'the drive cannot be partitioned because there isn't enough contiguous unfragemented free space; some files are locked and cannot be moved."
    If auto proxy isn't it, router/modem and DNS settings.

  • SMC firmware update 1.4 for Tiger? Does it exist?

    Hey everyone,
    I got a new L-style charger for my old (2006) MacBook Pro. Now it doesn't work, which I've come to learn is a known problem related to the firmware (the charger works fine in new MBPs, and my MBP charges fine with the old T-style chargers). In order to fix the problem, I need to install the SMC Firmware update 1.4, but I'm not finding one that works for 10.4.11 (only 10.5 and higher). Does one exist? If not, how does Apple expect me fix the problem? Sink more money into it? Any help would be appreciated. Thanks.
    -

    You many have to try calling Apple sales/support and ask to speak to a
    product specialist about the charger adapter you have this problem with.
    There may be a different version of the charger, or an older style new
    stock model required for your computer which matches its hardware.
    Or, check with a third party reseller of original Apple hardware parts to
    see if you can get the original AC adapter without the L variant.
    The 1-800-MY-APPLE number would get you the main Apple sales
    and sales support division; same as the main web page call center.
    Other than this suggestion, due to the difference in build model year,
    I have no other ideas at this time. Other than it's time for coffee...
    Good luck & happy computing!

  • SMC-firmware update 1.4 not recognized

    Recently I downloaded the SMC-firmware update 1.4 because my new L-shaped MagSafe power adapter was not working with my computer. For a day or so, I was relieved because the update appeared to fix the charger, but then it stopped working altogether again. After trying multiple methods to fix this (unplugging the adapter, trying different outlets, resetting the SMC, etc.), I discovered that my computer was still running SMC version 1.27f3. I've tried downloading the update manually, but every time it says that my computer doesn't need it. Any advice on how I can actually update the SMC?

    It turns out my adapter was actually broken. I went to the Apple store and they replaced it with a new one. The guy at the Genius Bar said the SMC update was only for MacBooks and that the L-shaped adapters should work with MacBook Pros.

  • Problem with SMC firmware update.

    I can't seem to run it. Everytime I go to, it never installs. I have a feeling that it has to do with bootcamp. Whenever I restart my computer, it runs Windows (I don't know how to fix that.) so I can't just press restart, I have to actively start OSX.
    I go to install it, my computer starts up, and then the installer pops up again. I press restart, start up the computer, same thing. I've done this 4 or 5 times and the same thing happens everytime. What should I do?

    Sheir,
    Go to System Preferences>Startup Disk and verify that OS X is the Startup OS that is selected for your Mac. If it is not the one selected, select it and restart your Mac a couple of times to verify that it will restart into OS X. If it won't then we need to figure out what is going wrong.
    If it successfully restarts into OS X then go to Applications>Utilities and look for the SMC Firmware Update.app that should have been placed there and trash it. Also trash the SMC Firmware Update.dmg if you have it. I don't think you will because Software Update has been doing the install. Empty the trash.
    Then go to Apple Downloads and manually download a fresh version of the iMac (early 2006) SMC Firmware Update released on 16 MAY 2006.
    Shut down all your other programs except the Finder and Dashboard. Unplug everything from your Mac except your USB keyboard and mouse. Turn off Airport and Bluetooth if they're on.
    Make sure you are completely familiar with the SMC Firmware installation instructions.
    Try to do the install again.

  • How do i install firmware updates for time capsule?

    How do I install firmware updates for time capsule?

    If you are using the Lion or Mountain Lion operating system on your Mac.....
    Open Macintosh HD > Applications > Utilities > AirPort Utility
    Click on the Time Capsule icon
    A message will be displayed if there are any available updates. Click to update if that is the case.
    If you are using the Leopard or Snow Leopard operating system......
    Open Macintosh HD > Applications > Utilities > AirPort Utility
    Click on the Time Capsule icon, the click Manual Setup
    Click on the word Version (3rd line on the page) and any available updates will be displayed. Click on Update to proceed.

  • Error while trying to install SMC Firmware Update

    I have 2 original model 13" MacBooks doing the spontaneous shutdown thing. Both are running OS 10.4.11. One has SMC version 1.4f8, the other has SMC version 1.4f10. When I run software updater it comes up with 2 updates: MacBook EFI Firmware Update 1.0, and MacBook SMC Firmware Update 1.1. The first time I used the standard method of clicking on "Install 2 Items", etc. When the restart instructions came up, I clicked on restart, entered the password, and got the message: "An unexpected error occurred (0). Your Firmware cannot be upgraded."
    I tried again, only I selected just the SMC update instead of both. Same result. I downloaded the package and tried to install directly instead of going through Software Updater, same result. I tried installing the EFI update by itself using different methods. Same result. Using advice from another thread, I tried opening the firmware updater application directly from the utilities folder. Still get the same error.
    Anyone have any additional suggestions?

    I have 2 original model 13" MacBooks doing the spontaneous shutdown thing. Both are running OS 10.4.11. One has SMC version 1.4f8, the other has SMC version 1.4f10. When I run software updater it comes up with 2 updates: MacBook EFI Firmware Update 1.0, and MacBook SMC Firmware Update 1.1. The first time I used the standard method of clicking on "Install 2 Items", etc. When the restart instructions came up, I clicked on restart, entered the password, and got the message: "An unexpected error occurred (0). Your Firmware cannot be upgraded."
    I tried again, only I selected just the SMC update instead of both. Same result. I downloaded the package and tried to install directly instead of going through Software Updater, same result. I tried installing the EFI update by itself using different methods. Same result. Using advice from another thread, I tried opening the firmware updater application directly from the utilities folder. Still get the same error.
    Anyone have any additional suggestions?

  • Macbook (late 2006) RSS unable to install SMC firmware update

    Hello,
    I bought my macbook on the 27th of December, and the first week it worked fine. Then started the RSS. I did some googling and found out some stuff about RSS, tried to install the SMC firmware update but it would just tell me that I don't need the update. After two weeks of constant RSS:ing I called applecare and told the guy about the problem, he told me to try to update the SMC and if I can't do it bring it in for service.
    Monday the 15th of January I went to the macstation in downtown Vancouver and told them about the trouble, they tried to boot it, and it actually booted but after like 3 minutes the macbook crashed. For about 10 minutes two guys tried to boot it and so on, but they didn't get it to boot. So they took it in for service and somebody was going to check out the macbook and see if it would need a replacement logic board - which it did. So on Monday they ordered the logic board, and today Monday 22nd of January I got it back. Now the thing that bothers me is that when I now try to update the SMC firmware (my current version is btw 1.13f3) it still just says that This computer does not need this update. oh well - i went to apples support page to try to see if there would be a newer release of the smc and then I noticed that in the bottom of the SMC firmware 1.1 update page it says:
    Note: This update is only or the original MacBook, and will not install on a MacBook (Late 2006).
    Then I really was like W T F?!
    I would assume that people who work for apple would know that the SMC update will not update on a computer from late 2006, but nobody ever mentioned this to me.
    I've now had the computer for about an hour and the CPU temperature is at about 50 degrees celcius, with firefox, msn and a terminal open... about 5% cpu load.
    What I'm really wondering is that is there anyone who has similar problems with a macbook late 2006? I guess I'll just have to see if it works and just like I told the guy at macstation, if it starts RSS:ing again I'll be banging on their door
    macbook 2,1 Mac OS X (10.4.8) rss, unable to install SMC firmware update
    macbook 2,1   Mac OS X (10.4.8)   rss

    See if reviewing the installation instructions provides any help:
    http://www.apple.com/support/downloads/macbookefifirmwareupdate10.html

  • Mac Pro SMC Firmware Update 1.1 keeps repeating

    Recently I had my MacPro motherboard replaced by an Authorized Repair Center, and for the most part, everything has been working great since.  That said, as I've been performing my regular software updates, I've noticed that the "Mac Pro SMC Firmware Update 1.1" keeps appearing as new update.  I've installed this update multiple times now (or it seemed as though I did), but it keeps appearing with each new update.
    Is there some way I can complete the update?  Is it possible that there is some serial number conflict between my old/new motherboard that is preventing this?  Do I need to return my machine to the repair center?
    Thanks for any help.

    Did you actually run the update from your Utilities folder (where I believe it ends up)? You'll go through a process of rebooting and hearing the long tone / seeing grey screen and progress bar. Until it's actually run properly, you'll keep seeing reminders.
    Matt

  • MacBook Pro SMC Firmware Update 1.3 update freezes mouse pointer

    After installing the update released today 5/28 (MacBook Pro SMC Firmware Update 1.3) my mouse pointer stalls, freezes on occasion. Very annoying. Anyone seeing the same. Fixes ... ?

    After applying the SMC Firmware update a few days ago, my keyboard and trackpad were acting erratic (freezing, hanging). It was immediately after the update and I had not had any problems with it before.
    I have also had random crashes, inability to use the keyboard/trackpad ever since.
    Today my keyboard and trackpad are completely unusable, external mouse works fine.
    I will take it to an Apple store tomorrow, hopefully my firmware can be reverted.
    Sounds like a lot of other people are having problems with this update. http://discussions.apple.com/thread.jspa?messageID=9549034&tstart=0#9549034

Maybe you are looking for