How to remove a number format mask ?

I have to import some data form excel sheet. but the number in that sheet have been saveed as the following format mask 1,000.000(2,000.000,1,5000,00) as charchter
but in may table that field is a number, so how can remove the format mask from the excelsheet?
Thanks

846640 wrote:
I have to import some data form excel sheet. but the number in that sheet have been saveed as the following format mask 1,000.000(2,000.000,1,5000,00) as charchterI am wonder how to apply format mask in excel for the character cell.
but in may table that field is a number, so how can remove the format mask from the excelsheet?So, while reading from excel how the values is coming in the variable i assume its coming with comma(,) than what happens if you try like below?
variable_name:=TO_NUMBER(REPLACE(variable_name,',',''));
-Ammad

Similar Messages

  • How to ignore/remove number format mask ?

    Hi
    I have to import some numbers from the excel sheet, and that number has been saved along with the format mask like (9,999.99) (2,000.00,1,500,00,......)
    but that field in my table is a number filed and i have to equal that number with the number that exist in my table
    i have write that relation like
    mytable.filed1=to_number('excel_filed',9,999.000)
    but I does not work
    So what the solution for that
    Thank you

    Double post. See How to remove a number format mask ?

  • Portal Form: Number Format Mask Accepted Values

    Hi, i'm trying to format the way numbers are displayed in our forms, specifically instead of 50,000.00 we want 50,000 - without the .00.
    I cannot find anything on format masks in the portal documentation, and the standard oracle masks I have looked up such as "NNNN" etc don't seem to be supported.
    Trial and error has yielded a mask of : 99,999,999 which does get rid of the decimal, but introduces a problem where if the value is smaller than the mask it is shifted into the middle of the field (leading spaces are being added for every missing unit that is specified in the mask), but obviously if a smaller mask definition is used then larger numbers appear as ###### which is worse than the leading zero problem.
    Where in the documentation can I find the accepted forms of numerical number format masks for use in portal forms?
    Thanks..

    Let me know if you find a solution to this. I even asked my Oracle instructor and she couldn't tell me how to setup a date format mask. This is what she gave me which doesn't work, but I'm not saying I'm the quickest race car at the track. lol
    "Hi,
    Try the following format mask "("099")""-"099"-"0999. They have an example of this on page 7-12. I'm not sure if OTN may have a listing of any Forms format mask. Search under Forms Developer and see if you find anything.
    Take care,
    L"

  • How to remove srial number profile ?

    Hi sap Guru,
    my issue is how to remove serial Number profile in material master,
    a  material use all  plant ,only  one plant  serial number profile is on,
    ex- having  plant 1000,2000,3000,4000,5000,6000.
    plant 6000  serial number profile is on, having  five quantity with serial no and  the material already issue,
    how to remove serial number profile 6000 plant that material ,
    i try in material master remove serial  no profile but getting error serial number profile already assign
    How to remove serial no profile For plant 6000 ?
    2.
    in sto material sent delhi to bagalore ,
    available material is 10 in delhi store , when user sto that material geting error like
    only 0 ea of material available
    what might be problem ?
    regards
    shiv

    HI Shi,
    1) Material serial number removed procedure as follows.
    Using T-Code MM02-change  material code to the respective plant(6000),storage location,sales org and then give input data to the material view screen basic data1, basic data2...... In the view Plant data / Stor.2 input screen General plant parameters options Serial no.profile - '0001', SerLevel - '1' data to be removed during change/edit of the material. After that doing MIGO for the material serial number should not asked and also not displayed.
    Hope, it is useful for you.
    Regards,
    K.Rajendran.

  • How to apply a number format to a cell within a table in Word 2011??

    I am creating a fillable PDF form and I need to be able to apply a phone number format to a cell in Word 2011 similar to how it is done in Excel...Can someone please HELP me? Thank You!

    846640 wrote:
    I have to import some data form excel sheet. but the number in that sheet have been saveed as the following format mask 1,000.000(2,000.000,1,5000,00) as charchterI am wonder how to apply format mask in excel for the character cell.
    but in may table that field is a number, so how can remove the format mask from the excelsheet?So, while reading from excel how the values is coming in the variable i assume its coming with comma(,) than what happens if you try like below?
    variable_name:=TO_NUMBER(REPLACE(variable_name,',',''));
    -Ammad

  • Applying date and number format mask

    I have specified a date format for an attribute and a number format for another attribute of an entity object using Entity Object Editor - Control hints for the attributes.
    The date format is:
    Format type: Simple Date
    Format: dd.MM.yyyy
    The number format is:
    Format type: Currency
    Format: 0,000.00 km
    When using <c:out value="${bindings.MyDate}"></c:out> the format mask for the date is applied and it looks good, but when using
    <c:forEach var="Row" items="...">
    <c:out value="${Row.MyDate}"></c:out>
    </c:forEach>
    the format mask is not applied.
    When it comes to the number format it is not applied no matter what I use.
    I have tried setting the format for the view object attributes as well but the result is the same. How do I make this work?

    Can it have something to do with <html:form> ? Since it works using <c:out value="${bindings.MyDate}"></c:out> inside a html:form.

  • Civil Identity Number Format Mask

    Dears,
    I Need to change the Format Mask for the Civil Identity Number In The People Enter And Maintain Form
    Any Idea How Can I Do That ?
    Thanks in Advance.
    BR,

    Thanks. I did an "on submit and before computation" process that did a SQL replace on the page item. The DML process then successfully inserted the value into the database.
    Alex.

  • Number format mask of text item is not applied

    Hello all,
    I want to format a number like 999G999G999G999G990D00
    Is specify the format mask under source of the item. But it is not applied and I don't understand why.
    See http://apex.oracle.com/pls/otn/f?p=53873:2 for example
    Btw. is it possible to set the format for all numbers in the application at once? I want to have a thousand separator in most cases.
    Message was edited by:
    Jacob_B

    Hello Jacob,
    Btw. is it possible to set the format for all numbers
    in the application at once? I want to have a thousand
    separator in most cases.I am using substitution strings for things like that. You can define some "global" substitution strings on page application definition.
    So you just have to put in the format (999G999G999G999G990D00 ) in there once and give it a name. Let's say NUMBER_THOUSAND.
    Afterwards you can reference it wherever you need the format e.g. this way:
    to_char(10000,'&NUMBER_THOUSAND.').
    This way you just have one place where to change the format model.
    Regards,
    Tine

  • APEX cannot accept any other number format mask except 999G999G999G999G990?

    Hi, guys:
    Can anyone help me on this problem? I have a report with a column of number type, but I want to use accounting format mask such as <1234.56>, however. whenever I choose any other format model for this number column, I got the error message as "ORA-01481: invalid number format model", I can only choose Numeric format mask: 999G999G999G999G990
    Anyone could give me a hint on this? I am using APEX 4.1 and Oracle 11G R2. Here is my query for report
    select uh.descr, inv6.userkey, inv6.invno, inv6.amt-pa_temp.Subtotal_Payment over_short_amount
    from
    (select pa6.invoicekey, sum(pa6.amt) Subtotal_Payment
    from payments pa6
    where trunc(pa6.pmtdate)<=to_date(:P55_DP_VPF_PROD_DATE,'DD-MON-YY')
    and pa6.type not in (5)
    and pa6.invoicekey in (select pa5.invoicekey
    from payments pa5
    where trunc(pa5.pmtdate)=to_date(:P55_DP_VPF_PROD_DATE,'DD-MON-YY')
    and pa5.type=2
    group by pa6.invoicekey) pa_temp, invoices inv6, userhdr uh
    where inv6.userkey=uh.userkey
    and pa_temp.invoicekey=inv6.invoicekey
    and pa_temp.Subtotal_Payment<>inv6.amt
    and abs(inv6.amt-pa_temp.Subtotal_Payment)>1000
    order by 1Thanks a lot!
    Sam

    I found the cause. Thanks!

  • Number Format Mask error

    If i am providing format mask is 9 and providing value as 5, then i am getting output as " 5", means a white space padded just before the output. so can any body inform me is this a forms 6i bug, or the output is something like this only.
    A white space is padding just before the output for any Format Mask.

    what is the maximum lenght of the value?
    select max(length(MODEBA))
      from POLK_A_CT
    SQL> with POLK_A_CT as
      2  (select '123' MODEBA from dual
      3   union all
      4   select '456' MODEBA from dual
      5   union all
      6   select '0987' MODEBA from dual)
      7  select to_number(MODEBA,'999') MODEBA
      8    from POLK_A_CT;
    ERROR:
    ORA-01722: invalid number
    no rows selected
    SQL> with POLK_A_CT as
      2  (select '123' MODEBA from dual
      3   union all
      4   select '456' MODEBA from dual
      5   union all
      6   select '0987' MODEBA from dual)
      7  select to_number(MODEBA,'099') MODEBA
      8    from POLK_A_CT;
    ERROR:
    ORA-01722: invalid number
    no rows selected
    SQL> with POLK_A_CT as
      2  (select '123' MODEBA from dual
      3   union all
      4   select '456' MODEBA from dual
      5   union all
      6   select '0987' MODEBA from dual)
      7  select lpad(MODEBA,3,'0') MODEBA
      8    from POLK_A_CT;
    MOD
    123
    456
    098
    SQL>

  • Number Format Mask in Forms

    Hi All,
    If I enter 99999 in the form it has to display 99,999.00.
    What is the format Mask that I have to use to make it dispaly in this way.
    Actually I tried 999,999,999.99 but this is leaving empty spaces...and If the number is bigger then It wont display that...
    Please advice.
    Thanks,
    Satish

    Once you have the number format, you can trim the left spaces.
      1* select to_char(99999,'99,999,999,999.00') result from dual
    sql > /
    RESULT
             99,999.00
    sql > select ltrim(to_char(99999,'99,999,999,999.00')) result from dual;
    RESULT
    99,999.00Thanks,
    Rajesh.

  • How to override the NUMBER format in BEX?

    Hi,
    I want to override the number formats in BEX queries (Excel).
    In the Query Designer -> Query Properties -> Value Display,
    or in 3.x: Query Properties -> Display -> Number Format,
    the setting "Display of +/- Signs" affects how the numeric values in Excel will be displayed. This setting seems to take effect after everything else is done.
    I can change any cell formatting (pattern, border, color, etc.) except the number format. I have tried redefining Styles, assign different styles to the Result Area, setting up a default template, even Visual Basic (Sub SAPBEXonRefresh), nothing works, my settings always get overwritten by the query setting.
    For example:
    I am trying to assign the Number Format "Accounting", with a "$" sign in the far left of the fields, to the amounts in my workbook.
    It should look like this: "$     (123,456.00)"
    The results: my settings are replaced by the format "Currency" with the "$" sign.
    "    ($123,456.00)"
    It must be due to that number format setting in the query designer.
    I was hoping the number format setting in the query designer could be switched off. But apparently it is not possible. Not even the "Adjust Formatting after Refreshing" setting affects this behavior. It always takes effect.
    Does anyone have any idea what could be done about it?
    Thank you,
    Vince

    OK, I think I have just found the answer to my own question...
    I had done something in the VB editor that created this whole problem. Now it is fixed and works as it should.
    Thanks anyway.

  • How to globally modify number formatting in Crystal Reports

    How do I globally modify the number formatting in Crystal Reports to NOT use the default which is “System Default Number Format”? The goal is to modify the number formatting to NOT contain commas. This modification should be global and should apply to any local account that will launch and use Crystal Reports on the server where it is installed. Can anyone help?

    Hi Raghavendra,
    For new reports, we have tried the setting you specified.  The question is, how can we force Crystal Reports to “keep” and “retain” the adjusted format globally every time users create a new report?
    Thank you!
    Ivy

  • How to remove the date format validation done by the UI

    Hi All,
    I am having a date field which is an input field for Dateof Birth. User can either select from the calendar or enter his own date. If the user enters invalid date format'(032342525') something like this, when we move to the next tab the column turns to Red and it displays a message saying that date is not a valid date. I wanted to validate that on Save instead of tab click.
    Can anyone of you tell me how can we remove this date format validation in Java Webdynpro.
    Thankyou for your time and consideration!
    Madhavi

    Thankyou for your reply. I cannot the change the date type to string bcas the users need date picker to select the date. The problem I am having is once the format is wrong and the UI validates, though the other fields are entered by the user the application returns error saying that the required field are not entered.
    And also I am having multiple containers in my view set and for all other error messages I am using a popup to display the messages and this only error is shown at the bottom of the page which the users does'nt like.
    Is there any way I can identify that format error occured before it throws on the UI screen??
    Regards,
    Madhavi

  • How to remove mobile number from apple account

    want to remove my number from my account cos i changed my number and no longer want it on there

    Try ITunes & go into your Account and update There..
    You can also Edit in Contacts...........

Maybe you are looking for

  • Very slow boot due to USB controller?

    Hi all, I bought your barebone MS-6251 with combo DVD-RW. (other params are pentium IV 2.8 GHz, 512 MB RAM, 120 GB HDD Seagate, NVIDIA GeForce FX 5200 Ultra). I already installed your LiveUpdate software. I was absolutely satisfied with this product

  • How do I sort clips in the Project panel library (bin) alphabetically by file name?

    Two questions: How do I sort clip thumbnails in the Project Panel library (bin) alphabetically by file name? How do I "select" a group of 25 consecutive clips on the time line to form a group without having to click on each individual clip one at a t

  • My browser on facebook only opens pictures small :/

    Normally when i clicked on pictures on www.facebook.com on my browser they would open normal size, big enough for me to see but now when i click on them they come up small and difficult to see. If i try and zoom in they go fuzzy so thats no good. Als

  • Cannot edit in CC 2014

    So I now have LR 5.5 and Photoshop CC 2014. In my case it opens CC 2014, but nothing shows -- no filename no image. open an unedited NEF -- nothing open an edited NEF -- same, also did not ask if I wanted to edit with LR edits applied, not sure if it

  • How do i get english version of orcal database ?

    My computer default language setting is chinese because lotz of my software needs. But I like my oracle to be english cuz im studyin in canada. Anyone know how to change the language setting of oracle without change my computer language setting ?