How to remap the PrtScr, Scroll Lock and Pause keys on a PC keyboard?

This has been bothering me for a long time, I've bought a Cherry's Standard PC Keyboard G80-3000 (forgive to abandoned Apple's USB keyboard) two months ago. It's all good except one thing: THERE IS NO VOLUME CONTROL FUNCTION KEYS ON THIS KEYBOARD!!
The PreScr key act as F13 and the other two are totally dead! Is there any way I can remap those three to: Increase Volume, Decrease Volume and Mute keys?
Or any software can create the shortcuts for volume up and down?
Is it possible or I've been punished?
SOS!!!

There are at least a couple of utilities, namely uControl and DoubleCommand, that do part of what you need (key mapping).
In addition, if you do not worry about XML, you may directly remap your keys following directions you can find here: http://www.hcs.harvard.edu/~jrus/Site/Cocoa%20Text%20System.html

Similar Messages

How do I get my caps lock and tab keys to work again?

how do I get my caps lock and tab keys to work again?

Have a look at > One or more keys on the keyboard do not respond

Quick flash of the Num Lock, Caps Lock and Scroll lock, and keyboard freezes temporarily

I have experienced a Quick flash of the Num Lock, Caps Lock and Scroll lock, and keyboard freezes temporarily. This occurs a few times a day. When the Num Lock, Caps Lock and Scroll lock flash i cant typ for a second the keyboard doesnt register the strokes. Is thsi just a hardware clitch or coudl I have a virus? What is teh solution?

Hello Razm14,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that you are experiencing an issue where your computer freezes and the Scroll Lock, Caps Lock and Num Locks keys flash and you are unable to work until they stop. I would be happy to assist you, but first I would encourage you to post your product number for your computer. I am linking an HP Support document below that will show you how to find your product number. As well, if you could indicate which operating system you are using. And whether your operating system is 32-bit or 64-bit as with this and the product number I can provide you with accurate information.
How Do I Find My Model Number or Product Number?
Which Windows operating system am I running?
Is the Windows Version on My Computer 32-bit or 64-bit?
Please re-post with the requested information and I would be happy to provide you with assistance. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

How can I unlock my ipod touch? The screen is locked and has various languages on the sliding bar. It wont let you touch it

how can I unlock my ipod touch? The screen is locked and has various languages on the sliding bar. the screen is grey and the normal screen saver is gone.

As a first attempt, try a reboot by holding both the power and home buttons untl the apple logo appears and it restarts, ignoring the red slider if that appears.

Question when I log into Firefox, the screen scrolls down and I have to use the side-bar to go back up to type my query into the 'search' window. How can I stop that and get Firefox to start with the 'search' window accessible? With thanks, Peter

Question
when I log into Firefox, the screen scrolls down and I have to use the side-bar to go back up to type my query into the 'search' window. How can I stop that and get Firefox to start with the 'search' window accessible? With thanks, Peter

See this. <br />
https://support.mozilla.com/en-US/kb/Firefox+hangs#Hang_at_exit

When I log into Firefox, the screen scrolls down and I have to use the side-bar to go back up to type my query into the 'search' window. How can I stop that and get Firefox to start with the 'search' window accessible? With thanks, Peter

Question
When I log into Firefox, the screen scrolls down and I have to use the side-bar to go back up to type my query into the 'search' window. How can I stop that and get Firefox to start with the 'search' window accessible? With thanks, Peter

See this. <br />
https://support.mozilla.com/en-US/kb/Firefox+hangs#Hang_at_exit

How can i format an iphone with an differant apple id ?... the phone is locked and it needs the original apple id to activate it which i dont have

how can i format an iphone with an differant apple id ?... the phone is locked and it needs the original apple id to activate it which i dont have .... help me

Moh'd . Hassan wrote:
how can i format an iphone with an differant apple id ?... the phone is locked and it needs the original apple id to activate it which i dont have .... help me
Then get the previous owner to remove it: Find My iPhone Activation Lock: Removing a device from a previous owner’s account - Apple Support

HT1688 Scenerio: Walking in the park and I collaspse unconscious. how would my iPhone4s help a stranger/Police/Medic to know my identiy. The iphone4s is locked and the app for I.C.E. cannot be opened. I am now considered Jane Doe cause I dont have any ID

how would my iPhone4s help a stranger/Police/Medic to know my identiy. The iphone4s is locked and the app for I.C.E. cannot be opened. I am now considered Jane Doe cause I dont have any ID on me.

If you're concerned, you could always create wallpaper with some sort of ID/contact information and place it on the lock screen. I wouldn't suggest using any direct contact for you, of course, for privacy reasons, but perhaps some sort of "neutral" emergency contact such as a relative's cell phone.
Or just carry some sort of ID; depending on a cell phone for identification probably isn't reliable regardless of the phone used. A MedicAlert bracelet or something similar might be your best option since that would allow emergency responders to get your information while still protecting your privacy.
Regards.

I recently did an apps update and now the update is locked and I have 15 apps I can't open. Any suggestions on how to fix this?

I recently did an apps update and now the update is locked and I have 15 apps I can't open. Any ideas on what may have caused this and to fix it?

If Ralph's suggestion doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again. Also, if you have IOS-7, read this.

My iPod touch screen says it is disabled. Connect to iTunes. When I connect the device to the computer a window pops up and said that the iPod is locked and I need to enter the passcode on the iPod..... I can't get it to do anything. Any ideas?

My iPod touch screen says it is disabled. Connect to iTunes. When I connect the device to the computer a window pops up and said that the iPod is locked and I need to enter the passcode on the iPod..... I can't get it to do anything. Any ideas?

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

How to verify the status of lock object???

Hello,
How to verify the status of lock object???
I need to know the status of the lock object and put the user in list.
Exists a FM for this?
Thanks!

You can check the list of lock objects for the ztable by this way....
Go to SE11, click the radibutton for lock object, then do F4 on the field. Click the "All Selections" icon, in the "Basis Table" field, put the table that you want the lock object for. click green check.
Regards.

How to make the Smooth Scrolling work even H Swipe is tick?

In my article, if I tick the H Swipe only and the Smooth Scrolling is Both direction, Why is it in previewing it in my iPad the Scrolling seems Off because it's snapping into the pages.
Smooth scrolling is not working if H Swipe only is tick.
How to make the Smooth Scrolling work even H Swipe is tick?

Horizontal scrolling is only for 1024x768 or 768x1024 pages. That’s it.
You cannot combine horizontal only with smooth scrolling.
Bob

How to identify the device is locked or not?

how to identify the iphone is locked or not

Call AppleCare, give them the model and serial number and ask them if it is locked and if yes, which cell carrier it is locked with.

TS1307 My email won't send as when it was set up an extra letter was accidentally inserted in the address. I need to know how to remove the entire email address and start a fresh.

My email won't send as when it was set up an extra letter was accidentally inserted in the address. I need to know how to remove the entire email address and start a fresh.

Launch Mail.app, select Mail > Preferences... > Accounts and select the account you need to edit in the left column.
The receiving information will be displayed for the selected Account, with a pop-up selector for the Outgoing Mail Server (SMTP) toward the bottom. That selector shows which mail server will be used with this account; to send mail.
Click and hold on that selector, and scroll down (holding the mouse or trackpad clicked) to Edit Mail Server List... and you'll get a sheet dropping down with the mail servers listed.
Select the problematic mail server, and edit it using the Account Information and Advanced items on that sheet.

I'm using iphone 5 but its camera is not properly working. all the images i'm clicking are of dimension 600X800 and the size of the image is just 60-70 kb. now please tell me how to increase the dimension of images and its size.

i'm using iphone 5 but its camera is not properly working. all the images i'm clicking are of dimension 600X800 and the size of the image is just 60-70 kb. now please tell me how to increase the dimension of images and its size.

''rojere [[#question-1055991|said]]''
<blockquote>
i try to keep my thumb palms off the mouse pad when i am typing but every now and then my screen resizes larger or smaller until i take my left palm off the keyboard base its only when my left palm is resting on the base next to the touch pad. i type pretty fast so it gets annoying and yes it also jumps screens or reverts back to previous message and i have to choose ctrl z to undo and get back to my message i was typing... it also switches tabs on me as well... not sure why my palm being on the left of the keypad on the base should effect anything but it does after a while. and i have to stop what i am doing...and go to the firefox menu and change the screen size back down to 100% sometimes it goes up to 200-300 other times it goes down to 70-80% i find it annoying i i wish there was a way to turn off the screen resize in the setup panel. if its just left to be 100% i am happy with that... i don't need it to be bigger or smaller... there should be a way to LOCK it down... i understand that there are people out there with eye problems and needs to have the screen size increase using the + or - but there should be a lock so it just stays no matter what is happening on my keypad or touch pad or base of the pad... that screen size will not increase or decrease. unless i turn off the lock... perhaps this is something they can implement in the next version or do a quick update of the browser
</blockquote>
sorry that is all greek to me thanks for attempting to explain what you were trying to explain sorry i just not tech person to be able to understand or where to begin ... have good day and thanks for again trying

How to remap the PrtScr, Scroll Lock and Pause keys on a PC keyboard?

Similar Messages

Maybe you are looking for