How to remotely control another mac

How can I control remotely another Mac running Mac OS X Lion?

Hi Jorge,
If locally enable Screen Sharing on the Lion Mac, if remote try someting like LogMeIn...
https://secure.logmein.com/products/free/

Similar Messages

Remote Control another Mac?

I've tried to read up on this but couldn't quite grasp how to set it up properly, if anyone could offer any help?
I would like to use a Mac to control another Mac via the internet - i.e. by remote means.
The purpose is to demonstrate how to do something to another person, for instance, by moving the mouse on their screen to load iTunes or something similar - to show how to do simple procedures.

There are several, VNC client/servers like Chicken of the VNC, Timbuktu and logmein.com
http://cotvnc.sourceforge.net
http://www.netopia.com/software/products/tb2/
http://logmein.com

How to remotely control my Mac at home?

I'm at work on a Mac Pro.
I want to control my iMac at home.
Both of the Macs are running OS Lion (10.7.5).
I just bought Apple Remote Desktop software.
How do I connect & control my Mac at home?
Thanks,
Wayne

You need something different since Remote Desktop only works on the same network. You were not clear.
You need one of these:
Set up and use Back to My Mac - Apple Support
Commercial products like
TeamViewer, free for non-commercial use
LogMeIn
GoToMyPC

How do I control my mac from another mac not in the same network?

How do I control my mac from another mac not in the same network? Thanks

You can do it manually, but it is much simpler if you use a tool such as Back To My Mac, LogMeIn, or something like that. Those programs enable you to connect to your computer through your router without you having to adjust the router settings manually.

Remotely Controlling A Mac From A PC

How can someone remotely control a Mac from a PC?
What would need to be set to allow a PC access?

If you have enabled remote access (ssh) and you have configure your router to allow incoming ssh connections to your mac then you could access your mac via a terminal something like Putty on your pc and turn on screen sharing via the terminal.
10.5: Start screen sharing remotely in Terminal
You could install vine server on your mac, and again that could be lauched via an ssh connection.

How do i control my mac without mouse, trackpad, ect?

magic mouse won't work. trackpad worked like crap, so i broke it.
cintiq works ok, but not with touch.
how can i control the mac without a mouse or trackpad? is ther a wired method to make the ipad control the mac?

You can do it manually, but it is much simpler if you use a tool such as Back To My Mac, LogMeIn, or something like that. Those programs enable you to connect to your computer through your router without you having to adjust the router settings manually.

How can I see another mac backup on time machine?

how can I see another mac backup on time machine?

Bob thanks, but that didn't solve my problem, I went to question 17 and went into the Browse my Time Machine and it also didn't find or recognize the other Mac. I know it's in there because when I open the other Mac and Enter the Time Machine, I can see it through that Mac, and I have the same problem there, where I can't see my Mac.
In short, when I back up a Mac (doesn't matter which one) I can verify its backup as long as I use that Mac, but I cannont verfiy the backup on that Mac using another Mac and vice versa.
Also, I never used to have to do anything to see both on the same Mac. So I don't know what changed.
There must be another way.
Thanks

How can I control a mac mini connected to a benchmark dac 2 for the purpose of listening to 24/192 audio files?

How can I control a mac mini connected by USB to a Benchmark DAC 2 for the purpose of listening to 24/192 music downloads?

Hello,
About the dac 1, but may apply to the dac 2 as well in some ways...
Here are more details:
1) The current version of iTunes (7.5) for OSX is very broken. Some older versions work properly, but 7.5 introduces truncation and DSP artifacts that can measure as high as –80dBFS. These levels are easily audible. There is no system configuration that will permit transparent playback from 44.1kHz sources with iTunes 7.5. Curiously, the only format that works properly in 7.5 is 24-bit/96kHz. This iTunes problem has nothing to do with USB communications, as the results are the same when using the built-in optical port on our PowerBooks. As a workaround, we suggest using the free VLC for Mac player. VLC works perfectly with all formats (provided OSX is set to match the sample rate of the files being played). We highly recommend the VLC player for OSX users, and strongly advise against using iTunes. We will attempt to identify which versions of iTunes work and which ones don't. But beware, iTunes updates itself without user intervention. One of our test computers "upgraded" itself to the dysfunctional iTunes 7.5.
2) OSX still does not have the ability to follow sample-rate changes. We consider this a nuisance for most users and a show-stopper for users who want to play a mixed list of 44.1kHz and 96kHz material. An OSX sample-rate mismatch will invoke the very-poor-quality sample-rate conversion that is built into OSX. The iTunes 7.5 bug seems to be locking on this sample-rate conversion at all sample rates other than 96kHz. Until this is fixed, OSX is not the operating system of choice for audio playback.
http://www.stereophile.com/content/benchmark-dac1-usb-da-processor-headphone-amp lifier-manufacturer-comment

HT1941 how do i remote control my mac mini from my macbook air

I want to control my iTunes library from my mac air. How do I setup the remote control to accomplish this?

1. Use the Remote App on iDevices. There are third-party apps also available.
2. Use Screen Sharing on the MBAir.
3. More elaborate solutions using the IR Remote and IR Blasters are also possible.
4. AirParrot and Beamer may also provide some capabilities.
5. AirPlay requires ATV and a Mac.

How do i remote control another imac

I used to use ichat to help out my mom with her mac remotely. Does facetime allow me to do this? What happened to ichat?

Yianni Macris wrote:
How do I remote control my iMac
In what way do you want to control it, turn the volume up or control the whole computer.

Remote control of Mac via Flash iOS app

Hi all
I am a very trial-and-error Flash coder but have managed to create a (I think) pretty serviceable VJ system - see http://www.smashedupsoiree.com/magic-wall/
There are two Flash movies that run concurrently on the same Mac. One is the video content itself which is displayed by a projector; the other is the Controller movie which runs on the mac laptop screen. The two movies communicate by LocalConnection. I have had some success using VNC apps on an ipad which grabs the screen from the Mac and therefore enables this Controller movie to be effectively operated as a touch screen, portable interface. However there are latency issues with VNC - not what you need for a live performance tool!
I am considering instead developing the controller as a packaged-for-ios app to reduce the latency issues. If I do so, does anyone know how it will be able to control the flash movie running on the mac on the same network? (In the vein of these kinds of apps: http://mashable.com/2010/02/28/iphone-remote-control-apps/ )? I have read that Local Connections do not work in Packaged-for-iOS apps. Would I instead use Apple APIs? How is this done via Flash Actionscript? I would want to either control the Mac-based movie like a LocalConnection or even simulating keypresses would be fine, that I can then detect with the Mac Flash movie.
As I mentioned before, I'm no professional coder so the whole matter is a bit blurry to me! Any pointers would be much appreciated...
Gerred

teamviewer is a pretty big player also works across the Internet

Remote control a Mac server from Windows machines

I'm running a Mavericks Server that I'd like to get off my desk and put in the data center. However, my primary laptop is a Windows 8.1 laptop that I use to support other things. I'd still like the ability to remote into the Mac Server from my Windows laptop. I know that I can VNC into the server, but it's my understanding that if I have Remote Management turned on, I can't have Screen Sharing (and thus, VNC) turned on. So it seems like my options are to run another VNC server on a different port or use LogMeIn Ignition. But I'm not sure what other people are using so I'd like your help. Thoughts? Suggestions?
TIA

As you have found via the answer provided by Morgan R, it is possible to configure Remote Management to allow standard VNC clients to connect just like it is possible with Screen Sharing.
Note: Remote Management does everything Screen Sharing does plug other things. So anything you can do via Screen Sharing you can do via Remote Management.
However there is a client available for Windows that does support the extended login information used by Remote Management/Screen Sharing, this is 'Remotix' by Nulana.
See http://www.nulana.com/remotix-windows/
I have tried it and it does work. I did however find one serious bug which I have reported to them but I don't know if they have fixed it yet.
Over the years I have found many in fact nearly all software that involves linking Mac and Windows where one controls the other in either direction has suffered an inexcusable bug whereby if you are not using US keyboards at both ends then several keys will not be mapped properly and you can even end up with some keys not usable at all. The most infamous combination is the @ and " keys being swapped.
All these programs appear to have been written by Americans who are members of the 'flat earth' society and obviously believe that if you leave the shores of the USA you will fall of the edge of the world. I presume they also are avid fans of the Discworld series of books.
Offenders include Virtual PC, Microsoft Remote Desktop Client 1.0 (for Mac), Timbkutu Pro, Remotix and I am sure many others.
Note: Microsoft did at least fix theirs several years later with Remote Desktop Client 2.0 (for Mac).
The one noteable exception is VNC. VNC was originally developed at AT&T Laboratories in Cambridge, England. (Not New England.)
See http://www.cl.cam.ac.uk/research/dtg/attarchive/vnc/ I am sure if it had been developed in Cambridge, Massachusetts it would have suffered the same problem. Since Screen Sharing on Macs is based on VNC it has never suffered this problem even when controlling a PC via VNC. I am therefore even more shocked that Nulana managed to make this mistake.
To our dear American friends in the colonies, you might want to read http://uk.ask.com/question/who-discovered-that-the-earth-was-round

Can I edit a project on one Mac remotely from another Mac?

As far as I know, you can access and control a Mac from another Mac that is not on the same network, say if you are travelling with a MacBook Air and need to access files and applications on your iMac at home.
I'm wondering if it's possible to work with Final Cut Pro X in this way. So you could access the project on an iMac from a MacBook Air, see the screen of the iMac and enjoy all the power of the iMac for editing and exporting in FCPX while controlling it from your MacBook Air.
If so, that would be so convenient, whether it be while travelling or even when at home and wanting to make a quick adjustment to something from the MacBook Air resting on your lap.
Has anyone here ever done this or know if it's possible?
Thanks!

There are ways you can access the iMac and the screen and the software but it's not useable as an editing platform. The response time over the Internet is way, way, way to slow. Plus no keyboard shortcuts work. Everything has to be mouse driven.

How to remotely control WebAS

Hi,
I'm using NetWeaver 2004S, NewYork 711 and NewYork 720, I want to find a solution to remotely control the server, such as remotely re-start WebAS or a specified service, (these WebAS cover windows, Linux, and unix platforms), it would be better if just a command, and I onlyneed to provide the connection parameters.
I know there must be a solution, but I haven't idea how to do this, anyone can help me?
thanks in advance!
Regards,
Qinzhu

Hi,
maybe a standard webservice could help you, with this address :
http://<hostname>:port+13/?wsdl
it provides several monitoring function, and also a "restart" one.
Also you can use the Visual Administrator to connect to a distant server, and reboot from here, also a SAP MMC can be used to reference differents servers.
Fabien.
Edited by: Fabien REVOL on Sep 29, 2009 4:22 PM, reason: completion of the answer.

How to remotely manage a Mac not on my network?

I'd like to remotely manage a Mac over the Internet. Specifically my mother's iMac, so when she loses Dock icons or can't find her Address book or something I can fix it from my location in another state. Simple things, but trying to explain it over the phone is generally unsuccessful. We're both running Snow Leopard. I can set things up initially on her Mac in person, and then I need something that requires no effort on her end for this to work. Thanks.

As Sijmons suggests, TeamViewer.com might be the easiest solution (and is frequently my suggestion). This is a secure connection.
Some alternatives. You get 2 free AOL Instant Messenger (AIM) accounts. Setup your iChat client with one AIM account, and then setup your Mom's iChat client with the other. Then you can use iChat Screen Sharing, as long as your Mom is available to approve the Screen Sharing request. As a bonus, you can text, audio, or video chat with your Mom over iChat. An Audio chat while using Screen Sharing will allow you to talk her through things while you demonstrate or watch her and provide feedback and corrections.
LogMeIn.com can be used free for personal use (secure connections used), but it does not provide file transfers (you could use something like Dropbox or insync (from Google) to do file transfers.
You could setup a Hamachi VPN (virtual private network) between your Mom's and your Mac (Hamachi.com free for personal use). Once you have Hamachi setup, you could then just use Mac OS X Screen Sharing. This is a secure connection.
A more complex approach is setting up your Mom's home router to port forward port 5900 (see portforward.com), then get a free dynamic DNS name from a service such as No-IP.com or DynDNS.org, and run a dynamic DNS updating client available from the service you get the dynamic DNS name from. Now you can use Finder -> Go -> Connect to server... -> vnc://your.moms.dynamic.dns.name. And if you also port forward port 548, you can do file sharing via afp://your.moms.dynamic.dns.name (down side is that this approach is not as secure, and it opens well known ports that might be attacked).
And for the really hardcore, you can port forward port 22 (ssh) and then create secure ssh tunnels that you use for screen and file sharing across the Internet.

How to remotely control another mac

Similar Messages

Maybe you are looking for