How to remove airport status from menu

Hi,
due to an error within my brain.app I forgot to switch off the "show airport status in menu" before using the migration assistent.
But the new Mac has no airport, Doh!
Now I am unsable to remove the icon from the finder menu. Am I?
Any hints how to remove the icon?

Glad it worked! Thanks for the !

Similar Messages

  • Monioring - How to remove deployment status from monitoring

    How to remove deployment status from monitoring in SCCM 2012
    Thanks in advance
    NTRao

    You can also install this right click tool to be able to delete the deployment direct from the monitoring node.
    http://myitforum.com/myitforumwp/2013/04/16/how-to-add-a-delete-deployment-action-to-right-click-actions-in-configmgr-2012/
    Cheers Paul | http://sccmentor.wordpress.com

  • How to remove 'bounce status' from someone I have bounced?

    I accidently bounced someone from my mail list and they can no longer send me emails. How do I remove their 'bounce status' in order for me to start getting their emails again?
    I'm in quite the predicament,
    Any help is greatly appreciated!

    A bounce is a fake message saying 'this address doesn't exist'. But they should be able to email you normally. Are you sure they tried it again after they received that initial bounce? They may just be non-understanding people who read the bounced message / error message, and now believe they can never email you again. so you may have to explain to them the nature of your fake bounce.
    (I mean: did they actually tell you: "I've been trying to email you several times but I keep on getting these error messages", or did they say: "I got this error message, so I cannot email you", or did they not say anything but are you afraid that they will not be able to email you because you bounced them? In case of the latter 2, just email them saying you bounced them accidentally, and explain the nature of this fake bounce)
    Feddeg
    Message was edited by: feddeg

  • How to remove adobe bridge from menu

    Every time I click folder and it automatic open adobe bridge which I dont want to open the program, all I want to open the folder. I have to click right mouse to open the folder instead of double click on the folder.. How can I remove it?

    The problem could be with the bridge or your OS,
    reset the preferences of the bridge:-
      Start Adobe Bridge and immediately press Ctrl+Alt+Shift (Windows) or Command+Option+Shift (Mac OS) until the Reset Settings dialog box appears.
      Select all three options--Reset Preferences, Reset Standard Workspaces, and Purge Entire Thumbnail Cache--and then click OK
    Check

  • Remove CSLive button from menu

    Hi!
    How to remove CSLIVE button from menu in ILLUSTRATOR cs5?
    Thx!

    Isn't that strange? You can do so with ease in PS so why on earth are the options different here?

  • How to remove the Char.from one Operating Concern

    Hi Guys,
    How to remove the Char. from one Operating Concern.
    I have created one Char. (WWDOC) and moved to Operating Concern (OOCC). Operating Concern is in red status.
    Now, i want to remove that new assigned Char. (WWDOC)from the operating concern (OOCC). I did't find any option in the menu also.
    Appreciate your help.....
    T&R
    VVR

    Hi Sasi,
    Iam not able to push back that char. from my operating concern. In help it is given you have to delete the data contents in the table before pushing back. Please let me know if any other option available.
    Thanks for your reply.
    VVR

  • How do I launch report from menu using RUN_REPORT_OBJECT?

    Hi all,
    Re: How do I launch report from menu (and have it print to the screen) using RUN_REPORT_OBJECT?
    I am using Oracle 9iAS on Windows 2000 and I have a similar problem with launching reports from the menu. The application should call the report via the RUN_REPORT_OBJECT builtin feature from Forms. The report is never displayed.
    The report is in the same folder as the menu form calling it. Do the reports have to be in a specific format? How do I get the report_id?
    The name of the report is seconds_calls. No user-specified parameters are passed. Also, the report object in the object navigator in Forms is Report4 (is this relevant?)
    When I try to run report via the form using this code:
    DECLARE
         report_id REPORT_OBJECT;
         rep_status VARCHAR2(200);
         v_rep VARCHAR2(100);          
         report_job_id VARCHAR2(200);
    --     job_number NUMBER;
    --     server_name VARCHAR2(200) := 'repserver';
    BEGIN
         report_id:= FIND_REPORT_OBJECT('seconds_calls');
         rep_status:=REPORT_OBJECT_STATUS(report_job_id);
         v_rep := RUN_REPORT_OBJECT(report_id);
    END;
    I get this error message:
    FRM-41219 Cannot find report:Invalid ID
    And this message
    FRM-40738 Argument 1 to builtin RUN_REPORT_OBJECT cannot be null
    When I tried to use the same code (above), substituting the object name for the form name,
    I got these messages:
    FRM-41219 Cannot find report:Invalid ID
    FRM-40738 Argument 1 to builtin RUN_REPORT_OBJECT cannot be null
    And FRM-10259 Invalid null argument to packaged procedure or function (???)
    Any ideas?
    Cheers,
    Pippa

    Philippy,
    substr(v_rep,instr(v_rep,'_',-1)+1)
    This code extracts the Reports job id from the Reports Server name. The run_report_object() built-in
    retrieves e.g. RepServ_9 as a job id, but in Reports9i you only need the '9' as a value to retrieve the
    output.
    Use the following sample a template. It is a procedure that expects the reports object name, teh reports server name and the
    output format as an argument. The call to Web.show_document expects the ReportsSrevices to be accessible from teh same server
    (relative addressing is used)
    PROCEDURE RUN_REPORT_OBJECT_PROC (vc_reportobj Varchar2, vc_reportserver varchar2, vc_runformat varchar2) IS
    v_report_id           Report_Object;
    vc_ReportServerJob      VARCHAR2(100); /* unique id for each Report request */
    vc_rep_status      VARCHAR2(100); /* status of the Report job */
    vjob_id               VARCHAR2(100); /* job_id as number only string*
    BEGIN
    /* Get a handle to the Report Object itself. */
    v_report_id:= FIND_REPORT_OBJECT(vc_reportobj);
    SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_COMM_MODE,SYNCHRONOUS);
    SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_DESTYPE,CACHE);
    /* Define the Report output format and the name of the Reports Server as well as a user-defined parameter, passing the department number from Forms to the Report. We don't need a parameter form to be displayed, and therefore paramform is set to "no". */
    SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_DESFORMAT, vc_runformat);
    SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_SERVER, vc_reportserver);
    SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_OTHER,      'p_deptno='||:dept.deptno||'paramform=no');
    vc_ReportServerJob:=RUN_REPORT_OBJECT(report_id);
    /* remove the Reports Server name from teh job id */
    vjob_id := substr(vc_ReportServerJob,length(reportserver)+2,length(vc_ReportServerJob));
    /* Check the report status if finished. */
    vc_rep_status := REPORT_OBJECT_STATUS(vc_ReportServerJob);
    IF vc_rep_status='FINISHED' THEN
    /* Call the Report output to be displayed in a separate browser window.
    The URL for relative addressing is only valid when the Reports Server
    is on the same host as the Forms Server. For accessing a Remote Reports
    Server on a different machine, you must use the prefix http://hostname:port/ */
    WEB.SHOW_DOCUMENT ('/reports/rwservlet/getjobid '||vjob_id ||'?server='vc_reportserver,'_blank');
    ELSE
    message ('Report failed with error message '||vc_rep_status);
    END IF;
    END;
    Frank

  • PFCG issue - removing transaction codes from menu and not clearing up the authorization tab

    I’m using SAP ERP version ECC6 and EHP5 and also we have updated our system with the PSCD FI module.
    I’m having the following issue in PFCG transaction code - I have created a new single role by copied other or from scratch and added few  transaction codes into the menu.  After that, I went in the authorization tab using the "Change Authorization Data" and I felled all the missing information until the role was green out.  I generated the role then I totally went out.  I come back to the same role that I created earlier and I did removed all the transaction codes from the menu and I did find the following:
    - the Authorization tab light didn't change from green to red
    - I went into the Authorization tab by "Change Authorization Data" and a part of the objects were still in.
    Normally behave should be:
    - when we remove one transaction code from the menu the light from Authorization tab should change from green to red.  When you empty the menu then the light color should change also, but the authorization tab should be also empty.
    Could please give me some idea how to do it next?

    Hi Gabriela,
    Most of the times standard roles contains manually added authorization objects. When ever you are creating a new role by copying the existing standard role so by default, these objects will come in to new role.
    Now, coming to your role. After removing t code from role if nothing has changed in Authorization tab means.
    Here are the possible reasons.
    1.  The t code which you have removed might not have any checked and maintained authorization objects, that's why your Authorization tab still in unchanged.
    2. Rememeber, when ever you are adding or removing t code from menu always use expert mode for profile generation option along with "Read old status and merge with new data" Option.
    This will bring the all checked and maintained data for each t code.
    3. After removing the t codes from menu and if you generate the Authorization tab by using expert mode option still if you find authorization objects means, those are manually added authorization objects that's why those were not removed.
    I hope this will give some clue to your issue.
    Thanks,
    Siva

  • How  to remove the check from ShpmntCostsRel. (field VTTK-    FRKRL)

    Hi Experts,
    Can you please tell me to how  to remove the check from ShpmntCostsRel. (field VTTK-    FRKRL) when saving of the shipment document.

    shipment cost calculation only on the Leg level and not on header level. Currently a lot of confusion happened after creating the shipment cost document and found that the status is u201CBu201D.
    now we intend to define detailed specifications to how to create this new user exit to update the shipment cost relevancy at shipment header.
    The main functionality of the user exit  to be created is to remove the check from ShpmntCostsRel. (field VTTK-    FRKRL).can u pls tell how to do this.

  • How do I delete items from menu bar  that are not part of the OS

    How do I delete items from menu bar  that are not part of the OS

    Perhaps you could be more specific, as it is a little difficult to answer your question without any details.  I can give you some general ideas though.
    On my machine there are a few applications that have installed items into the menu bar - I'm assuming you are talking about the icons on the right hand side of the top bar. To remove those items, I would generally need to uninstall the program that created them. To do this varies a little from application to application.
    Also, sometimes an application will have preferences that allow you choose if you want to display the item in the menu bar.
    So, my general advice would be that you need to identify the application that placed the item there, and remove it from your computer.  If there is an uninstall program for that application, I would run that in the first instance.
    If you don't actually wish to uninstall the application, you may need to click on the item or run the application and see if there is a setting to not show the menu bar item.
    Hope that helps.
    Ivan

  • Icon airport disappeared from menu bar,only see grey space

    icon airport disappeared from menu bar,only see grey space

    Open your System Preferences and go to the "Network" pane. Enable "Show Wi-Fi status in Menu Bar".

  • How to remove credit card from iphone4s

    how to remove credit card from iphone4s

    Not sure what you mean by this. Are you trying to remove your credit card information from the App Store/iTunes store?

  • How to remove available downloads from the list

    how to remove available downloads from the list without it resuming when i open itunes or check for available downloads?

    There is not a way to remove them from the list.  Just let them download, and then delete them from your library when they are done.

  • How to remove "open dns" from imac

    how to remove "open dns" from imac

    Unlock the Network preference pane, if necessary, by clicking the lock icon in the lower left corner and entering your password. Cllck Advanced, open the DNS tab, and delete the server addresses. Click OK and then Apply.

  • How to remove SD Card from the Card Reader slot - Satellite A100?

    Hi,
    Is there anyone to help me? I inserted a 64 MB SD card in the card reader slot of my Toshiba A100 model. It's the first time i have inserted the card. The card is inside the slot. I can not take it out! I don't have any idea how to remove the card from the card reader slot. I can see the contents of my SD card, can open the files too. But how to remove it out from the slot. Please help me giving your idea to remove the card out from the slot.
    Arjun

    Hi
    In my knowledge the SD card slot doesnt has a any additional helps like the PCMCIA slot to remove the card.
    You have to remove it simply. Try to grab the card and move it out. You can try to use the pair of tweezers. Maybe it helps

Maybe you are looking for