How to reinstall stock firmware for Lenovo ideatab A3000-H

Is anyone help me Please? I lost firmware of my lenovo ideatab A3000-H new model. I want to reinstall. Please help me.

Hi Hasheb,
Welcome to Lenovo Community Forums!
I’m sorry to hear that the inbuilt memory of the Tablet is displayed low, below is the link where it explains the reason for the same and I suggest you to update software in the tablet by connecting it to a Wireless network and then go to Settings > About phone > System update > Online update.
Why is my device internal storage less than advertised?
Do post us back for further queries.
Best Regards
Shiva Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Similar Messages

Need english firmware for Lenovo Ideatab A-3000-H quadcore

Hello ,
I cannot find Stock English firmware for Lenovo IDEATAB A-3000-H . I only found chinese firmware here.
Cannot even find on support page.
I tried installing google-apps but everything crashed too, gmail crashes , gtalk crashes , that sucks.
Anyone have some success with A-3000-H?
Thanks

Hi svenjalell
The Lenovo A3800-d is meant to be sold an used only in China.It's a China only model and as a consequence dosen't/won't have a official ROW (rest of the World) firmware.
Chinese models are only in Chinese&English, don't have GAPPS/GMS(Google services like the Play Store/Not allowed in CN) and are full of Chinese apps.
Unfortunately at the moment I'm not aware of a unofficial ''custom'' multilingual ROM/firmware for the A3800-D model.
Also as far as I know the model is TD-SCDMA 3G/TD-LTE 4G = 3G/4G is meant to work only in CN with a certain local provider.That's why it's got the ''China Mobile'' logo on the back.
I know this isn't the answer you were looking for but I haven't got a better one....
....Sorry.
Regards.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as ''ACCEPT AS SOLUTION"!
Unsolicited PM's will not be answered! ....Please post your question/s in the appropriate forum board.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

How to find official firmware for lenovo s920?

Hello!
I was buy Lenovo s920 (smartphone) in China...
Here was just 2 Сhinese languages and English. The seller was made custom firmware with russian language support and now I can not to update official updates.
I have a two questions:
1. Where can I find the official android os ( firmware ) for lenovo s 920?
2. whether the Russian language in the official firmware for my lenovo s 920?

I don't think Lenovo cares to release an update, or respond to inquiries on their forum,
thats what you get for buying lenovo

How remove Special stock indicator for dialog in PO componet overview

Hi
I am creating production order with reference to the sales order (MTO) after creating the production order in component overview special stock indicator is default value is u20181u2019, plz any one suggest How remove Special stock indicator for dialog display in production order component over view, I have already maintained in MRP 4 Dependent requirements ind. for individual and coll. Reqmts as u20182u2019
Thanks
Mohan M

Did you maintain the indiv/ coll indicator as 2 after the creation of planned order / production order? If yes, then re-create the order & then check.
If not, then check in BOM Item details if you have maintained them to be as individual.
Check & revert.

How to reinstall Microsoft Office for Mac after new hard drive?

Recently I had a problem with my Macbook Pro, and unfortunately had to purchase a new hard drive and have it installed. This also led to the loss of data and other things, such as Microsoft Office for Mac. I know this is an Apple community, but I get better answers here than at the Microsoft communities so I'm hoping someone can help find out how to reinstall Microsoft Office 2013. I logged onto my Microsft account and it says that there is no record of me purchasing Microsoft Office on that account but I know thats the account that it was purchased on, so i cannot get my product key to reinstall it as directed. Someone please help!!!!

Try calling MS support and explaining the situation, maybe they will issue a new key.
1 (800) 642-7676 (Consumer)
Microsoft Corporation, Customer service
24/7 Microsoft Support - Microsoft.MyPhoneSupport.com
Admicrosoft.myphonesupport.com/
1 (855) 698 3249
Phone Our Tech Support Experts 24/7 For Microsoft Support. Call Now...
Support for Microsoft? - Call Toll Free Now
Adwww.supportdeskwiz.com/Microsoft
1 (855) 760 8099
24x7 Tech Support for Microsoft by SDW.
Microsoft Windows Support - Call US Toll Free
Admicrosoft-os-support.itechline.com/
1 (855) 281 4201
Tech Support for Microsoft Windows.
Live Tech Support - Windows 7 Support - Outlook Support

How to set security type for lenovo working with hotspot?

How to set wireless security type for lenovo laptop working with hotspot?
Since I can connect with the other laptops except this brand.

//add related mutip-part to combine parts
MimeMultipart multipart = new MimeMultipart("related");
//attach a pdf
messageBodyPart = new MimeBodyPart();
fds = new FileDataSource("h:/something.pdf");
messageBodyPart.setDataHandler(new DataHandler(fds));
messageBodyPart.setFileName(fds.getName());
multipart.addBodyPart(messageBodyPart);
//add multipart to the message
message.setContent(multipart);
//send message
Transport.send(message);

How to reinstall Quicktime Plugin for Safari in Mac

I recently deleted all plugins for Safari in Mac, in order to fix unusual (slow at times) speed of safari.
When I watch a trailer at apple.com/trailers, it works fine.
However, when I try to watch a HD version of the trailer, I get this message
"The document “stone-fte1_480p.mov” could not be opened. "
Please advise how to reinstall the necessary Quicktime plugin in order for it work fine like before.

Hi and welcome....
Insert your install disc or your Snow Leopard disc. It should open when it mounts the disc on your Desktop. If not, double click the icon.
Open the Optional Installs folder then the Optional Installs.mpkg folder.
Go through the install process. When you get to Installation Type / Custom Install
Select QuickTime 7
Click Continue. Restart your Mac. Then repair permissions.
Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. That can be ignored. As long as you see, "Permissions Repair Complete" when it's finished... you're done. Quit Disk Utility and restart your Mac.
If you don't have your install disc handy, you can download the QT software here. http://support.apple.com/kb/DL923
Carolyn

How to reinstall e980 firmware by usb

I accident deleted some files in the E980 when rooted, how can I reinstall ATT original firmware by usb. I try to reset to factory setting, still missing some.

Hi there! @john1997
Thanks for posting your concerns. I’m sorry to hear you are having problems with your phone.
I’d recommend trying the LG PC Suite to restore your phone. More information can be found at http://www.lg.com/us/support
Hope this helps!
Charise

How to perform stock posting for a manually created lot?

Dear Friends
I have a material A for which GRN is made before the inspection type 01 is activated in material master. thus no quality lot is created for the material in qa32.But the material has got an inspection plan
But for 240 units of material, we will have to show in sap that 120 pc is rejected and sent to rejection storage and rest are ok and thus should be sent to ok storage location with 321 mt.
Thus i have created a manual lot in qa01. this lot can be found in qa32. I did result recording for the same. but i am not finding stock posting tab page in UD. please tell me how do I post stock in case?
Thanks
Chandra

Hi
120 pc is rejected and sent to rejection storage and rest are ok and thus should be sent to ok
Stock posting is not possible for manual generated lot.
What you can do you can only post/Create Manual Lot only for OK Qty.
Rejected Qty 120 you can do Return delivery through Unrestricted after GR is made(after 101 mvt)
This is only solution.
or
Cancel original GR.
Activate 01 inspection.
Do GR again
I hope this will help you
Regards
Sujit

How to find stock category for a particular material in inventory in r/3

Hi All,
I have found there is no update of some material category from r/3 to bw. when data is loading from ods to cube there is a routine for valued stock i.e., eg: stock category is 'U' then only update to cube other wise no update.. some stock category is missing in ods so those data is not updating to cube so data is not matching from r/3 and bw.. could you any body please let me know where we can check stock category in r/3....
just i want to check the postings in r/3 side for stock category which ever is not update to cube..
I have tried in MB51, MB52, MB5B.. i couldnt find category for a material... if any body knows it please let me know..
Thanks & Regards
Sreekanth
Edited by: sreekanthbulle on Sep 2, 2011 9:39 AM

Hi
Are you investigating Inventory as well..Can you pls share your design and how reconcile to match the data with SAP?
Also how do I refresh data again from begining to do FULL REPAIR? pls help

How to reinstall Dragon Assistant for my Yoga Pro 2

I uninstalled Dragon Assistant from my Yoga Pro 2 due to some driver issue and now I want to reinstall it back. Where can i find the installation program? Anyone can help? Thank you.

split screen only works on metro apps. you need to use the snap for desktop apps. You can run Metro IE and split screen it with MS Word.
Lenovo Y470: i7-2670QM | 8 GB DDR3 1333 MHz RAM | Nvidia GeForce GT 550M | 500 GB 7200 RPM Seagate HDD | ASUS PCE-AC56 802.11ac Network Adapter | Windows 7 Professional 64-bit

How to reinstall Palm desktop for Windows without losing all my desktop data

I use a Palm T|X and Windows XP Pro. I was using Palm Desktop 4.x but decided to upgrade to the latest version. 6.2.2. I have had a lot of problems since then, HotSync does not work properly with CalorieKing and Palm Desktop complains about "switching users" each time I try to open Contacts.
I want to uninstall Palm Desktop 6.x and reinstall Palm Desktop 4.x. I know that my data will be safe if after the new install I tell HotSYnc to have the handheld overright the deaktop. However, what about the programs? Will they also get transferred from the Palm back to the desktop? Will the conduits be set up correctly for Documents to Go, CalorieKing and my other applications, or will I have to reinstall them?
Post relates to:

The programs are still in place, but how does the "new" copy of Palm desktop know they are there? Also, there are copies of the programs that are installed only on the Palm but not the Windows machines in one of the Palm desktop folders that use used to restore data to the Palm T|X. How do I save that data, without having to install all those programs yet again, even though they already exist on the palm?.
Post relates to:

How to reinstall SMC Firmware Update?

Hi,
I've an issue with my fans: after a SMC reset , they're doing fine until I put my MacBook Pro to sleep; then they are stuck at about 2000 rpm, independent of the CPU temperature, so that I've to reset the SMC again to fix it temporarily...
Would like to reapply the SMC Firmware Update to see if this help; does anybody know how to do this, as upon starting the app, it just tells me that I'm already at the right version and there's no Apple Firmware Restoration CD available for the new Macs from late 2008 available (yet).
Any help's highly appreciated!
Thanks and best regards,
Michael

iVmichael wrote:
+My fans are going to sleep fine, they just stay at 2000 rpm all the time (when awake, of course), independent of CPU temp.+
That's quite normal.
haha oh wow... did you guys actually read what OP wrote?
@ OP, read here: http://discussions.apple.com/thread.jspa?threadID=1823105&tstart=45
obviously there's nothing you can do up to get your mbp replaced to hopefully get a working one. i don't think apple will EVER fix this problem, cuz it exists since release. just like many other issues apple never fixed...
Message was edited by: preller

How to upgrade driver/firmware for 3rd party airport card?

I have a Motorola WPCI810g wireless card that i have been using for over a year. Previously in Panther i tried to upgrade to Airport 4.2 to take advantage of WPA, but i ended up having to downgrade back to 4.1 because 4.2 left airport nonoperational. I have been on Tiger for quite a while and only recently noticed that i was automatically upgraded to Airport 4.2, however I do not have WPA as an encryption option (neither when joining, or creating a network). I can only assume it has to do with the firmware on the card but I cant figure out how to update it. I have tried to search these threads but the closest i can come is using Airport Admin Utility to upgrade the firmware on a base station.
About Airport is such:
Airport
427.1.1
Component Versions:
Airport Menu Extra: 427.1.1
Airport Framework: 429.6.0
Airport Extreme Driver: 405.1.0
Airport Admin Utility: 420.5.0
Airport Setup Assistant: 420.6.0
Powermac G3 Rev2 B&W 400mhz, iBook G4 14" 1.33mhz Mac OS X (10.4.9) Pioneer DVR-109, Moto WPCI810G, Nano (1G) 4gb Black

yup, and this is what it says:
AirPort Card Information:
Wireless Card Type: AirPort Extreme
Wireless Card Locale: USA
Wireless Card Firmware Version: 405.1 (3.90.34.0.p18)
Current Wireless Network: wireless network not available
in addition, I found that I can choose WPA as an encryption if i select 'other' as the network. What I would really like to do is create a network with WPA, since i use this desktop to connect my ibook to the internet. so far nothing...

How to create recovery disks for Lenovo H530s with WIndows 8.1

Hello there,
I just purchased a Lenovo Hf30s type 10131 with Windows 8.1, mini tower: http://support.lenovo.com/us/en/products/desktops-and-all-in-ones/lenovo-h-series-desktops/lenovo-h5...
I like to create recovery disks, but the already installed program OneKey Recovery does not have the option of recovery disks, it allows only larger media such as USB stick and hard disks.
Here to I have 2 questions:
1. Is there a way to create a recovery disks that will create the original factory settings with 5 partitions?
2. Does any one knows if the recovery siskd sold by Lenovo (for Netherlands they cost between 23 and 38 Euro) would do the job by creating the factory settings with 5 partitions?
My goal is to reformat the hard disk and aprtitionig it the way I need it, but in case of anything, I would like to be able to go back to the original facttory state of the unit, especially if I have a harddisk failure and neer to replace the hard didks.
Thank you in advance and I wish you a very pleasant and successful day.

Hi Mlenovo,
Welcome to the Lenovo Community.
As per the query we understood that you are looking to create a recovery drive for your Lenovo h530s desktop.
As you have asked for the recovery disk, please refer to the below link this might help you to create the recovery media
Click here for the recovery media.
Hope this helps! Do post us back for further queries.
Best regards,
Ashwin.S
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

How to reinstall stock firmware for Lenovo ideatab A3000-H

Similar Messages

Maybe you are looking for