How to remove audio from iMovie

I recorded a video on my Sony camera and now after watching the clip there was something I said on that clip that I do not want the other person to know about it once I burn the clip to a DVD disc. Is there anyway to do this and how? If there is may you please provide step by step instructions on how to do it.
Thank you.
Ebrahim

Two quick Videos you should watch.
1) This one from iMovie 08 covers the basics.
2) this one shows the new features in iMovie 11. Choose the one that says All New Audio Editing.
There are two ways to have the audio muted in parts. 1) Select the frames you want to mute (by dragging) so that the yellow border is around them. Then right-click/Split Clip. Then set the Volume slider to zero., using the Audio Tab of the Clip Inspector.
2) Use the rubber banding as shown in Video #2.

Similar Messages

How to remove audio in iMovie

I've just started using this new version of iMovie. I did pretty well with the older version, but nothing I learned there seems to work with this one. I can't figure out how to manipulate the original audio. I want to only having it playing in parts and have music overlayed. If I can't do that, I would like to completely remove the recorded audio and just have music. Is there a simple way to do this?

Two quick Videos you should watch.
1) This one from iMovie 08 covers the basics.
2) this one shows the new features in iMovie 11. Choose the one that says All New Audio Editing.
There are two ways to have the audio muted in parts. 1) Select the frames you want to mute (by dragging) so that the yellow border is around them. Then right-click/Split Clip. Then set the Volume slider to zero., using the Audio Tab of the Clip Inspector.
2) Use the rubber banding as shown in Video #2.

Audio from iMovie 10.1 to garageband??

wanting to edit some sound from iMovie, so Just wondering if anyone knows how to get audio from iMovie 10.1 in to garage band at all? i have found numerous tips and videos from the previous versions but not 10.1?? can anyone help

Curious also is that in the new Garageband 10.0.1, the media broswer only shows the "old" iMovie library (from 9.0.9), you can though browse all movies in the movie folder, (so except the new iMovie 10 Library)
So either you share your movie with iTunes (that you can look up in the mediabrowser of GB) or export as an mp4 movie tot your movies folder, which you can approach as well via the media browser in GB 10.0.1
Ben

HT4016 How to extract audio from a movie that is already in my project without having to delete and re-import the movie?

The article is
"How to extract audio from a movie file"
But it only tells you how to extract when you first drag the movie file into the project. This much is obvious when a dialog presents you with a checkbox asking if you want to "Extract the audio track" ... Duh
Here was my workflow:
Dragged the movie file into my project
I checked "Extract the audio track"
I shifted the "Movie Start Time"
Extracted audio track did not shift with the movie
I deleted the extracted audio and played the audio directly from the movie
Now, I need the audio extracted again at the current movie position
I knew where this option was in the Logic 9 menus, but I'm having trouble finding it in Logic X
Is this option still available, or has it been removed?

Solved:
I found the menu option for extracting or re-extracting the movie audio. BTW, the original article:
Logic Pro 9.1: How to extract audio from a movie file in 64-bit mode
should really also state the menu command for extracting the audio, not just the procedure when first adding the movie to the project.
Here's the menu command:
File>Movie>Import Audio from Movie
Cheers

How to remove songs from iPad?

I've read several threds from users asking how to remove songs from the iPad 1.0, but have not found anyone with the symptoms mine has.
For some unknown reason, the checkbox next to each song to remove them from the iPad is disabled.
My latest attempt at removing all of the music was to tell iTunes to "Sync Music" with "Entire Music Library' selected. That caused iTunes to push all 2700+ songs to the iPad. I checked to see if I could remove the songs from the iPad by de-selecting the checkbox, but the checkbox was still disabled.
So I told iTunes to stop syncing Music. I acknowledged the warning message that this would remove all songs from the iPad. Perfect - remove everything and I'll manually add the songs I want to put back on. However, the results were not what was intended... I am back to where I started:
When I open "Music" on my iPad, it shows lots of albums and songs (over 2700).
When I view my iPad using iTunes, "Sync Music" is disabled and the capacity indicator shows 11.1GB of space allocated to audio files.
When I view my iPad's Music folder using iTunes, it shows only 3 albums.
At this point, I am thinking my only option is to wipe the iPad and manually add everything back on. I'd rather not do that... but am out of options I can think of.

I cannot delete music from my iPad2. I've gone into iTunes and selected to manually manage my music. When I click on my iPad and then MUSIC, I don't see any songs listed. When I look at my iPad itself under usic there are a ton there. I just want to keep my iPad free of music. I don't need my music on my phone and my iPOD (yes, I still use an iPOD and I still like my music SEPARATE.)
HELP
Thanks.
PS: I'm using iTune 11.1.3.8
iTunes software and iPad software up-to-date

How to remove audio?

i have some clips/thumbnails that i don't want to have the ambient sound in it. how do i remove audio from selected sections?

i mean how do i use just the audio and not the video?
If you mean "extract" the audio and add it to the project, simply select the audio segment needed in the "Events" window, press "Command-Shift" and drag the clip segment to the project window. (A "plus" should indicate the dragged content can be added to the project.) Drag to start point -- e.g., the start of another video clip and release it. A green audio track will appear under the video which you can now slide/adjust length for use.

HT1386 The first time I synced my iphone with my mac, I didn't realize that all of my photos from iphoto would transfer over to the phone. Now, I need to remove some, as they are taking up too much space. I cannot figure out how to remove them from the

The first time I synced my iphone 4 with my mac, I didn't realize that all of my photos from the iphoto library would transfer over to the phone (more than 3,000). Now, I need to remove some, as they are taking up too much space. I cannot figure out how to remove them from the phone. I tried to uncheck boxes and sync again, but I get a message that there is no room on the iphone. I've read as many articles as I can find, but still cannot manage this. Thanks for any help.

Open itunes, connect iphone, select what you want, sync

How to remove pics from my 3GS...???

How to remove pics from my 3GS..???

Photos taken with the phone can be deleted by selecting them and hitting the little wastebasket icon in the right bottom corner.
Photos you did sync to your phone, can only be removed by deselecting them in the photo pane in iTunes, the following sync will remove them from the phone.

Does anyone know how to remove images from google

i had instagram and i didnt upload images of myself but i only used my own image in the display picture and some how it has gone on to the google image search yesterday i deleted my account but when i checked to see if my images do appear in the google images i had some really bad regrets !! i reallywant to know how i can remove pictures off the google image search even doe this does not kind of relate thank you .

Does anyone know how to remove vocals from an import from I tunes...a polyphonic stereo mix ?
If you are talking about some "Karaoke" method using Logic I'll try to offer one. Before that I must say that most of the Karaoke methods are based on reversing the Phase of one of the stereo channel and bussing or merging the stereo into Mono. The result is: killing all Pan Centered in the mix - like Main Vocal, Bass, Kick, SN ect.
The artifacts of the Stereo FX of the main vocal will stay in the Karaoke, cause the FX is stereo etc.
Here is the Logic Setup I can offer to try some Karaoke trick using Logic.
1. Import a Stereo mix into a Logic Stereo track.
2. Create another stereo track and duplicate (copy) the Original Mix region to the duplicated track.
3. Hard Pan L/R both stereo tracks.
4. Insert an EQ and Gainer plugins into the duplicated track (R).
5. Set the Output select of the both tracks to a Bus and assign the new Aux Track Switch mode to "Mono".
6. Open the Gainer plugin and thick the "Phase Invert" Right button.
7. To keep the "lowend" instruments like the bass and kick, open the EQ plugin and enable the Low Cut filter and try some Hz settings 80-115, or different Q which will sounds better for your Karaoke.
P.S Click the image below to show its real resolution!
Regards,
A.G
======================================
www.audiogrocery.com
Author of: Logic GUI Deluxe(Free), Vox De Bulgaria s.a.g.e vocal pack for RMX, Logic Snapshot Console, RMX Power CTRL - Logic Environment Midi editor for Stylus etc.
======================================

How to remove Unicode from XML file

I get following error when unmarshal xml:
[java] org.xml.sax.SAXParseException: An invalid XML character (Unicode: 0x15) was found in the element content of the document.
Anyone know how to remove Unicode from xml file? Can I remove the unicode by rebuild the file?
Thanks

These sort of error usually occur when you're using a different character encoding to read the file than the one you wrote it with. Perhaps if you were to post the problem section of the file and/or the code that created it in the first place.

How to remove iPhone from a certain computer

How to remove iPhone from a certain computer along with it's ID to allow another phone to use the comp soley.

You do not need to do anything.
Simply stop syncing the iphone to the computer and begin syncing the new iphone to the computer.

How to remove Seperator from check-in and profile check in pages

How to remove Seperator from check-in and profile check in pages
The seperator is included on the checkin pages, which is present in the std_page with name "std_namevalue_separator", this is called by td_document_checkin_fields and std_document_file_fields.
Defination of include:
<@dynamichtml std_namevalue_separator@>
<$if not isUploadFieldScript$>
<tr>
<td width="<$captionFieldWidth$>"><hr /></td>
<td width="<$captionEntryWidth$>"><hr /></td>
</tr>
<$endif$>
<@end@>
I have to remove the following include from some of the profile check in page.
Please suggest if anyone have some idea, how to proceed.
Thanks,
Sumit

791848 wrote:I have to remove the following include from some of the profile check in page.The key here is that you want to do this in some profiles, not all profiles or globally, if I'm reading this right.
Without writing a component, you can put this code in the "side effects" box in the desired profile(s). This code removes the horizontal rule, and inserts a non breaking space in its place.
<$setResourceInclude("std_namevalue_separator","<$if not isUploadFieldScript$>
<tr>
<td width=\"<$captionFieldWidth$>\"> </td>
<td width=\"<$captionEntryWidth$>\"> </td>
</tr>
<$endif$>")$>YMMV. The non-breaking space may get stripped out in the forum.

How to remove text from .swf animation?

how to remove text from .swf animation? Can no find this text
in fla file. Flash 8.

exactly what 'text' are you referring to? text that you typed
on the Stage using the 'textTool'? simply select the text with the
'arrowTool' and hit delete.
If you are referring to a textField that you want to
eliminate after a certain amount of time, within your animation
sequence. first copy the text, create a new layer, paste the text
in place, then where you want to have the text 'disappear' insert a
'blank keyframe' at that point in the text layer.
OR place the textfield within a MC and remove it with code.
OR if the text is dynamic and you wish to use the position at a
later time, pass a value of null or and empty string to the field
at the point you wish. And there are other ways still. :) hope one
of these works for you.

How to remove passcode from ipod touch 3g if power botton is not working?

how to remove passcode from ipod touch 3g if power botton is not working?

Use this program to place the iPod in recovery mode so that you then can restore the iPod via iTunes.
RecBoot: Easy Way to Put iPhone into Recovery Mode

How do I export from IMovie when "not enough room in Heap Zone" error code appears? How can I correct, what to Do.."export movie" insteand of Media browser or IDVD? Finalize movie? I want to burn it to DVD!

How do I export from IMovie to Wondershare Creator to Make DVD and share hour long movie when I am unable to "publish" movie on Media Browser of IDVD because the error code "not enough room in heap Zone/ " appears and function is aborted.
I shortened the movie, that is no cure...Correcting date info on clips does not pertain. Why would Apple throw roadblocks in your way without solving problems they create?
A techie made an appointment on the phone and was totally incapable of addressing the problem.
What is a heap zone????

Instead of Share to Media Browser, what happens if you try Share Menu > Export Movie... (choose Large size) and save it to the Desktop?
If that fails try Share Menu > Export using QuickTime...
Then pick Movie to QuickTime Movie, then click on Options... which is just to the right of Export
Under the Video section click on Settings...
Then in the pulldown menu at the top, titled Compression Type: Choose Apple Intermediate Codec. Then click OK. And click OK again, and save it to the desktop. Once the .mov file is created, you can import that into iDVD and most likely it will work in Wondershare Creator if you prefer to use that instead.

How to remove audio from iMovie

Similar Messages

Maybe you are looking for