How to remove arrow pointer in painting tool circle?
I'm running Adobe Photoshop 7.0 in Windows 7 Virtual XP mode, since the program won't run in Win7 64-bit mode. It used to run fine in 32-bit mode. It runs OK in the virtual XP mode, but I find that the circle tool in the painting or clone stamp functions always has an arrowhead in the center of the circle. It never used to, just the circle for painting or cloning. How do I get rid of it? Changing the settings in the Preferences menu does not help.
Also, the virtual mode doesn't seem to allow updating program files, although it updates XP files. Maybe there is a firewall issue? I tried to download a Photoshop update file. There was a prompt asking where it should go. But when I selected a place, and clicked OK, the Next button did not come on.
Thanks in advance for any suggestions.
BK
Noel,
Thanks for your response. I was only joking.
As far as the virtual XP mode goes: I wasted a lot of time with Adobe techies – in India and elsewhere – first, trying to get an unlock code to install the Photoshop 7 on my new hard disk, then when it booted up, the program would not initialize. I just get an error message, saying “Photoshop 7.9 could not initialize because your scratch disks are full.” Then it shuts down. This, after I have a 1.5 TB size new main drive.
Unless you have any ideas on how to get around this bad penny initialization error message, I am stuck. It does work in XPM mode, though. Although I was able to change the screen resolution to remove the mouse pointer in the circle tool, now the tool is the cursor that looks like a small oval over which crosshairs are placed. I can’t seem to get a normal, single circle. Is there a switch that restores cursors to a default?
Barrett Kalellis
Similar Messages
-
How to remove links pointing to the same page?
I have PDF documents with Links which point to sections referenced (e.g. link of text "Section 2.2" points to the actual page number of "Section 2.2"), but as the links are created from cross-references during rendition from Word to PDF, there are cases that the destination page number and source page number of the links are the same (e.g. links of text "Section 2.2" on page 9 are created with the destination of page 9 which is the actual page number of "Section 2.2"), I want to remove all these links, but I don't know how to get the destination page, I check the API reference and find that "PDLinkAnnotGetAction" may work , but I don't know how to use it, could you check me codes below and advise ? Your help is really appreciated!
PDPage page;
ASInt32 i,i2;
AVDoc avDoc = AVAppGetActiveDoc();
PDDoc pdDoc = AVDocGetPDDoc (avDoc);
int pageNum = PDDocGetNumPages(pdDoc);
for (i = pageNum - 1; i >= 0; i--)
page = PDDocAcquirePage(pdDoc, i);
int annotNum = PDPageGetNumAnnots(page);
for (i2 = annotNum - 1; i2 >= 0; i2--)
if...
PDPageRemoveAnnot(i, i2);
My Product Information:
Acrobat Pro 8.1.6, WindowsStart by reading the PDF standard (ISO 32000-1) to understand Actions vs. Destinations.
Then for each annot, you'll want to see which it has (and in the case of an Action, if it has more than one). Then you need to parse the action or dest to see what it is and where it goes. If you don't like it, then you'll delete it.
From: Adobe Forums <[email protected]<mailto:[email protected]>>
Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
Date: Tue, 25 Oct 2011 09:25:32 -0700
To: Leonard Rosenthol <[email protected]<mailto:[email protected]>>
Subject: How to remove links pointing to the same page?
How to remove links pointing to the same page?
created by OALD<http://forums.adobe.com/people/OALD> in Acrobat SDK - View the full discussion<http://forums.adobe.com/message/3989576#3989576 -
How to remove random icons in Finder tool bars...
How do I get rid of these things? My finder windows all have, in addition to the normal items, the poster art for an MP4 file I haven't watched in weeks, a question mark and the icon for an app I rarely use. When I normally click on the MP4 it opens the movie in QuickTime, on the question mark it tells me the item cannot be found and the app icon opens the icon. When I left click on any of them, I'm only given the options to make all my tool bar items tiext, text and icons or customize my tool bar but in the customize option there is no way to remove the MP4, question mark or app icon. Why are they there and how can I get rid of them?
Dominic,
Why would you bother to take the time to respond to a question you refuse to answer? If searching relating items had proven useful, I would not have posted my question. Why do you waste your own and everyone else's time posting completely unhelpful responses? What do you get out of that? Why are you trolling a board which mainly exists for problem solving if you have no interest in solving any problems? What's wrong with you?
Best. -
How to change decimal point in Rotate Tool.
Hi,
I use the rotate tool to design gauges, like clocks, a lot. I hold the ALT button and click on the center of my drawing and then a window pops up to enter in what degree I want my object to be. Currently the decimal point only allows for hundredths, ex. 45.25 degrees. Is there any way to change this to thousandths or even higher, ex. 45.25125? I've attached a screenshot to show you what I mean.
Any help would be appreciated!
Thanks,
LauraLaura Belle,
When you enter the full decimal value, that should give you the right rotation whatever the truncated value is.
At least I hope that is still the case in your version.
You may test it as follows:
1) Create a square with W = H = 100;
2) Rotate thrice, each time inserting 33.333333 degrees, then rotate by -100 degrees;
3) Look at the W and H values;
4) Repeat 1) - 3), only with 33.33 degrees and see what you get.
You should get W = H = 100 in 3) and something like 100.017 to 100.018 in 4). -
How to remove an icon from customize tool bar
I deleted an icon fromtool bar. I then opened up "customize toolbar" to see if I could remove this icon but it was not moving. Is there a way to remove this icon from my customize tool bar?
I am on OS X Yosemite.Try clicking and holding the icon while holding the command key down. Drag it from the toolbar.
-
How to remove apple logo frozen with loading circle on phone
i cant remove apple logo i tried to reset phone pushing for ten sec and now it wont do anything just loading circle bar somtimes moves i have it on the charger when i connect to comptuer my computer is unable to find harware its like this for a week now on the charger frozen
Try to force your phone into recovery mode. Disconnect it from the computer's USB cord. Turn it off if you can by holding the sleep/wake switch until you see the red slide to off. If you can't turn it off, please continue. Press and hold the home button while plugging it into the computer's USB cord. Continue holding the Home button while iPhone starts up. While starting up, you will see the Apple logo. When you see "Connect to iTunes" on the screen, you can release the Home button and iTunes will display the recovery mode message. http://support.apple.com/kb/HT1808
Then you can restore your phone: http://support.apple.com/kb/HT1414 -
Hi,
how to remove decimal points from all the columns in table in obiee
thankshi
add one decimal point
is this the same? or any?
Cheers -
Win32 - how delete some Region points?
i have 1 Region:
HRGN hRgn = CreateRectRgn(0,0,wBmpWidth,wBmpHeight);
heres how i remove some points:
if (pixelcolor==backcolor)
SetWindowText(ActivatedForm,"match");
// remove transparent color from region
hTmpRgn = CreateRectRgn(x,y,x+1,y+1);
CombineRgn(hRgn, hRgn, hTmpRgn, RGN_XOR);
DeleteObject(hTmpRgn);
i belive that the CombineRgn() isn't right, because the points aren't removed :(
what can advice me?finally it's working:
BYTE* Get24BitPixels(HBITMAP pBitmap, WORD *pwWidth, WORD *pwHeight)
// a bitmap object just to get bitmap width and height
BITMAP bmpBmp;
// pointer to original bitmap info
LPBITMAPINFO pbmiInfo;
// bitmap info will hold the new 24bit bitmap info
BITMAPINFO bmiInfo;
// width and height of the bitmap
WORD wBmpWidth, wBmpHeight;
// get some info from the bitmap
GetObject(pBitmap, sizeof(bmpBmp),&bmpBmp);
pbmiInfo = (LPBITMAPINFO)&bmpBmp;
// get width and height
wBmpWidth = (WORD)pbmiInfo->bmiHeader.biWidth;
wBmpWidth -= (wBmpWidth%4); // width is 4 byte boundary aligned.
wBmpHeight = (WORD)pbmiInfo->bmiHeader.biHeight;
// copy to caller width and height parms
*pwWidth = wBmpWidth;
*pwHeight = wBmpHeight;
// allocate width * height * 24bits pixels
BYTE *pPixels = new BYTE[wBmpWidth*wBmpHeight*3];
if (!pPixels) return NULL;
// get user desktop device context to get pixels from
HDC hDC = GetWindowDC(NULL);
// fill desired structure
bmiInfo.bmiHeader.biSize = sizeof(BITMAPINFOHEADER);
bmiInfo.bmiHeader.biWidth = wBmpWidth;
bmiInfo.bmiHeader.biHeight = -wBmpHeight;
bmiInfo.bmiHeader.biPlanes = 1;
bmiInfo.bmiHeader.biBitCount = 24;
bmiInfo.bmiHeader.biCompression = BI_RGB;
bmiInfo.bmiHeader.biSizeImage = wBmpWidth*wBmpHeight*3;
bmiInfo.bmiHeader.biXPelsPerMeter = 0;
bmiInfo.bmiHeader.biYPelsPerMeter = 0;
bmiInfo.bmiHeader.biClrUsed = 0;
bmiInfo.bmiHeader.biClrImportant = 0;
// get pixels from the original bitmap converted to 24bits
int iRes = GetDIBits(hDC,pBitmap,0,wBmpHeight,(LPVOID)pPixels,&bmiInfo,DIB_RGB_COLORS);
// release the device context
ReleaseDC(NULL,hDC);
// if failed, cancel the operation.
if (!iRes)
delete pPixels;
return NULL;
// return the pixel array
return pPixels;
HRGN ScanRegion(HBITMAP pBitmap,COLORREF clrTransparent )
BYTE jTranspR = GetRValue(clrTransparent), jTranspG=GetGValue(clrTransparent), jTranspB=GetBValue(clrTransparent);
// bitmap width and height
WORD wBmpWidth,wBmpHeight;
// the final region and a temporary region
HRGN hRgn, hTmpRgn;
// 24bit pixels from the bitmap
BYTE *pPixels = Get24BitPixels(pBitmap, &wBmpWidth, &wBmpHeight);
if (!pPixels) return NULL;
// create our working region
hRgn = CreateRectRgn(0,0,wBmpWidth,wBmpHeight);
if (!hRgn) { delete pPixels; return NULL; }
// scan the bitmap
DWORD p=0;
for (WORD y=0; y<wBmpHeight; y++)
for (WORD x=0; x<wBmpWidth; x++)
BYTE jRed = pPixels[p+2];
BYTE jGreen = pPixels[p+1];
BYTE jBlue = pPixels[p+0];
if ((jRed == jTranspR && jGreen == jTranspG && jBlue == jTranspB))
// remove transparent color from region
hTmpRgn = CreateRectRgn(x,y,x+1,y+1);
CombineRgn(hRgn, hRgn, hTmpRgn, RGN_XOR);
DeleteObject(hTmpRgn);
// next pixel
p+=3;
// release pixels
delete pPixels;
// return the region
return hRgn;
if(inst->blnTransparent==true)
TransparentBlt(test.hdc,0,0,imglabel.width(),imglabel.height(),imglabel,0,0, imglabel.width(),imglabel.height(), inst->clrBackColor);
inst->LabelRegion=ScanRegion(imglabel, inst->clrBackColor);
SetWindowRgn(inst->hwnd,inst->LabelRegion,TRUE);
else
SetWindowRgn(inst->hwnd,NULL,TRUE);
BitBlt(test.hdc,0,0,imglabel.width(),imglabel.height(),imglabel,0,0,SRCCOPY);
inst is the subclass pointer;
imglabel is the image class object.
maybe you can't see the diference... sorry. but works fine now.
thanks for all -
i have songs in my music i did not download, they have a cloud with a arrow pointing down. how do i delete them?
What songs are they ? If it's the U2 Songs of Innocence album then that was given free to everyone a couple of months ago - you can remove it from your account if you don't want it : http://itunes.com/soi-remove
But the cloud icon means that those songs are in the cloud, not on your phone. You can turn off the showing of all cloud music via Settings > iTunes & App Stores > Music (under the 'show all' heading) 'off'. Or you can hide individual tracks and/or albums via your computer's iTunes so that they don't show in the cloud : iTunes Store: Hiding and unhiding purchases -
"if for some reason u have the icon in your task bar (the one with 2 arrows pointing in a circle) just go into mobile me pref...click sync...and uncheck box show status in menu bar."
I do not have the option box to "show status in menu bar"
I tried the free for a little while Mobile me, and didn't use it, so cancled. I cannot get the sync status roundabout arrows out of my status bar. AND, they keep trying to sync.
Another issue related with this is that during the time that I tried out Mobile me, I had my ical alarm set to go off every 2 hours. NOW my computer has an ical pop-up every 2 hours. I cannot find how to stop it.
Another issue, Yahoo is trying to sync with my computer and I have no idea why or where that one came from.
Can anyone out there help me please."if for some reason u have the icon in your task bar (the one with 2 arrows pointing in a circle) just go into mobile me pref...click sync...and uncheck box show status in menu bar."
I do not have the option box to "show status in menu bar"
I tried the free for a little while Mobile me, and didn't use it, so cancled. I cannot get the sync status roundabout arrows out of my status bar. AND, they keep trying to sync.
Another issue related with this is that during the time that I tried out Mobile me, I had my ical alarm set to go off every 2 hours. NOW my computer has an ical pop-up every 2 hours. I cannot find how to stop it.
Another issue, Yahoo is trying to sync with my computer and I have no idea why or where that one came from.
Can anyone out there help me please. -
I read the article on how to remove Bing; however, it does not show up on my list of installed programs and it does not show up in the list of extenstions under "Tools" and "Addon" yet it is installed as an extention to the right of the addlress line. It is not my home page. Help!!!
See also:
*https://support.mozilla.com/kb/Removing+the+Search+Helper+Extension+and+Bing+Bar
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
*http://kb.mozillazine.org/Resetting_preferences -
How can I use some of the image i am working on to paint with? like if I wanted to give someone an extra eye in the forehead, ow could i then paint their own i in the forehead? I know there is a paint tool for that, i just can't find it ... :/
It sounds like you are talking about the cloning tool?
Tool looks like this:
Then when selected you can change the size of the brush and using Alt (windows) and Command (Mac) to select your region you want to copy then start to create you cloned image.
Hope this helps? -
My Ipod is stuck with a picture of a USB chord with an arrow pointing to an itunes logo....what is this and how do I fix it? I did look at the "printers and devices" section on my computer. It shows an un identified "apple" device that is in "recovery mode" but that is. I tried to trouble shoot it there but no help....
Connect to iTunes on the computer you usually Sync with and “ Restore “...
http://support.apple.com/kb/HT1414
If necessary Place the Device into Recovery mode...
http://support.apple.com/kb/HT1808 -
I got a 8gig ipod touch from a freind and all I get on the screen is a usb plug with an arrow pointing towards the itunes logo. How do I resolve this? I don't know what operating system it runs, or what year it was manufactured, it is a chrome one.
http://support.apple.com/kb/TS1369
There have been some problems accessing pages on the Apple web site. If the hyperlink gives you a "We're sorry" message, try again. -
about a yar ago my ipod went off and wouldnt turn on. i can finallly get it to turn on now but all it will show is a screen of the aple charger with and arrow pointing to the circle itunes app. does anyone know how to fix this?
Connect the iPod to your computer and restore via iTunes
iTunes: Restoring iOS software
Maybe you are looking for
-
Using SQL Server 2008 R2. Tempdb resides on disks W and X both of those are 250 GB each. Nothing else resides on these disks. The recovery mode for tempdb is set to Simple and is split in 8 files and one log file. Each of the tempdb file is set for a
-
Explosion effect for single Image in Flash CS5
Hello All, I was hoping for assistance on how to recreate an explosion effect like Flash 8 adn MX used to have. It seems to be missing now. It is not in the presets. I tried to break apart but something is missing. How can I accomplish this? I
-
Icloud not recognizing icloud password after a system reinstall and I cannot get into my ipad 2.
My ipad suddenly became corrupted and prompted me to go through recovery mode. I followed the reinstall process, entered in passcodes, and allowed the reinstall for my apps to take place overnight. However, now the Ipad 2 does not recognize my icl
-
HT1752 how do I go back from OS 10.8.3 to 10.6.8?
Aloha: I really knew better, but I just couldn't help it. the new operating system sounded great and it was very inexpensive. how could I go wrong? Let me, but count the ways. After about a 6 hour wait for the download, but that was no skin of my no
-
Is there a way to create drop down menus in IWeb
I want to have drop down menus from the main ones on my website. How do I do that?