How to remove black background?

Hi,
How to remove black and gray background found in the attachment(1 page). Thanks.

You can't do it with Acrobat alone. You could if you had Pit Stop or something similar.
If you have Illustrator you could probably open it and remove it there but you'd probably end up getting font substitution if you don't have the same fonts on you system.

Similar Messages

How to remove black "blocked plug-in" window that opens with iPhoto. It covers iPhoto and everything under it. I've right and left clicked the black window, restarting the computer, shutting down the computer, but the window always appears when I ope

How to remove black "blocked plug-in" window that opens with iPhoto. It covers iPhoto and everything under it. I've right and left clicked the black window, restarting the computer, shutting down the computer, but the window always appears when I open iPhoto and it will not move or go away. It stays on my screen (covering my desktop icons) even after I quit iPhoto. How can I get it off my screen?

Which version if iPhoto and MacOS X do you have?
Do you have any iPhoto plug-ins installed?
Open the folder /Library/Application Support/iPhoto/Plugins/
To navigate to that folder, open the folder "Library" directly on your Macintosh HD, then inside the Library folder go to Application Support, then iPhoto. Is there anything installed?

How to remove black "blocked plug-in" window that opens with iPhoto and covers everything under it?

How to remove black "blocked plug-in" window that opens with iPhoto. It covers iPhoto and everything under it. I've right and left clicked the black window, restarting the computer, shutting down the computer, but the window always appears when I open iPhoto and it will not move or go away. It stays on my screen (covering my desktop icons) even after I quit iPhoto. How can I get it off my screen?

Which version if iPhoto and MacOS X do you have?
Do you have any iPhoto plug-ins installed?
Open the folder /Library/Application Support/iPhoto/Plugins/
To navigate to that folder, open the folder "Library" directly on your Macintosh HD, then inside the Library folder go to Application Support, then iPhoto. Is there anything installed?

Can't remove black background of camera flare in tech blue HD...

I am modifying a template in Motion for the opening of an Industrial Video for a client.
I have isolated the lens flare and the lens flare rectangle, but cannot seem to export without the seemingly built in black background.
Can anyone tell me how to export the lens flare minus the black background, or where I can get or how I can create a lens flare on my own.
This is an emergency, any help would be appreciated.
Regards,
SMGHD

I did it and the background remains black. I either must be doing something wrong, or there is an inherent flaw in this program.
Do you know where else I may be able to search/create a lens flare that will export without a black background??
In any case, thank you for your help.
Regards,
SMGHD

How to remove black borders from picture?

http://www.homeofthenutty.com/twilight/screencaps/albums/TwilightPart2/Twilight1833.jpg
Is there a Photoshop tool that can easily remove the black borders from pictures like this? Anyway to extract the image from the black background?

You may be able to use the Image - Trim feature, though it requires exact pixel color matches, which may not be true with lossy compression (e.g., JPEGs).
Another way is to use the Magic Wand Selection Tool with some tolerance (e.g., 24), select the borders, invert the selection, then use Image - Crop. It will cut off all fully selected rectangles of pixels.
Watch your copyright issues if modifying copyrighted works
-Noel

How to remove white background from a jpeg ?

Hi, i have an all black website as can be found here : http://www.cyclonecupshaker.co.uk and i am having issues with the standard ways of tracing an image. For some reason there is always some white specks that obviously stand out on a black background. Thanks a lotm

Multiply Blending sill do the trick. Background Replacement using a Mask

Removing black background-(looking for transparency on title stuff)

final cut studio Guru's....specifically "live type" pro's.
Tried everything in the manual & more...still, no do workee.
Have other footage to run behind title stuff. White text...
Short blue fx line....I'm listening to Howard Beale and
I'm about to scream outa' my window...for my neighbor's sake, a little help?
Gracias,
g. tirebiter
mac G-5 Mac OS X (10.4.7) final cut studio
mac G-5 Mac OS X (10.4.7) final cut studio

OC, explain a bit more- because what David explained
is correct. If you export from livetype without
rendering the background, then the background is
actually transparent.
My assumption here is that after you do this, you are
watching the quicktime file that pops up in live type
after it renders- and it has a black background.
This is normal, but actually transparency is there.
Import the QT file into final cut and throw it on a
v2 track above another video image. You will notice
that there actually is a transparent background in
FCP...
If you have already done this and you are still
seeing black, my next question would be what format
are you editing in? DV?
good morning geniuses......
Rocky Rococo at your cervix...THAT WAS IT! I am the "slime"
from the vi-deo....a little footage and Wha-Law! my hours of fear & self loathing are over...why is it always the obvious starin' ya' in the face that fixes th' problem...
THANK YOU to all of you who took the time to respond this
early A.M....David & eventually ENZO helped me pull my head out... here in the O.C. (but to all who responded...may th' good lord take a likin' to ya'....)
I'll never make this particular mistake again...why? when there's so many more to gnash my teeth about...
drive fast...play hard, compadres!
george tirebiter
mac G-5 Mac OS X (10.4.7) final cut studio

How to remove this background from Photoshop please help?

This is what I have. http://img89.imageshack.us/img89/1681/xdzj.png
CS6
I used the magnetic and polyganol lasso tool to remove sections, after I drew a section, I pressed enter and then backspace, which made the section turn gray. But now it's just gray, on the same layer, and I can't do anything about it. I wanted an empty background under the image.
I can't use the magic selection tool because it DOES NOT select around the image properly (it selects INSIDE of the image) not where I cropped it out. And the magic selection tool is crappy. It leaves zig zagged white spots so why would I use that. I cropped the entire thing out, and now I can't even see it without the background? What the F**king* F**k?

You are indeed looking at the transparency, there is nothing below that layer. Your Layer panel only shows your one layer.
The circles you created (with the eraser, I guess?) show the checkered scheme that denotes the transparency.
Without knowing what exact version of Photoshop, of your OS and platform (the screen shot shows Windows) I can't even begin to guess how you got the gray in there: some option in a tool somewhere, the paint bucket even…?
You can embed images in your posts by using the little camera icon in the Reply Editor of the forum's web interface.

How to remove black bars after image rotation

I am very new to using premiere pro. I took a video with my smartphone as the content for a project. The original dimentions was 1280 wide and 720high. I imported the video and needed to rotate it 90 degrees. Instead of wide, I need it tall. I imported and then went under effects control - motion - rotation to rotate how I wanted.
But now on the screen has black bars on the sides since rotating it, and when I export the basic video settings is greyed out, so I can't change it. It is set/fixed at 1280 x 720 with the black bars.
How can I remove the side black bars in premiere pro to fit the dimensions of the newly rotated video?

You need to create a new sequence with the settings at 720X1280 and put your video on that sequence. It requires you to use the custom settings so make sure everything matches.
To export it after you edit it, choose a 720p format and unlock the Width and Height so you can manually set the image to 720X1280. That should work for you.
To make sure I wasn't steering you wrong, I just shot a vertical video, imported it into a 720X1280 custom sequence, put a title on it and exported it using an Android preset, unlocked the settings and swapped the width and the height. I then emailed it to my phone and played it. Worked great. It also plays OK in Windows Media Player. It is funny to see it that way on a PC, but I can think of a few reasons that I might be inclined to shoot that way. Specifically if I was going to play it on a portrait oriented display.

How to remove black border around image files?

I'm something of a beginner with Photoshop, so forgive me if I've missed something entirely obvious: for some strange reason I'm now getting a black border around all image files that I save through the "Save for Web & Devices" panel. Does anyone know how I can save without creating this border? It looks rather unsightly when I load it into a client site. The file in question is a .png, but I seem to be getting the same effect with all other image files as well.
Thanks in advance,
Shane

One cause could be having the matte color set to something other than none.
Is that a png-8?
MTSTUNER

HOW 2 REMOVE WHITE BACKGROUND FROM JPG OR GRAPHIC?

I am trying to "knock out" the white background on some logo art that I am using on title pages. The logo art was supplied to me in both PSD and JPG format. I can certainly use photoshop to remove the white and save in layers, but when I import and place, the white comes back. Thanks in advance!

You need to save the PSD as a TIFF file or PNG with transparency enabled.
Simple way: separate your logo and background in Photoshop.
Make sure that the unprotected area is your logo. Press command C to copy.
Go to File > New > Film and Video Presets. Choose one that matches the pixel dimensions of your project. Make sure that Background color is set to Transparent. Click OK.
Paste your graphic (command V) into the transparent template. Save as above.

How to remove black layer around answer form

Hi guys,
When i export a filled in user registration form, I get these black layers around my filled in answers. I would like to remove these layers because I need to send these filled in forms back to my clients because they need to sign them.

Removing field borders is not supported at this time for HTML based workflows. If this is a PDF based workflow and you had a full version of Acrobat you could set the field properties manually to not show borders.

How to remove transparent background from a circle shape

I have been desperately trying to create a circular logo for an icon in Photshop CS6. Unfortunately I have to start with a rectangular background. After creating the circluar icon I want to remove it from the canvas leaving only the circular icon. I can't find a way to do it.
Everytime I try I end up with the canvas shape behind the icon logo.
Isn't there a way to crop a circle? Initiate a circular canvas? Help!

Hi there
As Charles mentioned, it would be very helpful if you could post a screenshot. When you say "rectangular background", do you mean the locked background layer that's in your layers panel when you create a new canvas? I've posted a screenshot below.
If this is the case, you can simply delete this background layer. Unless you have another background layer, this will leave you with a transparent background, essentially "removing" the area around your logo. You would then be able to save the file in a format that supports transparency (such as .png).
Please post again if you need further clarification. Screenshots would be very helpful!

Photosmart C8180 - how to remove black ink message window

I recently changed my black ink cartridge and now every time I hit print a window appears saying the cartridge is empty and to replace it. I have to hit "continue" in order to get the printer to print. How do make this window go away? Donna

Hi - You'll have to contact HP Support for assistance with resetting your printer for a different region. This partricular reset should be covered under warranty. Here is the contact information for South Africa. They'll be able to reset the printer so it will accept the cartridges from South Africa.
Hope that helps.
Say Thanks by clicking the Kudos thumbs up. Please mark the post that solves your problem as an Accepted Solution so other forum users can utilize the solution.
I am an HP employee.

Help on removing black background from pre-keyed footage - tried everything, won't work, help!

Hi there,
I have Adobe Premiere Pro CS6, and up until now, I've had no problem working with pre-keyed footage. I usually place the footage into my timeline, and then would choose a blending mode such as "screen" or "multiply" to erase the black or white background. Except this time, nothing works! I've tried importing different footage, worked with opacity levels, and tried updating all my Adobe applications, downloaded Quicktime 7, etc. etc.
I am still somewhat amateur to all of Premiere Pro, but up until now, I've had an easy time with everything. Any help you can give would be appreciated!
Thanks,
Gabrielle

Hi all,
Well, I figured out what I was doing wrong. It is extremely embarrassing to admit this, but I was only looking at the footage itself I wanted to change. When i placed it over the other footage, it wasn't blocking it out anymore like it was before (if that makes any sense, I hope it does). Anyway, the blending modes worked perfectly, and I am almost done now with my simple project. I'm going to save your answers, though, because I know I will need to refer to this in the future.
Thanks all, for your help and patience,
Gabrielle

How to remove black background?

Similar Messages

Maybe you are looking for