How to remove a mapped drive

Hi all,
i created a mapping in my iMac pointing to a folder on my notebook with windows.
When I start Parallels to run a Windows VM and my notebook is not connected to the lan, the system stays popping up a message saying "The connection fails, maybe the server Notebook doesn't exists or blablabla...".
I would like to know how to remove this mapping because it doesn't appear on my Mac Desktop if my notebbok is connected to the lan, but when using Parallels, is almost impossible to work with the message popping up all the time.
TIA,
Alano.

The drive doesn't appear on the list...
That's the problem...I don't know where should I go to exclude this configuration...

Similar Messages

  • How to remove a hard drive on a Digital HiNote Ultra CT475

    I have an old HiNote Ultra CT475, that I need to remove the hard drive and have destroyed. Anyone know how to get the case off with destroying it? I have the front edge up, cause I found screws under the foot pad in front. I do not see any more screws except on the back and they have all been remove.

    Sorry it is made by DEC electronics, now out of business, we only help with HP products.

  • How to remove a mounted drive at startup in a mobile account, using netinfo

    How does one remove an mounted drive at startup in a mobile account, using netinfo?
    One of the user automatically mounts a network drive on her new intel Macbook in her portable account. Trouble is that the network drive is only available on the intranet. So when she is on the road, it take the Macbook very long 3-4 minutes before it let's her log in.
    Simply I thought to remove the drive on her macbook through the system preferences -> account -> login items. However the "login Item" GUI is very slow to respond and if it respond it does not let me remove the network drive. I tried this both on the intranet and off the network.
    I tried to remove the mounted drive at start up through the workgroup manager, but it does not show up there.
    So I thought that I try to use netinfo on the local machine. But I can't find where mounting info is stored in a mobile account. I thought it would be in the local @ localhost or should I connect to an other DB?

    The login items are not stored in Netinfo, they are stored in loginwindow.plist in the users Library/Preferences. You can either remove the entries for the server or simply trash that file and let a default one get recreated.

  • Satellite Pro 4260: How to remove the DVD drive?

    I have a Satellite Pro 4260 and it appears that the DVD drive is broken and I want to replace it. I cannot figure out how to remove the old one.
    Does anyone know how? Is there a manual available showing how?
    Thanks

    Hi
    This notebook is not know to me but a checked some sites in the net and it seems that the top cover must be removed.
    Then lift up the CD-ROM/DVD-ROM drive to disconnect PJ700 on the CD-ROM/DVD board from PJ15 on the system board.
    Remove two screws securing the CD-ROM/DVD-ROM connector board.
    Separate the CD-ROM/DVD-ROM connector board and CD-ROM/DVD-ROM connector brace from the CD-ROM/DVD-ROM drive
    Well, I think its not easy for someone with no experience.
    Therefore if you dont know how to do it and you have no much experience you should ask someone how knows what to do ;)

  • How to remove dvd/cd drive unit on my hp 2000

    I can not determine how to change out the dvd/cd burner on my HP 2000 365DX laptop.
    This question was solved.
    View Solution.

    Hi,
    You can find the procedure for removing the optical drive starting on Page 48 of your Maintenance & Service Guide.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • How to remove an external drive from time machine backup

    In time machine I also backup to an external drive. I recently bought a new external drive and thats working fine. However, it still wants to backup to my previous drive which I dont want to use. In time machine preferences I see the old and new drive listed. Both are greyed out so I cannot deselect the older drive.
    Suggestions?

    mhattonmd wrote:
    So when I open time machine preferences I see time machine and both external drives listed. If I click on options I see both external drives but I cant select either as they are both greyed out.
    If you see them both listed on the initial screen of TM prefs, they are both selected as backup drives. They are not being backed up. They are being used by Time Machine as a destination. You need to use “Select Disk…” to remove the external drives from the destination drives. Select Disk does not choose the drives you want to back up. It chooses the drives you wan to back up to.

  • How to remove/install hard drive?

    Hi,
    Does anyone know how to remove a hard disk from the 15" 1.67ghz Powerbook? I can't find instructions anywhere. If anyone can point me to a service manual or something similar I would be most greatful.
    I know this voids warranty, it doesn't matter, as it's not relevant in this case.

    Check out the PowerBook fix it guides…
    http://www.pbfixit.com/Guide/54.0.0.html

  • N97 how to remove ovi maps to get memory free

    My phone always says not enough memory.
    Because the OVI maps cost a lot of money when i am outside my country even when i use offline.
    I decided to remove ovi maps complete to to get memory free.
    So first i removed NOKIA MAPS and OVI Maps Wi-Fi/Network from application manager , installed maps.
    But unfortunately OVI Maps is still on my phone.
    So I tried to remove it from the menu with Optione Organize. But the delete will not show up.
    Can anyone help so i get some memory free ?
    With Kind Regards,
    dikTrom

    diktrom wrote:
    My phone always says not enough memory.
    Because the OVI maps cost a lot of money when i am outside my country even when i use offline.
    I decided to remove ovi maps complete to to get memory free.
    Whats the real issue ? Do you want to regain Memory really or ONLY because OVI Maps cost lot of money (???) . Because with proper settings OVI Maps will be totally FREE anywhere in the world.. Refer this ..
    Maps should be pre-installed and set to Offline mode. Use only Integrated GPS Positioning method... and there should not be any cost incurred...
    Attachments:
    Free Navigation.png ‏402 KB

  • How to remove stuck optical drive carrier

    I'm in the process of replacing a worn out Optical Drive in my 2007 Mac Pro Tower. When I got to the 'remove the optical drive carrier,' the stinker comes out about 3/4 inch and then no further. I don't want to force it of course. Anyone else ever have the same problem?

    I posted same question, got no answer so found a solution? for Mac Pro 3.1  early 2008 version.
    This only can be done if you have 2 super? drive bays with lower unoccupied.
    In my case it did not move at all in attempt to pull it out - in fact it is stuck on two screws that act as posts and are in slots in the bottom side of aluminum tray that it is supposed to slide out from. You don't see these until you get it out. 
    In your case with 3/4" opening, first try pulling one side then other, rocking, prying, a small crow bar. Try harder.
    no, not the jack hammer.
    Failing all else,
    1) lay the computer - open side panel down - on the floor. 
    2) slide the lower unoccupied DVD tray open with your finger and insert a blunt object (I used big old blunt screw driver) into the opening aimed down towards the floor. When you apply force to the inserted object, it is in the direction that enclosure must be pulled to get it out normally and on the side where it is stuck. You may have to strike the object, as I did, before enclosure will come free.

  • How to remove a duplicate driver?

    i have a Leybold 23xxxx pressure meter. By accident there are two Leybold 23xxxx drivers in the system now and i get strange errors with my VIs.
    I have installed one driver via LV (this is a very old version)
    and there is another (newer)  Version i dont know where it came from and why NI did not install the latest version.
    How can i remove the unused drivers?
    There is a old unused 2009 LV version still installed, but i could not find a uninstaller. Will i have to remove it with some tricks, or can it stay?
    ================================
    system: Win7 and debian stable
    Solved!
    Go to Solution.

    Instrument drivers are in the "LabVIEW\instr.lib" folder. Each driver should be in its own folder. To delete it, just delete the folder. You may need to update the palette menu to reflect the removal of the directory.
    Also, what do you mean by NI installing the driver? Are you referring to using the Help -> Find Instrument Driver? If so, what did you enter in the search criteria? Leybold isn't even in the list of manufacturers.

  • How to remove serial port driver

    Hi,
    I am developing test driver for serial port. I can't able to remove existing driver (su) from solaris 8.
    I tried "rem_drv su" and rebooted system. system does not came up again and generates panic (core dump). Could anybody help me regarding this problem.
    Thanks in advance,
    -Mahantesh

    Instrument drivers are in the "LabVIEW\instr.lib" folder. Each driver should be in its own folder. To delete it, just delete the folder. You may need to update the palette menu to reflect the removal of the directory.
    Also, what do you mean by NI installing the driver? Are you referring to using the Help -> Find Instrument Driver? If so, what did you enter in the search criteria? Leybold isn't even in the list of manufacturers.

  • Time Machine, how to remove dead external drive ?

    When an external drive started behaving irrationally, I transferred all video projects to a new drive. Now I noticed that this no longer existing old drive with all its 242GB contents still appears on my TM backups.
    Is there a way to remove it in order to free badly needed space on the TM?

    No, you need to use the Time Machine interface, not the Finder.
    See #12 in the Frequently Asked Questions *User Tip,* also at the top of this forum.

  • How to remove a Mapping Template from a mapping

    Hi,
    I used a mapping template to map some of my fields and since I applied it I get some strange behavior in the editor.
    I try to use the "Display Queue" option on a simple one-to-one mapping and I get a blank message from the editor.
    The "Processing Log" windows pops up but it is always empty. The "Display Queue" dialog also shows as empty.
    I delete the mapping template but I still get the same behavior.
    SAP PI 7.1 EHP1
    Thanks,
    Martin

    Problem with empty context.

  • How to remove / replace Tape Drives from SUN StorEdge L1000 ? Need document

    I have the User's guide but it does not provide any info. My sunsolve access does not allow me to see anything. Is there somewhere I can find this information ? Thank you

    you have the users guide and have looked at page 27?
    http://dlc.sun.com/pdf/805-4823-10/805-4823-10.pdf
    seems kinda easy... unless you can't open the doors...
    you might try this page...
    http://www.sunshack.org/data/sh/2.1/infoserver.central/data/syshbk/Systems/L1000/docs.html
    keep trying..
    haroldkarl

  • How to remove a stuck hard drive

    I have ssd drive in ablack MacBook that I won't slide out.  Any tips on how to remove the hard drive?

    You have to open the case of the computer, get to where the hard drive is, remove the screws and the drive will just pull out

Maybe you are looking for