How to remove an arc correctly?

Can someone explain how to remove an ARC relation correctly?
Deleted the arc in the logical model but when I do an "engineer to relational model" the ARC is not removed there.

I'm afraid there is a problem that Engineer to Relational Model does not detect that an arc has been removed.
Until this is fixed, you will need to remove the arc in the Relational Model as well.
David

Similar Messages

HTML Tags appear in Notes : how to removing display HTML Correctly.

Hi the Notes section of HTML CLient for service request, we are seeing HTML Tags appearing in the following format.
<html><b>Some message/b></html>
We want to make it appear in HTML format. Not with the HTML Tags. Is there some way to get rid of the HTML Tags ?
Appreciate you inputs.
Rgds

I guess you need to explain your page structure and actions you are doing in a more detailed way. You mentioned a table Jtf_NOTES_B, is it a OAF page or a JSP page ?
--Shiv

DM 3.0.0.665: How to remove arc from relational model

When creating an arc in the logical model, "engineering to relational" will update the relational model so "DDL Preview" shows DDL for two triggers that enforce the arc.
After removing the arc from the logical model and "engineer to relational" I still see the trigger code in "DDL Preview", as if the arc is still there.
Where can I see the arc in the relational model, and how do I remove it from the model?
/ Marc de Oliveira
Edited by: marc66 on 2011-03-01 06:49

Marc,
you can see the arc on diagram - probably it's hidden. You can move some of parent tables and probably it'll appear. If still invisible then you can create subview and put child table and two parent tables on it - arc should appear and you can delete it.
Philip

ThinkPad Yoga - Keyboard key stucks - how to remove it correctly

Hi everybody,
this is maybe a simple and stupid question but I won't do anything wrong.
One of my keyboard keys does not work correctly, I think there is something under the key which is blocking because when I press the key I feel a stronger resistance than on the other keys. Sometimes I need to press the key 3 or 4 times before the letter is written - realy annoying
Obviously I should remove the key and clean it or remove whatever is under the key. Since my ThinkPad Yoga is quite new I don't want to damage it or lose my warrenty through "learning by doing"...
So can anybody tell me how to remove a key from the ThinkPad Yoga keyboard correctly and reassemble it correctly as well? -> without any damage
Reagards,
Ben

Thanks for the link, but don't you think there is a possibility to remove a single key and not the whole keyboard?
I found this video for "ThinkPad keyboards" - however, like you mentioned the lift and lock keyboard is probably a special case.
Does anyone know if the method from the video works for the TP Yoga also?

How to remove clothes in photoshop cs5

can anyone let me know how to remove clothes in photoshop cs5? Please help

Or make a selection of the clothes and put on a model showing skin in correct area.
Depending on the area that is to be created this may be the best option – provided lighting conditions, pose etc. fit at least somewhat.

How to remove magicjack plus osx 10.7.5

Hello,
I am new to Mac and I am not a Unix system programmer.
I purchased a MagicJack Plus for my sister and I set it up using my new iMac for her. Now I would like to remove the setup software from my iMac as I do not like to leave extraneous software on my machine. Also, MagicJack seems to be even more clueless than me, which I find VERY disturbing.
I. I viewed and attempted to execut instructions outlined in "How do I uninstall magicJack from my computer?" on MJ wesite as follows:
Download CompleteUninstall.sh. After the download is complete, open a terminal window by navigating to /Applications/Utilities/Terminal.
In the Terminal Window, navigate to your download directory (usually Downloads) by typing cd Downloads and pressing enter. Next, type chmod+x CompleteUninstall.sh and press enter. Now type ./CompleteUninstall.sh and press enter again.
For reference the CompleteUninstall.sh script contains the following:
#!/bin/sh
# instalator files
rm -rf ~/.magicJack
rm -rf ~/MJInstlogs
rm -rf ~/Desktop/Start\ magicJack.app
# softphone files
rm -rf ~/Library/Preferences/magicJack
# WebKit cache
rm -rf ~/Library/Caches/magicJack
II. This is results:
Last login: Tue Apr 23 11:36:11 on ttys000
Larrys-iMac:~ ldwalker$ cd Downloads
Larrys-iMac:Downloads ldwalker$ chmod+x CompleteUninstall.sh
-bash: chmod+x: command not found
Larrys-iMac:Downloads ldwalker$
The change ownership command failed, I presume because the path to the Unix Commands directory is not set? If so, how do I set it and then reset everything back to current defaults?
Thanks in advance for any help you can provide!

baltwo,
Thanks VERY much.......this solved my problem.
I just cut and pasted the command into my terminal session. I assumed the format was correct as the exact same command set format was used on several different web sites giving instructions on how to remove the magicjack software.
Amazing how incorrect info gets propagated around the web!

How to remove an XML file from Data Template in Data Definition Screen

Hi,
Issue: I have uploaded the file in Data definition in Data Template.
How to remove it.
Also what does each file type mean?
XML Schema
Data Template
Preview file
Bursting control File
I have an XML file and XSL file. I need to have an output in XML.
So I installed my XML file in data template in data definition.
And XSL file in Templates.
Am I correct?
11.0.10.2
Regards,
Avijit

Issue: I have uploaded the file in Data definition in Data Template.
How to remove it.You cannot remove it but you can end-date it.
Also what does each file type mean?
XML Schema
Data Template
Preview file
Bursting control FileThis is explained in "Oracle XML Publisher Administration and Developer's Guide Release 12" manual -- http://docs.oracle.com/cd/B34956_01/current/acrobat/120xdoig.pdf
I have an XML file and XSL file. I need to have an output in XML.
So I installed my XML file in data template in data definition.
And XSL file in Templates.
Am I correct?Correct -- See Chapter 2 "Creating the Template" and Chapter 5 "Data Templates and Chapter" in the same doc referenced above for details.
Thanks,
Hussein

SCCM 2012 SP1 - Evil Folders in Reporting Services - What Are They and How to Remove Them

Hello All,
There are a lot of sub-folders in the http://CentralSiteSCCM/ReportServer. They are like:
<dir> Config_Mgr_CEN
<dir> Config_Mgr_CEN.OLD.0
<dir> Config_Mgr_CEN.OLD.1
<dir> Config_Mgr_CEN.OLD.10
<dir> Config_Mgr_CEN.OLD.100
<dir> Config_Mgr_CEN.OLD.1000
Only <dir> Config_Mgr_CEN is properly populated with the correct set of the default folders.
Would you be so kind to advise on:
What are they?
How to remove them?
What to do in order for them not to appear any more?
Thank you very much in advance!

Hi Mike,
I ran into an issue when I did the SP1 upgrade where a majority of our reports were duplicated. I created a script to delete these duplicate reports and I've adjusted it to work for your situation. You can find the original thread here, if you're interested:
http://social.technet.microsoft.com/Forums/en-US/configmanagergeneral/thread/dc9aa3b4-cea9-4a07-87ca-2795a2dbc04e
You'll need to know your SCCM site code and the server name to run this script.
# SCCM2012SP1-RemoveDuplicateSSRSFolders.ps1
# This script will connect to SSRS on a specified server and delete all folders that end with .OLD.*
# Used for SSRS cleanup after SCCM 2012 SP1 installation
# Script must be run from an account that has access to modify the SSRS instance
# 3/22/2013 - Mike Laughlin
# Resources used in writing this script:
# Starting point: http://stackoverflow.com/questions/9178685/change-datasource-of-ssrs-report-with-powershell
# API Documentation: http://msdn.microsoft.com/en-us/library/ms165967%28v=sql.90%29.aspx
# Previous script: http://social.technet.microsoft.com/Forums/en-US/configmanagergeneral/thread/dc9aa3b4-cea9-4a07-87ca-2795a2dbc04e
# Define variables
$SiteCode = ""
$serverName = ""
# Set the value of $noConfirm to $True only if you don't want to manually confirm folder deletion. Use with caution.
$noConfirm = $False
# Safeguard
If ( $SiteCode -eq "" -or $serverName -eq "" ) { Write-Host "Enter the required information for the SiteCode and serverName variables before running this script." -ForegroundColor Red -BackgroundColor Black ; Exit }
# Connect to SSRS
$ssrs = New-WebServiceProxy -uri http://$serverName/ReportServer/ReportService2005.asmx?WSDL -UseDefaultCredential
# Get a listing of all folders in SSRS
$reportFolders = $ssrs.ListChildren("/", $True)
# Find all folders containing .OLD.*
$foldersToDelete = $reportFolders | Where { $_.Name -like "ConfigMgr_" + $SiteCode + ".OLD.*"}
# Quit if no folders are found
If ( $foldersToDelete.Count -eq 0 ) { Write-Host "No folders with .OLD.* found. Quitting." ; Exit }
# Show a listing of the folders that will be deleted
Write-Host "The following folders will be deleted from SSRS on" $serverName":`n"
$foldersToDelete.Name
Write-Host "`nTotal number of folders to delete:" $foldersToDelete.Count "`n"
# Get confirmation before deleting if $noConfirm has not been changed
If ( $noConfirm -eq $False )
$userConfirmation = Read-Host "Delete these folders from" $serverName"? Enter Y or N"
If ( $userConfirmation.ToUpper() -ne "Y" ) { Write-Host "Quitting, folders have not been deleted." ; Exit }
# Delete the folders
$deletedFolderCount = 0
Write-Host "Beginning to delete folders now. Please wait."
ForEach ( $folder in $foldersToDelete ) { $ssrs.DeleteItem($folder.Path) ; $deletedFolderCount++ }
Write-Host "Folders have been deleted. Total number of deleted folders:" $deletedFolderCount
Standard disclaimer: While this script worked just fine for me in my environment, I make no guarantees that it will work anywhere else. I've attempted to make this script as user friendly and generic as possible, but it may require slight tweaking to work properly.

Does anyone know how to remove pop up, malware and virus form OS X 10.9.5, there is a lot of pop up on my mac book air.

Does any one know how to remove pop up and malware. There is a lot of pop up on my mac book air OSX 10.10

Helpful Links Regarding Malware Problems
If you are having an immediate problem with ads popping up see The Safe Mac » Adware Removal Guide and AdwareMedic.
Open Safari, select Preferences from the Safari menu. Click on Extensions icon in the toolbar. Disable all Extensions. If this stops your problem, then re-enable them one by one until the problem returns. Now remove that extension as it is causing the problem.
The following comes from user stevejobsfan0123. I have made minor changes to adapt to this presentation.
Fix Some Browser Pop-ups That Take Over Safari.
Common pop-ups include a message saying the government has seized your computer and you must pay to have it released (often called "Moneypak"), or a phony message saying that your computer has been infected, and you need to call a tech support number (sometimes claiming to be Apple) to get it resolved. First, understand that these pop-ups are not caused by a virus and your computer has not been affected. This "hijack" is limited to your web browser. Also understand that these messages are scams, so do not pay any money, call the listed number, or provide any personal information. This article will outline the solution to dismiss the pop-up.
Quit Safari
Usually, these pop-ups will not go away by either clicking "OK" or "Cancel." Furthermore, several menus in the menu bar may become disabled and show in gray, including the option to quit Safari. You will likely have to force quit Safari. To do this, press Command + option + esc, select Safari, and press Force Quit.
Relaunch Safari
If you relaunch Safari, the page will reopen. To prevent this from happening, hold down the 'Shift' key while opening Safari. This will prevent windows from the last time Safari was running from reopening.
This will not work in all cases. The shift key must be held at the right time, and in some cases, even if done correctly, the window reappears. In these circumstances, after force quitting Safari, turn off Wi-Fi or disconnect Ethernet, depending on how you connect to the Internet. Then relaunch Safari normally. It will try to reload the malicious webpage, but without a connection, it won't be able to. Navigate away from that page by entering a different URL, i.e. www.apple.com, and trying to load it. Now you can reconnect to the Internet, and the page you entered will appear rather than the malicious one.
An excellent link to read is Tom Reed's Mac Malware Guide.
Also, visit The XLab FAQs and read Detecting and avoiding malware and spyware.
See these Apple articles:
Mac OS X Snow Leopard and malware detection
OS X Lion- Protect your Mac from malware
OS X Mountain Lion- Protect your Mac from malware
OS X Mavericks- Protect your Mac from malware
About file quarantine in OS X
If you require anti-virus protection Thomas Reed recommends using ClamXAV. (Thank you to Thomas Reed for this recommendation.)
From user Joe Bailey comes this equally useful advice:
The facts are:
1. There is no anti-malware software that can detect 100% of the malware out there.
2. There is no anti-malware that can detect everything targeting the Mac.
3. The very best way to prevent the most attacks is for you as the user to be aware that
     the most successful malware attacks rely on very sophisticated social engineering
     techniques preying on human avarice, ****, and fear.
4. Internet popups saying the FBI, NSA, Microsoft, your ISP has detected malware on
    your computer is intended to entice you to install their malware thinking it is a
    protection against malware.
5. Some of the anti-malware products on the market are worse than the malware
    from which they purport to protect you.
6. Be cautious where you go on the internet.
7. Only download anything from sites you know are safe.
8. Avoid links you receive in email, always be suspicious even if you get something
    you think is from a friend, but you were not expecting.
9. If there is any question in your mind, then assume it is malware.

How to remove/ignore the element using SAXParser

hello all,
I want to parse the text content in string from the existed xml file. but had problem with the parser. Does anyone have good idea, how to remove or ignore the <link> tag in tag <text>?
IS: the output is only the rest of part text behind <link style="blue" src="www.test.com" />.
Wanted: the whole text in <text> tags. like "Reach more customers by creating targeted micro-sites using test's multi-store retailing functionality."
Given below is my code :
<?xml version="1.0"?>
<test xmlns="http://www.test.com/test">
<title>test title</title>
<text>Reach more customers by creating targeted micro-sites using test's<link style="blue" src="www.test.com" /> multi-store retailing functionality.</text>
</test>java code using SAXParser
public void startElement(String uri, String localName, String qName, Attributes attributes) throws SAXException {
public void endElement(String uri, String localName, String qName) throws SAXException {
    if (qName.equals("text")) {
      System.out.println("content: " + text);
public void characters(char[] ch, int start, int length) throws SAXException {
    String str = new String(ch, start, length);
    if (str.length() > 0)
      text = text == null ? str : text + str;
...Edited by: lauehuang on Sep 9, 2008 4:37 AM

i think u can't modify the xml file using SAX
SAX is only for reading XML
for any modifications in xml file u have to use DOM parser....
correct me if i m wrong....
Thanks & Regs
Ravi

Fedlet: How to remove SPNameQualifier attribute from Authnrequest message

Hi all,
Hopefully someone on this forum is able to give me some hints how to proceed.
I'm trying to understand how SAML2 works, and how (if I get it working with sample application) I can integrate it with our existing application.
SP: Fedlet (Running on Weblogic 10.3)
IDP: Shibboleth (Running on Weblogic 10.3)
Both are running on the same server, but in different domains (and obviously with different ports).
Fedlet is installed, and has the IDP meta data file loaded. When I go to the fedletsample application, I get the 3 hyperlinks (Of which "Run Identity Provider initiated Single Sign-On" is a broken link). Clicking on the "Run Fedlet (SP) initiated Single Sign-On using HTTP POST binding" brings me to the IDP login page.
My IDP is using the embedded LDAP server from Weblogic. I enter the UID and Password, and (if details are entered correct), I'm redirected to the SP site again. Unfortunately at the SP site (The fedlet app) the message states "Single Sign On failed.".
From reading the log file at the IDP, I understand that my user is successfully authenticated, however IDP (Shibboleth) is unable to process "SPNameQualifer"
The log states a lot but I think the issue is related to an unknown attribute in the NameIDPolicy element:
My NameIDPolicy in the AuthnRequest looks like this
=====
     <samlp:NameIDPolicy
          AllowCreate="true"
          Format="urn:oasis:names:tc:SAML:2.0:nameid-format:transient"
          SPNameQualifier="fedletsp"
          xmlns:samlp="urn:oasis:names:tc:SAML:2.0:protocol"/>
=====
If I look up the details in the IDP log I see this
======
- Starting to unmarshall DOM element {urn:oasis:names:tc:SAML:2.0:protocol}NameIDPolicy
- Targeted QName checking is not available for this unmarshaller, DOM Element {urn:oasis:names:tc:SAML:2.0:protocol}NameIDPolicy was not verified
- Building XMLObject for {urn:oasis:names:tc:SAML:2.0:protocol}NameIDPolicy
- Unmarshalling attributes of DOM Element {urn:oasis:names:tc:SAML:2.0:protocol}NameIDPolicy
- Pre-processing attribute AllowCreate
- Attribute AllowCreate is neither a schema type nor namespace, calling processAttribute()
- Pre-processing attribute Format
- Attribute Format is neither a schema type nor namespace, calling processAttribute()
- Pre-processing attribute SPNameQualifier
- Attribute SPNameQualifier is neither a schema type nor namespace, calling processAttribute()
- Pre-processing attribute {http://www.w3.org/2000/xmlns/}samlp
- {http://www.w3.org/2000/xmlns/}samlp is a namespace declaration, adding it to the list of namespaces on the XMLObject
- Unmarshalling other child nodes of DOM Element {urn:oasis:names:tc:SAML:2.0:protocol}NameIDPolicy
- Unmarshalling child elements of XMLObject {urn:oasis:names:tc:SAML:2.0:protocol}AuthnRequest
- Unmarshalling child element {urn:oasis:names:tc:SAML:2.0:protocol}RequestedAuthnContextwith unmarshaller org.opensaml.saml2.core.impl.RequestedAuthnContextUnmarshaller
======
From topics I found using google, I understood that this attribute is not required, and that I should "suppres" it from the request.
Now here come my question, how do you suppress this? I assume I would need to add some information to the idp-extended.xml file that indicates to exclude this attribute (SPNameQualifer) from the authrequest. But unfortunately I'm unable to find this infomation.
Any help, tips are appreciated. I'm sure somewhere this information is stored, but I'm unable to find it.
Many thanks
Peter Daalder
Edited by: user11240309 on 13-apr-2011 1:29

I would like to perform similar action too.
Anyone know how to remove the "standalone" attribute?
Thanks.

How to remove data guard broker configuration when ORA-16625?

I setup data guard broker for a standby database. However, we recreate the database and re-setup the standby database. But find the earlier broker configuration still exists. But I cannot remove or disable the configuration or any database within the configuration. When I try to do so I got the error, although all network settings are correct:
Error: ORA-16625: cannot reach the database
How to remove the configuration at this stage?
Thanks for help,

Hi, I saw same issue when doing switchover testing in my lab environment.prerequisite is primary role and standby role switched and og can be applied without data guard broker.
Here is the step I resolved the issue
1)on both primary and standby database
SQL> alter system set dg_borker_start=false;
on primary DB:
SQL>alter system set dg_broker_config_file1='?/dbs/dr1afterswichoverpry.dat';
SQL>alter system set dg_broker_config_file1='?/dbs/dr2afterswichoverpry.dat';
on standby DB:
SQL>alter system set dg_broker_config_file1='?/dbs/dr1afterswichoverstby.dat';
SQL>alter system set dg_broker_config_file1='?/dbs/dr2afterswichoverstby.dat';
2) enable dg_borker_start on both primay and sandbby db
SQL> alter system set dg_borker_start=true;
3)on primary database to create configuration
Hope this can help you!
email: [email protected]

How do i know if my iphone has been syncronize with other device and how to remove it.?, how do i know if my iphone has been syncronize with other device and how to remove it.?thanks

how do i know if my iphone has been syncronize with other device and how to remove it.?, cuz. I had found out that one of my co-work who was updatinng my phone was syncronizing to his name..in this case my photos is been syncronize to his acount.pls help...
thanks

Hey Cherielly,
Thanks for using Apple Support Communities.
Since you are having an issue with syncing to a different apple id. You may want to make sure you are signing in with the correct apple id.
iOS: Sign in with a different Apple ID in the iTunes Store, App Store, and iBooks Store
http://support.apple.com/kb/ht1311
Have a nice day,
Mario

How to remove the HDD passwordon Portege R500?

Hello,
do you know how to remove HDD password? I know current password, but if I try to remove it by changing from current password to blank password it doesn't work.
There is still current password.
Thanks

Hi
I hope you are using the correct and right HDD password because its needed to remove and to delete the existing HDD password.
If you would forget the HDD password then the HDD would be locked and you would be not able to unlock the HDD!!!
Generally the HDD password can be deleted in the BIOS.
Please ensure that other password would be removed too.
I found a useful forum thread about a similar HDD password issue:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=66386&#66386
According to the info posted by user jonr17 you should firstly ensure that all other passwords like BIOS, User and Supervisor passwords are removed.
Then try to remove the HDD password from the BIOS.
Bye

How to remove empty space in CSS table and move spry menu bar?

Hello! I created www.stonecreekha.com about a year ago basically by watching youtube tutorials and haven't done much with it since so I've forgotten everything! In IE7, everything appears as it should; but in Firefox and IE8, the spry menu bar is positioned slightly higher than it should be (it slightly cuts off the foot of the golfer) and there is an empty space between the navigation bar and the photo. The source code can be viewed from the website. Here are some pics:
IE7 - how it is supposed to look:
IE8:
Firefox:
Dreamweaver:
So basically, I need to know how to remove that empty space between the navigation bar and the picture, and how to move the spry menu bar down a few pixels, in a way that it looks correct in IE8 and Firefox, and preferably IE7 as well.
P.S. I'm a noob so if you could be as specific as possible on what to do in Dreamweaver I'd really appreciate it. Thanks

I belive it's because of the -minus margin being used on the navbar, that you will need to use a negative margin to bring up both the left and right bodyArea divs.
Try : margin-top: -18px; on both divs. You may need to play around with that to get it more precise.
Again, not sure what effect that has on IE as I can't test it.
If it affects IE, then you may need to feed IE a conditional comment for the placement of those divs.

How to remove an arc correctly?

Similar Messages

Maybe you are looking for