How to relink Oracle binaries to new OS group assinged to oracle account

Hello,
Can someone tell us the steps how to relink oracle binaries to new OS group assinged to oracle account.
Regards,
Nikhil Jain

always post your questions with oracle version and operating name and version.
refer the link:-
http://oracle.erkansaka.org/2008/04/how-to-change-oracle-dba-group-in-unix.html
http://dbaforums.org/oracle/index.php?showtopic=7279
Thread: "change the DBA group" in a windows environment
"change the DBA group" in a windows environment

Similar Messages

  • Define new tolerance group for G/L accounts

    Hi,
    Where do define new tolerance group for G/L accounts?
    Thank in advance.
    Swetha

    Hi Swatha,
    Debit Account
    Maximum Revenue Difference on Clearing
         Clearing differences in your favour are permitted up to the amount specified here. The amount always refers to the local currency. Differences up to amount specified are automatically posted by the system as increasing profits. To do this, the system creates new line items.
         In addition to the amount, enter a percentage rate in the Percentage field. The lower of the two limits applies. If you only want to use absolute amounts or percentage rates, you have to enter maximum value in other fields. Ensure that you define these limits for your G/L accounts and your employees. The lower of the two limits applies.
    Credit Account
    Maximum Expense Difference on Clearing
         Differences to your disadvantage are permitted up to the amount specified here. The amount always refers to the local currency. Differences up to amount are automatically posted by the system as reducing profits.
         In addition to the amount, enter a percentage rate in the field
         Percentage. The lower limit applies. If you only want to use absol amounts or percentage specifications, you have to enter maximum value in other fields.  Ensure that you define these limits for your G/L account and your employees. The lower value applies.
    May be this information is useful to you
    Edited by: surya naveen on Jul 28, 2008 2:11 PM

  • How do I set up a new sub group email on the macbook ?

    I will begin by freely admitting that I am not computer literate...I switch on and use. The present email has been in existence for so long I can't remember how it was set up, think the laptop did it by itself.
    The problem...
    I want to set up a sub group email address for the small club that I am treasurer for and then use this so members can pay subscriptions via paypal.
    I followed the yahoo instructions to set a new email address and this was OK, the address is shown at the foot of the my account page on yahoo as the only sub group. ISP is BTinternet.com so that uses yahoo.
    Easy so far.
    Remember opening sentence !
    How do I set up my existing email page to show when a message has been received on the new sub group email. I use macmail on a macbook , not PC outlookexpress. In other words, how do I open/access/show this new email on the macbook ? I don't want to compromise the existing email set-up, just have a 'secondary' or 'sub group' account.
    Thanks
    Brian

    Yes, you just setup another account in Mail, on the Second page where it has Description you need another Name in there than the Other one has.
    http://email.about.com/od/macosxmailtips/qt/access_aol.htm
    Message was edited by: BDAqua

  • How to set up iTunes on new Mac if already have iTunes account on old PC

    I got a new iMac and started an iTunes account and hooked up my iPhone.  Now it says that I can only use my iPhone on 1 computer and I would need to erase my current iPhone and sync it with the empty new ITunes account. How do I make my new computer the one that I want to use?  My old IBM doesn't work anymore.  I don't want to lose all of my things.  Thank you.

    See Recover your iTunes library from your iPod or iOS device.
    tt2

  • How to relink clips THROUGH the new Project Library??

    I updated everything to FCPX 10.1.1.
    Some clips became unlinked.  I go to link them ... and am stopped dead by the NEW Library Icon (with all it's internal folders no longer seemingly accessible).  I know the file is in there - if I do a search in Finder for the missing media, it takes me right to where it is.
    When I do a relink, stopped dead in my tracks by the new format.
    How do I access the folders hidden in the new Project Library to relink my clips with their original media?

    Ben Low wrote:
    ... when I go to 'locate' or 'search' for the missing file FCPX gets stuck at the door to the Project Library ...
    you miss the concept of Libs:
    Libraries are no 'real world' folders, just a 'register' where is what .. in best-of-all-worlds, all data (audio, video, stills, projects ...) are on the same drive - but the concept of Libs allows data spread all across your network But handled as 'one', e.g to finally-save Projects, outsource old data etc ...
    A Lib acts like a (super-)folder, but isn't. Simple example: a 10GB lib could fit on a 2GB drive! .. if data is spread on some other drives. But Finder says 'here', due to use of hard- or sym-links. ....
    ... I read in my searches that one doesn't have to have one's media stored in the Library, but I haven't found a protocol yet for saving media elsewhere.
    It's always in some LIb, but not physically... s.above ...
    ..  One thing I can't figure out:  Folders.  I love folders.  I use them all the time to organize.
    obsolete,
    get familiar with the concept of tags/keywords/smartlists.
    example:
    a clip is tagged x-mas, grandma, 2002, funny scene .. one clip, one storage location, many ways to find it.
    now, your old drawer/folder system: the scene with grandma wearing a funny hat ... do I have to dig in folder 'videos2002' or 'videos2003'? sub-folder xmas or birthday? or is it n my 'out-takes drive'.. but under what name? your one clip can only be in one drawer... but should be found under several keywords... sooo?
    Folders = old school
    tags = much more convenient.
    (plus: you can use tags very similiar as your old folders... but a computer is much faster in dig'n-search than you, manually
    concerning re-linking:
    I once had the effect, a 'lost' drive had to be re-mounted:
    the red-icon-of-terror (cam missing), relink doesn't came up with a suggestion; clicked on import from camera, clicked to my cam-archive on some drive - and WHILE doing so FCPX instantly found the old connection (no re-import nor re-linking neccessary)..
    That drive was unintended un-plugged while using FCPX ..... never happened again.

  • How to display different text for labels in Group Above Report Oracle Repor

    Hello,
    Is there a way to change the text that is displayed in Labels in a Group Above Report? For example, I have a Group Above report with my columns of data and above the columns I have my column labels, but I would like to be able to display various text, i.e. different labels based on condition. In other words, Column1 label could say Column 1 or This is Column1, based on a condition. This is Oracle Report Builder 10.1.2.0.2.
    Thank you.

    968277 wrote:
    I'm thinking it is possible with a Format Trigger, but I've only ever returned (TRUE) or (FALSE). I am very new to Oracle Reports Builder. Thanks.Hi,
    Yes it's possible. and your are in the right place. use this true and false. For example
    /*true means display, false means don't display */
    if your_criteria_or_condition is ok then
    return (TRUE);
    else
    return (FALSE);
    end if;create as many label as your need and control with the code..
    Hope this works..
    Hamid
    Mark correct/helpful to help others to get right answer(s).*

  • New Resource Group Creation in Oracle-RAc

    Dear All,
    I am new to solaris, could you please any provide best practice or step-step procedure document for the below requirement.
    Requirement.
    1) we have a sun cluster configured with orace-rac already one active/active oracle resource is configured and running.
    2) I have a 100GB shared disk assigned to this cluster node.
    need to create metaset and soft partition using this 100GB. and the same need to be configured in rac-cluster with new resourcegroup.
    Its bit urgert:) thanks in advance

    Using webutil you can. As in documentation APIs function names are still identical as they were in d2kwutil. Just little change like CLIENT_WIN_API_ENVIRONMENT......
    Check the following webutil functions.
    http://www.oracle.com/webapps/online-help/forms/10g/state?navSetId=_&navId=3&vtTopicFile=web_util/functions.htm&vtTopicId=
    -Ammad

  • How do I set up my new iphone 5s with the adobe account that I use on my iPad?

    I have been successfully using my iPad adobe reader account for years and now want to also use it with
    my iPhone.  Can I do that or must I set up a separate adobe account?

    Transfer content from an iPhone, iPad, or iPod touch to a new device - Apple Support

  • HOW DO I MAKE A FOLder FOR DIFFERENT GROUPS IN MY EMAIL ACCOUNTS

    as above and how do i make the letter bigger for the email coming in without having to click on them

    Perhaps first you could get a grip on the caps lock key. (Man that is hard to read)
    Right click a folder and select new folder
    This add-on will probably help with display fonts.
    https://addons.mozilla.org/en-us/thunderbird/addon/theme-font-size-changer/
    Instructions to install http://chrisramsden.vfast.co.uk/3_How_to_install_Add-ons_in_Thunderbird.html

  • How to handle goup sub total for each group in oracle query ?

    hi,
    i want to handle one complex thing in oracle query.
    i have a grouping in my oracle query.
    i want to do sub total for each group in query and after that i want to subtract one group sub total from previous group subtotal ?
    so how can i handle this in oracle query ?
    any help is greatly appreciated.
    thanks.

    Hello
    Interesting requirement.
    I wonder why are you not using these calculation during the display time. If it is acceptable then you can try using the custom formula with the running total combination in crystral report to achieve to get the required results.
    Best regards
    Ali Hadi

  • How to relink Oracle Binaries on Windows platform

    Hi Gurus,
    How to relink Oracle Binaries on Windows platform?
    Database version - 11.1.0.7
    Application version - 12.1.3
    Thanks,
    Khan

    Hi Khan,
    Running AD Relink
    Run AD Relink as follows.
    1. Set the environment.
    You must set the environment to indicate the location of the configuration
    parameters that define your system. This task is common to many AD utilities. See
    Setting the Environment in Chapter 1.
    2. Relink files.
    Run AD Relink with the following command:
    UNIX:
    S adrelink.sh force=n "ad <executable name>"
    Windows:
    C:\> sh adrelink.sh force=n "ad <executable name>"
    Additional Information: See Relinking AD Executables in Oracle
    Applications Maintenance Procedures for complete instructions for
    running this utility with the various command line arguments.Taken from R12 maintenance utilites documentation PDF.
    Thanks
    Edited by: EBSDBA on Sep 14, 2011 1:14 PM

  • Relinking Oracle binaries and multiple Oracle Homes

    Hello,
    My question is related to relinking Oracle binaries in the following scenario:
    As part of larger migration project we are moving all the databases from one server to another. Both on old and on new server the OS is the same: HP-UX 11.23i. There are 5 databases on the source server, each with it's own Oracle Home (and Oracle binaries). All Oracle binaries for all the databases are version 10.2.0.3.
    On the new server we have some of the migrated databases already in production. Now our DBA wants to move another database and, because for each database binaries are moved also from source to destination server, he has to relink the binaries on target server. Is it required to stop all the databases on the target server to perform the relink for this one DB, even if they all have separate Oracle Homes (binaries)?
    Thanks for your answers
    Maciej

    883072 wrote:
    Hello,
    My question is related to relinking Oracle binaries in the following scenario:
    As part of larger migration project we are moving all the databases from one server to another. Both on old and on new server the OS is the same: HP-UX 11.23i. There are 5 databases on the source server, each with it's own Oracle Home (and Oracle binaries). All Oracle binaries for all the databases are version 10.2.0.3.
    On the new server we have some of the migrated databases already in production. Now our DBA wants to move another database and, because for each database binaries are moved also from source to destination server, he has to relink the binaries on target server. Is it required to stop all the databases on the target server to perform the relink for this one DB, even if they all have separate Oracle Homes (binaries)?
    NO!

  • How can we clone the Oracle database in new Oracle Home

    Hi,
    I would like to clone oracle database into new oracle home. How can we set it using OEM.
    I am using 10g grid control. Target db is on solaris
    Thanks
    Naveen

    after logging into target database, under maintenance tab, data movement header; ther is "clone database" option. When you click on it; you'll see :
    Clone Database uses RMAN to duplicate a database from:
    -- An open database in ARCHIVELOG mode, or
    -- An open database in NOARCHIVELOG mode (restart required), or
    -- A saved working directory from previous cloning
    Clone Database performs the following operations:
    -- Backup each database file and store it in a working directory
    -- Transfer each backup file from source to destination host
    -- Restore each backup file to existing destination Oracle Home
    -- Recover the cloned database with saved archived log files
    -- Open the cloned database with resetlogs
    It seems to be for cloning to a different host, but i guess you can chose the same host for source and destination. (I've never used cloning on em by the way :))
    But firstly, you should create a new oracle home, you can simply copy your oracle home with a new name (cp -R /oracle/app/oracle/product/10.2.0 /oracle/app/oracle/product/10.2.0.new) or make a new installation.
    I suggest you to do this cloning with CLI. You should take a full backup with RMAN, copy the oracle home, create a new initNEWSID.ora file and nomount the database, restore (or simply copy) controlfiles, restore database (with set newname commands), recover database, open resetlogs.

  • Build of oracle binaries

    Hello
    We have multiple oracle home bin in our landscape.
    When upgrade of build a new SID, we need to go over the orainst , install of patch and opatchs.
    this is time consuming. we try to copy the binaries from one SID to the new SID, but fail to run oracle, somewhere in the binaries, oracle link save the SID name...
    how can we build a 'golden image' of the oracle binaries and the adopt it to the new SID.
    TNX
    Erez

    Hi,
    You are right that the inventory will be wrong but Oracle will oracle without problem
    sure you cannot install patches after that. you still need to recopy them form clean installation and relibnk again.
    relink all will change hardcoded paths in libraries..
    if you want to be clean 100% then installing the software is the better solution.
    Thanks

  • Problems opening existing Oracle 9i in new 11g environment

    Hi everybody,
    Have I got a challenge for you! Just to be clear, I'm not an Oracle specialist (or just call me an Oracle-noob).
    Challenge: Open up an existing Oracle 9i database in a new Oracle 11g environment.
    End result: Be able to connect to a running Oracle database with 'SSMA for Oracle' to convert it to a SQL database.
    Starting point:
    - Received from customer: DBF, CTL and LOG files from an existing Oracle environment.
    - Since I cannot download Oracle 9i environment, I chose to install the 11g environment and hope for a proper backwards compatibility.
    How far I got:
    - Installed 11g environment
    - Configured a database pointing to the DBF files
    ~ Change init.ora to use the CTL files
    ~ Create spfile from init.ora
    ~ Startup database mount and rename database and datafiles using sqlplus (connecting with "sys as sysdba")
    Issues:
    Now I can startup the database, but it comes up with an *"ORA-00704: bootstrap process failure"* and recommends me to start it up with UPGRADE option. Starting it up with UPGRADE option works and I can browse through the database using the Toad tool (connecting "as sysdba"). But 'SSMA for Oracle' does not have an option to connect "as sysdba" and gives me an "ORA-39710: Only connect AS SYSDBA is allowed when OPEN in UPGRADE mode".
    Since the SSMA for Oracle client cannot log me into a database started with UPGRADE option I probably will have to fix the "ORA-00704: bootstrap process failure".
    I tried to avoid the upgrade-option by trying to upgrade the database to 11g. But utlu112i.sql and catalog.sql give me errors like "ORA-04023: Object SYS.STANDARD cannot be validated".
    Questions:
    - Do you think that what I'd like to achieve is possible at all?
    - Can I easily run a Oracle 9i database in a 11g environment or do I really have to upgrade?
    - Do you think this is the best way to get an existing Oracle database running in a new environment?
    - If yes: How do I solve the ORA-00704 error?
    If you need any more information, alert logs, .ora files or anything to give a proper answer, please ask and I will provide them.
    Thanks in advance!
    Regards,
    Dirco

    You can find the Oracle binaries here I think for 9i...
    http://edelivery.oracle.com
    No matter which direction you go here you are going to probably run into issues and setup needs that it would probably be better for you to hire a DBA to help out with. In the end it will probably cost you less in your time and effort.
    One "quick" method to upgrade a system (depending on your database size) and probably the simplest for you is to do an import and export. However, that will require that the client sends you and export of their database.
    You could then simply install the Oracle 11g database on your system and then import the previous database into the 11g instance. With 10g and on they recommend using a product called DataPump, but the import and export utilities are still available for use and I would stick with them for this.
    The trick about the import and export is that there are things that you will probably need setup within the 11g instance that mimic the 9i instance to have the import smoothly. Objects get created in areas called tablespaces which are logical abstration of the storage on the system. You will need tablespaces created that mirror the tablespaces on the 9i instance. So for a basic outline.
    1) Get client to create export of 9i instance.
    2) Get client to provide a list of tablespaces on the 9i instance and the size of those tablespaces.
    3) Install 11g on your new machine....in the process allow it to create a database (this is an option).
    4) Create tablespaces that mirror the 9i instance in naming and size on the 11g instance
    5) Do full import into the 11g instance of the 9i dump.
    I still suggest hiring a DBA for a few hours to make life easier on yourself and get the job done quickly and correctly.
    Regards
    Tim

Maybe you are looking for