How to remove all the fields added to CI_Include in Sap Standard table

Hi,
I have added a new custom field in the CI_include structure in a standard SAP table. However now I want to remove that field but it not allowing me to remove the field as there is no field left in that CI_Include.
Has anybody tried this before?

Hi,
I think you have to delete the whole CI. Go to SE11 enter the name of the CI and press delete.
Not sure, but maybe this is the solution
Regards Rudi

Similar Messages

How to remove all the cleaup events from DBA_AUDIT_MGMT_CLEAN_EVENTS

Dear gurus,
how to remove all the cleaup events from DBA_AUDIT_MGMT_CLEAN_EVENTS
Arun

Hi,
Take a look:
http://www.morganslibrary.org/reference/pkgs/dbms_audit_mgmt.html
Regards,

TS4147 How to remove all the duplicated contacts from ICloud?

How to remove all the duplicated contacts from ICloud?

If your Mac is syncing contacts with your iCloud account, open Contact on your Mac and go to Card>Look for Duplicates, then Merge the found duplicates. These changes will be synced to iCloud.

How to reduce the pdf version & how to remove all the pre-delivered field from a pdf file.

Hi Team,
1) Please help me to reduce the version of a pdf file which is v1.7 as my BI Publisher support only pdf version upto Version1.5.
2)This pdf file 1.7 contains some pre-delivered fields, i want to remove all the pre-delivered fields. Please suggest.
PFA link:-
http://www.uscis.gov/files/form/i-539.pdf
Please guide to remove the pre-delivered fields from this pdf & how to reduce the version.

A lot depends on what you want to do with the file. The encryption has limited most options on the form. If you are wanting to simply post a view of the form, then you might try a screen capture. Of course there is always the question of what you want to do with the form and any legal aspects related to that use. Other than answering potential legal questions of your use, we might be able to help more if we were aware of the desired use. At the moment, the screen capture is my only suggestion. There may be other work arounds, but probably not appropriate for discussion on this forum.
If you are wanting the form for publication as an example in some document, I would strongly suggest you contact the gov't agency and discuss your intent and try to get a version you can use with their approval. Overall, that is the cleanest way to do whatever you are after for a legit purpose. Even a graphic version should have the permission of the government agency.

How to split all the fields of output ls-l from an internal table

Hi all,
Using ls-l command i have brought the file attributes of a file like its read and write permissions,creation date ,path etc in a internal table.
Now how to split all these fields from the internal table or what should be the splitting criteria.
The field contents of internal table are like this:
-rw-rw---- 1 devadm sapsys 18360 apr 29......so on
I want to split this into different fields.
Kindly suggest.
Thank You.

Hi,
I think the delimiter will be space. For date alone (Apr 29) you need to concatenate after the string has been split.
Thanks and regards,
S. Chandramouli

How to reduce the version of a pdf 1.7 to 1.5 & how to remove all the embedded xml form ?

Hi Team,
I am using adobe acrobat x pro. I have a pdf file of version 1.7 which showing embedded xml forms. I tried to remove all the 'embedded xml form' by using Adobe Live cycle Designer ES2. Then i tried to reduce the version by using Adobe acrobat x pro but it's still showing that there are some 'embedded xml form' for which it's not allowing me to reduce the vesion of pdf file in Adobe Acrobat x pro and also i want reduce the version of the pdf 1.7 to 1.5. Can you please guide me the step to reduce the pdf file version and how to remove the embedded xml form from the pdf file ?

If the PDF is the same one from the link in your post here:
http://forums.adobe.com/thread/1174643
That PDF being protected may have something to do with why you cannot do what you'd like to.
Be well...

How to remove all the files in a directory

hi all ,
am new to unix.. i need to remove all the fine in the directory .
how can i remove it.. can any one tel me the command..
i have use rm -f logs(folder name).
but it is not removing any file ..
Thanks
sreedahr

Hi;
What is your OS?Which user you are using for delete process, you have w/r permission for your delete process on files
You can use man rm and can check manuel
Did you see:
http://en.wikipedia.org/wiki/Rm_(Unix)
http://www.cyberciti.biz/faq/howto-linux-unix-delete-remove-file/
http://www.cyberciti.biz/faq/delete-remove-a-directory-unix-command/
Pelase check links
Regard
Helios

How to remove all the users personalization at once?

Hello,
I would like to remove all the personalization the users have made in their portal display (for example, theme).
How do I do it?
Roy

Found it under the support section.
Support->Portal Content Directory->Personalization cleanup

How to remove all the printable apps from an HP Photosmart 7520 touchscreen at once

In typcial HP fashion, the printer is gummed up with commericals and third party apps I do not want.
I see how in the ePrint website to delete the apps one by one - which is taking forever....
Is there a way to remove all the apps from the printer at the same time?
Thanks...

Hi there, this thread provides details on how to remove apps from your web connected printer
http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile-Printing-and-ePrintCenter/How-to-add-or-remove...
However if you run in to any problems please post back and I'll try and help.
Best
If my reply helped you, feel free to click on the Kudos button (hover over the "thumbs up").
If my reply solved your problem please click on the Accepted Solution button so other Forum users may benefit from viewing the post.
I am an HP employee.

How to include all the fields of a Table into a Structure.

How to include a Complete Table into a Structure.
I want to include all the fields of KNA1 into a structure say W_KNA1(A local structure declared within a program)....How this can b acheived.
Thanks in Advance.

if i want to use INCLUDE STRUCTURE.....how will it work.
TYPES : begin of ty_kna1,
INCLUDE STRUCTURE KNA1,
end of ty_kna1.
tell me this is correct stmt.

How to list all the Fields for an Active Directory Object

How do I list all the fields that an Active Directory object contains? I know the most common ones, but would like to enumerate through all the fields and obtain the type of fields and their values...

Here is my complete code - I only put snippets so that the post was not too huge...
Option Explicit
Const ADS_SCOPE_SUBTREE = 2
Const ForReading = 1, ForWriting = 2, ForAppending = 8
Dim adoCommand, adoConnection, adoRecordSet
Dim dtmDate, dtmValue
Dim j
Dim lngBias, lngBiasKey, lngHigh, lngLow, lngValue
Dim objADObject, objClass, objDate, objFile, objFSO, objRootDSE, objShell
Dim pathToScript
Dim strAdsPath, strConfig, strDNSDomain, strHex, strItem, strProperty, strValue
Dim strFilter, strQuery
Set objFSO = CreateObject("Scripting.FileSystemObject")
Set objShell = CreateObject("Wscript.Shell")
pathToScript = objShell.CurrentDirectory
Set objFile = objFSO.CreateTextFile(pathToScript & "\TestAD.csv")
' Determine Time Zone bias in local registry.
' This bias changes with Daylight Savings Time.
lngBiasKey = objShell.RegRead("HKLM\System\CurrentControlSet\Control\TimeZoneInformation\ActiveTimeBias")
If (UCase(TypeName(lngBiasKey)) = "LONG") Then
lngBias = lngBiasKey
ElseIf (UCase(TypeName(lngBiasKey)) = "VARIANT()") Then
lngBias = 0
For j = 0 To UBound(lngBiasKey)
lngBias = lngBias + (lngBiasKey(j) * 256^j)
Next
End If
' Determine configuration context and DNS domain from RootDSE object.
Set objRootDSE = GetObject("LDAP://RootDSE")
strConfig = objRootDSE.Get("configurationNamingContext")
strDNSDomain = objRootDSE.Get("defaultNamingContext")
Set adoCommand = CreateObject("ADODB.Command")
Set adoConnection = CreateObject("ADODB.Connection")
adoConnection.Provider = "ADsDSOObject"
adoConnection.Open "Active Directory Provider"
adoCommand.ActiveConnection = adoConnection
adoCommand.CommandText = "SELECT * FROM 'LDAP://" & strDNSDomain & "'WHERE objectClass=user'"
adoCommand.Properties("Page Size") = 1000
adoCommand.Properties("Searchscope") = ADS_SCOPE_SUBTREE
Set adoRecordSet = adoCommand.Execute
Set adoRecordSet = adoCommand.Execute
adoRecordSet.MoveFirst
Do Until adoRecordSet.EOF
strAdsPath = adoRecordSet.Fields("ADsPath").Value
' Bind to Active Directory object specified.
Set objADObject = GetObject(strAdsPath)
Set objClass = GetObject(objADObject.Schema)
' Write which object is grabbed from AD
objFile.Write(Replace(strAdsPath, ",", ";;;"))
' Enumerate mandatory object properties.
For Each strProperty In objClass.MandatoryProperties
On Error Resume Next
strValue = objADObject.Get(strProperty)
If (Err.Number = 0) Then
On Error GoTo 0
If (TypeName(strValue) = "String") Or (TypeName(strValue) = "Long") Or (TypeName(strValue) = "Date") Then
objFile.Write("," & strProperty & "|||" & Replace(CStr(strValue), ",", ";;;"))
ElseIf (TypeName(strValue) = "Byte()") Then
strHex = OctetToHexStr(strValue)
objFile.Write("," & strProperty & "|||" & CStr(strHex))
ElseIf (TypeName(strValue) = "Variant()") Then
For Each strItem In strValue
On Error Resume Next
objFile.Write("," & strProperty & "|||" & Replace(CStr(strItem), ",", ";;;"))
If (Err.Number <> 0) Then
On Error GoTo 0
objFile.Write("," & strProperty & "|||Value cannot be displayed")
End If
On Error GoTo 0
Next
ElseIf (TypeName(strValue) = "Boolean") Then
objFile.Write("," & strProperty & "|||" & CBool(strValue))
Else
objFile.Write("," & strProperty & "|||Type:" & TypeName(strValue))
End If
Else
Err.Clear
sColl = objADObject.GetEx(strProperty)
If (Err.Number = 0) Then
For Each strItem In sColl
objFile.Write("," & strProperty & "|||" & CStr(strItem))
If (Err.Number <> 0) Then
objFile.Write("," & strProperty & "|||Value cannot be displayed")
End If
Next
On Error GoTo 0
Else
Err.Clear
Set objDate = objADObject.Get(strProperty)
If (Err.Number = 0) Then
lngHigh = objDate.HighPart
If (Err.Number = 0) Then
lngLow = objDate.LowPart
If (lngLow < 0) Then
lngHigh = lngHigh + 1
End If
lngValue = (lngHigh * (2 ^ 32)) + lngLow
If (lngValue > 120000000000000000) Then
dtmValue = #1/1/1601# + (lngValue / 600000000 - lngBias) / 1440
On Error Resume Next
dtmDate = CDate(dtmValue)
If (Err.Number <> 0) Then
objFile.Write("," & strProperty & "|||<Never>")
Else
objFile.Write("," & strProperty & "|||" & CStr(dtmDate))
End If
Else
objFile.Write("," & strProperty & "|||" & FormatNumber(lngValue, 0))
End If
Else
objFile.Write("," & strProperty & "|||Value cannot be displayed")
End If
Else
On Error GoTo 0
objFile.Write("," & strProperty)
End If
On Error GoTo 0
End If
End If
Next
' Enumerate optional object properties.
For Each strProperty In objClass.OptionalProperties
On Error Resume Next
strValue = objADObject.Get(strProperty)
If (Err.Number = 0) Then
On Error GoTo 0
If (TypeName(strValue) = "String") Then
objFile.Write("," & strProperty & "|||" & Replace(CStr(strValue), ",", ";;;"))
ElseIf (TypeName(strValue) = "Long") Then
objFile.Write("," & strProperty & "|||" & Replace(CStr(strValue), ",", ";;;"))
ElseIf (TypeName(strValue) = "Date") Then
objFile.Write("," & strProperty & "|||" & Replace(CStr(strValue), ",", ";;;"))
ElseIf (TypeName(strValue) = "Byte()") Then
strHex = OctetToHexStr(strValue)
objFile.Write("," & strProperty & "|||" & CStr(strHex))
ElseIf (TypeName(strValue) = "Variant()") Then
For Each strItem In strValue
On Error Resume Next
objFile.Write("," & strProperty & "|||" & Replace(CStr(strItem), ",", ";;;"))
If (Err.Number <> 0) Then
On Error GoTo 0
objFile.Write("," & strProperty & "|||Value cannot be displayed")
End If
On Error GoTo 0
Next
ElseIf (TypeName(strValue) = "Boolean") Then
objFile.Write("," & strProperty & "|||" & CBool(strValue))
Else
objFile.Write("," & strProperty & "|||Type:" & TypeName(strValue))
End If
Else
Err.Clear
sColl = objADObject.GetEx(strProperty)
If (Err.Number = 0) Then
For Each strItem In sColl
objFile.Write("," & strProperty & "|||" & CStr(strItem))
If (Err.Number <> 0) Then
objFile.Write("," & strProperty & "|||Value cannot be displayed")
End If
Next
On Error GoTo 0
Else
Err.Clear
Set objDate = objADObject.Get(strProperty)
If (Err.Number = 0) Then
lngHigh = objDate.HighPart
If (Err.Number = 0) Then
lngLow = objDate.LowPart
If (lngLow < 0) Then
lngHigh = lngHigh + 1
End If
lngValue = (lngHigh * (2 ^ 32)) + lngLow
If (lngValue > 120000000000000000) Then
dtmValue = #1/1/1601# + (lngValue / 600000000 - lngBias) / 1440
On Error Resume Next
dtmDate = CDate(dtmValue)
If (Err.Number <> 0) Then
objFile.Write("," & strProperty & "|||<Never>")
Else
objFile.Write("," & strProperty & "|||" & CStr(dtmDate))
End If
Else
objFile.Write("," & strProperty & "|||" & lngValue)
End If
Else
objFile.Write("," & strProperty & "|||Value cannot be displayed")
End If
Else
On Error GoTo 0
objFile.Write("," & strProperty & "||| ")
End If
On Error GoTo 0
End If
End If
Next
objFile.WriteLine("")
adoRecordSet.MoveNext
Loop
objFile.Close
' Function to convert OctetString (Byte Array) to a hex string.
Function OctetToHexStr(arrbytOctet)
Dim k
OctetToHexStr = ""
For k = 1 To Lenb(arrbytOctet)
OctetToHexStr = OctetToHexStr _
& Right("0" & Hex(Ascb(Midb(arrbytOctet, k, 1))), 2)
Next
End Function
I have been able to obtain all the Computer, Contact, Group and OU objects without issue with this code...

How to list all the fields under an Infotype!

Hi
I need a list of fields under an Infotype, used the following link to list them but unsuccesful, is there any other way I can list the infotype feilds.
Re: Infotype 0002 all fields
Thanks

Hi Tara,
The FM 'DDIF_FIELDINFO_GET' gives you all the fields of the table in the Exporting IT 'DFIES_TAB' that you mention under the parameter 'TABNAME'. I am not sure why it doesnt work for you. Alternatively you can also try this FM 'DDIF_NAMETAB_GET' (This FM is actually used in the FM 'DDIF_FIELDINFO_GET' ) .
If you are still unsuccesful in meeting your requirement then please paste your piece of code.
Regards
Nanda

Form Guide: How to hide all the field of a subform

Hello,
I'm an experienced LC Designer user for PDF Forms. I need to work on my first Form guide today.
The first thing I cannot realize is to hide all the fields in a subform, based on some conditions. Is it possible to make that in a sort of script that work fine for both the pdf and the form guide?
I have noticed that subform doen't exists into form guide. What append with theire event scripts?
Thanks
Denis

DECLARE
LC$Block   Varchar2(40) := get_form_property( NAME_IN('System.Current_Form'), FIRST_BLOCK ) ;
BEGIN
Loop -- For each block of the form
     Set_Block_Property( LC$Block, INSERT_ALLOWED, PROPERTY_FALSE );
     Set_Block_Property( LC$Block, UPDATE_ALLOWED, PROPERTY_FALSE );
     Set_Block_Property( LC$Block, DELETE_ALLOWED, PROPERTY_FALSE );
     LC$Block := get_block_property( LC$Block, NEXTBLOCK ) ; -- next block
     Exit when LC$Block is null ;
End loop ;
END;Francois

How to remove all the blanks in a String

what I mean is that there is any convenient way to help remove the blanks (or carriage returns) in a string

Hi
Remove all blanks (whitespace,carriage return,tabs,etc..) once a time:
string.replaceAll("\\s", "");
Regards.

How to concatenate all the fields in a single statement with tilda..

hi, i have 10 fields, i have to concatenate those fields seperated with tilda... and put into the application server...in a single statement,
kindly suggest me hw to write..?
Thanx in Advance.
Akshitha.

Hi.....
Just see the following code...
It solves your requirement.....
REPORT ZCSV_SPFLI_APP.
TABLES :
SPFLI.                               " Flight
FIELD-SYMBOLS : <FS>. "TYPE C.
DATA T_SPFLI LIKE STANDARD TABLE OF SPFLI .
DATA W_CHAR(20) TYPE C.
DATA W_TYPE .
DATA:
BEGIN OF T_TABLE OCCURS 0,
    LINE TYPE STRING,
END OF T_TABLE.
SELECT * FROM SPFLI INTO TABLE T_SPFLI.
LOOP AT T_SPFLI INTO SPFLI.
DO.
    ASSIGN COMPONENT SY-INDEX OF STRUCTURE SPFLI TO <FS>.
    IF SY-SUBRC NE 0.
      EXIT.
    ELSE.
      MOVE <FS> TO W_CHAR.
      IF SY-INDEX EQ 1.
        T_TABLE-LINE = <FS>.
      ELSE.
        CONCATENATE T_TABLE-LINE '~' W_CHAR INTO T_TABLE-LINE.
      ENDIF.
    ENDIF.
ENDDO.
CONDENSE T_TABLE-LINE.
APPEND T_TABLE.
ENDLOOP.
LOOP AT T_TABLE.
WRITE / T_TABLE-LINE.
ENDLOOP.
OPEN DATASET 'YH647_SPFLI' FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
IF SY-SUBRC NE 0.
MESSAGE ' File is Not Opend' TYPE 'S'.
ENDIF.
LOOP AT T_TABLE.
TRANSFER T_TABLE-LINE TO 'YH647_SPFLI'.
ENDLOOP.
CLOSE DATASET 'YH647_SPFLI'.
This reads flight detail and makes the separated by '~' and stores in the application server (<b>OPEN_DATASET, TRANAFER , CLOSE DATASET</b>)
Reward points if useful.........
Suresh........

How to remove all the fields added to CI_Include in Sap Standard table

Similar Messages

Maybe you are looking for