How to reinstall windows 8 on bootcamp

how to reinstall windows 8 on bootcamp macbook pro, without losing anything on OS (Apple) side

Start Bootcamp Assistant then select the option to remove Windows and return your drive to a single partition. Once Windows is removed start Bootcamp Assistant again and select the option to install Windows. Follow the Bootcamp instructions for installing Windows.
This process will not cause lose of OSx data or applications if done correctly. But as allways, create a good backup of your data because things sometimes go wrong or instructions are not followed causing data lose.

Similar Messages

  • How to reinstall windows 7 in my bootcam partition, it dose not recongnize windows CD                ze

    How to reinstall windows 7 in my bootcamp partition ? it dose not recongize my windows 7 CD...

    Satellite L505D-S5983
    Downloads here.
    Best to restore the hard disk to its original out-of-the-box contents using Toshiba recovery media. All the drivers and utilities are properly preinstalled. Windows is preactivated.
    If you failed to burn recovery discs, you can obtain them from Toshiba. Scroll down to Get Recovery Media here.
    For instructions, see the section Restoring from recovery DVDs/media, which begins on p. 70 of the User's Guide.
       Satellite L500 Series User’s Guide
    If the new hard disk uses advanced-format technology, be prepared to install a new storage driver first thing.
       Intel Rapid Storage Technology
    -Jerry

  • How to reinstall Windows 8 on Yoga 13 with damaged Recovery Image?

    I changed the partitions on my Yoga 13. Now it is not possible to refresh, reinstall or perform an advance start-up, as it looks like there is no recovery image anymore. The systems is currently very messy and needs a reinstall.
    Can someone tell me how to reinstall Windows 8 on the Yoga 13 when the recovery image is lost or damaged?

    hi Chevex,
      Thanks for using Lenovo Community Forums!
    In the event that the Recovery partition is not working the only option is to use the Recovery CD that you can create when you first got the computer.
    but if you were not able to create a Recovery CD and the Onekey Recovery is not working.
    You can get the Recovery CD from the Software Department (Fees may apply to the discs)
    you can contact the Hardware Team again and ask to be transferred to Software team for purchasing RCD
    Lenovo Technical Support (US)
    IDEA-branded and
    B, C, E, G, H, K, N, Q, V, Y Series Products
    English
    1-877-4-Lenovo
    (1-877-453-6686)
    24 hours a day
    7 days a week
    Hope this helps,
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • How to reinstall Windows 10

    Hi, I have a laptop with Windows 8 in the factory image.I installed Windows 10 but had some issue with 3rd party softwares. It's a general question, not related to a laptop model.  How to reinstall Windows 10 ? Do I need to put back the factory image ? It's seems the Windows 10 upgrade works only with Windows 8.1 With the factory image, the steps will be: -Restore the factory image
    -Install all windows update in Windows 8.0 to get the Windows 8.1 update
    -update drivers
    -Install Windows 8.1
    -Install all windows 8.1 update to get Windows 10-Install Windows 10
    It's seems to be a very long process.
    What's the recommended way to reinstall Windows 10 ?
    Thanks

    I don't want to do a clean. I don't want to install every driver. Is it possible to upgrade the Windows 8 factory image (not 8.1) directly to Windows 10, keeping all drivers ?  There is 144 important update in Windows 8, only to have access to Windows 8.1 installation page in Windows store.  I don't want to take one week to install Windows 10

  • How to Reinstall Windows on Existing Bootcamp Partition

    I've been running Windows 7 under Bootcamp on my 2011 MacBookPro. I've run into a situation where Windows7 will no longer install updates. I worked one day with Microsoft for over an hour but they could not find what was causing the problem. FYI, when looking into this problem, the error code that is produced is Error Code 8007010B. I have found nothing substantial online in regards to this code.
    I've used Winclone (a Mac application) in the past without issues to restore a Boot Camp Windows partition. Since purchasing Winclone 3.4 I've made several backups, but now that I am actually trying to restore one of those backups I'm getting a message:
    "the image you are attempting to restore does not contain the correct information".
    So I am frustrated and have emailed twocanoes.com, the Winclone publisher and waiting for their answer.
    Working with Bootcamp
    I'm trying to figure out the steps I need to reinstall Windows from scratch in an existing bootcamp partition. Do I need to start from scratch with Bootcamp, or can I reinstall Windows from inside Windows? If I do the latter, how do I prompt Bootcamp to reinstall the Apple drivers?
    Other Issues FYI
    I'm having trouble locating the Windows 7 instal DVD I originally purchased. I do have the serial number. So I've downloaded a copy of Windows 7 from the  MyDigitalLife Windows7 Repository.
    I have burned the iso image to a DVD. I've got 2 versions, one is the .iso file burned onto the DVD, the other are the contents of the .iso file burned to DVD. I assume to install Windows, it will want the one with the contents of the Windows installer burned to it? Any other issues I may be unaware of regarding this kind of Windows install?
    Is there any advantage of reinstalling Windows from a USB Flash drive as compared to a DVD? Just curious.
    Finally, for Activation, because this copy of Windows is going back into the same Bootcamp partition on the same hardware, will I have to reactivate Windows? If so, suggestions appreciated.
    Thanks!
    -Dave

    I appreciate the help. Can you tell me what are the steps to tell Bootcamp to install drivers into a Windows install? Thanks!
    Update: I looked at the Bootcamp Assistant instructions and now I understand your answer. Info here:
    "Step 4: Install the Windows support software
    After installing Windows, install Mac drivers and other support software for Windows. The
    support software installs Boot Camp drivers to support your Mac hardware, including AirPort
    devices, the built-in camera, the Apple Remote, the trackpad on a portable Mac, and the function
    keys on an Apple keyboard. The software also installs the Boot Camp control panel for Windows
    and the Apple Boot Camp system tray item.
    You can download the support software by selecting the “Download the latest Windows support
    software from Apple” option in Boot Camp Assistant. The support software must be copied to a USB flash drive formatted in MS_DOS FAT. If the installer does not start automatically, doubleclick the setup.exe file in the Bootcamp folder."
    If you or anyone have any other tips, they would be appreciated. As this appears to happen with Windows quite frequently, and I've had to do it multiple times over the years, I'm not looking forward to it.
    Added Update info. Message was edited by: Dave Peck

  • How to reinstall Windows XP against Bootcamp for a Macbook

    I am a new switcher for Mac OS. My major work has always been completed in XP OS. but recently I suffered a frequent down for XP OS. What should I do to reinstall a XP with Bootcamp?
    1. My macbook was installed with old version of bootcamp, should I remove this older one and reinstall a new one?
    2. How to remove bootcamp from a Mac OS?
    Better provide me a detailed guide to secure this reinstallment.THANKS EVERYONE.

    If you launch Boot Camp Assistant, you will see that one of the choices on the first screen is to "Restore the startup disk to a single volume". Click on that and follow the directions. That will remove Boot Camp and Windows XP from your Mac.
    You can then launch Boot Camp Assistant again to reinstall Windows.
    If what you are saying is that you want to only update Bootcamp to the latest version (1.1.1) you do not need to remove your Windows partition and start over.
    If you only want to update, go to this page and follow the instructions marked "Updating to Boot Camp 1.1.1 beta".
    http://www.apple.com/macosx/bootcamp/
    PD

  • How to reinstall Windows 8.1 on Bootcamp?

    I am trying to reinstall Window 8.1 on Bootcamp after Disk Utility reported that the hard drive it was originally located on was failing and needed to be replaced. I did so. Now when Windows 8.1 installer launches, it thinks I'm doing an upgrade and insists that I "reboot Windows Normally" and then launch the Installer, which is impossible because it's freshly formatted, NEW hard drive.
    Here are the steps that I followed:
    1) Disk Utility reports that Boot Camp drive is failing and replace it.
    2) Remove failing hard disk, replace with new one.
    3) Launch Bootcamp Assistant.
    4) Download support drives to USB stick.
    5) Begin install process using same Windows disk (64-bit FULL VERSION) used previously.
    6) Windows Installer asks for Product Key.
    7) I enter product key.
    8) WIndows asks to agree to license terms.
    9) Setup presents ONLY two choices:
         Upgrade Installation
         Custom Installation
    10) I choose Upgrade.
    11) Windows Setup reports that Upgrade can only take place from Windows environment, to eject Windows Install disk, and to reboot into Windows "normally." Cannot eject Windows install disk. Click Close box.
    12) Windows Installer relaunches.
    13) Install process starts over again.
    Please note:
    1) This is a fully licensed copy of Windows 8.1
    2) I am using it on the same Mac as the original installation. Only change is the hard drive.
    3) This is not an authentication issue. Windows accepts the Product Key.
    4) Parallels is not involved in any way.
    I have talked to several Windows support teams. None were helpful and ultimately said this was a Bootcamp/Apple problem
    Apple Support was much more helpful but said they'd never encountered this problem before and were flummoxed.
    I have reformatted the Bootcamp hard disk several times. At one point I thought the issue might be that the Mac still thinks the original Windows installation exists because I kept the same name for the new hard disk. Renaming and reformatting did not change the behavior.
    Does anyone have any suggestions?

    I wound up solving, or at least working around my problem. Selecting "Custom Install", instead of Upgrade, took me to a dialog box where  Installer could format the Bootcamp drive from scratch. Installation then proceeded as expected. Unfortunately this cost me my partition, but that was better than being stuck in this Upgrade Catch-22. Note that formatting and partitioning this drive within the Boot Camp assistant did not solve my problem.

  • How to reinstall Windows 7 in Boot Camp without DVD?

    Windows 7 in bootcamp really stinks......
    Many problems like:
    -WMP 12 crashes (always)
    -Screen flickers
    -Boot screen errors
    and many more....
    i have used Parallels Desktop 6 and uninstalled it.
    pls help, i'm no Mac pro.
    just bought mac mini a few months ago and i never use Mac OS X Lion.
    Is it possible to reinstall windows only using ISO disc image?

    If it is a Mini with Lion, get Parallels 7.  Works like a champ
    on all my Macs. 
    If Bootcamp install of Win7 "stinks", how did you install it
    in the first place to know that, as Bootcamp installs run native?
    Or do you really mean that you tried Parallels and want to
    do a native install using Bootcamp?
    Some loose ends here that seem somewhat confusing.
    Also, exactly what Mini do you have?  I have a 2010 Mini
    that runs Win7 Pro 64 bit like a champ, in Bootcamp.  Watch Blurays
    with PowerDVD11 quite often.

  • Got new harddrive under warranty how to reinstall windows 8???

    i have a g505s
    i received a new harddrive today and 4 recovery dvds two are labeled disc 2 and have a different part #. the others are disc 3 and disc4
    how do i reinstall windows 8?

    I wound up solving, or at least working around my problem. Selecting "Custom Install", instead of Upgrade, took me to a dialog box where  Installer could format the Bootcamp drive from scratch. Installation then proceeded as expected. Unfortunately this cost me my partition, but that was better than being stuck in this Upgrade Catch-22. Note that formatting and partitioning this drive within the Boot Camp assistant did not solve my problem.

  • Satellite A110 - How to reinstall Windows XP?

    Hi,
    I have a very serious problem. I had to format my hard drive, and now, I want to reinstall Windows XP OS on my machine. The serial key is written under my keyboard, but I don't know how to specify it during the installation process.
    Can i write an email to Toshiba asking for a new DVD copy of the OS?
    Thanks in advance.
    Dani

    Hi
    Im a little bit confused now. Why do you want a new installation disk if you dont know how to use the product key on the bottom side?
    Do you have a XP disk at the moment?
    The product key on the bottom side of the notebook cant be used with a normal XP installation disk that you can buy in every computer shop. This is an OEM key and belongs to the preinstalled XP version.
    So you can ask an authorized service provider for a new recovery disk or you buy a normal XP disk but then you have to use the product key that is delivered with the XP disk.

  • How to Reinstall Windows XP on Compaq Mini CQ10?

    Hi,
    I've lost all data on  my Compaq Mini CQ10-110SL. I need reinstall Windows XP Home but I'havent original installation CD and the CQ10 has not a recovy hidden partition. How restore windows xp? If i uses another windows cd  and use the registration key under the laptop , the  windows registration don't work!
    Thank you in advance
    Stefano

    Call HP and order Recovery kit of your Notebook which would have OS and factory shipped software which went with the notebook. You will get recovery kit for a nominal charge of 15$-25$ depending on type of shipping 
    //Click on Kudos and Accept as Solution if my reply was helpful and answered your question//
    I am an HP employee!!

  • How to start Windows in Bootcamp?

    Hi,
    I have installed Windows succesfully with bootcamp and I do know how to start Windows on start up. But when I restart with the option key held down, select the Windows system and push the button with the straight arrow, Mac Os X starts and not Windows.
    Does anyone have the same problem? And how can I fix this?
    I know that I can also open the Startup Disk pane of System Preferences and then select the Windows system, and restart the computer. But Why doesnt it work on start up?
    Thanks in advance.

    https://www.youtube.com/watch?v=rMDjZQqz-i8
    Steps:
    1-Open command prompt with admin mode
    Or Boot from DVD in command prompt mode.(This is what i experienced, able to show the safe mode menu)
    2- Write this command "bcdedit /set {default} bootmenupolicy legacy" and click enter
    3- You can now press F8 while Windows 8 starts in order to access Safe Mode and other Advanced Boot options.

  • Macbook bad DVD drive how to install windows in bootcamp

    My macbook has a bad DVD drive. I just upgraded it to snow leopard and want to install windows using bootcamp. Unfortunately when the windows installation starts the machine reboots but does not seem to be able to detect the windows disc in an external dvd that I have attached to it. I tried two different usb dvd readers and finally a firewire one I had laying around to no avail.
    without the DVD drive working, how can I get it to install Windows?
    thanks very much in advance for any help

    Hi Amy
    Welcome to Apple discussions.
    This particular forum is for student software developers so you might not get an answer to your question. I suggest you post it again, but this time to one of the Boot Camp forums. Maybe someone there will have the answer you want.
    Best wishes and good luck
    Bob

  • Reinstalling windows on bootcamp

    i use imac with tiger os x10.5. recently i reinstalled the os and bootcamp. the bootcamp will not install vists ultimate. when it restarts on install command it is stuck on the white screen flashing apple, stop and querry mark on the screen. sometimes it goes back to the mac os instead of installing windows. i checked bootcamp patition format and it is ms-dos. please what can i do to get windows installed?

    I was unwittingly sold an illegal OEM Windows 7....I'm going to buy from a more reputable source and install Windows 7 Retail version (buying software in Vietnam is a nightmare).
    I was planning on using Mac Disk Utility to do one of two things to reinstall Windows 7:
    a) Restore to single Mac Partition
    or
    b) Erase the disk and create a single partition for Windows (not sure I want to use this option as I'm not sure if it affects the Mac partition).
    After running one of these options I was just going to run the Bootcamp Windows installation like I did the first time....
    So are you saying I don't have to do this?
    Can I simply log into my Windows Bootcamp Partition and boot from DVD and format/install? I assume this erases everything on Windows Partition and installs Windows 7 over the old illegal version?
    Of course I will back up all data (windows and mac)
    Thanks for your help (just bought Mac a month ago for first time).
    Brad

  • How to reinstall window 8 on Hp Envy m6 Notebook

    we need to reinstall windows 8 on formatted disk how do we do this. 
    The disk has been removed and formatted. Restore did not work and created a partition that blocked off all our memory access.  Now we can not get it to restart to windows 8

    Was the laptop delivered from the factory with Windows 8? If so the Key Code is embedded in the BIOS. All you have to do is download this .iso and make a DVD from it which will work to install an official licensed activated copy of Windows 8:
    https://docs.google.com/a/ericspellmann.com/uc?id=0B0W9PBigPy94aVJWSndyTFNFMzg&export=download
    If you need help burning an .iso to a DVD let us know. You can't just copy the .iso file to disk. It is kind of like a .zip file and has to be unpacked and reassembled into a DVD with special software.
    If this is "the Answer" please click "Accept as Solution" to help others find it. 

Maybe you are looking for

  • RFC ERROR       timeout during allocate

    Hi all, We are trying to connect our ECC 6.0 system to ECC 5.0 system thru RFC we get the following error. Both the systems are available running Timeout during connection setup. Please check partner availability [abrfcio.c    8139] A  *** ERROR => R

  • My photo stream is not working correctly.  only importing some..help?

    my photo stream is only importing some of my photos...settings all seem to be correct..any advise?

  • Mains charger requires a closed lid to start charging

    real puzzler this one: Both the charger and the battery have been replaced and have been tested with other machines and work beautifully. On my machine: the mains charger will stop working if unplugged and then plugged in during a session. So if I un

  • What is port with " ++ p"

    There is a 'port' on the back of the computer that looks like an HDMI connector, but it has two plus signs (one above the other) and the letter P to the right of them. I've tried to plug an HDMI cable into it, but it doesn't quite fit. Please help me

  • I cannot open app store and safari

    I need help with my imac, i cannot open app store or safari, there is no software update option when i click on the apple. I recently upgraded to Yosemite. I also did clean my imac. What shall i do? thanx.