How to remove a "learned" word from the dictionary

Somehow I managed to add some mis-spelled words to my dictionary and I cannot figure out how to remove or edit these "learned" words.
Any help would be appreciated.

What version of Pages?
Peter

Similar Messages

How do I remove a learned spelling from safari dictionary

I inadvertently added an incorrect spelled word while using Safari and gmail in composing a message, how do I remove a learned spelling from the safari dictionary. I think it is in the safari dictionary because the word was underlines and not highlighted as gmail shows mispelled words.

Thank you, you got me on the right track. I found it in the following way.
Select USERS, User Name, Library, spelling, local dictionary i.e.
MACINTOSH HD/USERS/JJ/LIBRARY/SPELLING/LocalDictionary and open the LocalDictionary

How to remove my credit card from the App Store

How to remove my credit card from the App Store

I used a pre-loaded credit card so when it ran out i had problems, primarily because it wont let me download or update anything until the "billing problem with the last transaction" was resolved. I dont really care if the purchase goes through but i want to be able to update stuff again and it wont give me the option to select 'none' under payment type. do i have to put another card on there just so i can "resolve the billing problem" and then i have to take it off again or is there a way around this or is it a never ending cycle?

Any ideas on how to remove a small scratch from the screen or whether it is covered by apple?

Any ideas on how to remove a small scratch from the screen or whether it is covered by apple?

Call Apple Care and ask them if your computer is still under warranty.

How can I add a word to the dictionary?

How can I add a word to the dictionary on my iPhone 6 plus?
Thanks.

There's not an option to add a word to the dictionary. However, after typing that word several times, it will start to recognize it and offer it as a suggested word.

HT3702 How to remove my credit card from the iPod

I want to remove my credit card from the app store

On an iOS device go to Settings>Store>Apple ID>View Apple ID>Payment Information>None.
If "None" is not an option, you may want to contact iTunes support:
http://www.apple.com/support/itunes/contact/

How to remove a static class from the Runtime of the JVM

I want to remove a static class from the Runtime of the JVM.
My goal is to clear the cache of the "InetAddress.getByName(String host)" static method.
Thanks in advance.
Floweb

Sorry, It means a class that has been loaded in the JVM by the call to a static method......
Floweb

How to remove a Java instance from the config tools

Hi,
I would like to remove a java instance from the config tool since that server does not exist anymore. Is there a way?
Please le me know.
Thanks
Jean

Jean,
I think you can do this if you remove the entries of your Instance from instance.properties file located under the below path.Take a backup of the file first then do the changes and Restart the server once done.
/usr/sap/SID/JCInstanceno/j2ee/cluster/instance.properties
Hope this helps.

How to remove a word from the dictionary?

In the dictionary there are some words that aren't spelled correctly. I like to remove those words. Btw those words are not added by myself, but are already in the dictionary when I installed Firefox.
I'm using Firefox 6.0.1 (dutch version) and Windows XP.
The words I'm talking about are 'bakcupsysteem' and 'backcupsysteem'. The correct word has to be 'backupsysteem' which I've added already to the file persdict.dat.

What editor can I use for editing that file? Although I don't think I will edit that file because I see a lot of english words in that dutch(!) dictionary... I mean what is a word like "cupboard" doing in that file... And what will happen with the dictionary when I update Firefox?
Thanks for your help. I think I just have to stick with incorrect spelled words and I just have to add the correct word(s).

How to Remove Jar File name from the screen of nokia 40 series

hi
i have the problem with running midlet.
the jar file jame is always visible on the screen, how to remove that ?

>
Prasanna Kumar wrote:
> Hi ALL
>
> I am using file adapter and I what to create file name dynamically by acesssing PO number and time stamp from the payload using variable substution.
> But the problem is I am getting ":" in time stamp field value and it is not acceptable for file name .
> So could you please tell me a way that I can remove this ":" from that particular field value and create the file name dynamically.
>
> Note 1)Add Time stamp option will not help me as we require a time stamp of particular zone.
> 2) Dynamic Configuration code is also not use full as I am using 1:n file creation
does the time stamp with the ":" a part of your output file?
else use a replaceAll function in your mapping and replace the : with empty string then use the value in the variable substitution
Another option is use the normal BPM for 1: N message flow. The use a simple java mapping that will introduce a dynamic configuration and you can create the file name as you want. the java mapping will be used in the flow of messages from BPM to target system.
ref: /people/shabarish.vijayakumar/blog/2009/03/26/dynamic-configuration-vs-variable-substitution--the-ultimate-battle-for-the-file-name

How can I monitor Status word From the other side of the GPIB bus

I develop Thermal system control that should be operate thru the GPIB IEE 488.2 bus , my instrument application already written in Visual Basic ,The system knowes to do basic operation such as SETPOINT ,AIRDUT , BEGIN , STOP and more but I have do a problem , any time that I capture command from the controller the status word stuck at listener mode and I can not send another command again because my loop is waiting for the other side (the controller ) to tallk by monitor the IBSTA word .
There is anyway to reset ,clear ,initialize STATUS word again to his default value ?
Note : I am using VB 6 , the Samples that you have here for Non-controller is good so far if I want to send and recive data manualy (c
omputer to computer)
What if I have A system that work and always waiting for capture command and do somthing ?
I will be very greatful if anyone can help me , send me sample code for Status checking loop.
MIKI-AVI

Hello Miki-Avi,
I'm having a little bit of trouble understanding what you're trying to do. It seems that you have an instrument application that you have written and works in some instances but gets into an infinite loop in other cases. I think that your loop is waiting for something in the Status byte to change, and you're wondering how you can get it to change.
I'm not sure what bit you're waiting for, but I would assume that it is the LACS bit 2. You do not want to simply reset the IBSTA byte because this byte tells you what is happening on the GPIB interface. So, if you're waiting for the LACS bit to change, then you are waiting for the board to be addressed as a listener. Your controller would address the non-controller as a listener once you sent it da
ta with an IBDEV and an IBWRT call.
If you are looking for code for a status checking loop, check the following resources. Remember that you must call ibwait 0 to update your IBSTA byte. The 488.2 Function Reference is very useful in figuring out what you need to do.
http://venus.ni.com/stage/we/niepd_web_display.DISPLAY_EPD4?p_guid=B45EACE3EF8D56A4E034080020E74861&p_node=DZ52353&p_submitted=N&p_rank=&p_answer=&p_source=Internal
http://ae.natinst.com/operations/ae/public.nsf/fca7838c4500dc10862567a100753500/9cc0939663f1c5de862565d70082e89e?OpenDocument
Please let me know if you need more assistance.
Scott B.
National Instruments
Applications Engineer

How to remove links to adobe from the image viewer

On my site I need to display lots of pictures. I used the
image viewer flash element from the `insert`-`media` tabs.
Everything works great, but the first few pics in the
slideshow are clickable, and link to the adobe home page. How could
I remove the links and make the pics not clickable. I already went
into the flash element properties window and made the `image links`
and `image link targets` blank. I don`t know what else to try.
Please help!
thank you: Tibor

It's only necessary to post once. No answer usually means
that nobody knows
the answer....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"serestibi" <[email protected]> wrote in
message
news:frm8qo$26v$[email protected]..
> On my site I need to display lots of pictures. I used
the image viewer
> flash
> element from the `insert`-`media` tabs.
> Everything works great, but the first few pics in the
slideshow are
> clickable,
> and link to the adobe home page. How could I remove the
links and make the
> pics
> not clickable. I already went into the flash element
properties window and
> made
> the `image links` and `image link targets` blank. I
don`t know what else
> to
> try. Please help!
> thank you: Tibor
>
>

How to remove a Sharepoint list from the Powerpoint app on iPads??

Hello,
I have added a Sharepoint "place" in Powerpoint app on an iPad and cannot find a way to remove it, the address of the SharePoint page/place/list has been changed so it is no longer relevant to me. Any tips?

Hello Scott,
I did post a question but for some reason it didn't post. What I typed was removed for some reason. So I'm trying again. I'll keep trying until it posts. I had installed a 3rd party sound editor program which added a sound device to the list with Mic and line in. It's also in the output list. All I need to do is remove the device and then AU will allow me to select line in as an input device. Right now AU is confused by the extra device and wont let me select an input device. AU is a developer app. But that's not the problem. The problem is removing the device from the list of sound devices.
If someone knows where this device might be and how to remove it, please let me know.
Thanks,
Dave

How to remove (delete) FB contacts from the contact list.

I'm really new to my new Mac and having a bit of trouble trying to delete all the contacts that were downloaded to my contact list from Facebook. I have tried highlighting one and deleting it that way, but, the 'Remove from Group' doesn't light up.
I tried putting them in a particular group, such as FB contacts, then deleting that group. But, they still remain in the group titles 'All on My Mac'. How do I get them deleted from that group??

To turn off Facebook contacts:
1) Go to Contacts
2) Click Group on the top
3) Uncheck All Facebook
Then you shuold just see your regular contacts.
Good luck.
Mr Bill

How to remove a 3inch CD from the slot loading drive??

I have am external adapter for various IDE external devices. The drivers came on a 3 inch CD.I put the CD in the slot it did not appear to go all the in and it will not eject using the normal methods. Anyone run into this situation??
Bob

I was able to remove the disk quite simply. I slid a business card through the center of the slot. I aimed the card slightly upward toward the top of the drive. I inserted the card in about an inch and a half. I then took a mediun size paper clip and straightened it out. I bent the last millimeter down about one millimeter forming sort of a hook. I then inserted the hook end in about an inch and a half on top of the business card (away from the drive mechanism).I then rotated the paperclip so that the hook end dropped into the hole in the CD. I then slid the paper clip, the the business card and the CD out together It worked great first try. The drive still works.
Bob

How to remove a "learned" word from the dictionary

Similar Messages

Maybe you are looking for