How to remove annoying "Accessory Connected" screen - NO JAILBRAK!

I have accidentally discovered a way to disable the annoying "Accessory Connected" screen that surfaces when connected to some "bad" car radios. To make the change you need access to a "good" music accessory that does not trigger the "Accessory Connected" screen - eg a Bose boombox or a car with a radio that works properly.
1. Connect phone to the "good" accessory and start some music playing
2. Lock the phone with the top button while still connected to the "good" accessory
3. Disconnect the phone from the good accessory (don't stop the music, or anything - just unplug it)
4. Now go to the "bad" accessory and plug it in.
5. Unlock the phone - et voila - no more "Accessory Connected" screen!
As I say, I have not tested this rigorously and I am not 100% sure that I have correctly described what I accidentally did to get it to work. All I can say is that I can now plug my phone into any car stereo without getting that annoying screen!

If you want to edit an iTS music purchase you will have to burn an audio CD of the DRM protected tunes then import again as an mp3/mp4 and use a program that can edit the file.
You can also use mp3 Trimmer at http://deepniner.net/mp3trimmer or spend bigger $$ and get Peak LE from BIAS. You can also try Audacity http://audacity.sourceforge.net/
MJ

Similar Messages

How do i get rid of the annoying wifi connect screen whenever i am in a mall, it pops up even though i have cancelled it many times and revert to 3g

how do i get rid of the annoying wifi connect screen, even after i have rejected and cancelled using it and revert to 3g?

Actually just turn off "Ask to join networks". Settings -> Wi-Fi -> Ask to Join Networks. This way your wi-fi will still work at home or anywhere that you want to use it but you won't get prompted to join unknown networks.

Why does my 3GS get stuck at the "accessory connected" screen when I connect it to my car via USB?

I realize that the old app is now the music app. I dislike this new app, because an old function is now gone
With iOS 4.3.5, I used to be able to use the the USB hub in my car to charge my iPhone 3GS. It would show the screen that says accessory connected (with the image of an iPod), and then after a few seconds, it would select Hands Free Mode (connect through Bluetooth), and I could browse my music/playlists/etc. Now when I connect my iPhone to my car via the dock connector, all it does is stay at the screen which displays an image of an iPod, and the only action that I have available to me is to choose between dock connector And hands free. I choose hands free, but still, I am no longer free to select which music I want to have playing.
When I disconnect the phone from the USB connection, I am free to select my music, but I must leave it disconnected, because when I reconnect it, the music stops playing, and it goes back to that screen. There isn't even a clear way to get music to start playing on the phone when it is stuck on that screen.
Can the functionality of the music app be restored to that of the old app? I drive a lot, so I charge my phone through the USB connection in my car, and my phone is also my source of music, through the Bluetooth connection (as previously stated). I can no longer charge my phone and select/play music as I once could with 4.3.5 and the iPod application. I don't see anything that i can do from a user's standpoint, however, of anyone can help with this very specific issue, it would be much appreciated.

Try resetting the phone. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.
Seems too early for an iPhone battery to fail. If the problem persists Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.

How to remove fields from Standard Screen

Hi,
I Have faced one problem in screens(se51). When apply one SAP Note i have to change the screen manually(as per Note ) . My requirement is to remove some text fields and label fields. But I cant delete the Fields.
Normally just select the object and Press delete Key to remove one object from screen. But here it is not working.
How can i remove the objects from the screen as per SAP Note.
Thanks in Advance,
WIth Regards,
Neptune.M

Hi,
T.code SHD0 helps you control which fields to appear, suppress and make mandatory in Standard Screen.
refer
https://forums.sdn.sap.com/click.jspa?searchID=4359065&messageID=2961760
Regards

How to remove spaces at selection screen coming from logical database

Hi Experties,
When we hide some selection from the logical database. The spaces still occupied and this make our selection screen looks awkward.
How to remove the spaces left by hidden selection ?
Regards
Nislina

Hi,
I came across your un-answered question while searching for a solution on the similer problem. Though I couldn't fine a solution on SDN, but figured out one myself. Thought its a good idea to share it.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
    IF screen-group4 = '003'.
      screen-active = 0.
      MODIFY SCREEN.
    ENDIF.
ENDLOOP.
Here screen-group4 contains the sequence number of the select-options field starting from 000 onwards.
You may like to assign points and close the question.
Kind Regards,
Khalid Mustafa

How to REMOVE PayPal Smart Connect from PayPal Account

I've been trying to REMOVE the PayPal Smart Connect from my PayPal Account with no luck. I already cancelled my PayPal Smart Connect. I confirmed today that is cancelled but it's linked to my PayPal Account and I don't find a way to REMOVE it. I wrote to PayPal and they told me PayPal Smart Connect are the only one that can remove it, but I call PayPal Smart Connect and the only option I've been given is to CANCEL the account which is already cancelled. Does anyone know how to REMOVE it??

Hi JeyJey,
Welcome to the Community!
Thank you for contacting us here on the community. This is a good question. If your PayPal Smart Connect balance has been paid in full, please reach out to PayPal customer service by phone, email, Twitter, or Facebook. Our representatives will be happy to assist with removing the account.
Thanks,
-Susie

How to remove unused datasource connections in Report Builder 3

In Report Builder 3.0 using a wizard to create a new Report, select create a DataSet. It opens a "Choose a connection to a datasource" dialog box. It shows previously used datasource connections of other ReportSevers I have accessed long
time back. But I dont want to see datasource connection not in use. How can I remove those datasource connections used in past but they are still available in the list.

Hi Saty
You can find more information about Remove previously used datasource connections.
http://connect.microsoft.com/SQLServer/feedback/details/679232/cannot-remove-old-unusable-data-source-connections-from-report-builder-3-0-wizard-dialog
SUHAS http://suhaskudekar.blogspot.com/ Please click "Mark as Answer" if this resolves your problem or "Vote as Helpful" if you find it helpful.

How to remove flicker effect from screens / projections?

Hey,
I wondered if there's an option within Premiere Pro CC ( or AE) to remove flicker effects from screens and projections. I attached a jpg as an example of such a projection. Here is an anti flicker option in Premiere Pro, but it doesn't seem to have an effect on my problem.
Cheers

You need to shoot scenes like that using a camera that allows Synchro-Scan, which can adjust the cameras scanning rate to that of the display in the shot. Any mismatch between camera and siaplay is what causes the flicker, and Synchro-Scan is the only way to correct it without entirely removing the screen from teh shot and replacing it with another, usually via After Effects.

How to remove abandoned db connections

I was reading the tomcat DBCP and happened to see that it offers a property called "removeAbandoned" which removes abandoned db connections.
Does Sun java webserver have something similar to this? I could not see anything similar to this property in the docs

I'm a little bit worried that a member of the Sun Forums Team is asking a question like that :P

How can remove "MMS" Internet Connection

Hi, any one can help me I had installed fMMS and it also created "MMS" Internet connection. Then I had uninstalled fMMS but the MMS internet connection still exists. How can I remove this ?
Thanks
Solved!
Go to Solution.

matthew_maude wrote:
download fAPN, and use that
And here is the link to it at maemo.org:
http://maemo.org/downloads/product/Maemo5/fapn
If you found this post helpful, please click on the green "Kudos!" star. Cheers!

How to remove annoying POPUPS ON STARTUP C:\Windows\System32\igfxtray.exe

Hi -
After I on intel.com tried to upgrade my graphic driver Mobile Intel(R) 965 Express Chipset Family my screen at startup shows a popup-box with the text:
C:\Windows\System32\igfxtray.exe
I am asked to "Run" or "Cancel" but no matter what I choose the exact same popup is shown on startup again and I have to Click 3 times on Cancel to get the box disappear - It doesnt seem to influence on my use of the laptop but its a little annoying that its shows up.
On windows.com help forum I have followed some suggestions without help except the suggestion on open Regedit because many have told med not to mess around in the Regedit
I have with no succes asked this question on a forum within intel.com
Has anyone a suggestion what to do?
Thanks in Advance
DonOlesen

Hi
The igfxtray.exe seems to belongs to Intel driver and this file is a part of quick access software to the control panel via a System Tray icon for graphics based upon the Intel.
Usually you should see a small Intel display icon in the task bar in the right lower corner.
The igfxtray.exe controls this.
So you can also disable this in msconfig.
In search type msconfig. Then choose StarUp tab and choose remove the mark from the entry containing the igfxtray.exe
Now save the changes and reboot the unit
That should disable this popup.

How to remove the print popup screen from module pool program

Hi,
In my project i am having one module pool program in which 7-8 screens are there.
In the initial screen after entering the equipment number when i am executing the program then after loading second screen
it is showing one screen is coming which is asking to print the content of the page.
I want to remove this screen (printing popup) but i am not able to get the code or setting for it.
Please help me to solve this problem.
Thanks and regards.

I think this is more to do with ABAP than EP so, the corresponding sections of forum could prove more helpful on this...
Thanks,
H

HOW TO REMOVE ANNOYING APPLAUSE

I downloaded 10 songs that have a lot of applause, which is very jarring as they are peaceful songs, interrupted by cheering and applause. I would like to remove it completely from all playback, and before I burn CDs. I found something called "gapless playback" on an internet site, but can find no instructions in ITUNEs as to how to use it. Can someone help me edit these songs into what I thought I was buying--just the music?

If you want to edit an iTS music purchase you will have to burn an audio CD of the DRM protected tunes then import again as an mp3/mp4 and use a program that can edit the file.
You can also use mp3 Trimmer at http://deepniner.net/mp3trimmer or spend bigger $$ and get Peak LE from BIAS. You can also try Audacity http://audacity.sourceforge.net/
MJ

How to remove superglue from LCD screen of Macbook Pro?

I know this sounds ridiculously stupid. Unfortunately, I somehow managed to get superglue on my mom's Macbook screen. Theres two droplet sized marks near the center and I feel really bad. Is there any possible solution below changing the entire screen?

Acetone, is what breaks down super glue, use it on a q Tip and try to absorb it of the screen (dab),( this may take a few times to get it all) do not rub! First try it or the lacquer thinner Shootist mentioned, but try it in the corner of the screen first to make sure it will not cause damage. After it is removed use a screen cleaner with a micro fiber cloth such as Clean it, or an eyeglass cleaner that is safe for glasses with treated lenses. MAKE SURE TO HAVE THE COMPUTER TURNED OFF! Also support the screen from behind and use minimal pressure. Good Luck.

How to remove annoying system-wide echo?

I've recently installed some audio apps, (Boom, Audio Hijack Pro, Piezo) and now I have this annoying echo that seems to be caused by some audio device.
I came to that conclusion after hooking up my headphones and hearing everything normally (it's also normal when sound comes from internal speakers)
Help, please.

I'm so embarrassed right now, I just noticed that I accidentaly pressed the "surround" button on my speakers.
I honestly didn't noticed it before and it has been like two days.
Thanks a lot,though, for your speedy reply.

How to remove annoying "Accessory Connected" screen - NO JAILBRAK!

Similar Messages

Maybe you are looking for