How to remove a boot camp partition of xp without disrupting a partition of windows 7

i have a mid 2010 macbook pro that has the following hard drive configuration
ds ~ mac os x
bootcamp ~ windows xp
untitled 1 ~ windows format
untitled 2 ~ windows format
windows 7 ~ windows 7
i want to get rid of the windows xp part without getting rid of the entire config, wiping the hard drive, and while retaining windows 7
any ideas i am open to anything?

Well you should first backup your data to a external drive and disconnect.
Next launch disk utility in the utilities folder and click on the internal media drive on the left and click parittion tab.
Normally you should be able to click on the bootcamp partition and click the little "-" sign and then click on the partition above it (the OS X partition) and there should be a corner draggie thing to extend to cover the deleted second parittion, then click apply.
You can only delete and extend down, not up, and you can't move data, just delete with along with the partition.
If it doesn't work, well you know what you got to do.
https://discussions.apple.com/message/16276201#16276201

Similar Messages

HT3986 how do you enlarge boot camp partition after windows is installed

how do you enlarge boot camp partition after windows is installed

Welcome to the Apple Support Communities
You can do it with third-party programs, but I don't recommend it because you can damage the hard drive. The best way to do it is to delete your Windows volume and create it again with the size you need

External USB Hard Drive Can't Be Safely Removed After Boot Camp 3.1 Install

I just wanted to report that I've done multiple installs of Windows 7 Ultimate 64-bit on my MacBook 4,1 and although I've had no problem using the cmd workaround ( http://www.zath.co.uk/how-to-install-windows-7-on-apple-mac-boot-camp/ ) to install the 64-bit Boot Camp drivers that come with the Mac OS X 10.6 Snow Leopard retail DVD, I have found that by installing the Boot Camp 3.1 drivers on the same system, under no circumstance can I click the the "Safely Remove Hardware" icon in the system tray and not receive a message saying that ... "The device 'Generic Volume' cannot be safely ejected..." and that some program or service must be using it. However, a restart doesn't solve the problem any more than logging out does.
I read somewhere that part of the fix that Boot Camp 3.1 was intended to provide was to allow safe ejecting of the Macintosh HFS+ partition. Well, my external hard drive has three partitions: one NTFS, another NTFS, and a third HFS+ for Time Machine backups. I suspect, since I haven't seen anyone else reporting this issue, that it may simply be that the Boot Camp 3.1 drivers don't take into account the possibility of an HFS+ partition on external USB devices. Anyway, a System Restore to before Boot Camp 3.1 drivers were installed completely remedies the issue.
At this point, I'm not having any trackpad issues or anything else of note with respect to the original Boot Camp 3.0 drivers that came with the Snow Leopard retail disc, so I'm fine keeping those drivers installed and allowing Windows Update to update the Intel and Marvell drivers as it recommends. I just find it slightly amusing that the Boot Camp 3.0 drivers, which supposedly did not support Windows 7 (let alone the 64-bit version) work better than the 3.1 drivers which do supposedly support Windows 7. And the funny thing (or is it?) is that you have to install the original Boot Camp drivers with the cmd workaround before you're even able to update to the Boot Camp 3.1 drivers. Hilarious stuff there.
Proprietary gamesmanship is a big reason some of us prefer the Linux "share the ownership +for free+" model of computing. Just saying...
Anyone have any proper solutions (as in, other than "don't install the updates then!")?
bkadoctaj

I have a pair of external usb drives, one formatted for NTFS and the other for HFS+ connected through an external 7 port hub. I am running Windows 7 (64 bit) with bootcamp 3.1 on a late 2009 Mac BookPro. I share the same "safely remove hardware" issues you described. I always assumed it was because my external drives were connected through my external USB hub because of a similar issue I had running Vista (64 bit), but now I can confirm directly connecting the external USB HFS+ drive also yields the same "safely remove hardware" problem. Unfortunately for me, if I regress to the Bootcamp 3.0 drivers, my audio drivers, at times, fails to load. I would need to regress to Windows Vista (64 bit), the last environment where my iSight camera, internal speakers and all other hardware performed correctly. I would gladly, at this point, live with the "safely remove hardware" issue in exchange for a working iSight camera, the one and only hardware device lost to me in the move to Windows 7.

HT5639 how do you uninstall boot camp partion after a failed install of windows 7

I cannot remove a boot camp partition after a failed attempt to install windows 7 64 bit

IS there an option to remove Windows in Bootcamp Assistant?

How can I activate Boot Camp Assistant?

How can I activate Boot Camp? I want to install an educational library that is on a CD. People that have PC's can use the CD. I have a mac mini and I want to open the CD to read/review. I have the Snow Leopard model.

Open Boot Camp Assistant in the Utilities folder. You will see the following:
Click on the Print Installation & Setup Guide button. Click the OK button in the dropdown panel. You will now see the main Print panel. You can now print the document to your printer. If you prefer to make a PDF file you can read on the computer instead, then select Save as PDF from the PDF dropdown menu on the lower left. Save it to the location of your choice.
Now, read this document carefully in order to follow the proper procedures for creating a Windows partition on your hard drive to which you can install Windows 7 from a retail Windows 7 installer DVD.
Other options for running Windows:
Windows on Intel Macs
There are presently several alternatives for running Windows on Intel Macs.
1. Install the Apple Boot Camp software. Purchase Windows XP w/Service Pak2, Vista, or Windows 7. Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows. Boot Camp enables you to boot the computer into OS X or Windows.
2. Parallels Desktop for Mac and Windows XP, Vista Business, Vista Ultimate, or Windows 7. Parallels is software virtualization that enables running Windows concurrently with OS X.
3. VM Fusionand Windows XP, Vista Business, Vista Ultimate, or Windows 7. VM Fusion is software virtualization that enables running Windows concurrently with OS X.
4. CrossOver which enables running many Windows applications without having to install Windows. The Windows applications can run concurrently with OS X.
5. VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris. It is not as fully developed for the Mac as Parallels and VM Fusion.
6. Last is Q. Q is a freeware emulator that is compatible with Intel Macs. It is much slower than the virtualization software, Parallels and VM Fusion.
Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion. Boot Camp is only available with Leopard or Snow Leopard. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

Can i just partition my HD by using boot camp 4.0.1 without install window?

Can i just partition my HD by using boot camp 4.0.1 without install windows?
cox i want to use rEFIt to boot up my pendrive to install windows.
Due to some reason the boot camp 4.0.1 cannnot detect my usb drive (that contained windows 7), so thats why i use the rEFIt to boot from my usb drive

Yes, you can.
Let the BootCamp Assistant just make the partition and do not click on "Install Windows"-button.
The result is a preformatted FAT32-partition on your Mac.
Stefan

How do i install boot camp on a brand new 3tb iMac osx 10.8.2

how do i install boot camp on a brand new 3tb iMac osx 10.8.2?

Note: At this time BootCamp doesn't support 3TB drives - this is due to a memory allocation issue with Windows. Check out this article on a/an (unreliable) work around. I say unreliable because some people are reporting success and others failure. At this time if you really need Windows it probably would be better to use virtualization software like Parallels, VMWare, or VirtualBox.

How can I upgrade Boot camp 3.0.4 on macbook pro (os x v10.6.8)?

How can I upgrade Boot camp 3.0.4 on macbook pro (os x v10.6.8)?

Apple Software Update in Windows or manually.
Recent updates:
Boot Camp Software Update 3.3 for Windows
Boot Camp Software Update 3.2 for Windows 64 bit
Boot Camp 3.2 Update for iMac (early 2011)
Boot Camp 3.2 Update for MacBook Pro (early 2011)
Boot Camp Software Update 3.2 for Windows 64 bit
Boot Camp 3.0, Mac OS X 10.6 FAQ
Installation Guide Instructions for all features and settings.
Boot Camp 4.0 FAQ Get answers to commonly asked Boot Camp questions.
Windows 7 FAQ Answers to commonly asked Windows 7 questions
http://www.apple.com/support/bootcamp/

How can I assign Boot Camp more GB?

How can I assign Boot Camp more GB?

The new Winclone 3.x $19
http://www.paragon-software.com/home/camptune/
both work

Apples update didn't work for me: Boot Camp: iMac displays a black screen during installation of Windows 7

Boot Camp: iMac displays a black screen during installation of Windows 7 - Apple Support
I have followed each of the steps listed in the link above with no success.
Prior to adding the extra drivers I was able to start the Windows install process up to reformatting the "Windows" Bootcamp drive. After that the computer would go through some instal processes and eventually restart. After the restart the screen would go black. The black screen lead me to the Apple Support link above dated March 5 2015. After going through steps listed in the link above, I get an error message stating that the D:\Sources\instal.win. file cannot be located. I am forced to restart the computer at that point and theWindows install process attempts to start again but always ends up at the same point.
Note: I am installing windows 7 Pro from a DVD. I scanned the AutoUnattend.xml file and noticed that it refers to "Windows 7 ULTIMATE" but not "Pro" or any others that I could see. (see below). Could that be part of the issue?
Any feedback would be greatly appreciated.
<cpi:offlineImage cpi:source="wim:d:/sources/install.wim#Windows 7 ULTIMATE" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
</unattend>
iMac (27-inch, Late 2009)
2.66 GHz Intel Core i5
16 GB 1067 MHz DDR3
ATI Radeon HD 4850 512 MB

Here is an over-simplified explanation of WIM and CLG files. Assume your DVD Media contains
W7- Ultimate
W7- Professional
W7- Home Premium
W7- Home Basic
WIM Files
File1
y
y
y
y
File2
y
y
y
y
File3
y
File4
y
y
File4
y
y
y
The File .wim will contains a compressed image which contains File [1...5].
The W7-Ultimate .clg will have 5 entries, with all set to 'Y'.
The W7-Professional .clg will have 5 entries, with 'Y','Y','N','Y','Y'.
The W7-Home Premium .clg will have 5 entries, with 'Y','Y','N','N','Y'.
The W7-Home Basic .clg file will have 5 entries, with 'Y','Y','N','N','N'.
This allows a single .wim Image file on the DVD media to be used to install any of the 5 flavors of Windows. When you enter your product key, the Installer knows what specific W7 variant you have the key for and will tell the WIM to extract the specific files the installer needs to be extracted.
The following line
<cpi:offlineImage cpi:source="wim:d:/sources/install.wim#Windows 7 ULTIMATE" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
is telling that a retail product key will be entered, which should go look for this specific .clg file (from the five you already have on disk). You can test if it will work for you by changing this line to the following
<cpi:offlineImage cpi:source="wim:d:/sources/install.wim#Windows 7 PROFESSIONAL" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
If it does not work, the other issue can be related to device discovery. Typically A: and B: device names are reserved for Floppy Drives. C: is your internal HDD.
D: can either point to the Optical drive, or the USB. The normal convention is that the removable media is named from Z: backwards. Y: and Z: are usually used for Network drives, so X: should be your USB. First try with the change to "Professional". If it does not work,

HT3986 This what my boot camp says , when ever i am trying to instal windows 7 ''There is no USB drive connected to the system. Please insert a USB drive to continue. "' Can someone help me . ?

This what my boot camp says , when ever i am trying to instal windows 7 ''There is no USB drive connected to the system. Please insert a USB drive to continue.

pump

How to remove "Ads by Media Player" using Chrome? Online solutions are for Windows

How to remove "Ads by Media Player" using Chrome? Online solutions are for Windows.
Having relentless pop up ads which open new browser windows. Searched all over for a Mac solution and can't seem to find one. Help please!?

http://www.adwaremedic.com/index.php
(Read the whole page to learn about adware!)

I have all my devices connected to iCloud. I would like a reduced contact list on my iPhone without removing any from my master list on my computer. How do I delete contact numbers from my phone without disrupting the master list on my computer?

I have all my devices connected to iCloud. I would like a reduced contact list on my iPhone without removing any from my master list on my computer. How do I delete contact numbers from my iphone without disrupting the master list on my computer?

Are you trying to reduce the visual clutter on the phone, save space on the phone, or limit the security exposure if your phone is stolen?
If you are only wanting to reduce the visual clutter and make scrolling through the list faster, you could set up a group on the computer containing only the contacts you want to see on my phone (called, for example, "Show on my Phone") and enable only that group inside Contacts on the phone. You might even have one or more existing groups that you could enable that way (maybe "Family" and "Personal").

How do I remove Boot Camp and go back to a single partition?

I originally used boot camp but recently installed Parallell. I didn't realize all my windows info was still in a separate drive. I am now just using Parallells but the boot camp is still out there. How can I remove those items and go back to the one partition
Thanks

Hi,
if your specs are uptodate and you are using OSX 10.4 Tiger, use these instructions: http://support.apple.com/kb/HT1309?viewlocale=en_US
For OSX 10.5 Leopard use these: http://docs.info.apple.com/article.html?path=Mac/10.5/en/15554.html
Regards
Stefan

How to back up Boot Camp and how to resize FAT partitions

I suppose someone has already addressed this topic herein, but in case someone needs help I am leaving with you what I learned.
I started with a partition sized to 18 gigs and installed Windows XP on it. Soon the drive became full after I installed software and various disc images so I can play games. I wanted to resize the partition to 28 gigs without losing my data, leaving 46 gigs on my Mac partition.
I was not sure what would work so I chose several methods of possible restoration. The easiest was to boot to the Mac and use Disk Utility to make a Disk Image of Boot Camp. The next precaution I took was to back up my settings with the Windows Files and Settings Wizard. Lastly, I booted to Mac and turned on viewing of hidden files. Then I copied all the files off the Windows XP partition onto an external drive. I also tried Acronis True Image while in Windows but it was not compatible.
I also discovered a free program called Winclone (http://www.tuaw.com) that makes an image of the Windows partition and restores it for you, much like Disk Utility works.
In OSX, I ran Boot Camp Assistant again to rejoin the partitions. Then I ran it again to partition the new drive to 28 gigs.
The first thing I tried to do was to use Winclone to restore the Winclone image. That failed with errors. Then I tried to use Disk Utility to restore the drive and Disk Utility would not allow me to restore the disk image onto the drive. I am not sure why Apple is so unsupportive of implementing their Disk Imaging technology within the context of their own self-created Boot Camp technology.
Anyway, the last thing I could try was to copy the files back onto the new partition or to give up and reinstall Windows and use Files and Settings Transfer Wizard to restore my Windows settings.
After partitioning the drive with Boot Camp Assistant, I copied the files over and rebooted. Windows said there was an unsupported drive. Then I realized that I missed a step in the installation instructions provided by Apple for Boot Camp. I forgot to format the drive again using the Windows XP install CD, that the Apple says is necessary.
So I booted up the Windows cd and erased the Boot Camp partition and made it a FAT drive so that I would be able to copy my files over to it from OSX, which I would not have been able to do had the drive been formatted as NTFS.
As XP started to install its software, and it started to copy files from the cd, I pressed the power button to shut down the Mac. (Do this at your own risk. I am warning you that this could damage your computer, so do NOT try this if you feel uneasy about it.)
I booted into OSX. Then I trashed the few files that Windows had started to install on the Boot Camp drive. Then I copied all my backup files back onto the partition.
Here is a widget that will allow you to view hidden files in OSX: http://www.apple.com/downloads/dashboard/developer/hiddenfiles.html
I rebooted the Mac and held down the Option key while restarting. When the Mac and Windows drives appeared at the startup screen, I selected Windows, which booted up successfully. It then recognized the partitioned drive as new hardware and required me to restart, which I did.
I wanted to convert my drive from a FAT drive to a NTFS-formatted drive.
This is how I did that:
http://technet.microsoft.com/en-us/library/bb456984(TechNet.10).aspx
After converting Boot Camp to NTFS file system I noticed an immediate speed increase in Windows XP. I
In conclusion, Disk Utility is a good method of backing up your partition, as it allows you to use a password to make a disk image of your drive. It also allows you to copy the files off the disk image onto the Windows partition. But it would be a lot simpler if Apple allowed them to use Disk Utility to restore the whole image back onto Boot Camp.
Other methodologies I did not get to explore because I am happy with my results:
http://forums.macosxhints.com/archive/index.php/t-71165.html
http://forums.macrumors.com/showthread.php?t=241035

After copying your files back to the Boot Camp partition you may get this error message when you boot up Windows XP. Notepad opens with this message "[.ShellClassInfo] LocalizedResourceName=@%SystemRoot%\System32\Shell32.dll,-21787". If this happens to you please see this article from Microsoft. I had to perform both Methods 1 and 2 to remove the messages. http://support.microsoft.com/kb/330132

How to remove a boot camp partition of xp without disrupting a partition of windows 7

Similar Messages

Maybe you are looking for