How to remove application name label in dock

Anyone know how to disable the app name labels from the docked apps on a mac? I know there's a way to achieve this by fiddling with plist files in the developer options, but i was hoping there was an easier switch to do this. Juts want to turn it off for all docked apps, or all apps, don't care. Thanks.

Not so fast! After doing what I described and having the empty bar disappear it returned. I've gone through the same routine a few times and the bar returns after a few shut downs aand status of my computer. Any suggestions?

Similar Messages

How to remove service names

One thing about oracle that I am unable to understand is that when we uninstall oracle, all the service names for its different services stay there in the services section in WindowsXP. I know how to remove the instance name services, but I am unable all the other services. Does anyone know how to remove all those services?

a launch daemon should normally have a .plist extension. did you skip it? that would explain why the command gives an error.
the command you are using is basically correct. you don't need sudo because the daemon is in your home directory. also, to unload it so that it doesn't load automatically on the next login you should use -w switch. this will add a 'disabled' flag to the daemon. the syntax is
launchctl unload -w /path/to/daemon
However, as others have said the best thing is to trash the daemon and log out/in. you don't need it for anything as you've removed the application that created it.

Faded Name Labels in Dock Icons

Periodically, the grey background in all of the Dock icons' name labels all but fade, making the names difficult to read. The problem goes away if I reboot, but eventually returns.
Any ideas?

Yep. I think you've got a corrupted system. I'd recommend a reinstall. You might try the following:
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

How to remove responsibilty name custom oaf page

Hi,
Can any one please help me how to remove the responsibility name custom oaf page.
i developed custom oaf page.while opening those pages responsibility name is also displyed.
but i dont want to be displayed responsibility name in page.
Please help me how to remove name of the responsibility in oaf page.

Hey hi there ,
I think you are trying to hide the Product branding that appears right next to the corporate image ( Oracle image ) ,
well you can do this using controller code , in processRequest of your controller add this code
Import :
import oracle.apps.fnd.framework.webui.beans.layout.OAPageLayoutBean;
import oracle.apps.fnd.framework.webui.OAFormattedTextHelper;
import oracle.apps.fnd.framework.webui.beans.OAFormattedTextBean;
OAFormattedTextBean bean =
(OAFormattedTextBean)createWebBean(pageContext, FORMATTED_TEXT_BEAN,null,"product_brand");
bean.setText(" ");
OAPageLayoutBean page = pageContext.getPageLayoutBean();
page.setProductBranding(bean);
Once you compile and run the page notice that Product branding will no longer appear on the screen .
Try this and let me know if its not working .
--Keerthi

How to remove a name from the pop up screen when you type in a letter

I stopped in the apple store today and stumped the genius bar !!!!!!
I am so proud.
I want to know how to remove e-mail address's that pop up when you hit a alpha key.
These are address's that are NOT in my address book or anywhere on my computer.
They would be a one time e-mail that I sent over the last 3 years or so.
I do not retain old e-mails either which would trigger keeping the address alive.
Thanks,
Greg

In Mail, you can also select a popped-up name that you don't want to retain, click the triangle that appears when you move your cursor to the area just after your name, and select "Remove from Previous Recipients List" from the dropdown menu. This choice will not appear if the name is in your Address Book.

How to remove applications from "Selected applications" list?

I know how to delete applications from my iPhone 3G. I also understand that when I sync they will get restored on my phone if I have "Sync applications" checked and I choose the "All applications" radio button. If I want applications to "stay deleted," I need to choose the "Selected applications" radio button and make sure the ones I want to stay gone are un-checked.
How do I "fully delete" an application, so it is both (a) no longer on my phone and (b) no longer in the "selected applications" list?
Thanks!

Simple go to where it has your applications in the Application menu (not tab in iPhone sync options, but the menu on left) and delete it from there.
Say keep file when it asks if you want to delete it from your hard-drive if you at least want to keep it on your drive.
In summary, just remove it from iTunes but keep the file. Or if you want to fully get rid of it, let it delete it from drive too. Remember, you can always re-download and even if you paid for it, it will discover you already bought it and say you can re-download for free.

How to remove application completely?

Hello!
I've just found some leftovers of an application I thought I have uninstalled. I tried to delete everything connected to the Cloud application I've had installed, including everything linked to it in the Library/SystemPreferences, but this is still here: https://www.evernote.com/shard/s287/sh/22ae3d46-5b47-4625-9f7d-59e6da55e42f/5947 b284f2dab2fb5fed7cde49c924f2
It's in the System Preferences - Users & Groups.

Select the item in that list then click on the Delete [-] button.
For future reference:
Uninstalling Software: The Basics
Most OS X applications are completely self-contained "packages" that can be uninstalled by simply dragging the application to the Trash. Applications may create preference files that are stored in the /Home/Library/Preferences/ folder. Although they do nothing once you delete the associated application, they do take up some disk space. If you want you can look for them in the above location and delete them, too.
Some applications may install an uninstaller program that can be used to remove the application. In some cases the uninstaller may be part of the application's installer, and is invoked by clicking on a Customize button that will appear during the install process.
Some applications may install components in the /Home/Library/Applications Support/ folder. You can also check there to see if the application has created a folder. You can also delete the folder that's in the Applications Support folder. Again, they don't do anything but take up disk space once the application is trashed.
Some applications may install a startupitem or a Log In item. Startupitems are usually installed in the /Library/StartupItems/ folder and less often in the /Home/Library/StartupItems/ folder. Log In Items are set in the Accounts preferences. Open System Preferences, click on the Accounts icon, then click on the LogIn Items tab. Locate the item in the list for the application you want to remove and click on the "-" button to delete it from the list.
Some software use startup daemons or agents that are a new feature of the OS. Look for them in /Library/LaunchAgents/ and /Library/LaunchDaemons/ or in /Home/Library/LaunchAgents/.
If an application installs any other files the best way to track them down is to do a Finder search using the application name or the developer name as the search term. Unfortunately Spotlight will not look in certain folders by default. You can modify Spotlight's behavior or use a third-party search utility, EasyFind, instead.
Some applications install a receipt in the /Library/Receipts/ folder. Usually with the same name as the program or the developer. The item generally has a ".pkg" extension. Be sure you also delete this item as some programs use it to determine if it's already installed.
There are many utilities that can uninstall applications. Here is a selection:
    1. AppZapper 2.0.1
    2. AppDelete 3.2.6
    3. Automaton 1.50
    4. Hazel
    5. AppCleaner 2.1.0
    6. CleanApp
    7. iTrash 1.8.2
    8. Amnesia
    9. Uninstaller 1.15.1
10. Spring Cleaning 11.0.1
For more information visit The XLab FAQs and read the FAQ on removing software.

How to remove application

how i can find application system preferences other

If you want System Preferences click the Apple menu and then the System Preferences bar.
If you want an applications preferences click on the applications name menu and selct the preferences bar or use the commant , keys.

How to remove application icon from launcher..

I want to remove application icon from launcher..
So, i removed tag <category android:name="android.intent.category.LAUNCHER"/> in intent-filter..
<application android:enabled="true">
          <activity android:excludeFromRecents="false">
                    <intent-filter>
                              <action android:name="android.intent.action.MAIN"/>
                    </intent-filter>
          </activity>
</application>
but it's not work.. occur installing below error..
3496 KB/s (42965 bytes in 0.012s)
        pkg: /data/local/tmp/AirTest.apk
Failure [INSTALL_PARSE_FAILED_MANIFEST_MALFORMED]

I have same problem with you but I haven't find an answer for that. Did you have your answer for the problem?
Thanks!

How to get application names currently running on Windows?

Hi Experts,
Please help me how do I get application names (tasks) currently running (as shown in Windows Task Manager-Application Tab) in Windows.
Thanks,
Deepak

Hi....
probably it's a unusual solution but you could try it....
Create a *.bat file call it test.bat .. Create it on your local machine or on your server folder..
PARAMETERS: DOSCMD(30) DEFAULT 'c:\test.bat' LOWER CASE.
call function 'GUI_EXEC'
exporting
command = DOSCMD.
Inside your test.bat file put this code..(it's a dos command to create a txt file containing the output of tasklist.exe command
tasklist > c:\test.txt
In your test.txt file you will have a list of tasks running on windows...
Hope to help...
bye...

How to change application name i iPad 2?

How can i change an application name in my ipad2?

You can't change the name of any of the apps on the iPad - you can only change the names of app folders on the iPad or the name of the iPad as it appears on the left-hand side of your computer's iTunes, but you can't rename any of the apps.

How to remove applications

Hi everyone, I am new to using iPhone. I have installed a number of applications into my iPhone and I need to remove some of these applications.
Could someone help me by letting me know how to uninstall applications from iPone?
Regards
cbneo

The User Guide explains everything:
http://manuals.info.apple.com/en/iphoneuserguide.pdf
*To remove an App Store application from your device:*
1) Touch and hold any application icon on the Home screen until the icons start to wiggle.
2) Tap the "x" in the corner of the application you want to delete.
3) Tap Delete to remove the application and all of its data from your iPhone or iPod touch.
4) Press the Home button to save your arrangement.

How to remove sender name in field "From" in Notification page

I would like to remove name ( LIUNI, ANTONIO_ ) (bold text and underline) from message and field "From" in notification page.
I have 2 problems below:
1.) This message "_*LIUNI, ANTONIO*_ has completed their appraisal of KERINS, ANNE MARY"
Should change to "A multirater has completed their appraisal of KERINS, ANNE MARY"
2.) Field From, must be blank: From: LIUNI, ANTONIO_ -> From: <Blank>
It call standard workflow HRSSA.
Please provide me coding in controller to set item attribute values in field "From" to blank and remove sender name in message+
Below is the example notification:
This notification does not require a response.
LIUNI, ANTONIO_ has completed their appraisal of KERINS, ANNE MARY.
Personalize "Notification Details Function"
Personalize "Notification Details Attributes"
Personalize Table Layout: (leftTable)
From LIUNI, ANTONIO_
To BILLOUD, CLAIRE
Sent 26-Apr-2010 09:53:06
ID 66666475
Personalize Stack Layout: (rightStack)
Personalize Table Layout: (rightTable)
Personalize Stack Layout
Personalize Stack Layout
Personalize "Summary"
Edited by: jamras on Apr 26, 2010 1:34 AM

Thank you for your reply.
Do you mean region in notification page?
Below is region in notification page.
Field From is in Region: /oracle/apps/fnd/wf/worklist/webui/NtfDetailsAttr.leftTable
Document Name /oracle/apps/fnd/wf/worklist/webui/NtfDetailsAttr
Message is in Region: Notification Details Function
Document Name /oracle/apps/fnd/wf/worklist/webui/NotifDetailsRG
Now I'm working on extension controller in the page below (I'm submit button in this page).
/oracle/apps/per/selfservice/appraisals/webui/PartCompletePG
My controller -> fao.oracle.apps.per.selfservice.appraisals.webui.FaoPartCompleteCO
I put the following coding in this controller. It removed value in workflow attribute, but it didn't remove value from notification page.
SSHRParams sshrparams = new SSHRParams(oapagecontext.getRootApplicationModule());
String wfItemType = sshrparams.getItemType();
String wfItemKey = sshrparams.getItemKey();
// String wfProcess = "HR_APPRAISAL_DETAILS_JSP_PRC"; ///sshrparams.getProcesName().toString();
wfClass.setItemAttrText(oapagecontext, wfItemType, wfItemKey,
"HR_APPRAISAL_FROM_USER_ATTR", "");
wfClass.setItemAttrText(oapagecontext, wfItemType, wfItemKey,
"FORWARD_FROM_USERNAME", "");
wfClass.setItemAttrText(oapagecontext, wfItemType, wfItemKey,
"FORWARD_FROM_DISPLAY_NAME", "");
wfClass.setItemAttrText(oapagecontext, wfItemType, wfItemKey,
"FORWARD_FROM_PERSON_ID", "");
wfClass.setItemAttrText(oapagecontext, wfItemType, wfItemKey,
"HR_APPRAISAL_FROM_NAME_ATTR", "");
Thank you for your help.

How to get application name from a receive location?

Hi all,
I am trying to do a custom error application, and I want to notify system admin users that "the receive port XXXX has stopped in application YYYYYY".
Right now I do know which receive location that is being suspended. But I am not being able to get the application name, associated to this receive location (I can also get the ReceivePort, if it matters).
I've tried 2 ways:
> using WMI
> Using SQL (direct query in BizTalk databases - for testing).
I did not found any solution, even search table by table, i did not found a relation between Applications and receive location..
Anyone?
Thanks in advance
Ricardo Bessa

The following SQL query should give you a result of every disabled receive location as well as it's receive port and application:
SELECT
RL.Name AS ReceiveLocationName
, RP.nvcName AS ReceivePortName
, APP.nvcName As Application
FROM [BizTalkMgmtDb].[dbo].[adm_ReceiveLocation] AS RL WITH(NOLOCK)
INNER JOIN [BizTalkMgmtDb].[dbo].[bts_receiveport] AS RP WITH(NOLOCK)
ON RL.ReceivePortId = RP.nID
INNER JOIN [BizTalkMgmtDb].[dbo].[bts_application] AS APP WITH(NOLOCK)
ON RP.nApplicationID = APP.nID
WHERE
RL.[Disabled] = -1
ORDER BY Application ASC
Christian @ IntegrationAdmin.com

How to get Application name of a current running process in LiveCycle??

Hi,
I want to get the Application name of current running process in LiveCycle as a output value.
I have 3 applictions, the 3 applications are calling same SubProcess, so I want get the name of the application from which the sub process has been called.
I want to retrieve the Application name and asssign this value to a output variable.
I have searched for the solution I found a method getApplicationName() but inorder to get the current running process's Application Name this might not be useful..
So suggest the way to resolve this..
Thanks in Advance.....
Regards,
Kalyan Urimi

Use an input/output string variable in the subprocess and set its value in each calling process as respective Application name.
May be if this could help.
Thanks,
Wasil

How to remove application name label in dock

Similar Messages

Maybe you are looking for