How to release the blocked material from physical inventry

hi,
when i try do post goods issue ...i get this message
Material blocked in physical  inventry.
kindly help me.

Hi,
Use MI22 to find the open stock count document and either post the count (as suggested), or if the count is no longer require flag the inventory document as deleted in MI02 (if the count has been entered you can use MI07 to post the difference.
But all of this should only be done if you have checked with whoever controls your stock counts.
Steve B
(Points not required)

Similar Messages

  • How to Release the blocked Sales orders?

    Hi Gurus,
      Requirement: To Release the Blocked Salesorders
      problem: find out  any Tables  and procedure  to release blocked SO(allow to creating delivery for SO).
    how to Customer CreditLimit  and  Tables  of Theses...............
    Thanks in Advance..
    sivakumar.kasa

    Hi..
    AS per i knew......
    how to know cutomer CreditLimit?
    FD32,FD33...tcodes
    how to release blocked Sales order?
    VKM3
    Wait for some other views

  • How to release the sunidm project from the server while debugging

    Hello,
    I am using NetBean to work on the SunIDM project. Each time I have to restart NetBean if I want to run/debug the project. I have tried to use GlassFish and Tomcat, but both server somehow still holding the project even I stopped debugging in NetBean. Is there a good way to have the server release the project so I don't have to restart NetBean? It make my debugging time so slow.
    Thank you so much.

    Hi,
    I you have ur request no, please goto se09 or se10,
    request status must be MODIFABLE,
    -> locate ur request no, release by clicking ur request and then clicking RELASE DIRECT truck in application tool bar.
    -> click or refresh
    -> Login to ur production server
    -> goto STMS_IMPORT click on the PRD server
    -> Locate ur request,
    ->Select using the select SELECT with arrow in application tool bar
    ->then click on the request IMPORT REQUEST truck or CTRL + F11.
    regards,
    Prabhu
    reward if it is helpful.

  • How can I remove the blocked contacts from skype h...

    Peace be upon you
    How can I remove the blocked contacts from skype home and all skype features?

    I found this solution and it worked.
    Paul B. Adams
    Re: safari 6.0 flash problem (blocked plug in) 
    Jul 26, 2012 7:39 AM (in response to defconnect5)
    I have a new MacBook Pro and I followed these instructions, downlonading and installing the new Flash plugin. But when I looked in "/Library/Internet Plugins" there was no folder called "Disabled Plugins".
    However, I did see two versions of Flash:
    _Flash Player.plugin with old date
    Flash Player.plugin with todays date
    I deleted _Flash Player.plugin and this fixed the problem.

  • Anyone know how to stop the "activate" box from blocking usage of a perfectly legal copy of Ilisten? I want to help my dyslexic grandson and this box, including the activation code, keeps popping up, keeping me from using the software. I activated the pro

    Anyone know how to stop the "activate" box from blocking usage of a perfectly legal copy of Ilisten? I want to help my dyslexic grandson and this box, including the activation code, keeps popping up, keeping me from using the software. I activated the program and did a few profile building sessions, now it pops up each time I start the program, blocking me from using it. Help sure would be appreciated.
    Jay

    I looked at your post this morning and did not know enough to respond, other than to find out that links to iListen now go to newer, renamed software. Considering it's been nine hours with no response, I'm suspecting few people here have experience with that software. You could contact the current copmany that used to sell that package and see if they have any archived support info.
    BTW: please check you entry for "Mac OS" in your profile. It says iOS, which cannot run on an iMac. iOS is the system for phone and iPads but can't run on Mac computers. Do "About this Mac" from the Apple menu and see what it says about the OS version. Should look like this:
    If the "Processor" line says "Intel," you have a newer Mac than the old modles this forum covers; Intel iMac have their very own forum here:
    iMac (Intel)

  • How to transfer Shelf Expired Material from QC Pending Location

    Dear Sap Experts,
    Scenario
    Currently the stock is lying in Quality Pending Location with Inspection Lot
    Against Inspection lot, MIC recorded;
    But system not allowing Usage Decision because shelf life is expired
    Now the Questions are
    1. How to make Usage Decision or
    2. How to Transfer "Shelf Expired Material" from QC Pending Location without changing Expiry Date.

    Dear ramana
    Please try with QA07 with intial run in days as 1and also the reason code
    If the materials are not batch managed the material will be transfered to Block or if it is batch managed it will make restricted.
    Please try and let me know
    Regards
    gajesh

  • How to get the amount of free physical memory?

    How to get the amount of free physical memory?
    (without sudo or root)

    vmstat will give it to you.
    Although the question depends a bit on what you mean by free memory.
    The figure vmstat labels free (in any reasonably recent version of solaris) actually represents memory mostly filled with cached file contents. So it represents memory that can be easily released if needed by something more important.
    Like most unix versions, solaris will use any free memory to cache files thats have been read/written previously just in case they are needed again

  • How to release the budget in SAP Funds Management

    Hi
    How to release the budget in SAP Funds Management. Please let me know the proceedure and the transaction code
    Tks

    Hi,
    The answer depends on if you are using Former Budgeting or BCS.
    1) If you are using Former Budgeting:
    a. You should use transaction FR51 to enter Release or FR55 to distribute it.
    2) If you are using BCS:
    a. Within FMBBC transaction you have the option to release the budget, use document type as REL (release).
    b. You can activate the automatic release for each budget profile in Customizing of Funds Management Government.   To do this, in IMG select Funds Management Government ® Budgeting and Availability Control (Former Budgeting) ® Budget Profiles (Former Budgeting) ® Set Up Budget Profiles.
    With the automatic release, the corresponding background releases for expenditures FM account assignments with budget transfers are also posted. Take note that the maximum amount that this automated release can transfer from the sender is the amount that has already been released.
    If you do not activate the automated release, the maximum amount that can be transferred from the sender is that which has not yet been released.
    c. You can use the mass transaction for release, which is FMMPRELE.
    I hope that this answer your inquiry.
    Best Regards,
    Vanessa Barth.

  • How to get the unoccupied material number in a number range

    How to get the unoccupied material number in a number range.for example, I wang to get a number between 1500000 and 1599990 which is unoccupied as my material number to be created. Is ther any FM or codes?

    Dear,
    You can get this information from Tcode SNUM or you can access database table NRIV.

  • How to release the Change request (Task in Repair Mode)

    Hello everybody,
    I have change request in that one Task in Repair mode.
    when i trying to release, it give the error message like
    Repair HRDK900911 may only contain repaired objects
    Diagnosis
    In repairs, you can only lock and edit those objects whose original exists in another SAP System.
    The object R3TR PROG /VWK/GPS_VCD_R was found in the object list of your repair HRDK900911. This object is not a copy but the original.
    So please suggest me
    How to release the Task (Repair) so I can release  the request.
    Thanks

    Yes you wont be able to release the request till you remove the flag from SE03.
    Goto SE03 > Display Repaired Objects
    Select Your object and remove the repair flag from top <Repair Flag>
    R3TR PROG <Your Object>
    Also as you are getting an error
    No valid change license available for namespace
    In SE03-->Display/change Namespace
    when I check the specified Namespace then their is no Repair License.
    So please suggest me Repair License is required?
    check what namespace it is refrerring to ... A namespace name should be there....
    1. Go to SE06 and click on the System Change Option.
    2. Verify that Namespace Systems Development  /Namespace/  is "Modifiable".
    or
    1. Run transaction SM30
    2. Enter V_TRNSPACE
    2. Click Maintain
    3. Double Click on Namespace /NAMESPACE/
    4. Change Namespace role from P to C, then hit Save
    All the best !
    Edited by: prateek_y on Aug 30, 2010 3:21 PM

  • How to transfer the http request from applet to servlet/jsp

    I use the JTree component to create a navigation of a website,but i don't
    know how to connect the tree's nodes with the jsp/servlet.
    I mean how to transfer the http request from the applet to a jsp.
    I use the "<frameset>" mark which will divide the web browse into 2 blocks.
    The left side is Applet,and the right side is the linked jsp page.
    what I say is as the weblogic console layout.
    who can help me!!!
    Thank You!

    I use the JTree component to create a navigation of a website,but i don't
    know how to connect the tree's nodes with the jsp/servlet.
    I mean how to transfer the http request from the applet to a jsp.
    I use the "<frameset>" mark which will divide the web browse into 2 blocks.
    The left side is Applet,and the right side is the linked jsp page.
    what I say is as the weblogic console layout.
    who can help me!!!
    Thank You!

  • Is there are BAPI to release the blocked business parter ?

    Is there are BAPI to release the blocked business parter . ?
    thanks ,
    naval Bhatt

    Hi,
    Then create a subtype of that BO.
    Write a custom method. In that method use a BDC program.
    First develop the BDC program and save it as a FM.
    Then call this FM in your custom method and pass the data from workflow.
    Make this method as background processing.
    I think this should do the rest job.
    Regards,
    Raj

  • How to find the group ids from which the mail has been sent

    Hi,
    We are able to see the list of mails have been sent to respective mail ids with the help of tcode SOST.
    Is there any way to find through which group ids the mails have been sent.
    Tehe details showing as the mail has been sent by Batchusr.
    Please suggest how to find the group id from where the the mails have been triggered.
    Regards,
    Jena.

    Hi
    This is not helpfull
    If you open any notification QM03, there you will get tab " Action Log"
    If you click on action log , there are two fileds
    Date and time for task release
    I want to fetch these fileds in one of Z report.
    I am unable to find table name for these two fileds
    Task release Date
    Task release Time
    Can we add 'QN CHANGE DATE' parameter in the selection screen (just like QN creation date) w/ range?  The user want to run the report by QN change date as well.

  • How to retrieve the item text from VL03 transaction .

    How to retrieve the item text from VL03 transaction .
    The requirement is like this, the item text thus retrieved should be printed in the script under the item.

    Jagadieshwar,
    Use <b>READ_TEXT</b> function module to get the proper item text of Delivery.
    <b>ID</b>: Probably you want 0002 (Item Note), but it depends which text you want Item Note, Material Sales Text ,etc..
    <b>NAME</b>: CONCATENATE Delivery Doc. Number + Delivery Item Number (e.g. 0080001729000010)
    <b>OBJECT</b>: VBBP
    <b>
    LANGUAGE</b>: sy-langu or whatever you want.

  • How to get the query values from the url in a servlet and pass them to jsp

    ok..this is the situation...
    all applications are routed through a login page...
    so if we have a url like www.abc.com/appA/login?param1=A&param2=B , the query string must be passed onto a servlet(which is invoked before the login page is displayed)..the servlet must process the query string and then should pass all those values(as hidden values) to the login jsp..then user enters username and pswd, then there should be another servlet which takes all the hidden values of jsp and also username and pswd, authenticates the user and sends the control back to that particular application along with the hidden values...
    so i need help on how to parse the query string from the original url in the servlet, pass it out to jsp, and then pass it back to the servlet and back to the original application...damnn...any help would be greatly appreciated...thanks

    ok..this is the situation...Sounds like you have a bad design on your hands.
    You're going to send passwords in a GET request as clear text? Nice security there.
    Why not start with basic security and work your way up?
    %

Maybe you are looking for