How to remotely access a Function Module

Hi ,
I am working on XI and SAP scenario , wherein , I want to import a function module in the XI imported objects..
To import these Function Module as RFC , these FM should be remotely accesible.
So to do so , wat settings are neccesary while creating FM and making it remotely enable?/
Pls help out.

Here , I clicked radio button for Remote Enable.
When i declare import and export parameters
ex. num1 type i,
it gives error as
"reference parameters are not allowed with RFC"
How to resolve this issue?

Similar Messages

How can i access RFC Function module in BI

Dear Experts,
I have a RFC fm in BI system which will allow me to write data into BI DSO, but when i am trying to select that from BI system their is no option to select a service, but when we go to ECC or CRM we can find option Service through with we can select BAPI or FM (RFC enabled)
is their a option or a workaround for me to do it please.
thanks and regards
Neel

Hi Neel,
Do the following Checks first:
1. Go to the Find data tab and select the System(System alias will apeear ) you had designed form the Drop down of list of systems .If you are not able see the sytem here means you did not done the usermapping.
2.if you are able to find your system in the drop down the in the Search for service option eneter the quiery or FM or your Bapi/RFC name and the click on serach button.
if still you have problem plz contact me without any problem
Regards,
Govindu

1...how to find that a function module belongs to normal function module or

Hi to all.........
1...how to find that a function module belongs to normal function module or remote enabled function module?
Thanks and regards,
K.Swaminath reddy

Hi Swaminath,
Go to Transaction SE37.
In The Remote enabled function module, in the Attribute tab radio Button "Remote Enabled module will be selected and in the Normal Function Module, Normal Function Module will be selected.
Regards,
Mukesh Kumar

Crystal Reports 2008 can't see/access ECC function module

My team is developing our first Crystal Report directly against ECC data and are experiencing the following problem:
Our ABAP team created a custom RFC to provide the needed data, but we are unable to see a full list of available Functions and list of available tables from SAP ECC data source.
We worked with Security and temporarily ran under SAP_ALL authority but were still unable to see/ access the function module. We have the integration kit installed and can see some function modules from within Crystal, just not the ones we need. Is there some trick to creating a function module so that it is visible to Crystal?
Environment Details:
Crystal reports Version- 12.2.3.467
SAP GUI # 7200.1.2.1051
CRDB_OpenSQL.Dll # 12.2.3.467

Hi Ingo. I enjoyed your BO 4 seminar and meeting you at ASUG/Sapphire. I was hoping you'd pick this up.
The connection options shows the info below. It doesn't seem to be telling us how to filter to either select or exclude SAP ECC function modules. It has options to? Are these options correct to see ECC function modules and should we be seeing other options?
Database tab (only tab in dialog)
- Show name description or both (Show description selected)
- Sort tables or fields alphabetically (sort tables selected)
- Select tables, views, system tables, synonyms, and stored procedures (all except synonyms selected)
- Table like and owner like (both blank)
Advanced Options (x = selected)
- (X) Use indexes on server
- ( ) perform grouping on server
- (X) Database Server is case sensistive
- (X) Select Distinct for Browsing
- ( ) Perform query async
- (X) Verify on first refresh
- ( ) Verify stored procedures on first refresh
- (X) verify when database driver upgraded
- (X) Automatic smart linking

How to create a callback function module

Hi all,
I am working in a requirement where we need to call a function module at a 'after change' event. So how to create a callback function module and register it with the crmvevent ?_
I created a sample function module and try to create entries in table crmv_event_cust, but i got an error message saying that the function module name I provided is not in table CRMC_FUNC_ASSIGN. When I try to create entry there, I got a message that function module is not in CRMC_OBJ_FUNC and that table is a standard table with no maintanance options !!
looks like i am going in wrong way ... can any one please help ??

Looking at my system all you need to do is create the entry for the callback function in maint view: CRMV_FUNC_ASSIGN.
Your entry should be as simple as Z-function name Object Function - <same as others in the segment you are assigning>
IE for the partner it would be CRM_PARTNER as object function, for general order processing CRM_ORDER
Take care,
Stephen

How to check for a function module with its description and functionality

Hi all,
How to check for a function module,with its description and its functionality,in detail how can I know the purpose of a particular function module,how to search for a function module which suits my requirement .

Hi,
You can search a FM of your requirement by putting in the Key words and searching for a FM. Like * KEYWORD * and then pressing F4.
Say for example you need to search something regarding converstion.
Search for * CONVERT * and press F4.
If there is something specfic like converting date to something you can give
DATE * CONVERT *
OR
CONVERT * DATE * and press F4.
Once you narrow down your search you will have a Function module documentation inside the Function module. Please note that all the FMs willl not have documentation.
Regards,
Pramod

How to go into a function module through SE80 t - code

Hi All ,
How to go into a function module through SE80 t - code.
Thanks in advance.

>
Balaji Krishnamoorthy wrote:
> Hi All ,
> How to go into a function module through SE80 t - code.
>
> Thanks in advance.
Hi,
With help of function group
Thanks & Regards
Edited by: Always Learner on Oct 16, 2008 2:31 PM

How to config Check Digits function module for Student Number Validation

Hi SLCM Experts,
In the SAP-SLCM, How to use check digits function module for validate student number. Just only config it or need to customizing program.
*Any idea to student number validation in SLCM?*
Best Regards,
Suvatchai K.

Hi ,
Can you expalin it further ?
You configure the St. no in piq_matr . And set it as external or internal no. range which suits your business .
What is the validation you are looking for ?
Regards
Gajalakshmi

How to connect our outbound function module to the message type

how to connect our outbound function module to the message type any transcation code exits to assign the message type with the function module .
Thank in advance .
A. Thiru

Hi Thiru,
Standard Transaction Codes, have their own Function Modules for generating Outbound/Indbound Idocs. Where these Function Modules will be configured to a particular Process Codes.
For E.g for PO's
Process code : ME10 - IDOC_OUTPUT_ORDERS - for creation
In case if its a Z Function Module, It depends on the case how you use IDOC types. either directly through Z Program or through Inbound/Outbound Process codes with respective Function modules.
Regards,
Anbalagan

How to create a custom function module with the records in SAP R/3?

Hi All,
How to create a custom function module with the records in SAP R/3? Using RFC Adapter I have to fetch the custom function module records.
Regards
Sara

Hi
goto se37...here u need to create a function group... then u need to create a function module. inside assign import/export parameters. assign tables/exceptions. activate the same. now write ur code within the function module
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db98fc35c111d1829f0000e829fbfe/content.htm
Look at the below SAP HELP links, These links will show you the way to create a Function Module
http://help.sap.com/saphelp_nw04/helpdata/en/26/64f623fa8911d386e70000e82011b8/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db98fc35c111d1829f0000e829fbfe/content.htm

How to code a predifined function module in sap ,in se37.

can any one tell me how to code a predifined function module in sap ,in se37.it's an immediate requirement.if u give a brief description it'll do.

Hi Henry,
There are two possible ways in which I can interpret your question.
1. You want to create a new Function Module in SE37. you will have to refer to the <a href="http://help.sap.com/saphelp_47x200/helpdata/en/d1/801e9a454211d189710000e8322d00/frameset.htm">Function Builder</a> tutorial for that.
2. You want to use an existing function module in your program. In the code of your program in SE38, click the button <i>Pattern</i>. On the pop-up, give the name of the function module that you wish to use in your program.
Regards,
Anand Mandalika.

How to replace obsolete download function module in ECC6.0?

Hi Experts,
How to replace obsolete download function module in ECC6.0?
Thanks,
Adi.

Hi,
DOWNLOAD is obsolete FM in ECC 6. To get the same functionality , we need to use
CL_GUI_FRONTEND_SERVICES=>FILE_SAVE_DIALOG method (It provides the File selection feature)
and
GUI_DOWNLOAD function module.(It downloads the internal table from program to presentation server)
Please see the example below:
Example:
*CALL FUNCTION 'DOWNLOAD'
          EXPORTING
               FILENAME            = p_filename
               FILETYPE            = DAT
          TABLES
               DATA_TAB            = T_DOWNL
          EXCEPTIONS
               INVALID_FILESIZE    = 1
               INVALID_TABLE_WIDTH = 2
               INVALID_TYPE        = 3
               NO_BATCH            = 4
               UNKNOWN_ERROR       = 5
               OTHERS              = 6.
*End of deletion CH01-
Replacement Method for above code:
DATA: l_filename    TYPE string,
       l_filen       TYPE string,
       l_path        TYPE string,
       l_fullpath    TYPE string,
       l_usr_act     TYPE I.
l_filename = P_filename.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>FILE_SAVE_DIALOG
EXPORTING
    DEFAULT_FILE_NAME    = l_filename
CHANGING
    FILENAME             = l_filen
    PATH                 = l_path
    FULLPATH             = l_fullpath
    USER_ACTION          = l_usr_act
EXCEPTIONS
    CNTL_ERROR           = 1
    ERROR_NO_GUI         = 2
    NOT_SUPPORTED_BY_GUI = 3
    others               = 4.
IF sy-subrc = 0
      AND l_usr_act <>
      CL_GUI_FRONTEND_SERVICES=>ACTION_CANCEL.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
    FILENAME                        = l_fullpath
   FILETYPE                        = 'DAT'
TABLES
    DATA_TAB                        = T_DOWNL
EXCEPTIONS
   FILE_WRITE_ERROR                = 1
   NO_BATCH                        = 2
   GUI_REFUSE_FILETRANSFER         = 3
   INVALID_TYPE                    = 4
   NO_AUTHORITY                    = 5
   UNKNOWN_ERROR                   = 6
   HEADER_NOT_ALLOWED              = 7
   SEPARATOR_NOT_ALLOWED           = 8
   FILESIZE_NOT_ALLOWED            = 9
   HEADER_TOO_LONG                 = 10
   DP_ERROR_CREATE                 = 11
   DP_ERROR_SEND                   = 12
   DP_ERROR_WRITE                  = 13
   UNKNOWN_DP_ERROR                = 14
   ACCESS_DENIED                   = 15
   DP_OUT_OF_MEMORY                = 16
   DISK_FULL                       = 17
   DP_TIMEOUT                      = 18
   FILE_NOT_FOUND                  = 19
   DATAPROVIDER_EXCEPTION          = 20
   CONTROL_FLUSH_ERROR             = 21
   OTHERS                          = 22.

How can i use reuse_alv_fieldcatalog_merge function module

I am using below steps for populating the final internal table.How can I use reuse_alv_fieldcatalog_merge function module in the place of declaring all these fields.How canI put title of the report in reuse_alv_fieldcatalog_merge function module.
FORM BUILD_FIELDCATALOG .
FIELDCAT-TABNAME   = 'IT_FINAL'.
FIELDCAT-FIELDNAME = 'KUNNR'.
FIELDCAT-SELTEXT_M = 'Customer Name'.
FIELDCAT-JUST      = 'L'.
FIELDCAT-KEY       = 'X'.
FIELDCAT-DATATYPE = 'C'.
APPEND FIELDCAT TO I_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME   = 'IT_FINAL'.
FIELDCAT-FIELDNAME = 'VBELN'.
FIELDCAT-SELTEXT_M = 'Invoice Reference'.
FIELDCAT-JUST      = 'L'.
FIELDCAT-KEY       = 'X'.
APPEND FIELDCAT TO I_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME   = 'IT_FINAL'.
FIELDCAT-FIELDNAME = 'VKBUR'.
FIELDCAT-SELTEXT_M = 'Sales Office'.
FIELDCAT-JUST      = 'L'.
FIELDCAT-KEY       = 'X'.
FIELDCAT-DATATYPE = 'C'.
APPEND FIELDCAT TO I_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME   = 'IT_FINAL'.
FIELDCAT-FIELDNAME = 'VKGRP'.
FIELDCAT-SELTEXT_M = 'Sales Person'.
FIELDCAT-JUST      = 'L'.
FIELDCAT-KEY       = 'X'.
FIELDCAT-DATATYPE = 'C'.
APPEND FIELDCAT TO I_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME   = 'IT_FINAL'.
FIELDCAT-FIELDNAME = 'POSNR'.
FIELDCAT-SELTEXT_M = 'Item No'.
FIELDCAT-JUST      = 'L'.
FIELDCAT-KEY       = 'X'.
APPEND FIELDCAT TO I_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME   = 'IT_FIANL'.
FIELDCAT-FIELDNAME = 'ARKTX'.
FIELDCAT-SELTEXT_M = 'Item Description'.
FIELDCAT-JUST      = 'L'.
FIELDCAT-DATATYPE = 'C'.
APPEND FIELDCAT TO I_FIELDCAT.
CLEAR FIELDCAT.

Hello,
It is very easy to use reuse_alv_fieldcatalog_merge.
You try this it will work.
example
data:
DATA : gv_repid        TYPE syrepid VALUE sy-repid . " Report id
PERFORM set_field_catalog USING gst_struct CHANGING lst_fieldcat.
FORM set_field_catalog USING uv_tab TYPE slis_tabname
                     CHANGING xt_fieldcatalog TYPE slis_t_fieldcat_alv.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
    EXPORTING
      i_program_name         = gv_repid
      i_internal_tabname     = uv_tab
      i_inclname             = gv_repid
    CHANGING
      ct_fieldcat            = xt_fieldcatalog
    EXCEPTIONS
      inconsistent_interface = 1
      program_error          = 2
      OTHERS                 = 3.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM.                    " set_field_catalog_spec

How to use SWC_CREATE_OBJECT in Function Module

Hi All,
I need to create a one function module to fill the work flow container field. this work flow builder had only one task, that task is triggering through QM Action box. I need to maintain this function module in AM Action box, FM when saving field.
Please help me how to create a new function module in QM Acion box. When run the QM02 with usage decesion option is triggered Associated task is triggering, now how i will pass the notification number to work flow container.
Please help me

I think you can
SWC_CREATE_OBJECT 'QMObject' Object Key
Or you can pass the QM number to the Workflow and use GENERICINSTANTIATE Method of Business Object SYSTEM to instantiate the QM Business Object.
Thanks
Arghadip

How can i use this function module

Hai
How can i use this function module /SAPHT/SALES_ORDER_READ, already apply the some parameters in this function module, but it shows the error , please tell me, how to declare the parameters in this function module ,
thanks
neelima

Hi
For a particular sales order,you have to pass the order number and the item number in the sales order.
It will display the rest of the values which u can capture them using internal tables.
Regards,
Vishwa.

How to remotely access a Function Module

Similar Messages

Maybe you are looking for