How to reMark an old disk and make it usable for a new disk group?

I can not reuse the old disks:
[root@localhost rc5.d]# /etc/init.d/oracleasm createdisk VOL1 /dev/sda11
Marking disk "/dev/sda11" as an ASM disk: [ OK ]
[root@localhost rc5.d]# /etc/init.d/oracleasm createdisk VOL2 /dev/sda12
Marking disk "/dev/sda12" as an ASM disk: [ OK ]
[root@localhost rc5.d]# /etc/init.d/oracleasm createdisk VOL3 /dev/sda13
Marking disk "/dev/sda13" as an ASM disk: asmtool: Device "/dev/sda13" is already labeled for ASM disk ""
[FAILED]
[root@localhost rc5.d]# /etc/init.d/oracleasm createdisk VOL3 /dev/sda13
Marking disk "/dev/sda13" as an ASM disk: asmtool: Device "/dev/sda13" is already labeled for ASM disk ""
[FAILED]
[root@localhost rc5.d]# /etc/init.d/oracleasm createdisk VOL4 /dev/sda14
Marking disk "/dev/sda14" as an ASM disk: asmtool: Device "/dev/sda14" is already labeled for ASM disk ""

More info – the phone was used (by me) with a data plan for about two years.
The SIM card that's in the phone is the same as when I first purchased it.
I can easily activate it – just not without purcahsing a data plan.

Similar Messages

How do I delete old .mac and .me email addresses from the new iCloud email server?

Now that I have iCloud, all the old .mac and .me email that I never used feeds through it. Since there is no SPAM filter, I cannot block these emails from getting through and I get lots of spam now. How do I delete the .mac and .me email addresses?
Thanks.

I set the Rules months ago to automatically put all email sent to those email addresses in TRASH. However, they still appear in my Mail Trash on my Mac. Just an annoyance. Thanks for the response.

How to get index of cluster and make popup vi for every event

Hi
I have problem. the problem is i have to find out the index of cluster.
I have an event "mouse down" from this cluster and index should be the value where i put my mouse.
2nd thing is curently i am just abel to display only 1 popup. but i need each pop up for every every element where i move my mouse
thanks in advance.
BR

altenbach wrote:
Use a "value change" event on the array and do a "not equal" on the old a new value. Only the changed value will result in a true. Use search array to find the TRUE in the "not equal" array and the resulting index points to the changed element. You can do basically the same with clusters, by using "cluster to array" at the right time.
Here's what I had in mind (LabVIEW 8.2)
LabVIEW Champion . Do more with less code and in less time .
Attachments:
DetectElementChange.vi ‏17 KB

How do I re-set the old IPad to make it ready for a brand new user? Is it simply the Restore command in ITunes?

Purchased an IPad 2 and will be giving my first generation IPad to my wife. What is the easiest way to re-set the old IPad to make it ready for a new user?
Is it simply the Restore command in ITunes?

Do a full sync/ back up of the old one first. Then you can sync the new one to the old backup. When you are all ready, on the i pad, goto system . General . Reset. and select erase all content. Turns the old one into out of the box condition.

Can I take my old mac and make it into an external hard drive

Can I take my old mac and make it into an external hard drive? It does not work anymore but I would like to make it into an external hard drive. I heard it is not to hard to do myself but I have important information I would like off of it and only really trust the apple store to do it. I know it is possible because I have had a friend that had it done after water went on her laptop. I would like to also know how much is this going to cost and if it is even worth getting done at the store or just do it myself.

Can it boot to Target Disk Mode
How to use and troubleshoot FireWire target disk mode
Otherwise just take the HD out and put it in an external enclosure.

New HD- how do I copy orig HD and make it the master?

Hi everyone,
I just installed an internal 160GB Seagate drive into my computer which is running 10.2.8, on 12GB original hard drive.
I just placed it in there and plugged it in. Machine was shakey on startup, but it finally showed me the desktop, but no icon for the new disk on there. but luckly, It showed up in system profiler (it says I have 120GB, I know I need a ata thing, but that's fine for now)!
I got into disk utility and partitioned it into 2 parts for (graphics mainly) applications and hard drive info- 60GB. I'll use the other half for storage. Both partitions now appear on my desktop-whew.
how should I go about making the new drive- disk utilities says it's the slave- into the master? (12GB original HD vs. 60GB partition)
Should I just drag and drop files to the new partition? I DL'd that "super duper!" program, should I use that?
and after I do that, should I switch the jumpers on both hard drives to make 120GB the master?
Does it have to be the master to be the startup disk?
why does it have to be the master?
thank you. I love this forum, and I tell everyone about it.

Hi,
You need Carbon Copy Cloner.
Here is a post that I made for another user.(who had a laptop)
In X you cannot drag and drop the system like you could in preX systems.
You have to use a program like Carbon Copy Clone or Super Duper or the restore function in Disk Utility. Each has its benefits and liabilities.
My favorite is Carbon Copy Clone. Here is a post I made to another thread on this topic.
A clone is just what it says. It is an exact copy of the parent.
Unlike the mac os's prior to X, you cannot just drag and drop your system or many of it's folders to another hard drive/partition to copy them. There are invisible files and links between files that have to be maintained. No problem, you just use a program for cloning. I have used Carbon Copy Clone for years and for making a simple clone it is easy and works well.
To start with, you need another hard drive. You will need an external firewire drive to make it bootable (a combo firewire/usb is fine but just usb won't work on our macs. The newer Intel macs are usb bootable but ours just work on firewire). Once you have the external drive plug it in, turn it on and format it using Disk Utility to hfs+ journaled. If you want to split the drive in 2 or more parts you can do it now. Keep in mind that you need at least as much space on the clone as the parent takes. To split the drive later would require erasing it's contents so decide if you want to have more than one copy of your system (one for testing the other for backup or what ever). This is all done with Disk Utility.
Now that you have the destination for cloning download CCC
http://www.versiontracker.com/dyn/moreinfo/macosx/13260
(This site is also a great one for downloading share ware, updates, etc. so book mark VersionTracker.com).
First open your preferences and select Energy Saver. Set it to a couple of hours or just turn it off. You don't want to sleep during the clone process. You might also want to plug your laptop into the power supply.
Once downloaded, drag CCC to the Applications folder, start it and you will get the panel for cloning. Click the preferences and select "repair permissions before cloning and make bootable".
Close the preferences and on the main panel your source is your current hard drive. The destination is the external drive (or one of it's partitions if you decide to split the hd). Click the lock at the bottom to bring up the authentication window, enter your name, click the clone button and go watch tv or something.
When it is finished you will get a window telling you so. Don't do web surfing or Photoshop work while cloning. If you can't remember what programs are running before cloning then just restart your mac and go directly to CCC or whatever program you decide to use (some like SuperDuper also available on VersionTracker.com. Just enter "clone" in the search window).
When it is all done try booting from your clone. You hold the option key down at boot and with the firewire drive on you should get a screen with both the laptop's hard drive and your external drive as valid start drives. Select the external and it should boot. If it does not go back to your main drive, open preferences and select Startup Disk. Your clone should appear there. Select it and restart. If it still does not work then your clone is bad but in 3 years of cloning I think that this happened one time.
If you ever mess up the main laptop drive or it dies you can start your laptop off the clone, start CCC, erase the laptops messed up/or new drive and clone your backup to the laptop. Now a catastrophic failure of the system or the hard drive won't cost you any lost info and time.
I keep several clones on several drives for backup. Every few months I use dvd's to back up critical customer files but in the interim it is clones of the main drive. When major updates to the system come along and I'm going to install them it is never without making sure that I have an up to date clone to fall back on. Years ago I had a drive fail that I thought was backed up on cd's. It was an expensive lesson in backing up. Since then I have had half a dozen hard drives fail so my paranoia with multiple clones. Cloning is the easiest way to make sure everything is backed up.
Message was edited by: Carl Jerris

How do you sync voice memos and make CD's of them?

How do you sync voice memos and make CD's of them?

When you sync the phone with your computer voice memos are copied to your iTunes library with the Genre "Voice memo".
To burn to CD you do it the same way you would any music; create a playlist of the memo(s), the right click on the playlist and choose "burn to CD".

How do I clear the Disk and reinstall the OS on my new Mac Mini without an Optical Drive?

How do I clear the Disk and reinstall the OS on my new Mac Mini without an Optical Drive?

If it's a new mini, should have Mtn Lion on it. In any case, restart into recovery mode, and follow the instructions.

How do I take a photo and make it the shape of the object I choose, eg. oval, etc?

How do I take a photo and make it the shape of the object I choose, eg. oval, etc?

I am not in front of a Mac at the moment but believe it is:
select the image > Menu > Format > Mask with shape > choose oval
Peter

Deleted recently added playlist how do i add back to playlist and make destination playlist for imports

i deleted recently added playlist and want to add back, and make it destination for imported songs how do i do

Howdy Mark,
The Recently Added playlist is a Smart Album that has specific settings to automatically add new content to that playlist. It can be recreated manually if accidentally deleted, you can use this article named Archived - iTunes: How to create a Smart Playlist found here http://support.apple.com/kb/HT1801.
Choose File > New Smart Playlist.
To have iTunes add songs that match specific criteria, make sure to select "Match the following rule," then make your selections from the pop-up menus.
For example, you might want iTunes to only add songs that are by a particular artist, or songs with at least a four-star rating.
To add additional matching criteria, click the Add + button.
Here are the parameters to use when you create the new Smart Album:
1. Check the box that says Match the Following rule:
2. Change the first set of criteria to Date Added, In the Last, 2, weeks.
3. Add another line for criteria by clicking the + button
4. The second set of criteria should be as follows. Media Kind, is not, podcast.
5. Uncheck Limit To, and Match only checked items, and check Live Updating.
That when that is done you will have a new smart playlist that you can rename to Recently Added by double clicking the smart album name.
All the very best,
Sterling

How to clean up my mac and make it run faster

I want to know how to clean up my mac and make it run faster.. seems very bogged down lately and doesnt do stuff very fast anymore..

macworld.com/mac-troubleshooting-what-to-do-when-your -computer-is-too-slow.
Basically... Make sure you have enough Free Hard Drive space for your Mac to Perform as expected...
This is what Apple has to say.
http://support.apple.com/kb/PH10798
More Info Here...
ds store > Why is my computer slow?
Thomas A Reed > Mac Performance Guide
To keep your Mac Happy... See Here...
http://support.apple.com/kb/HT1147
http://www.thexlab.com/faqs/maintainingmacosx.html
Mac OS X: About background maintenance tasks

How to create website on iweb and make it public, and tell me how to put a password on it.

Hi, can you tell me how to create website on iweb and make it public, and tell me how to put a password on it, thanks.

Find a webhosting company :
http://www.google.jo/search?q=webhosting+jordan
They will provide the instructions how to password protect a directory (=folder)?
Until you find one, you can practice on your own computer :
http://www.wyodor.net/Tutorials/iWebDemo/sFTP.html
Here's a some tutorials :
http://www.apple.com/findouthow/web/

How to keep the Sonogram settings and make them "Sticky"?

I am a Forensic Audio Examiner and would love to use Soundtrack Pro. Does anyone know how to keep the Sonogram settings and make them "Sticky" so you don't have to reset it every time you open up the project?
Also the Sonogram loses it's frequency range settings while changing the zoom.
Where is the feedback link for this application?
Thanks

are you talking about the spectrum analysis?

How do I uninstall creative cloud on my old laptop and reinstall creative cloud on my new laptop?

How do I uninstall creative cloud on my old laptop and reinstall creative cloud on my new laptop?

There is no need to uninstall on the old machine, but you can sign out thru the CC Manager if you like and then uninstall like you would any other software (depends on your operating system).
To install on the new machine repeat what you did originally with the old machine...
Download/install the desktop application, sign in, install the subscription application(s).
Creative Cloud for desktop
https://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html
Sign out, Sign in | Creative Cloud desktop app
http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html
Activation & deactivation help
https://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html#a ctivate-how-to
Install, update, or uninstall apps
http://helpx.adobe.com/creative-cloud/help/install-apps.html
Installing Creative Cloud Apps
http://tv.adobe.com/watch/cs6-creative-cloud-feature-tour-for-video/installing-desktop-app s-from-creative-cloud/

How to save a list template and make use of it in another website as webpart ?

How to save a list template and make use of it in another website as webpart ?
1. Save As "List A" as .STP
2. Go to another website, in the document workspace I try to Add webpart -> Browse -> Upload the STP file, but after that the List A webpart still doesn't appear.
Any clue which part went wrong?

Hi,
firstly you need to upload the .STP file to a list solution gallery of the site and then you can add the list (under custom name) to the webpage
see here for how to-
http://office.microsoft.com/en-us/sharepoint-server-help/copy-or-move-a-list-by-using-a-list-template-HA101782479.aspx
Hope this helps!
Ram - SharePoint Architect
Blog - SharePointDeveloper.in
Please vote or mark your question answered, if my reply helps you

How to reMark an old disk and make it usable for a new disk group?

Similar Messages

Maybe you are looking for