How to relocate a Data Centre

Dear Netpro gurus,
I have been tasked with relocation of the Data Centre at work. does anyone out there who has any good tips / articles on how to do a successful Data Centre re-location?
Cheers,
Hunt

Questions thay i would ask if i get something similar...
- how much is the bearable downtime
- Does the network topology gives flexibility to use new ip subnets so that i may prepare some functionality at destination site before relocation.
- do i have the complete design document of existing DC physical connectivity
- Have i already been provided with the internet/intranet links at new site
- do i have planned for the power, space and cooling requirements for my infra and have i done the dite survey to know if that has been provisioned
- have the resources from each stakeholder been identified, engaged and scheduled
- do i have the checklist for all the network and service readiness tests to be done after thr relocation...
Sent from Cisco Technical Support Android App

Similar Messages

How to access a Network Share between two servers in same data centre

I have two dedicated servers (both Windows 2012 Server) hosted in a data centre somewhere. I want to share a folder on one server with the other server, but it's obviously not as straight forward as one might think. My servers are called "Maximus"
and "Apprentice".
On Maximus I shared a folder by right clicking on it and choosing "Share with... / Specific People", I then typed in the name of a local user account which also exists on Apprentice with the same name and password. (so each server has a local
user account with the same name and password).
So then on Apprentice, I was hoping I could access the share (while being logged in as this user with whom the folder was shared) by simply typing "\\ipaddress\sharename" into the address bar in file explorer. Unfortunately it comes
back with "Windows can not access [ip address]".
Now, I do have a website setup on the IP address for Maximus. This is actually the reason I want to create this share. I need the second server for load balancing and need to share IIS config as well as the website itself. (So I will need
two shares eventually, but for now I'm just trying to get one to work). I don't know if the fact that the ip address is pointing to the website is causing me problems here or if it's something else.
Are there any network gurus out there who can tell me what the issue is and how to resolve it?

I can ping both servers in either direction, but I believe I may have found the problem. Apparently my host is blocking port 445 which Windows wants to use to connect to the share and they will not unblock it.
Is there a way to connect to the share through a different port?
To my knowledge, you cannot change the port. However, you can try disabling your security software for testing. If this fixes the problem then you need to adjust your security software configuration so that traffic on this port is not blocked or filtered.
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

Moving Data Centre

Due to a planned closure of a data centre we are having to relocate one of our Ironport C370 Servers. This is one of two servers within a cluster. The second server is within a different data centre and therefore not affected. The move will obviously require new IP addresses. Does anyone have a planned procedure or advice on how to move the server without causing any outage?
I am also concerned about getting a poor Senderbase score on the new IP address.
Any advice would be greatly appreciated. Thank you.

Hey Jonathan,
Is your cluster set up using hostnames or IPs?
If its hostnames, you should be able to do the following (basically sort of like doing an upgrade):
clusterconfig disconnect machinename
Move it to new data center
Change IP's
Update Firewalls/DNS A records
Flush DNS caches on your other ESA boxes
custerconfig reconnect
If you have the cluster configured using IPs you may have to remove the box from the cluster and then re-add it...
Hope that helps,
Ken

How to relocate table in new tablespace in Oracle 8i

Hi all
I would like to know how to relocate table from one tablespace to another tablespace in Oracle 8i. Currently, I create new table without data in new tablespace and then load data from old table in old tablespace. However, I think it is not efficient at all. Could anyone kindly advise any method to proceed it
Thanks

Nick has pointed out the best way to relocate a table. With the alter table move command you do not have to worry about FK or any other kind of constraints, table triggers, or grants. They all remain in place. You just need to rebuild the indexes as Nick pointed out.
There were some restrictions on the types of tables that could be moved with alter table move when the command first was introduced. I think LOB columns were unsupported at first. The old exp/imp had to be used for those cases.
HTH -- Mark D Powell --

How to Add the cost centre in the KSBB report

Hi Experts,
How can we add cost centre in KSBB report. Is it possible to add? if yes could any one guide me how to add the cost centre in KSBB report?
waiting for your replies,
Regards

Hi,
I see only three possible explanations:
a) no data on this cost centre
b) authorizations
c) 'hard-coded' filter in the relevant report (only if it's user-developed report)
Regards,
Eli

SQL Server multiple data centres - Synchronization

Hello,
I am new to MSSQL. We have a web application that used MSSQL 2012 as backend. We now plan to have the same application hosted in another data centre. We are able to provide the geo-redundancy/HA for the web application.
But we also need to make sure that our SQL databases are always in SYNC. The web application in primary data centre is always going to serve all requests. The backup application will only be online if the primary data centre server is down or in maintenance
mode (once every two weeks).
How can we achieve the SQL replication (both ways) over the WAN making sure that all data is up-to date. We have users constantly updating information so data is written frequently to the DB (every 5-10 minutes on average).
Thanks
SinghP80

Take a look at MERGE replication.
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

How to download output data into Excel with all Column Headings

Hi Experts,
Please tell me How to download output data of ALV Grid into Excel file with all Column Headings and I want to do this using coding,
please send me if any solution is available.
Thanks & Regards,
Yogesh

VERSION CONTROL (Most recent on top):                                *
DATE(mm.dd.yyyy)    AUTHOR                                         *
06.25.2007         Pattan Naveen                                   *
Hi yogesh,,
Go through this in this u find ur solution.
report ZTEst_programe no standard page heading
                           line-size 100
                           line-count 50(5)
                           message-id zz.
*--alv type declaration
type-pools: slis.
*--Tables:
tables: anla,
        anlz,
        anlh,
        anlb,
        anlc.
data: v_pos type i.
data: v_ndjar type i.
data: v_ndper type i,
      v_ndperndabp type i,
      v_ndjarndabp1 type i,
      v_ndjarndabp type i,
      value type i,
date(10) type c value '2006.12.04'.
data: c_0000(4) type c value '0000'.
data: begin of it_final occurs 0,
         anlkl(8),
         bukrs(4),
         anln1 like anla-anln1,
         anln2 like anla-anln2,
         txt50 like anla-txt50,
         txa50 like anla-txa50,
         anlhtxt like anlh-anlhtxt,
         sernr like anla-sernr,
         invnr like anla-invnr,
         menge like anla-menge,
         meins like anla-meins,
         inken like anla-inken,
           ivdat like anla-ivdat,
         aktiv like anla-aktiv,
         gsber like anlz-gsber,
         kostl like anlz-kostl,
         kostlv like anlz-kostlv,
         werks like anlz-werks,
         stort like anlz-stort,
          raumn like anlz-raumn,
          txjcd like anlz-txjcd,
         ord41 like anla-ord41,
         ord44 like anla-ord44,
         gdlgrp like anla-gdlgrp,
         anlue like anla-anlue,
         lifnr like anla-lifnr,
         typbz like anla-typbz,
         aibn1 like anla-aibn1,
      aibn2 like anla-aibn2,
        aibdt like anla-aibdt,
         posnr like anla-posnr,
        vmgli like anla-vmgli,
        invzu like anla-invzu,
        ernam like anla-ernam,
        erdat like anla-erdat,
         afabe like anlb-afabe,
        afasl like anlb-afasl,
         ndjar like anlb-ndjar,
         ndper like anlb-ndper,
        afabg like anlb-afabg,
        ndabj like anlc-ndabj,
        ndabp like anlc-ndabp,
        andsj like anlc-andsj,
         andsp like anlc-andsp,
        safbg like anlb-safbg,
         umjar like anlb-umjar,
       inbda like anlb-inbda,
       kansw like anlc-kansw,
       knafa like anlc-knafa,
        kaafa like anlc-kaafa,
                 deakt like anla-deakt,
kanza like anlc-kanza,
kaufw like anlc-kaufw,
kinvz like anlc-kinvz,
ksafa like anlc-ksafa,
kmafa like anlc-kmafa,
end of it_final.
data: begin of it_final_as91 occurs 0,
         anlkl(8),
         bukrs(4),
         anln1 like anla-anln1,
         anln2 like anla-anln2,
         txt50 like anla-txt50,
         txa50 like anla-txa50,
         anlhtxt like anlh-anlhtxt,
         sernr like anla-sernr,
         invnr like anla-invnr,
         menge like anla-menge,
         meins like anla-meins,
         inken like anla-inken,
         ivdat like anla-ivdat,
         aktiv like anla-aktiv,
         gsber like anlz-gsber,
         kostl like anlz-kostl,
         kostlv like anlz-kostlv,
         werks like anlz-werks,
         stort like anlz-stort,
         raumn like anlz-raumn,
         txjcd like anlz-txjcd,
         ord41 like anla-ord41,
         ord44 like anla-ord44,
         gdlgrp like anla-gdlgrp,
         anlue like anla-anlue,
         lifnr(10),
         typbz(15),
         aibn1 like anla-aibn1,
         aibn2 like anla-aibn2,
        aibdt like anla-aibdt,
         posnr like anla-posnr,
        vmgli like anla-vmgli,
        invzu like anla-invzu,
        ernam like anla-ernam,
        erdat like anla-erdat,
end of it_final_as91.
data: it_download_as91 like it_final_as91 occurs 0
                                          with header line."#EC NEEDED
data: begin of it_final_as92 occurs 0,
         anlkl(8),
         bukrs(4),
         anln1 like anla-anln1,
         anln2 like anla-anln2,
         deakt like anla-deakt,
         ernam like anla-ernam,
         erdat like anla-erdat,
         afabe like anlb-afabe,
         afasl like anlb-afasl,
         ndjar like anlb-ndjar,
         ndper like anlb-ndper,
          afabg like date,
         ndabj(3) type c,
         ndabp(3) type c,
        kansw like anlc-kansw,
       knafa like anlc-knafa,
        kaafa like anlc-kaafa,
kanza like anlc-kanza,
kaufw like anlc-kaufw,
kinvz like anlc-kinvz,
ksafa like anlc-ksafa,
kmafa like anlc-kmafa,
end of it_final_as92.
data: it_download_as92 like it_final_as92 occurs 0
                                          with header line."#EC NEEDED
data: begin of it_values occurs 0,
         anlkl(8),
         bukrs(4),
         anln1 like anla-anln1,
         anln2 like anla-anln2,
         deakt like anla-deakt,
         afabe like anlb-afabe,
        afasl like anlb-afasl,
         ndjar like anlb-ndjar,
         ndper like anlb-ndper,
         afabg like date,
         ndabj(3) type c,
         ndabp(3) type c,
         afabe_02 like anlb-afabe,
         afasl_02 like anlb-afasl,
         ndjar_02 like anlb-ndjar,
         ndper_02 like anlb-ndper,
          afabg_02 like date,
         ndabj_02 like anlc-ndabj,
         ndabp_02 like anlc-ndabp,
        kansw01 like anlc-kansw,
       knafa01 like anlc-knafa,
        kaafa01 like anlc-kaafa,
          kansw02 like anlc-kansw,
       knafa02 like anlc-knafa,
        kaafa02 like anlc-kaafa,
          kansw03 like anlc-kansw,
       knafa03 like anlc-knafa,
        kaafa03 like anlc-kaafa,
          kansw04 like anlc-kansw,
       knafa04 like anlc-knafa,
        kaafa04 like anlc-kaafa,
          kansw05 like anlc-kansw,
       knafa05 like anlc-knafa,
        kaafa05 like anlc-kaafa,
       kansw06 like anlc-kansw,
       knafa06 like anlc-knafa,
       kaafa06 like anlc-kaafa,
       kansw07 like anlc-kansw,
       knafa07 like anlc-knafa,
       kaafa07 like anlc-kaafa,
       kansw08 like anlc-kansw,
       knafa08 like anlc-knafa,
       kaafa08 like anlc-kaafa,
       kansw09 like anlc-kansw,
       knafa09 like anlc-knafa,
       kaafa09 like anlc-kaafa,
kanza01 like anlc-kanza,
kaufw01 like anlc-kaufw,
kinvz01 like anlc-kinvz,
ksafa01 like anlc-ksafa,
kmafa01 like anlc-kmafa,
end of it_values.
data: it_values_xls like it_values occurs 0
                                   with header line."#EC NEEDED
data: begin of it_itab1 occurs 0,
       bukrs like anla-bukrs,
       anlkl like anla-anlkl,
       anln1 like anla-anln1,
         anln2 like anla-anln2,
       txt50 like anla-txt50,
       txa50 like anla-txa50,
       invnr like anla-invnr,
       ktogr like anla-ktogr,
       sernr like anla-sernr,
       menge like anla-menge,
       meins like anla-meins,
       ivdat like anla-ivdat,
       inken like anla-inken,
       aktiv like anla-aktiv,
       deakt like anla-deakt,
       zugdt like anla-zugdt,
       zujhr like anla-zujhr,
       zuper like anla-zuper,
       gdlgrp like anla-gdlgrp,
       anlue like anla-anlue,
       xafabch like anla-xafabch,
       aibn1 like anla-aibn1,
       aibn2 like anla-aibn2,
       aibdt like anla-aibdt,
       posnr like anla-posnr,
       ord41 like anla-ord41,
        ord44 like anla-ord44,
        vmgli like anla-vmgli,
         invzu like anla-invzu,
         typbz like anla-typbz,
         lifnr like anla-lifnr,
         ernam like anla-ernam,
         erdat like anla-erdat,
      end of it_itab1.
data: begin of it_itab2 occurs 0,
        bukrs like anlz-bukrs,
        anln1 like anlz-anln1,
         anln2 like anla-anln2,
        bdatu like anlz-bdatu,
        werks like anlz-werks,
        gsber like anlz-gsber,
        kostl like anlz-kostl,
        kostlv like anlz-kostlv,
        stort like anlz-stort,
        raumn like anlz-raumn,
        txjcd like anlz-txjcd,
        ipsnr like anlz-ipsnr,
      end of it_itab2.
data: begin of it_itab3 occurs 0,
        bukrs like anlh-bukrs,
        anln1 like anlh-anln1,
        anlhtxt like anlh-anlhtxt,
       end of it_itab3.
data: begin of it_itab4 occurs 0,
        bukrs like anlb-bukrs,
        anln1 like anlb-anln1,
         anln2 like anla-anln2,
        afabe like anlb-afabe,
        bdatu like anlb-bdatu,
        afasl like anlb-afasl,
        ndjar like anlb-ndjar,
        ndper like anlb-ndper,
        afabg like anlb-afabg,
        ndurj like anlb-ndurj,
        ndurp like anlb-ndurp,
        umjar like anlb-umjar,
        safbg like anlb-safbg,
        zinbg like anlb-zinbg,
        inbda like anlb-inbda,
        end of it_itab4.
data: begin of it_itab5 occurs 0,
       bukrs like anlc-bukrs,
       anln1 like anlc-anln1,
         anln2 like anla-anln2,
       gjahr like anlc-gjahr,
       afabe like anlc-afabe,
       zujhr like anlc-zujhr,
       zucod like anlc-zucod,
       ndabj like anlc-ndabj,
       ndabp like anlc-ndabp,
       kansw like anlc-kansw,
       knafa like anlc-knafa,
       kaafa like anlc-kaafa,
       ksafa like anlc-ksafa,
       andsj like anlc-andsj,
       andsp like anlc-andsp,
kanza like anlc-kanza,
kaufw like anlc-kaufw,
kinvz like anlc-kinvz,
kmafa like anlc-kmafa,
      end of it_itab5.
ALV DECLARATIONS
*--declarations for Xls sheet header field names
data: begin of it_head occurs 0,
column(70).
data: end of it_head.
data: begin of it_head1 occurs 0,
column(70).
data: end of it_head1.
*--type declarations for field catalog for basic report
data: it_fldcat_head type slis_t_fieldcat_alv,
      wa_fldcat_head type slis_fieldcat_alv."#EC NEEDED
data : w_field type slis_fieldcat_alv."#EC NEEDED
data: it_fldcat_head1 type slis_t_fieldcat_alv,
      wa_fldcat_head1 type slis_fieldcat_alv."#EC NEEDED
*--type declarations for layout design
data: wa_layout type slis_layout_alv.
*--type declarations for list header on grid
*data: top_of_page type slis_t_listheader.
*--declaration of variables
data : w_repid like sy-repid.
**selection-screen
select-options: s_bukrs for anla-bukrs,
                s_anln1 for anla-anln1.
select-options: s_deakt for anla-deakt,
                s_gjahr for anlc-gjahr obligatory,
                s_anlkl for anla-anlkl,
                s_date for anla-aktiv.
*selection-screen
selection-screen begin of block blk1 with frame title text-022.
selection-screen begin of line.
parameters : r1 radiobutton group g1 default 'X'.
selection-screen comment 20(50) text-020.
selection-screen end of line.
selection-screen begin of line.
parameters : r2 radiobutton group g1.
selection-screen comment 20(50) text-021.
selection-screen end of line.
selection-screen end of block blk1.
selection-screen begin of block blk2 with frame title text-023.
select-options: s_ernam for anla-ernam,
                   s_erdat for anla-erdat .
selection-screen end of block blk2.
*--INITIALIZATION
initialization.
w_repid = sy-repid.
at selection-screen.
if r1 = 'X'.
    perform selection_screen_validation.
endif.
if r2 = 'X'.
    perform selection_screen_validation.
endif.
*--START-OF-SELCTION
start-of-selection.
if r1 = 'X'.
    perform populate-data.
    perform fill_finaldata.
   perform comment_build using top_of_page.
    perform xls_output.
    perform download.
endif.
if r2 = 'X'.
    perform populate-data.
    perform fill_finaldata.
    perform fill_as92data.
    perform putdata_horizontal.
    perform xls_output_as92.
    perform download_as92.
endif.
*--END-OF-SELCTION
end-of-selection.
if r1 = 'X'.
    perform build_layout.
    perform build_fieldcatalog.
   perform top_of_page.
    perform list-display.
endif.
if r2 = 'X'.
    perform build_layout.
    perform build_fieldcatalog1.
    perform list-display1.
endif.
*&      Form SELECTION_SCREEN_VALIDATION
      text
--> p1        text
<-- p2        text
form selection_screen_validation.
*--validating originating company code
data: l_bukrs like anla-bukrs."#EC NEEDED
if not s_bukrs[] is initial.
    select single bukrs from anla
           into l_bukrs
           where bukrs in s_bukrs.
    if sy-subrc <> 0.
      message e000 with text-001 .
    endif.
endif.
*--validating originating main asset no.
data: l_anln1 like anla-anln1."#EC NEEDED
if not s_anln1[] is initial.
    select single anln1 from anla
           into l_anln1
           where anln1 in s_anln1.
    if sy-subrc <> 0.
      message e000 with text-002 .
    endif.
endif.
*--validating originating Deactivation date
data: l_deakt like anla-deakt."#EC NEEDED
if not s_deakt[] is initial.
    select single deakt from anla
           into l_deakt
           where deakt in s_deakt.
    if sy-subrc <> 0.
      message e000 with text-004 .
    endif.
endif.
*--validating originating asset class.
data: l_anlkl like anla-anlkl."#EC NEEDED
if not s_anlkl[] is initial.
    select single anlkl from anla
           into l_anlkl
           where anlkl in s_anlkl.
    if sy-subrc <> 0.
      message e000 with text-006 .
    endif.
endif.
*--validating originating Date
data: l_date like anla-aktiv."#EC NEEDED
if not s_date[] is initial.
    select single aktiv from anla
           into l_date
           where aktiv in s_date.
    if sy-subrc <> 0.
      message e000 with text-007 .
    endif.
endif.
*--validating originating Fiscal year which first acquisition was posted
data: l_gjahr like anlc-gjahr."#EC NEEDED
if not s_gjahr[] is initial.
    select single gjahr from anlc
           into l_gjahr
           where gjahr in s_gjahr.
    if sy-subrc <> 0.
      message e000 with text-008.
    endif.
endif.
data: l_ernam like anla-ernam."#EC NEEDED
if not s_ernam[] is initial.
    select single ernam from anla
           into l_ernam
           where ernam in s_ernam.
    if sy-subrc <> 0.
      message e000 with text-009.
    endif.
endif.
data: l_erdat like anla-erdat."#EC NEEDED
if not s_erdat[] is initial.
    select single erdat from anla
           into l_erdat
           where erdat in s_erdat.
    if sy-subrc <> 0.
      message e000 with text-010.
    endif.
endif.
endform.                    " SELECTION_SCREEN_VALIDATION
*&      Form POPULATE-DATA
      text
--> p1        text
<-- p2        text
form populate-data.
select bukrs
         anlkl
         anln1
         anln2
         txt50
         txa50
         invnr
         ktogr
         sernr
         menge
         meins
         ivdat
         inken
         aktiv
         deakt
         zugdt
         zujhr
         zuper
         gdlgrp
         anlue
         xafabch
         aibn1
         aibn2
         aibdt
         posnr
         ord41
         ord44
         vmgli
         invzu
         typbz
         lifnr
         ernam
         erdat
        from anla
            into table it_itab1
            where anlkl in s_anlkl and
                  anln1 in s_anln1 and
                  deakt in s_deakt and
                  bukrs in s_bukrs and
                  aktiv in s_date.
if sy-subrc ne 0.
    message e000 with 'Data does not exist'(094).
endif.
if not it_itab1[] is initial.
    select bukrs
           anln1
           anln2
           bdatu
           werks
           gsber
           kostl
           kostlv
           stort
           raumn
           txjcd
           ipsnr
           from anlz
           into table it_itab2
           for all entries in it_itab1
           where bukrs = it_itab1-bukrs and
                 anln1 = it_itab1-anln1 and
                anln2 = it_itab1-anln2.
                  anln2 = '0000'.
    if sy-subrc ne 0.
      message e000 with 'Data does not exist'(094).
    endif.
endif.
if not it_itab2[] is initial.
    select bukrs
           anln1
           anlhtxt
           from anlh
           into table it_itab3
    for all entries in it_itab2
    where bukrs = it_itab2-bukrs and
          anln1 = it_itab2-anln1.
    if sy-subrc ne 0.
      message e000 with 'Data does not exist'(094).
    endif.
endif.
if not it_itab1[] is initial.
    select bukrs
    anln1
    anln2
    afabe
    bdatu
    afasl
    ndjar
    ndper
    afabg
    ndurj
    ndurp
    umjar
    safbg
    zinbg
    inbda
    from anlb
    into table it_itab4
    for all entries in it_itab1
    where bukrs = it_itab1-bukrs and
          anln1 = it_itab1-anln1 and
         anln2 = it_itab1-anln2.
           anln2 = '0000'.
    if sy-subrc ne 0.
      message e000 with 'Data does not exist'(094).
    endif.
endif.
sort it_itab4 by bukrs anln1 anln2 afabe.
if not it_itab4[] is initial.
    select bukrs
          anln1
          anln2
         gjahr
        afabe
        zujhr
        zucod
         ndabj
         ndabp
         kansw
         knafa
         kaafa
         ksafa
         andsj
         andsp
         kanza
kaufw
kinvz
kmafa
         from anlc
         into table it_itab5
         for all entries in it_itab4
         where bukrs = it_itab4-bukrs and
            anln1 = it_itab4-anln1 and
           anln2 = it_itab4-anln2 and
            anln2 = '0000' and
            gjahr in s_gjahr.
    if sy-subrc ne 0.
      message e000 with 'Data does not exist'(094).
    endif.
endif.
sort it_itab5 by bukrs anln1 anln2 ndabj ndabp.
endform.                    " POPULATE-DATA
*&      Form FILL_FINALDATA
      text
--> p1        text
<-- p2        text
form fill_finaldata.
loop at it_itab5.
    loop at it_itab4 where bukrs = it_itab5-bukrs and
                        anln1 = it_itab5-anln1 and
                        anln2 = it_itab5-anln2 and
                        afabe = it_itab5-afabe.
      it_final-afabe = it_itab4-afabe.
      it_final-afasl = it_itab4-afasl.
      it_final-ndjar = it_itab4-ndjar.
      it_final-ndper = it_itab4-ndper.
      it_final-afabg = it_itab4-afabg.
      it_final-umjar = it_itab4-umjar.
      it_final-safbg = it_itab4-safbg.
      it_final-inbda = it_itab4-inbda.
      it_final-ndabj = it_itab5-ndabj.
      it_final-ndabp = it_itab5-ndabp.
      it_final-kansw = it_itab5-kansw.
      it_final-knafa = it_itab5-knafa.
      it_final-kaafa = it_itab5-kaafa.
      it_final-andsj = it_itab5-andsj.
      it_final-andsp = it_itab5-andsp.
      it_final-kanza = it_itab5-kanza.
      it_final-kaufw = it_itab5-kaufw.
      it_final-kinvz = it_itab5-kinvz.
      it_final-ksafa = it_itab5-ksafa.
      it_final-kmafa = it_itab5-kmafa.
      read table it_itab1 with key   bukrs = it_itab5-bukrs
                                  anln1 = it_itab5-anln1
                                  anln2 = it_itab5-anln2.
      if sy-subrc = 0.
        it_final-anlkl = it_itab1-anlkl.
        it_final-anln1 = it_itab1-anln1.
        it_final-anln2 = it_itab1-anln2.
        it_final-bukrs = it_itab1-bukrs.
        it_final-txt50 = it_itab1-txt50.
        it_final-txa50 = it_itab1-txa50.
        it_final-invnr = it_itab1-invnr.
        it_final-sernr = it_itab1-sernr.
        it_final-menge = it_itab1-menge.
        it_final-meins = it_itab1-meins.
        it_final-ivdat = it_itab1-ivdat.
        it_final-inken = it_itab1-inken.
        it_final-aktiv = it_itab1-aktiv.
        it_final-deakt = it_itab1-deakt.
        it_final-gdlgrp = it_itab1-gdlgrp.
        it_final-anlue = it_itab1-anlue.
        it_final-aibn1 = it_itab1-aibn1.
        it_final-aibn2 = it_itab1-aibn2.
        it_final-aibdt = it_itab1-aibdt.
        it_final-ord41 = it_itab1-ord41.
        it_final-ord44 = it_itab1-ord44.
        it_final-vmgli = it_itab1-vmgli.
        it_final-typbz = it_itab1-typbz.
        it_final-lifnr = it_itab1-lifnr.
        it_final-posnr = it_itab1-posnr.
        it_final-invzu = it_itab1-invzu.
      endif.
      read table it_itab2 with key   bukrs = it_itab5-bukrs
                                anln1 = it_itab5-anln1
                                anln2 = it_itab5-anln2.
      if sy-subrc = 0.
        it_final-werks = it_itab2-werks.
        it_final-gsber = it_itab2-gsber.
        it_final-kostl = it_itab2-kostl.
        it_final-kostlv = it_itab2-kostlv.
        it_final-stort = it_itab2-stort.
        it_final-raumn = it_itab2-raumn.
        it_final-txjcd = it_itab2-txjcd.
      endif.
      read table it_itab3 with key bukrs = it_itab5-bukrs
                                 anln1 = it_itab5-anln1.
      if sy-subrc = 0.
        it_final-anlhtxt = it_itab3-anlhtxt.
      endif.
      append it_final.
      clear it_final.
    endloop.
endloop.
loop at it_final.
    move-corresponding it_final to it_final_as91.
    append it_final_as91.
    clear it_final_as91.
endloop.
delete adjacent duplicates from it_final_as91 comparing anlkl bukrs
anln1 anln2.
it_download_as91[] = it_final_as91[].
endform.                    " FILL_FINALDATA
*&      Form BUILD_LAYOUT
      text
--> p1        text
<-- p2        text
form build_layout.
wa_layout-zebra = 'X'.
endform.                    " BUILD_LAYOUT
*&      Form BUILD_FIELDCATALOG
      text
--> p1        text
<-- p2        text
form build_fieldcatalog.
if it_fldcat_head is initial.
    v_pos = 0.
    v_pos = v_pos + 1.
    w_field-col_pos = v_pos.
    wa_fldcat_head-tabname = 'it_FINAL_AS91'.
    wa_fldcat_head-fieldname = 'ANLKL'.
    wa_fldcat_head-seltext_l = 'Asset Class'(093).
    append wa_fldcat_head to it_fldcat_head.
   V_POS = 0.
    v_pos = v_pos + 1.
    w_field-col_pos = v_pos.
    wa_fldcat_head-tabname = 'it_FINAL_AS91'.
    wa_fldcat_head-fieldname = 'BUKRS'.
    wa_fldcat_head-seltext_l = 'Company'(092).
    append wa_fldcat_head to it_fldcat_head.
   V_POS = 0.
    v_pos = v_pos + 1.
    w_field-col_pos = v_pos.
    wa_fldcat_head-tabname = 'it_FINAL_AS91'.
    wa_fldcat_head-fieldname = 'ANLN1'.
    wa_fldcat_head-seltext_l = 'Asset No'(091).
    append wa_fldcat_head to it_fldcat_head.
   V_POS = 0.
    v_pos = v_pos + 1.
    w_field-col_pos = v_pos.
    wa_fldcat_head-tabname = 'it_FINAL_AS91'.
    wa_fldcat_head-fieldname = 'ANLN2'.
    wa_fldcat_head-seltext_l = 'Asset Sub No'(090).
    append wa_fldcat_head to it_fldcat_head.
   V_POS = 0.
    v_pos = v_pos + 1.
    w_field-col_pos = v_pos.
    wa_fldcat_head-tabname = 'it_FINAL_AS91'.
    wa_fldcat_head-fieldname = 'TXT50'.
    wa_fldcat_head-seltext_l = 'Asset Des.'(089).
    append wa_fldcat_head to it_fldcat_head.
   V_POS = 0.
    v_pos = v_pos + 1.
    w_field-col_pos = v_pos.
    wa_fldcat_head-tabname = 'it_FINAL_AS91'.
    wa_fldcat_head-fieldname = 'TXA50'.
    wa_fldcat_head-seltext_l = 'Asset Des.'(088).
    append wa_fldcat_head to it_fldcat_head.
   V_POS = 0.
    v_pos = v_pos + 1.
    w_field-col_pos = v_pos.
    wa_fldcat_head-tabname = 'it_FINAL_AS91'.
    wa_fldcat_head-fieldname = 'ANLHTXT'.
    wa_fldcat_head-seltext_l = 'Asset main no txt'(087).
    append wa_fldcat_head to it_fldcat_head.
   V_POS = 0.
    v_pos = v_pos + 1.
    w_field-col_pos = v_pos.
    wa_fldcat_head-tabname = 'it_FINAL_AS91'.
    wa_fldcat_head-fieldname = 'SERNR'.
    wa_fldcat_head-seltext_l = 's.no/Expl no.'(086).
    append wa_fldcat_head to it_fldcat_head.
   V_POS = 0.
    v_pos = v_pos + 1.
    w_field-col_pos = v_pos.
    wa_fldcat_head-tabname = 'it_FINAL_AS91'.
    wa_fldcat_head-fieldname = 'INVNR'.
    wa_fldcat_head-seltext_l = 'Inv No'(085).
    append wa_fldcat_head to it_fldcat_head.
   V_POS = 0.
    v_pos = v_pos + 1.
    w_field-col_pos = v_pos.
    wa_fldcat_head-tabname = 'it_FINAL_AS91'.
    wa_fldcat_head-fieldname = 'MENGE'.
    wa_fldcat_head-seltext_l = 'Qtty'(084).
    append wa_fldcat_head to it_fldcat_head.
   V_POS = 0.
    v_pos = v_pos + 1.
    w_field-col_pos = v_pos.
    wa_fldcat_head-tabname = 'it_FINAL_AS91'.
    wa_fldcat_head-fieldname = 'MEINS'.
    wa_fldcat_head-seltext_l = 'Units'(083).
    append wa_fldcat_head to it_fldcat_head.
    v_pos = v_pos + 1.
    w_field-col_pos = v_pos.
    wa_fldcat_head-tabname = 'it_FINAL_AS91'.
    wa_fldcat_head-fieldname = 'INKEN'.
    wa_fldcat_head-seltext_l = 'Inv indi.'(082).
    append wa_fldcat_head to it_fldcat_head.
   V_POS = 0.
    v_pos = v_pos + 1.
    w_field-col_pos = v_pos.
    wa_fldcat_head-tabname = 'it_FINAL_AS91'.
    wa_fldcat_head-fieldname = 'IVDAT'.
    wa_fldcat_head-seltext_l = 'Last inv date'(081).
    append wa_fldcat_head to it_fldcat_head.
   V_POS = 0.
    v_pos = v_pos + 1.
    w_field-col_pos = v_pos.
    wa_fldcat_head-tabname = 'it_FINAL_AS91'.
    wa_fldcat_head-fieldname = 'AKTIV'.
    wa_fldcat_head-seltext_l = 'Asset Capital date'(080).
    append wa_fldcat_head to it_fldcat_head.
   V_POS = 0.
    v_pos = v_pos + 1.
    w_field-col_pos = v_pos.
    wa_fldcat_head-tabname = 'it_FINAL_AS91'.
    wa_fldcat_head-fieldname = 'GSBER'.
    wa_fldcat_head-seltext_l = 'Busin. Area'(079).
    append wa_fldcat_head to it_fldcat_head.
   V_POS = 0.
    v_pos = v_pos + 1.
    w_field-col_pos = v_pos.
    wa_fldcat_head-tabname = 'it_FINAL_AS91'.
    wa_fldcat_head-fieldname = 'KOSTL'.
    wa_fldcat_head-seltext_l = 'cost centre'(078).
    append wa_fldcat_head to it_fldcat_head.
   V_POS = 0.
    v_pos = v_pos + 1.
    w_field-col_pos = v_pos.
    wa_fldcat_head-tabname = 'it_FINAL_AS91'.
    wa_fldcat_head-fieldname = 'KOSTLV'.
    wa_fldcat_head-seltext_l = 'CC respon.for asset'(077).
    append wa_fldcat_head to it_fldcat_head.
   V_POS = 0.
    v_pos = v_pos + 1.
    w_field-col_pos = v_pos.
    wa_fldcat_head-tabname = 'it_FINAL_AS91'.
    wa_fldcat_head-fieldname = 'WERKS'.
    wa_fldcat_head-seltext_l = 'Plant'(076).
    append wa_fldcat_head to it_fldcat_head.
   V_POS = 0.
    v_pos = v_pos + 1.
    w_field-col_pos = v_pos.
    wa_fldcat_head-tabname = 'it_FINAL_AS91'.
    wa_fldcat_head-fieldname = 'STORT'.
    wa_fldcat_head-seltext_l = 'Asset location'(075).
    append wa_fldcat_head to it_fldcat_head.
   V_POS = 0.
    v_pos = v_pos + 1.
    w_field-col_pos = v_pos.
    wa_fldcat_head-tabname = 'it_FINAL_AS91'.
    wa_fldcat_head-fieldname = 'RAUMN'.
    wa_fldcat_head-seltext_l = 'Room'(074).
    append wa_fldcat_head to it_fldcat_head.
   V_POS = 0.
    v_pos = v_pos + 1.
    w_field-col_pos = v_pos.
    wa_fldcat_head-tabname = 'it_FINAL_AS91'.
    wa_fldcat_head-fieldname = 'TXJCD'.
    wa_fldcat_head-seltext_l = 'Tax. Jur.'(073).
    append wa_fldcat_head to it_fldcat_head.
   V_POS = 0.
    v_pos = v_pos + 1.
    w_field-col_pos = v_pos.
    wa_fldcat_head-tabname = 'it_FINAL_AS91'.
    wa_fldcat_head-fieldname = 'ORD41'.
    wa_fldcat_head-seltext_l = 'Evaluation Grp 1'(072).
    append wa_fldcat_head to it_fldcat_head.
   V_POS = 0.
    v_pos = v_pos + 1.
    w_field-col_pos = v_pos.
    wa_fldcat_head-tabname = 'it_FINAL_AS91'.
    wa_fldcat_head-fieldname = 'ORD44'.
    wa_fldcat_head-seltext_l = 'Evaluation Grp 4'(071).
    append wa_fldcat_head to it_fldcat_head.
   V_POS = 0.
    v_pos = v_pos + 1.
    w_field-col_pos = v_pos.
    wa_fldcat_head-tabname = 'it_FINAL_AS91'.
    wa_fldcat_head-fieldname = 'GDLGRP'.
    wa_fldcat_head-seltext_l = 'Evalu. group 5'(070).
    append wa_fldcat_head to it_fldcat_head.
   V_POS = 0.
    v_pos = v_pos + 1.
    w_field-col_pos = v_pos.
    wa_fldcat_head-tabname = 'it_FINAL_AS91'.
    wa_fldcat_head-fieldname = 'ANLUE'.
    wa_fldcat_head-seltext_l = 'Asset Super No'(069).
    append wa_fldcat_head to it_fldcat_head.
   V_POS = 0.
    v_pos = v_pos + 1.
    w_field-col_pos = v_pos.
    wa_fldcat_head-tabname = 'it_FINAL_AS91'.
    wa_fldcat_head-fieldname = 'LIFNR'.
    wa_fldcat_head-seltext_l = 'Vendor Acct. No.'(068).
    append wa_fldcat_head to it_fldcat_head.
   V_POS = 0.
    v_pos = v_pos + 1.
    w_field-col_pos = v_pos.
    wa_fldcat_head-tabname = 'it_FINAL_AS91'.
    wa_fldcat_head-fieldname = 'TYPBZ'.
    wa_fldcat_head-seltext_l = 'Reference no'(067).
    append wa_fldcat_head to it_fldcat_head.
   V_POS = 0.
    v_pos = v_pos + 1.
    w_field-col_pos = v_pos.
    wa_fldcat_head-tabname = 'it_FINAL_AS91'.
    wa_fldcat_head-fieldname = 'AIBN1'.
    wa_fldcat_head-seltext_l = 'Original Asset Trans.'(066).
    append wa_fldcat_head to it_fldcat_head.
   V_POS = 0.
    v_pos = v_pos + 1.
    w_field-col_pos = v_pos.
    wa_fldcat_head-tabname = 'it_FINAL_AS91'.
    wa_fldcat_head-fieldname = 'AIBN2'.
    wa_fldcat_head-seltext_l = 'Original Asset Trans.'(065).
    append wa_fldcat_head to it_fldcat_head.
   V_POS = 0.
    v_pos = v_pos + 1.
    w_field-col_pos = v_pos.
    wa_fldcat_head-tabname = 'it_FINAL_AS91'.
    wa_fldcat_head-fieldname = 'AIBDT'.
    wa_fldcat_head-seltext_l = 'Trans. Asset'(064).
    append wa_fldcat_head to it_fldcat_head.
   V_POS = 0.
    v_pos = v_pos + 1.
    w_field-col_pos = v_pos.
    wa_fldcat_head-tabname = 'it_FINAL_AS91'.
    wa_fldcat_head-fieldname = 'POSNR'.
    wa_fldcat_head-seltext_l = 'WBS Elt. Invt. Proj.'(063).
    append wa_fldcat_head to it_fldcat_head.
   V_POS = 0.
    v_pos = v_pos + 1.
    w_field-col_pos = v_pos.
    wa_fldcat_head-tabname = 'it_FINAL_AS91'.
    wa_fldcat_head-fieldname = 'VMGLI'.
    wa_fldcat_head-seltext_l = 'Property clas.key'(062).
    append wa_fldcat_head to it_fldcat_head.
   V_POS = 0.
    v_pos = v_pos + 1.
    w_field-col_pos = v_pos.
    wa_fldcat_head-tabname = 'it_FINAL_AS91'.
    wa_fldcat_head-fieldname = 'INVZU'.
    wa_fldcat_head-seltext_l = 'suppl.inv spec.'(061).
    append wa_fldcat_head to it_fldcat_head.
endif.
endform.                    " BUILD_FIELDCATALOG
*&      Form COMMENT_BUILD
      text
     -->P_TOP_OF_PAGE text
*form comment_build using top_of_page type slis_t_listheader.
data: ls_line type slis_listheader.
****Header
clear : ls_line.
ls_line-typ = 'H'.
LS_LINE-KEY: not used for this type
ls_line-info = 'ASSET MASTER DATA LIST'.
append ls_line to top_of_page.
****Selection
clear ls_line.
ls_line-typ = 'S'.
ls_line-key = 'Key 1'.
ls_line-info = 'Asset Records'.
append ls_line to top_of_page.
****Action
clear ls_line.
ls_line-typ = 'A'.
LS_LINE-KEY: not used for this type
ls_line-info = 'for AS91'.
append ls_line to top_of_page.
*endform. "comment_build
      FORM top_of_page                                              *
*form top_of_page.
call function 'REUSE_ALV_COMMENTARY_WRITE'
      exporting
           i_logo             = 'ENJOYSAP_LOGO'
           it_list_commentary = top_of_page.
*endform. "top_of_page
*&      Form LIST-DISPLAY
      text
--> p1        text
<-- p2        text
form list-display.
wa_layout-colwidth_optimize = 'X'.
call function 'REUSE_ALV_GRID_DISPLAY'
       exporting
            i_callback_program     = w_repid
           i_callback_top_of_page = 'TOP_OF_PAGE'
            is_layout              = wa_layout
            it_fieldcat            = it_fldcat_head
           i_background_id        = 'ALV_BACKGROUND'
       tables
            t_outtab               = it_final_as91
       exceptions
            program_error          = 1
            others                 = 2.
if sy-subrc <> 0.
write:/'No Top of Page'(098).
endif.
endform.                    " LIST-DISPLAY
*&      Form DOWNLOAD
      text
--> p1        text
<-- p2        text
form download.
perform setup_header.
call function 'DOWNLOAD'
       exporting
            filetype                = 'DAT'
       tables
            data_tab                = it_download_as91
            fieldnames              = it_head
       exceptions
            invalid_filesize        = 1
            invalid_table_width     = 2
            invalid_type            = 3
            no_batch                = 4
            unknown_error           = 5
            gui_refuse_filetransfer = 6
            customer_error          = 7
            others                  = 8.
if sy-subrc <> 0.
write:/'Error in file Type'(097).
endif.
endform.                    " DOWNLOAD
*&      Form setup_header
      text

SAP Data Centres: Data At Rest Encrypted?

http://help.sap.com/saphelp_byd1502/en/ktp/Products/96e54f70e7b2450895d71966b531edf7/Publishing/Guides/SecurityGuide.pdf
Hello everyone,
A quick one: I was having a look through the PDF at the above URL ('SAP Business ByDesign, SAP Cloud For Customer, and SAP Cloud For Travel Expense: Security Guide), and it struck me that I couldn't find a single reference to data at rest in their data centres being encrypted. There's lots of talk about transport security and IDSs, physical security etc. --- but I didn't spot anything about actual encryption of data at rest. Is anyone knowledgeable on this subject able to enlighten me? It seems like a no-brainer that they would do so, of course, but I don't like to assume anything and would like to know what their confidentiality, integrity, etc. measures are for this. Thanks!
Lewis

Hi,
My scenario is similar.
Let us assume User A who is not supposed to see particular BEXquery Connection in BI Launch Pad in SAP BO BI 4.0
This can be accomplished at
1) BI end by creating analysis Authorization for a BI/BEX query unless a SAP Single Sign on enabled.
Question A) Can't this be done without SAP Single Sign on enabled? if so what are the other options? from SAP BI end.
Question B) Can you please advice steps In CMC how this can be done?
Is it possible that user in BI Launch Pad not able to have option "Select a Bex Query as datasource" all together ?
if so,
Question C) Can you please advice steps In CMC how this can be done?
Thank you,
Venu

Replicate File Server from Europe to Singapore data centre

Hi we would like to store 1 tb of blob data in Azure.
We would like to upload the data in London and then have a read only copy of the data be replicated to ideally the Singapore azure data centre.
Is this possible.
thanks

Hi Jonnly,
Irrespective of whether you opt for Geo-redundant storage type OR Read-access geo-redundant storage type for your storage account, the secondary region is determined based on the primary region, and cannot be changed.
You may refer the following link to know the Primary region and their respective Secondary region:
http://msdn.microsoft.com/en-us/library/azure/dn727290.aspx
However, you can create two different storage account in London and Singapore separately and copy the data between two Storage accounts.
http://blogs.msdn.com/b/mast/archive/2014/06/28/how-to-copy-files-to-from-azure-storage.aspx
Regards,
Manu Rekhar

WAAS Mobile HA between 2 Data Centres

We have to deploy WAAS Mobile between 2 Data Centres, with remote user connecting to either DC across VPN & then connecting to a local WAAS Mobile server. We are trying to understand the best way to configure this from the available documentation on CCO.
We are a bit confused re the role of the WAAS Mobile Manager Server.
Is this similar to the role of Central Manager on normal WAAS, i.e configuration/management etc, or does it have any function in the selection of the server a client will connect to.
Regarding HA & Load balancing of the connections between the Data Centres, this is how we think we should deploy it!
Deploy a Server Farm at each DC & use the Latency based method of farm selection. This way the client should connect to the local server farm, based on which DC the VPN connects to?
Is this correct, has anyone deployed WAAS mobile in this way or have any advice?
Thanks
Colin

Fabricpath is L2; not related to the L3 technology you want to use; if VRF are in use you can just use VLANs which is described in your first scenario : "use 2 routers with VRF lite configuration in each DC, then dot1q on the trunk through the Fabric Path"

FabricPath & Layer-3 VPNs (VRF) between 2 Data Centres

Hi there,
I'm looking at deploying FabricPath for layer-2 extension between 2 Data Centres.
We also have the requirement for providing layer-3 services between the 2 DC, as in Layer-3 VPN (MPLS VPN).
The alternative technology was MPLS, with full blown Layer-3 VPN, and Layer-2 VPNs through AToM or VPLS.
My question is, how can we provide VRF support over FabricPath?? Can we use 2 routers with VRF lite configuration in each DC, then dot1q on the trunk through the Fabric Path? Or just VRF Lite on the layer-3 terminating routers, with a specific VLAN for interconnecting the different VRFs?
Thanks,

Fabricpath is L2; not related to the L3 technology you want to use; if VRF are in use you can just use VLANs which is described in your first scenario : "use 2 routers with VRF lite configuration in each DC, then dot1q on the trunk through the Fabric Path"

SoundTrak Crashed!! How I got my data back.

If you get the beachball during a record, by what could be the screen saver kicking in or the disk drive going to sleep (all of which should be disabled to start with), then you might get a file which shows size and a good time of creation, but it won't play or show a waveform. In fact even Audacity won't touch it. Here's how to recover the data. Hopefully you know your settings you were using, aka 48khz, 44.1 etc. For the sake of this post, I used 24bit 44.1khz AIFF sample rescue information. Bear with me.
First locate your bad file in the soundtrak pro recordings folder. Duplicate it. Note its size. Take the copy and get it to the desktop. Do not muck with the original.
Download the 0xED (thats the name) hex editing app. You can also have a dupe file of a working file from an earlier session. Your going to want to copy it as well and put it on your desktop. You'll need the header info from it.
Open your known good file wih 0xED. Highlight and copy from the beginning of that file address 0000000 thru 0000FF7 with a contrl C on the keyboard.
Open your bad file copy. They can both be opened at the same time. Highlight those same addresses and contrl V that data into your bad file. Pay close attention thats all you changed. Nothing should have shifted anywhere else. If you screwed up, cntrl Z out of that and try it again until it looks like a clean paste. Yes the data is going to be different in your paste operation as thats why your file is hosed to begin with. Hopefully you just now patched your file. SAVE the potential repaired file using the save icon in 0xED. Open our repaired file
with Audacity, or SoundTrak Pro. You should have a workable file now. If not, go back and try again as perhaps you messed something up or didnt save the repair properly. Its crucial you use data from a good file of the same settings to fix the bad one. If your not sure of the settings you used, try a couple possibilities. Most people use the same settings with only a few variations so your choices should be few hopefully. NOTE: To test your file, close out all instances of the bad file in Sountrak Pro or your new file won't chck out if it is indeed fixed. DO a fresh load of your new file into a freshly started Sountrak Pro or Audacity.
What else have I used? I used SoundHack a few times. Its a bit strange and clunky. The results are hard to nail down. I ended up with a file that played like MickeyMouse but I was able to use Audacity to cut the speed down by 50% and save the audio.
The problems I encountered to get me to this point were as described in the beginning of this write up. I had the beachball. One time Sountrak just quit without warning. Again, the data was there but just wasnt closed out properly.
I hope this saves someone from a disaster. It saved me. I never gave up.
cheers
Johnny
P.S. Here's the data for an AIFF 44.1k 24 bit good file if it can be of use. You'd want to place it right over your bad file in 0xED. No guarantees. Make sure your muckng with a copy and NOT your original file...... (yes thats 4C twice, thats not a misprint)
464F524D0A90582741494646434F4D4D000000120001000000000018400EAC44000000000000464C 4C5200000FC20000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000 0
53534E440B3E3D63
Message was edited by: johnnyU by all means drop me a line if this helps anyone. I'd love to know.

if you did not do a back up of your phone and memory card there is no way to get back the information. you can't roll back anything the memory or firmware once done is done for good. sorry i know this is not good news
You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

How can I Move data from one column to another in my access table?

I have two columns, one that stores current month’s data and one that stores last month’s data. Every month data from column 2 (this month’s data) needs to be moved to column 1 that holds last month’s data. I then null out column 2 so I can accumulates this month’s data.
I understand how to drop a column or add a column, how do I transfer data from one column to another.
Here is my trial code:
<cfquery name="qQueryChangeColumnName" datasource="#dsn#">
ALTER TABLE leaderboard
UPDATE leaderboard SET points2 = points3
</cfquery>
Unfortunately, I get the following error:
Error Executing Database Query.
[Macromedia][SequeLink JDBC Driver][ODBC Socket][Microsoft][ODBC Microsoft Access Driver] Syntax error in ALTER TABLE statement.
How can I transfer my data with the alter table method?

I looked up the Access SQL reference (which is probably a
good place to start when having issues with Access SQL), and
it suggests you probably need a WHERE clause in there.
I agree the documentation is a good place to start. But you should not need a WHERE clause here.
Too few parameters. Expected 1.
If you run the SQL directly in Access, what are the results? At the very least, it should provide a more informative error message..

How do i transfer data from one internal tabe to another.

Hi All,
         How do i transfer data from one internal tabe to another.
         Can i do it ebven if he tables are different in structure.
Please Advice.
Thanks in advance.

Hi Saket Tiwari,
I hope the earlier post by kashyap is good enough an answer. anywas in addition to it let me give a detailed
explanation of how you can populate an internal table.
1) Append data line by line.
     Syntax : APPEND [<wa> TO / INITIAL LINE TO] <itab>.
this appends new line to internal table <itab>.
2) Using COLLECT statement.
             COLLECT is another form of statement used for populating the internal tables. Generally COLLECT is used while inserting lines into an internal table with unique standard key. The syntax for COLLECT statement is as shown
     Syntax : COLLECT [<wa> INTO] <itab>.
3) Using INSERT statement
     Syntax INSERT [<wa> INTO / INITIAL LINE INTO] <itab> [index <idx>].
INSERT statement adds a line/work area to the internal table. You can specify the position at which the new line is to be added by using the INDEX clause with the INSERT statement.
Now coming to your request..
To append part or all of an internal table
     Syntax
              APPEND LINES OF <itab1> [FROM <n1>] [TO <n2>] TO <itab2>.
*     Note:
Without the FROM and TO options, this statement appends the entire table <itab1> to <itab2>.*
b) To insert part or all of an internal table into another internal table
     Syntax
          INSERT LINES OF <itab1> [FROM <n1>] [TO <n2>]
          INTO <itab2> [INDEX <idx>].
c) Using Move statement.
To copy entire contents of one table into another in one execution
     Syntax MOVE <itab1> To <itab2>.
               OR
          <itab1> = <itab2>.
but u hav to be careful because he contents of itab2 will eb overwritten on the execution of this statement.
These copy the contents of ITAB1 to ITAB2. Incase of internal tables with header line we have to use [] inorder to distinguish from work area. So, to copy contents of internal tables with header line the syntax becomes,
ITAB1[] = ITAB2[].
Coming to the letter part of your question, Yes, we can copy values between tables having different structures.
for this we use
                            MOVE-CORRESPONDING <itab1> TO <itab2>
    this executes the statement for their header lines. Searches for the sub-fields which occur both in itab1 and itab2 and then generates, for all relevant field pairs which correspond to the
        sub-fields ni , statements of the form MOVE itab1-ni TO itab2-ni. The other fields remain unchanged.
I hope the information provided has been of your help.
Reward if useful.
Regards,
Jose

How do I transfer data from one exterior harddrive to another?

How do I transfer data from one exterior harddrive to another when they are both connected to our Imac Desktop?

Depends what you want to transfer...
A few more Details about what you are trying to achieve would be good.

How to relocate a Data Centre

Similar Messages

Maybe you are looking for