How to remove a 3inch CD from the slot loading drive??

I have am external adapter for various IDE external devices. The drivers came on a 3 inch CD.I put the CD in the slot it did not appear to go all the in and it will not eject using the normal methods. Anyone run into this situation??
Bob

I was able to remove the disk quite simply. I slid a business card through the center of the slot. I aimed the card slightly upward toward the top of the drive. I inserted the card in about an inch and a half. I then took a mediun size paper clip and straightened it out. I bent the last millimeter down about one millimeter forming sort of a hook. I then inserted the hook end in about an inch and a half on top of the business card (away from the drive mechanism).I then rotated the paperclip so that the hook end dropped into the hole in the CD. I then slid the paper clip, the the business card and the CD out together It worked great first try. The drive still works.
Bob

Similar Messages

HT2285 How to remove a mini-cd from a slot-loading superdrive (on ibook intel)

I have a mini cd stuck in the slot loading drive on my ibook (i have curious children;-).
Are there any tricks to removing foreign objects like this?
Thank you.

Hello,
You really only have two options.
Take the unit apart yourself or you take it to a repair shop to do it for you.
If you wish to attempt it yourself, you can use the iFixit guide to help you.
It wont eject, as the leaver which pulls the disk out of the drive, wont move further enough to eject the disk.
So the the only way is to take to top off the drive and then you can simply remove it out.
Best of luck

How to remove my credit card from the App Store

How to remove my credit card from the App Store

I used a pre-loaded credit card so when it ran out i had problems, primarily because it wont let me download or update anything until the "billing problem with the last transaction" was resolved. I dont really care if the purchase goes through but i want to be able to update stuff again and it wont give me the option to select 'none' under payment type. do i have to put another card on there just so i can "resolve the billing problem" and then i have to take it off again or is there a way around this or is it a never ending cycle?

Any ideas on how to remove a small scratch from the screen or whether it is covered by apple?

Any ideas on how to remove a small scratch from the screen or whether it is covered by apple?

Call Apple Care and ask them if your computer is still under warranty.

HT3702 How to remove my credit card from the iPod

I want to remove my credit card from the app store

On an iOS device go to Settings>Store>Apple ID>View Apple ID>Payment Information>None.
If "None" is not an option, you may want to contact iTunes support:
http://www.apple.com/support/itunes/contact/

How to remove a static class from the Runtime of the JVM

I want to remove a static class from the Runtime of the JVM.
My goal is to clear the cache of the "InetAddress.getByName(String host)" static method.
Thanks in advance.
Floweb

Sorry, It means a class that has been loaded in the JVM by the call to a static method......
Floweb

How to remove a Java instance from the config tools

Hi,
I would like to remove a java instance from the config tool since that server does not exist anymore. Is there a way?
Please le me know.
Thanks
Jean

Jean,
I think you can do this if you remove the entries of your Instance from instance.properties file located under the below path.Take a backup of the file first then do the changes and Restart the server once done.
/usr/sap/SID/JCInstanceno/j2ee/cluster/instance.properties
Hope this helps.

How to Remove Jar File name from the screen of nokia 40 series

hi
i have the problem with running midlet.
the jar file jame is always visible on the screen, how to remove that ?

>
Prasanna Kumar wrote:
> Hi ALL
>
> I am using file adapter and I what to create file name dynamically by acesssing PO number and time stamp from the payload using variable substution.
> But the problem is I am getting ":" in time stamp field value and it is not acceptable for file name .
> So could you please tell me a way that I can remove this ":" from that particular field value and create the file name dynamically.
>
> Note 1)Add Time stamp option will not help me as we require a time stamp of particular zone.
> 2) Dynamic Configuration code is also not use full as I am using 1:n file creation
does the time stamp with the ":" a part of your output file?
else use a replaceAll function in your mapping and replace the : with empty string then use the value in the variable substitution
Another option is use the normal BPM for 1: N message flow. The use a simple java mapping that will introduce a dynamic configuration and you can create the file name as you want. the java mapping will be used in the flow of messages from BPM to target system.
ref: /people/shabarish.vijayakumar/blog/2009/03/26/dynamic-configuration-vs-variable-substitution--the-ultimate-battle-for-the-file-name

How to remove links to adobe from the image viewer

On my site I need to display lots of pictures. I used the
image viewer flash element from the `insert`-`media` tabs.
Everything works great, but the first few pics in the
slideshow are clickable, and link to the adobe home page. How could
I remove the links and make the pics not clickable. I already went
into the flash element properties window and made the `image links`
and `image link targets` blank. I don`t know what else to try.
Please help!
thank you: Tibor

It's only necessary to post once. No answer usually means
that nobody knows
the answer....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"serestibi" <[email protected]> wrote in
message
news:frm8qo$26v$[email protected]..
> On my site I need to display lots of pictures. I used
the image viewer
> flash
> element from the `insert`-`media` tabs.
> Everything works great, but the first few pics in the
slideshow are
> clickable,
> and link to the adobe home page. How could I remove the
links and make the
> pics
> not clickable. I already went into the flash element
properties window and
> made
> the `image links` and `image link targets` blank. I
don`t know what else
> to
> try. Please help!
> thank you: Tibor
>
>

How to remove a Sharepoint list from the Powerpoint app on iPads??

Hello,
I have added a Sharepoint "place" in Powerpoint app on an iPad and cannot find a way to remove it, the address of the SharePoint page/place/list has been changed so it is no longer relevant to me. Any tips?

Hello Scott,
I did post a question but for some reason it didn't post. What I typed was removed for some reason. So I'm trying again. I'll keep trying until it posts. I had installed a 3rd party sound editor program which added a sound device to the list with Mic and line in. It's also in the output list. All I need to do is remove the device and then AU will allow me to select line in as an input device. Right now AU is confused by the extra device and wont let me select an input device. AU is a developer app. But that's not the problem. The problem is removing the device from the list of sound devices.
If someone knows where this device might be and how to remove it, please let me know.
Thanks,
Dave

How to remove (delete) FB contacts from the contact list.

I'm really new to my new Mac and having a bit of trouble trying to delete all the contacts that were downloaded to my contact list from Facebook. I have tried highlighting one and deleting it that way, but, the 'Remove from Group' doesn't light up.
I tried putting them in a particular group, such as FB contacts, then deleting that group. But, they still remain in the group titles 'All on My Mac'. How do I get them deleted from that group??

To turn off Facebook contacts:
1) Go to Contacts
2) Click Group on the top
3) Uncheck All Facebook
Then you shuold just see your regular contacts.
Good luck.
Mr Bill

How to remove only one row from the database using labview6.1

using labview 6.1 I create a table with various rows and columns and store bulk of data's in them.,, what procedure should I follow to remove only one paticular row from the database? Help me out with an example please,,
Thanking you in advance!

Hi,
If you have the database toolkit you can delete a row using just a SQL Query to "DB Tools Execute Query.VI"
Example:
DELETE FROM Table name Where SerialNum='Value' And Date='Value' And Time='Value'
See also attached VI
Best Regards
Johan
Attachments:
Delete_a_row_in_a_database_table.vi ‏48 KB

How do i remove a mini cd from the slot drive in mac book pro?, how do i remove a mini cd from the slot drive in mac book pro?

i have put a mini cd into the slot drive and cannot get it out. how would i get it out?

Tilt the MBP up, slot facing down and see if the cd slides out.
You may have to take the computer to the Apple store to have it removed.

How to Remove ZD7000 Antenna Wires from the Hole?

UPDATE: The Maintenance and Service Guide mentions that the antenna wires are attached to a card; that's why I cannot simply pull them out through the hole. There may be enough slack so that, for my purposes, I won't have to disconnect the wires.
I'm finding some issues with the step-by-step instructions that I referenced below.
BB
Hi,
I'm disassembling my ZD7000 laptop to replace the DC power jack. I started following the steps at http://www.ifixit.com/Guide/Repairing+HP+Pavilion+ZD7000+Motherboard/2878/1.
Everything went well until I got to Step 14, where I'm instructed to "Disconnect the 2 wires connecting the monitor to the rest of the laptop." In the picture, the antenna wire is one of the two wires highlighted with a red box. (Although the picture is somewhat confusing, because it shows a hand touching a third wire that is not highlighted.)
The HP Service & Maintenance Manual says, "Remove the 2 antenna cables from the hole and routing channel in the top cover." Since they are antenna wires, I assumed I could simply pull them out through the hole. However, I gave up after exerting as much pull pressure as I dared, which was a lot.
Am I missing something? I suppose I could cut the antenna wires and resolder them during reassembly.
Any suggestions would be greatly appreciated.
Thanks,
Bill
This question was solved.
View Solution.

As indicated in my update, this issue has been solved

How to remove a mini disc from the cd rom

how do you remove a mini disc that has been accidentally inserted into the CD Rom drive?

These two on YouTube, although meant for the SD card, might work.
http://www.youtube.com/watch?v=9fCUZo00I5E
http://www.youtube.com/watch?v=hpwDfpH4hR0

How to remove a 3inch CD from the slot loading drive??

Similar Messages

Maybe you are looking for