How to release the contract.

Hi all,
I need to release the contract.
ME31K
ME32K
ME33K
can any bost=y tell me the procedure.

Thanks

Similar Messages

  • How to release the budget in SAP Funds Management

    Hi
    How to release the budget in SAP Funds Management. Please let me know the proceedure and the transaction code
    Tks

    Hi,
    The answer depends on if you are using Former Budgeting or BCS.
    1) If you are using Former Budgeting:
    a. You should use transaction FR51 to enter Release or FR55 to distribute it.
    2) If you are using BCS:
    a. Within FMBBC transaction you have the option to release the budget, use document type as REL (release).
    b. You can activate the automatic release for each budget profile in Customizing of Funds Management Government.   To do this, in IMG select Funds Management Government ® Budgeting and Availability Control (Former Budgeting) ® Budget Profiles (Former Budgeting) ® Set Up Budget Profiles.
    With the automatic release, the corresponding background releases for expenditures FM account assignments with budget transfers are also posted. Take note that the maximum amount that this automated release can transfer from the sender is the amount that has already been released.
    If you do not activate the automated release, the maximum amount that can be transferred from the sender is that which has not yet been released.
    c. You can use the mass transaction for release, which is FMMPRELE.
    I hope that this answer your inquiry.
    Best Regards,
    Vanessa Barth.

  • How to determine the contract header's valid period...

    1. How to determine the service contract header's start date, end date, when related muliple items with different start date and end date?
    i.e., what is the different between the header's valid period and item valid period?
    For example:
    Sold to A has 5 items, which has different contract line item start date and end date, e.g.,
    item 2: 2010.9-2011.9
    item 3: 2011.4-2012.4
    As for combined the all item bolonged to sold to A to one contract, so the item should have different contract start date and end date.
    However, how to determine the contract header's start date and end date?
    2. Another question is: When process service contract data migration from legance to CRM, how to design the above scenario logic?
    Thanks in advance,

    Sent again, to wait the answer....

  • How to release the Change request (Task in Repair Mode)

    Hello everybody,
    I have change request in that one Task in Repair mode.
    when i trying to release, it give the error message like
    Repair HRDK900911 may only contain repaired objects
    Diagnosis
    In repairs, you can only lock and edit those objects whose original exists in another SAP System.
    The object R3TR PROG /VWK/GPS_VCD_R was found in the object list of your repair HRDK900911. This object is not a copy but the original.
    So please suggest me
    How to release the Task (Repair) so I can release  the request.
    Thanks

    Yes you wont be able to release the request till you remove the flag from SE03.
    Goto SE03 > Display Repaired Objects
    Select Your object and remove the repair flag from top <Repair Flag>
    R3TR PROG <Your Object>
    Also as you are getting an error
    No valid change license available for namespace
    In SE03-->Display/change Namespace
    when I check the specified Namespace then their is no Repair License.
    So please suggest me Repair License is required?
    check what namespace it is refrerring to ... A namespace name should be there....
    1. Go to SE06 and click on the System Change Option.
    2. Verify that Namespace Systems Development  /Namespace/  is "Modifiable".
    or
    1. Run transaction SM30
    2. Enter V_TRNSPACE
    2. Click Maintain
    3. Double Click on Namespace /NAMESPACE/
    4. Change Namespace role from P to C, then hit Save
    All the best !
    Edited by: prateek_y on Aug 30, 2010 3:21 PM

  • In my iPhone 4 the mute is getting on automatically dont know how to release the mute

    In my iPhone 4 the mute is getting on automatically dont know how to release the mute

    Have the same problem with every phone call since going to IOS7 - think my face is touching the mute on the screen but I am unaware that it has happened and keep talking until I realise the other side has hung up as they can't hear me - extremely frustrating. Then when the other side calls back, I don't hear the call as it is muted!! Is there a fix for this or a way to move the mute button??

  • How to find the Contract Start date

    Hi Friends,
    with the help of the Transaction type, Item Category,reference Interest rate, how to find the Contract Start date/Billing Strat date and the Contract number.
    Regards,
    Raju.

    Hi
    naj you can find the contract start date and billing date in crmd_order Financial details data tab, start of contract and Billing and the contract no u will find after Approval of Eligibility Norms, then save go to actions create certificate of acceptance the you will get contract number
    Reward with Points
    Venkat

  • Can give me the details how to release the transport request to the qa

    can give me the details how to release the transport request to the quality server pr production server
    thanks

    Hi,
    Use transaction SE09. Here select "modifiable" .Then click -Display.
    Now you get a list of all requests which can be released.
    Locate your request number and drill down. Release the sub-request first and then the main request by selecting and using the "transport" icon.
    Muraleedharan.R
    091 9880028904

  • How to release the task and Transport

    Hi can anybody tell me the steps , how to release the task and how to relase the Transport into Quality.
    Thanks in advance.
    kp

    Hi,
    Go to SE09..
    Give your user name..Press enter..It will display all the CRs..
    Place the cursor on the task of the CR you want to release..
    Press the transport button (F9)..
    Do the same for all the tasks..
    Then place cursor on the CR..
    Press the transport button (F9).
    Now the CR is released...
    You can basis team to import the CR to quality system using the transaction STMS.
    Check this link for using the STMS
    http://help.sap.com/saphelp_nw04/helpdata/en/44/b4a3c57acc11d1899e0000e829fbbd/content.htm
    Thanks,
    Naren

  • How to release the idoc segements version

    I added some extra fields to an existing segment of an idoc. While saving it created a new version. Now there are two versions : one is released and another is not. First one has the older fields and in the second one new fields along with the old fields
    how can I get only one version with the latest changes. Segment with the additional fields.
    Please advice.

    When I am trying to release that , it is saying 'A released version is already there for the segment'. So not able to release.
    Can you please tell me how to release the changes.
    Thanks

  • Release the Contract - VA42

    Hi all,
    I am getting few migrated contracted into ECC. These are initially the User status is in 'LOCK' at header and item level. For this contract a WBS element is linked. The initial WBS status is "CRTD".
    I have created a report program to change the user status from "LOCK" to "ACT" both at header and item using FM: "I_CHANGE_STATUS". When header and item are in ACT status, I am releasing the WBS using FM: "BAPI_BUS2054_SET_STATUS". It was able to release the contract successfully. I have used call transaction to "SAVE" the contract.
    But in the WBS element, the basic dates and Personnel Responsibility are not getting populated even though it is having the valid data at item level.
    I did the same steps manually in VA42. The basic dates and Personnel Responsibility are getting populated from item data.
    did I miss something in my report program? is there a BAPI to save the contract (VA42)?
    Let me know if I need to give more explanation to understand the issue.
    Regards,
    Shiva.

    I have fixed this issue.

  • How to Release the blocked Sales orders?

    Hi Gurus,
      Requirement: To Release the Blocked Salesorders
      problem: find out  any Tables  and procedure  to release blocked SO(allow to creating delivery for SO).
    how to Customer CreditLimit  and  Tables  of Theses...............
    Thanks in Advance..
    sivakumar.kasa

    Hi..
    AS per i knew......
    how to know cutomer CreditLimit?
    FD32,FD33...tcodes
    how to release blocked Sales order?
    VKM3
    Wait for some other views

  • How to release the transport request

    Some one please help me here on better understanding on how transport
    are maintained and what steps should be taken before releasing it.
    I know we can see the list in se so that will not be the answer of my
    question need proper explanation on that please I will be highly obliged.
    thank you
    Bushan

    Hi
    Initially when a config request is raised...the settings are saved under a Request number. Every request is associated with a task under it.
    Release the task first (select the task and press F9)and then release the request(select the request and press F9). The objects will be no longer locked then and are free to be moved.
    Be careful while releasing the task. See the tables effected(if you expand task u can see). If you feel some unconnected table is included better a careful consideration be given while moving the request.
    When you release the task...the system may prompt you to enter text..that is nothing but the identification/explanation of your activity. You can record the same.
    Hope im clear
    Regards
    A
    Message was edited by:
            A.Aravind

  • How to release the prompt and how to stop JVM afterwords

    There are 2 related questions here:
    (1st) I have a Java class that I'd like to start and release the command prompt. In Linux, I usually start it this way:
    > java MyClass &
    But in Windows I can't do that, it always holds the command prompt open. If I try this way:
    > javaw MyClass
    it works, but if I call it from inside a batch file, it opens a command prompt (then I can close the command prompt and it remains in memory). But I'd like it not to open any command prompt. Does anyone know a way?
    (2nd) I'd like to start the class above like we do for some services... I thought of doing somethind like this:
    > java MyClass -start
    This, after solving the (1st) question, looks easy. The problem is: how to implement this class in order to be able to call
    > java MyClass -stop
    to stop it, finishing its JVM? How will this class be able to detect an instance of itself in memory and stop it??? Is there something simpler than using sockets for that purpose?
    Thanks for your help, friends!

    Well, the first is easy - instead of starting with java.exe, use javaw.exe. No more icky command prompt. ;-)
    The second one is trickier. If you really want to go that route, I'd suggest looking at the Tomcat bootstrap code - it listens on a specific port for program handling commands.

  • How to release the capturing device

    Dear helper
    I have developed an applet for video conference. I stored it in tomcat server. The client browsed a parant window and click the button, javascript window.open() will open another child window for the applet. In the first time, the applet was working normal. While I closed the child window and clicked the button again, the child window could not init the applet. I suspected the capturing device was not been released. As I closed the parant window and re-open it and then click the button, the applet worked properly in the child window.
    Would you please let me know how to relesae the device while i close the child window without close the parant window. I checked the applet code, the disposal code had be added.
    Thank you for your advise in advance.

    Hi Indu,
    Have you already thought of moving such "outsorted" devices to a special stock? Alternatively you may choose to allocate a special (user-) status(for example, BLOCKED)  to the device/equipment. This also will also prevent a further usage of this device.
    Kind regards,
    Fritz

  • How to release the IDOC based on the count

    Hi IDOC gurus,
    How to release IDOC's based on the count?
    Actually, my requirement is I have to release the IDOC's of count 50 for every 5 or 10 minutes. I tried by scheduling the background job for the program RSEOUT00, but unfortunately there was no option of selecting the IDOC's based on count for the given message type except IDOC range i.e FROM and TO select options in the selection screen.
    Are there any other alternative where I can release the IDOC's based on count for every periodic 5 or 10minutes?
    Also, can I know how can we configure the multiple QUEUES for the IDOC's?
    I highly appreciate who can help regarding this and points are awarded.
    Thanks,
    Sreevani.

    Hi Ferry,
    I tried with that option. Maximum number of IDocs parameter is the package size not the count of IDOC's.
    I have 100 IDOC's with status 30 and all IDOC's got released eventhough the value of  "Maximum number of IDocs" parameter is 50. I checked in the code it is an package size i.e., maxm IDOCs that it can be transferred from RFC outbound queue to a port at time and not maximum number that can be processed for the program execution.
    Thanks,
    Sreevani.

Maybe you are looking for