How to remove a resource from project team without data loss

I have a requirement that, the resource must be removed from a project team after getting DE-allocated from the project.
If i do so, the data of the resource for that project, i.e; actual hours per task filled by the resource gets deleted, which seems not correct. The report for such projects comes out wrong.
Is there any way to de-allocate the resource from the team while keeping all his data there in the project ?
The basic requirement is to restrict the manager to allocate a task to a team member who is not the part of project anymore.

Hi Abhishek,
If the resource has actual on the project, indeed it cannot be removed from the project team. It is just a matter of communicating with the project manager. Here is how the project manager should proceed.
Open the project in Project Pro
Open the "build team from enterprise" in the resource ribbon
Select on the left side (available resources) the new resource
Select on the right side (project resources) the deallocated resource
Click on "replace": you'll be prompted that the resource has actuals on the project and cannot be replaced and that only the remaining work will be assigned to the new resource.
Doing this, you'll keep the project history, but still the PM will be able to assign the deallocated resource. There is no way to prevent it, unless you deactivate the resource, but it will be at enterprise level, meaning for all projects.
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |

Similar Messages

  • How to remove a photo from a LRPublishedCollection without affecting the Publish Service?

    Hello guys!
    I would like to know if there is a way to remove a photo from a LRPublishedCollection without affecting the Publish Service. Basically I would like it to be removed from the collection but I don't want to be added to "Deleted Photos to Remove".
    Thanks a lot!
    Jordy.

    I don't know how to keep it from being put on the "Deleted Photos to Remove" list at least briefly, but if you do this, it'll amount to the same thing:
    * save status for all photos in collection
    * set status of all photos to "do not publish"
    * remove photo from collection.
    * publish the collection, and make sure you call the deleted callback, but don't do anything else.
    * restore previous photo statuses.
    Only works in Lr4+.
    Rob

  • Release Resource from Project during closeout?

    Hi,
    How to release a resource from Project during project closeout. I found the following options, please suggest the procedure,
    Case : 1. Created Requirement
    2. Assigned Resource (Provisional)
    3. Submit for Approval
    4. Approver approves assignment.
    Option A:
    1: Update Requirement duration
    2. Enter new End date
    3. Subimit for Approval
    4. Approver - Approves assignment
    Option B:
    1. Cancel resource requirement
    Is there any way to release the resources from project. This should reduce the resource available hours ?
    Regards,
    AK

    Hi,
    I also strongly recommend you to read the following material. It is long, I know, but covers almost everything, including your questions:
    Working with the Development Infrastructure
    http://help.sap.com/saphelp_nw04s/helpdata/en/03/f6bc3d42f46c33e10000000a11405a/frameset.htm
    This includes also some conceptual descriptions, tutorials, it describes among others the component model, and nwdi elements one by one like cms, dtr and cbs, etc, I believe it is a good start.
    Still, let me briefly, but really only in a nutshell answer your questions.
    The changes are only in inactive after checkin. You won't find in active, only if you activate (for details about actvation please refer to the above guide, since if I go into details, I am afraid the answer will be too long).
    This was so far the dev/inactive and the dev/active part.
    Then you release the changes and import into consolidation. Here it is indeed tricky, since a force activation takes place after a succesful import, so your changes will be visible in both cons/inactive and cons/active.
    You also asked what to consider if you delete a DC:
    #864515 - How To Delete a Development Component
    You wanted to know where to monitor activities. For this go to the CBS webui and check the "Activities" page.
    Here you can look up all the activations took place in the past,  you can check pending activations, etc, you can even use CBS webui to activate.
    Release: You are completely right, there is no release feature in any webuis, as this feature was never implemented. While you can activate from NWDS and from the CBS webui, regarding release the only option is NWDS.
    I hope this helps, let me know if you require more clarification.
    Best Regars,
    Ervin

  • How to remove available downloads from the list

    how to remove available downloads from the list without it resuming when i open itunes or check for available downloads?

    There is not a way to remove them from the list.  Just let them download, and then delete them from your library when they are done.

  • How to remove the Object from memory.

    Hello.
    Flash file that i made with Flex Builder uses memory too
    much.
    Look at the next example source code.
    var testCan:Canvas = new Canvas();
    this.addChild(testCan);
    this.removeChild(testCan);
    testCan = null;
    but just memory usage still goes up, is not freed instantly.
    so if i load the large flash files on my web browser,
    after 5 munites or something, the web browser is down.
    How to remove the object from memory immediately without
    delay?

    It's all about the Garbage Collector ..
    There is a nice write up here :
    http://www.gskinner.com/blog/archives/2006/06/as3_resource_ma.html

  • Remove icloud account from my ipad without password

    how to remove icloud account from my ipad without password

    You cannot remove an iCloud account from an iOS device without a password.
    Forgot your password?

  • How to remove unused objects from the webcatalog In OBIEE11g

    Hi,
    I want to delete unused objects from obiee11g catalog, i know in obiee10g it's working fine (i.e: we can do it via manage catalog then delete the unused objects) is there any way to do it automatically like RPD utility --->removing unused objects from Physical layer in RPD
    fyi: I don't want to delete manualy. i need somethink like button/link to find unused objects(report,filter,folder..etc) from my obiee11g catalog.
    Thanks
    Deva
    Edited by: Devarasu on Nov 29, 2011 12:06 PM
    Edited by: Devarasu on Nov 29, 2011 3:15 PM

    Hi,
    Checked with Oracle Support team and confirmed below points
    --> incorporated into the Current product and consider as BUG it may resolve future release
    --> Currently there isnt any automatic method to remove the unused objects like reports, filters,folder etc from catalog.
    Treated as Bug
    Bug 13440888 - AUTOMATICALLY REMOVE OF UNUSED CATALOG OBJECTS FROM WEBCATALOG
    FYI:
    SR 3-4984291131: How to remove unused objects from the webcatalog in obiee11g
    Thanks
    Deva

  • How to remove credit card from iphone4s

    how to remove credit card from iphone4s

    Not sure what you mean by this. Are you trying to remove your credit card information from the App Store/iTunes store?

  • How to remove "open dns" from imac

    how to remove "open dns" from imac

    Unlock the Network preference pane, if necessary, by clicking the lock icon in the lower left corner and entering your password. Cllck Advanced, open the DNS tab, and delete the server addresses. Click OK and then Apply.

  • How to remove SD Card from the Card Reader slot - Satellite A100?

    Hi,
    Is there anyone to help me? I inserted a 64 MB SD card in the card reader slot of my Toshiba A100 model. It's the first time i have inserted the card. The card is inside the slot. I can not take it out! I don't have any idea how to remove the card from the card reader slot. I can see the contents of my SD card, can open the files too. But how to remove it out from the slot. Please help me giving your idea to remove the card out from the slot.
    Arjun

    Hi
    In my knowledge the SD card slot doesnt has a any additional helps like the PCMCIA slot to remove the card.
    You have to remove it simply. Try to grab the card and move it out. You can try to use the pair of tweezers. Maybe it helps

  • How to remove sd card from iMac

    hi how to remove sd card from imac ,thanks

    If your machine is in warranty, be careful not to do anything more that might damage it when removing it from the optical drive.  You might even be able to convince an authorized service technician to carefully remove it under warranty from the optical drive.  It is a design issue that lets people accidentally insert the SD card in the optical drive.   Of course if that's the only copy of your information on the SD card, be sure to let them know that, so they are extra careful not to damage it when removing it.

  • How to remove an ipad from my account

    I am given my first ipad away, how i remove this ipad from my account? I already reset all contents.

    See http://support.apple.com/kb/HT5661.

  • How to remove esclamation mark from itunes

    how to remove esclamation mark from itunes???

    See these...
    -> One computer using multiple iTunes Store authorizations
    -> About iTunes Store authorization and deauthorization

  • How to remove an iphone from my id

    hi,
    once my friend sync-ed his iphone with my computer. then whenever he is in wi-fi zone it is asking password for my used id for updating the apps. how to change the user name in his phone or how to remove his device from my apple ID. please help.
    thanks
    karthik

    The only way to fix this is for your friend to delete all the content, on his/her phone, obtained using your ID. Fact is, that's called stealing. There is no other fix.

  • How to remove a node from nlb at runtime?

    hello,
    i need to temporally exclude a node from an nlb.
    May happen that a server is up and working but the web application i'm balancing is out of sinch with the same application in the others nodes.
    Eg. some static variables are not the same of the same static variables of other nodes, because of a timeout, a write error and so on but the server is still working.
    in this case i need to stop the server from nlb because the information in the web application is not in sinch with other nodes.
    I need to prevent users from being serverd from this out to date server, untill it will became updated, but i need to do this programmatically
    how can i do it?

    "DuoMi" <[email protected]> wrote in message
    news:gnojbf$2sg$[email protected]..
    > How to remove a node from XMLList
    >
    > I want remove the first node from XMLList
    >
    >
    > and how to get the combobox all values string:
    >
    > <data>
    > <value>2</value>
    > </date>
    > <data>
    > <value>5</value>
    > </date>
    > <data>
    > <value>8</value>
    > </date>
    >
    > I need a string whit value "2,5,8"
    >
    > thkan you.~
    I think something like
    comboBox.dataProvider..value.toString()
    will work.

Maybe you are looking for