How to remove blank data from a byte array

Hi All,
How to remove blank data from a byte array. Suppose I created a byte array as byte[] b = new byte[8192] and i read the data as inputstream.read(b). If the data that has been received is only 1000 bytes length, how to find out how much data has been read or how to delete that blank 7192 bytes of data?
Thanking you,
Regards,
Shankar.

1) Always try to sidestep this by allocating only the necessary amount of space required...
2) If 1 is not possible, you will have to index byte for byte how much data was read into the array which
denotes reading byte for byte... not ideal as this is relatively slow...
Are you reading from a file?

Similar Messages

WebDynpro Java: how to remove blank element from Table and Dropdown.

Hi Folks
In a webdynpro application,
I created a table and witten the below code to populate the table
     IPrivateDummyView.IFirst_TableElement First_Table_Element = null;
     First_Table_Element = wdContext.nodeFirst_Table().createFirst_TableElement();
     First_Table_Element.setF_Value("One");
     wdContext.nodeFirst_Table().addElement(First_Table_Element);
     First_Table_Element = wdContext.nodeFirst_Table().createFirst_TableElement();
     First_Table_Element.setF_Value("2");
     wdContext.nodeFirst_Table().addElement(First_Table_Element);
As per the code, i got 2 row in the table.
But , i have one Empty row on top of the table , how to get ride of this.
i find the same problem happening with dropdown too, where i used DDBI, i populated a the content as mention, but i initial 2 row as blank and then i have my own elements ,as per my code.

>
> how to remove blank element from Table and Dropdown
>
Change selection property of related node to from 0..1 to 1..1 (mandatory)
Re: DropdownByIndex and empty line (Thread: DropdownByIndex and empty line )
Re: Can the empty selection be removed from element dropdownbykey(Thread: Can the empty selection be removed from element dropdownbykey )
Edited by: Anagha Jawalekar on Nov 18, 2008 10:28 PM

How to remove blank pages from WebI Report in view page layout option

Hi,
I am working in Business Objects XIR2 environment. I have a WebI report with several sections. I need to show the report as a book with 69 sections (each section on new page). there are 69 sections on cost center and each cost center section has almost 10 sections embedded in it. When i see in regular view - I only see 69 pages but when I try to see in "View Page Lay out" option, there is one blank page added after each results page.
Please let me know how to remove this blank page. I need to give users the option to download the book as PDF on to their machine. Now, when I download to my machine, I see one blank page after each results page.
Thanks in advance.

Jus convert your report in Page Layout mode and see if your first pafe is getting expand in the second page.
Now check if there are any cell going into second page.
- if there are any blank cell which is there after table.
you have to check formating very carefull.

How to remove header data from JMS Queue while sending by jms adapter

Hi.
I have a problem regarding the MQ-series JMS adapter.
When writing the file the JMS adaptor putting some additional tags.
Actually we are converting idoc-xml to flat file by using ABAP mapping which is available in SAP document. We are using JMS Receiver adapter, whiel sending flat file to JMS QUEUE, it is displaying some extra xml tags. I think this is the header data available in IDoc XML. Can any body help me in removing header data.
There must be some way for XI's JMS adaptor to not include these information.
My example looks like this:
RFH Ø
¸MQSTR
¸ " is junk that I really dont need in the file.
How can you setup the JMS adaptor not to put in these information?
Thanks & Regards,
Madhusudhan

not related

How to remove blank pages from report

Hi All
i have a condition where i have to display the record only when trxn lines are available for that record ,inside my for each group condition i put the if condition having a count variable so if count is not zero then only the record will be displayed ,it works but problem is it shows blank pages for those records.
any clue would be very helpful.Thanks in advance
Thanks
Pratap

Hi All
The solution of this issue is given in below mentioned thread
How to avoid blank page in BI Publisher
Thanks a lot to Vestrini :)
Thanks
Pratap

How to remove web data from the top and bottom of my Ebay invoices so I can print them without it.

When I create my Ebay invoices, (which are generated through the browser in a new window) data is also generated at the top and bottom that I don't want to show on the invoice. The data is the date and time at the bottom, together with the page number, and at the top it shows the web location. In Explorer, you can remove this before printing but I can't work out how to do it in Firefox. Help please!

Hello!
You can change that in Page Setup, choose the "Margins & Header/Footer" tab and chose "--blank--" instead of the data that you don't want it to appear.
You can visit [https://support.mozilla.org/en-US/kb/how-print-websites#w_margins-and-header-footer How to print websites] for more details.
I hope that helps,
Have a nice day

Remove Blank Values from Slicer in Power View

Hi all,
I am trying to create a power view report from a power pivot data model. After creating the model when I try to use the slicer in power view I am seeing the Blank record. Then I checked that dimension in model where I don't have any blank value in there.
Also I checked in fact table where it has a relationship with that dimension and I don't see any blank value there as well.
I am currently blocked with this issue. Experts please jump in and give some ideas how to remove blank value from there.
Thanks

As MM-99 already stated correctly, the BLANK-member is created if there is one or more non-matching row in your fact-table that does not exist in the dimension-table
maybe you have some issues with upper and lower case?
or maybe there are some whitespace characters contained in the text?
to identify the issues you may want to create a calcuated column in your fact-table as =RELATED('DimTable'[MyKeyColumn])
then you can filter on that column and see if any blank values appear
hth,
gerhard
Gerhard Brueckl
blogging @ http://blog.gbrueckl.at
working @ http://www.pmOne.com

On my mac, photoshop cc "save as" removes capture date from exif data. How do I prevent this?

On my mac, photoshop cc "save as" removes capture date from exif data. How do I prevent this?

You had to reinstall CS6 after cancelling the CC as both were from the same Adobe ID. You can always use & keep both CC & CS6 together.
Please refer to the blog:
Can I install both CS6 and CC apps on my computer? « Caveat Lector
Other references are :
Creative Cloud Help | Install, update, or uninstall apps
What is the difference CS6 & CC Versions?
Regards
Rajshree

Does anyone know how to remove the date stamp from photos?

I don't remember how I added the date ON the photos to begin with, and now I don't know how to remove them!

Try the Retouch tool in iPhoto. Otherwise you would need to use a 3rd party image editor, like Photoshop Elements that has a clone or healing tool to remove the date from the image.
This is what PSE can do but it might be a bit overkill for just doing dates.
OT

How do i retrieve data from a powerbook whose screen lights up but displays nothing? I have a firewire and a second powerbook...

how can I retrieve data from my old powerbook? It's screen lights up, but displays only pixelated blankness. I have a second powerbook and a firewire cable....

It would probably be correct to assume that both PowerBook computers are equipped with FireWire. The article below could possibly be of interest to you. With a bit of luck, the old computer will be recognised.
http://support.apple.com/kb/HT1661
Otherwise, it may become necessary to open the old PowerBook and remove the hard drive. The drive can then be connected to an appropriate external USB adapter, and read via another Mac.
Jan

How do i parse data from the second jframe back to the first?

Hello.
I have a jFrame were I promt users to keep a list of Names in a jTable. (I keep data for something else, but lets say names.. ) Anyway, afterwords I want to add some extra parameters for each name. So I created a new frame, which is opened when user press an Edit button. The new frame opens and users can add for the specific name some extra data, like age, height, color, sex.. etc. that characterizes this person.
On this second form i have a save button, which when its pressed i would like to keep this information for this name, so as when user press edit again from the first frame on the same Name the data that previously entered will be loaded (lets say that the user can not enter the say name again)
I haven' t figured the code for the save Button, but with the rest I am fine.
Can you give any ideas with structures that I have to use and how the action listener will have to be??
When I set visible the new form i have made a constructor that loads the new form which have a label with the name of the person that is edited., but how do i parse data from the second form back to the first that is already opened??
Thanks very much..

I found it.. it was not so hard afterall..
anyway, i quote the new code..
package namelist;
// Java core packages
import java.awt.event.*;
import java.util.*;
// Java extension packages
import javax.swing.*;
import javax.swing.table.*;
public class NamesGUI extends javax.swing.JFrame {
    //Variables for managing the jTables
    DefaultTableModel tableModel;
    Vector rows,cols;
    String[] colName1 = {"List of Names"};
    ManageJTables mJT = new ManageJTables();
    Hashtable h;
    /** Creates new form ProsAgentGUI */
    public NamesGUI() {
        h = new Hashtable();
        initComponents();
    /** This method is called from within the constructor to
     * initialize the form.
     * WARNING: Do NOT modify this code. The content of this method is
     * always regenerated by the Form Editor.
    private void initComponents() {
        Panel = new javax.swing.JPanel();
        ToolBar = new javax.swing.JToolBar();
        ADD = new javax.swing.JButton();
        EDIT = new javax.swing.JButton();
        REMOVE = new javax.swing.JButton();
        jButton1 = new javax.swing.JButton();
        TScrollPane = new javax.swing.JScrollPane();
        Table = new javax.swing.JTable();
        setDefaultCloseOperation(javax.swing.WindowConstants.EXIT_ON_CLOSE);
        setTitle("Names");
        setBackground(new java.awt.Color(0, 51, 51));
        Panel.setBorder(javax.swing.BorderFactory.createTitledBorder("List of Names"));
        ToolBar.setBorder(javax.swing.BorderFactory.createEmptyBorder(1, 1, 1, 1));
        ADD.setText("ADD");
        ADD.setToolTipText("");
        ADD.setBorder(new javax.swing.border.SoftBevelBorder(javax.swing.border.BevelBorder.RAISED));
        ADD.addActionListener(new java.awt.event.ActionListener() {
            public void actionPerformed(java.awt.event.ActionEvent evt) {
                ADDActionPerformed(evt);
        ToolBar.add(ADD);
        EDIT.setText("EDIT");
        EDIT.setToolTipText("");
        EDIT.setBorder(new javax.swing.border.SoftBevelBorder(javax.swing.border.BevelBorder.RAISED));
        EDIT.addActionListener(new java.awt.event.ActionListener() {
            public void actionPerformed(java.awt.event.ActionEvent evt) {
                EDITActionPerformed(evt);
        ToolBar.add(EDIT);
        REMOVE.setText("REMOVE");
        REMOVE.setToolTipText("");
        REMOVE.setBorder(new javax.swing.border.SoftBevelBorder(javax.swing.border.BevelBorder.RAISED));
        REMOVE.addActionListener(new java.awt.event.ActionListener() {
            public void actionPerformed(java.awt.event.ActionEvent evt) {
                REMOVEActionPerformed(evt);
        ToolBar.add(REMOVE);
        jButton1.setText("jButton1");
        jButton1.addActionListener(new java.awt.event.ActionListener() {
            public void actionPerformed(java.awt.event.ActionEvent evt) {
                jButton1ActionPerformed(evt);
        ToolBar.add(jButton1);
        rows=new Vector();
        cols= new Vector();
        cols=mJT.addColumns(colName1, cols);
        tableModel =new DefaultTableModel();
        tableModel.setDataVector(rows,cols);
        Table.setModel(tableModel);
        TScrollPane.setViewportView(Table);
        org.jdesktop.layout.GroupLayout PanelLayout = new org.jdesktop.layout.GroupLayout(Panel);
        Panel.setLayout(PanelLayout);
        PanelLayout.setHorizontalGroup(
            PanelLayout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
            .add(ToolBar, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, 210, Short.MAX_VALUE)
            .add(TScrollPane, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, 210, Short.MAX_VALUE)
        PanelLayout.setVerticalGroup(
            PanelLayout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
            .add(PanelLayout.createSequentialGroup()
                .add(ToolBar, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, 34, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
                .addPreferredGap(org.jdesktop.layout.LayoutStyle.RELATED)
                .add(TScrollPane, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, 159, Short.MAX_VALUE))
        org.jdesktop.layout.GroupLayout layout = new org.jdesktop.layout.GroupLayout(getContentPane());
        getContentPane().setLayout(layout);
        layout.setHorizontalGroup(
            layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
            .add(org.jdesktop.layout.GroupLayout.TRAILING, layout.createSequentialGroup()
                .addContainerGap(org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, Short.MAX_VALUE)
                .add(Panel, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
                .addContainerGap())
        layout.setVerticalGroup(
            layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
            .add(org.jdesktop.layout.GroupLayout.TRAILING, layout.createSequentialGroup()
                .addContainerGap(29, Short.MAX_VALUE)
                .add(Panel, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
                .addContainerGap())
        pack();
    private void jButton1ActionPerformed(java.awt.event.ActionEvent evt) {
// TODO add your handling code here:
        System.out.println(h.toString());
public void updateNamesTable (int id, String na){
     Integer i2 = new Integer(id);
     Object o2 = (Object)i2;
     if (h.containsKey(o2)){
        Name a = (Name)h.get(o2);
        a.name = na;
        h.put(o2,a);
     else {
         Name aa = new Name();
         aa.name=na;
         h.put(o2,(Object)aa);
    private void EDITActionPerformed(java.awt.event.ActionEvent evt) {
// TODO add your handling code here:
        String name = Table.getValueAt(Table.getSelectedRow(),0).toString();
        int rowNum= Table.getSelectedRow();
        Integer i = new Integer(rowNum);
        Object o = (Object)i;
        updateNamesTable (rowNum, name);
        //public NameEditor(Name n, Hashtable h, int id)
        NameEditor re = new NameEditor((Name)h.get(o), h, rowNum );
        re.setVisible(true);
    private void REMOVEActionPerformed(java.awt.event.ActionEvent evt) {
// TODO add your handling code here:
        mJT.deleteRow(Table.getSelectedRow(), rows, Table);
    private void ADDActionPerformed(java.awt.event.ActionEvent evt) {
// TODO add your handling code here:
        mJT.addRow(rows, Table);
     * @param args the command line arguments
    public static void main(String args[]) {
        java.awt.EventQueue.invokeLater(new Runnable() {
            public void run() {
                new NamesGUI().setVisible(true);
    // Variables declaration - do not modify
    javax.swing.JButton ADD;
    javax.swing.JButton EDIT;
    javax.swing.JPanel Panel;
    javax.swing.JButton REMOVE;
    javax.swing.JScrollPane TScrollPane;
    javax.swing.JTable Table;
    javax.swing.JToolBar ToolBar;
    javax.swing.JButton jButton1;
    // End of variables declaration
public class NameEditor extends javax.swing.JFrame {
    Hashtable h;
    Name n;
    int id;
    /** Creates new form NameEditor */
    public NameEditor() {
        initComponents();
    public NameEditor(Name n, Hashtable h, int id) {
        this.h=h;
        this.n=n;
        this.id=id;
        initComponents();
        NameField.setText(n.name);
        jTextField2.setText(n.weight);
        jTextField1.setText(n.height);
        setDefaultCloseOperation(javax.swing.WindowConstants.DISPOSE_ON_CLOSE);
    /** This method is called from within the constructor to
     * initialize the form.
     * WARNING: Do NOT modify this code. The content of this method is
     * always regenerated by the Form Editor.
    private void initComponents() {
        NameLabel = new javax.swing.JLabel();
        NameField = new javax.swing.JTextField();
        SaveBut = new javax.swing.JButton();
        jLabel3 = new javax.swing.JLabel();
        jLabel4 = new javax.swing.JLabel();
        jTextField1 = new javax.swing.JTextField();
        jTextField2 = new javax.swing.JTextField();
        setDefaultCloseOperation(javax.swing.WindowConstants.EXIT_ON_CLOSE);
        setTitle("Name Editor");
        getAccessibleContext().setAccessibleName("Name Editor");
        NameLabel.setText("Name: ");
        NameField.setEditable(false);
        NameField.addActionListener(new java.awt.event.ActionListener() {
            public void actionPerformed(java.awt.event.ActionEvent evt) {
                NameFieldActionPerformed(evt);
        SaveBut.setText("SAVE");
        SaveBut.addActionListener(new java.awt.event.ActionListener() {
            public void actionPerformed(java.awt.event.ActionEvent evt) {
                SaveButActionPerformed(evt);
        jLabel3.setText("Height");
        jLabel4.setText("Weight");
        org.jdesktop.layout.GroupLayout layout = new org.jdesktop.layout.GroupLayout(getContentPane());
        getContentPane().setLayout(layout);
        layout.setHorizontalGroup(
            layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
            .add(layout.createSequentialGroup()
                .add(layout.createParallelGroup(org.jdesktop.layout.GroupLayout.TRAILING)
                    .add(layout.createSequentialGroup()
                        .addContainerGap()
                        .add(layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
                            .add(layout.createSequentialGroup()
                                .add(jLabel4)
                                .addPreferredGap(org.jdesktop.layout.LayoutStyle.RELATED))
                            .add(org.jdesktop.layout.GroupLayout.TRAILING, layout.createSequentialGroup()
                                .add(layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
                                    .add(jLabel3)
                                    .add(NameLabel))
                                .add(16, 16, 16)))
                        .add(17, 17, 17)
                        .add(layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
                            .add(NameField, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, 138, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
                            .add(layout.createParallelGroup(org.jdesktop.layout.GroupLayout.TRAILING, false)
                                .add(org.jdesktop.layout.GroupLayout.LEADING, jTextField2)
                                .add(org.jdesktop.layout.GroupLayout.LEADING, jTextField1, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, 46, Short.MAX_VALUE))))
                    .add(org.jdesktop.layout.GroupLayout.LEADING, layout.createSequentialGroup()
                        .add(127, 127, 127)
                        .add(SaveBut)))
                .addContainerGap())
        layout.setVerticalGroup(
            layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
            .add(layout.createSequentialGroup()
                .addContainerGap()
                .add(layout.createParallelGroup(org.jdesktop.layout.GroupLayout.BASELINE)
                    .add(NameLabel)
                    .add(NameField, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE))
                .add(30, 30, 30)
                .add(layout.createParallelGroup(org.jdesktop.layout.GroupLayout.BASELINE)
                    .add(jLabel3)
                    .add(jTextField1, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE))
                .add(12, 12, 12)
                .add(layout.createParallelGroup(org.jdesktop.layout.GroupLayout.BASELINE)
                    .add(jLabel4)
                    .add(jTextField2, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE))
                .addPreferredGap(org.jdesktop.layout.LayoutStyle.RELATED, 27, Short.MAX_VALUE)
                .add(SaveBut)
                .addContainerGap())
        pack();
    public void updateNameTable (){
     Integer i2 = new Integer(id);
     Object o2 = (Object)i2;
     h.put(o2,n);
    private void SaveButActionPerformed(java.awt.event.ActionEvent evt) {
// TODO add your handling code here:
        n.height= jTextField1.getText();
        n.weight = jTextField2.getText();
    private void NameFieldActionPerformed(java.awt.event.ActionEvent evt) {
// TODO add your handling code here:
     * @param args the command line arguments
    public static void main(String args[]) {
        java.awt.EventQueue.invokeLater(new Runnable() {
            public void run() {
                new NameEditor().setVisible(true);
    // Variables declaration - do not modify
    javax.swing.JTextField NameField;
    javax.swing.JLabel NameLabel;
    javax.swing.JButton SaveBut;
    javax.swing.JLabel jLabel3;
    javax.swing.JLabel jLabel4;
    javax.swing.JTextField jTextField1;
    javax.swing.JTextField jTextField2;
    // End of variables declaration
}

How to insert the data from XML to a table

Hi,
I'm using Oracle 10g Express Edition
I need help in How to insert the data from XML file into the table.
Below is the example i'm working on..
I have create ridb user with below mentioned privileges:
Account Status Locked Unlocked
Default Tablespace: USERS
Temporary Tablespace: TEMP
User Privileges :
Roles:
CONNECT
RESOURCE
Direct Grant System Privileges:
CREATE DATABASE LINK
CREATE MATERIALIZED VIEW
CREATE PROCEDURE
CREATE PUBLIC SYNONYM
CREATE ROLE
CREATE SEQUENCE
CREATE SYNONYM
CREATE TABLE
CREATE TRIGGER
CREATE TYPE
CREATE VIEW
& table is created TRIALZIPCODES below mentioned is the DDL:
CREATE TABLE TRIALZIPCODES
STATE_ABBR VARCHAR2(20) NOT NULL
, ZIP_CODE NUMBER(10, 0) NOT NULL
, ZIP_CODE_EXT VARCHAR2(20)
Below is the XML FILE: which is stored in C:\OracleProject Folder
File name: trial.xml
<?xml version="1.0" ?>
<metadata>
- <Zipcodes>
- <mappings Record="4">
<STATE_ABBREVIATION>CA</STATE_ABBREVIATION>
<ZIPCODE>94301</ZIPCODE>
</mappings>
- <mappings Record="5">
<STATE_ABBREVIATION>CO</STATE_ABBREVIATION>
<ZIPCODE>80323</ZIPCODE>
<ZIP_CODE_EXTN>9277</ZIP_CODE_EXTN>
</mappings>
</Zipcodes>
</metadata>
PL/SQL Procedure:which i'm trying to execute from SQLDeveloper
create or replace
PROCEDURE TRIAL AS
BEGIN
DECLARE
-- declare attributes
charString varchar2(80);
finalStr varchar2(4000) := null;
rowsp integer;
v_FileHandle UTL_FILE.FILE_TYPE;
l_context_handle dbms_xmlgen.ctxHandle;
insCtx DBMS_XMLStore.ctxType;
begin
-- DBMS_XMLGEN.setRowTag ( ctx IN ctxHandle, rowTag IN VARCHAR2);
-- DBMS_XMLGEN.setRowSetTag ( ctx IN ctxHandle, rowSetTag IN VARCHAR2);
-- the name of the table as specified in our DTD
DBMS_XMLGEN.SETROWSETTAG(l_context_handle,'zipcodes');
-- the name of the data set as specified in our DTD
DBMS_xmlgen.setRowTag(l_context_handle,'mappings');
-- for getting the output on the screen
dbms_output.enable(1000000);
-- open the XML document in read only mode
v_FileHandle := utl_file.fopen('c:/OracleProject','trial.xml', 'r');
loop
BEGIN
utl_file.get_line(v_FileHandle, charString);
exception
when no_data_found then
utl_file.fclose(v_FileHandle);
exit;
END;
dbms_output.put_line(charString);
if finalStr is not null then
finalStr := finalStr || charString;
else
finalStr := charString;
end if;
end loop;
-- for inserting the XML data into the table
insCtx := DBMS_XMLSTORE.NEWCONTEXT('RIDB.TRIALZIPCODES');
insCtx := DBMS_XMLSTORE.INSERTXML(insCtx, finalStr);
dbms_output.put_line('INSERT DONE '||TO_CHAR(rowsp));
DBMS_XMLStore.closeContext(insCtx);
END;
END TRIAL;
For the first time when i complied i got the errors as :
Procedure RIDB.PROCEDURE1@RIDB
Error(16,14): PLS-00201: identifier 'UTL_FILE' must be declared
Error(16,14): PL/SQL: Item ignored
Error(29,1): PLS-00320: the declaration of the type of this expression is incomplete or malformed
Error(29,1): PL/SQL: Statement ignored
Error(33,1): PL/SQL: Statement ignored
Error(33,19): PLS-00320: the declaration of the type of this expression is incomplete or malformed
Error(36,1): PL/SQL: Statement ignored
Error(36,17): PLS-00320: the declaration of the type of this expression is incomplete or malformed
So i logged in as sys & grant the permission to execute on UTL_FILE to ridb (user):
SQL Statement:
grant execute on utl_file to ridb
So, it got compiled successfully but when i execute it gives me error as:
Source does not have a runnable target.
What does this mean?
So I browse through forum & i got to know that i need to initial the UTL_FILE_DIR ="C:/OracleProject" in init.ora
So can i edit the init.ora with notepad.When i tried to do that it says permission denied
In my system it shows the init.ora file in path C:\oraclexe\app\oracle\product\10.2.0\server\config\scripts
but there is also other file initXETemp in the same path do i need to do the changes in it.
I have tried even editing the SPFILE as mentioned below:
C:\oraclexe\app\oracle\product\10.2.0\server\dbs\SPFILEEXE - I had edit this file using notepad & set the value of UTL_FILE_DIR ="C:/OracleProject". So next time when i restarted i'm unable to log on to the database.
So i had reinstall the software again.
Could you please let me know how to proceed..

hi,
I have created the directory from sys database
CREATE or replace DIRECTORY XML_DIR2 AS 'C:\OracleProject';
& grant read,write access to the user
grant read,write on directory XML_DIR2 to RIDB;
& i had change the tag name in the xml file as shown below:
<?xml version = '1.0'?>
<metadata>
<Zipcodes>
<mappings Record="4">
<STABBRE>CA</STABBRE>
<ZIPCODE>94301</ZIPCODE>
</mappings>
<mappings Record="5">
<STABBRE>CO</STABBRE>
<ZIPCODE>80323</ZIPCODE>
<ZIPCODEEXT>9277</ZIPCODEEXT>
</mappings>
</Zipcodes>
</metadata>
TRIALZIPCODE table as shown below:
CREATE TABLE "RIDB"."TRIALZIPCODE"
(     "STABBRE" VARCHAR2(20 BYTE),
     "ZIPCODE" NUMBER(*,6) NOT NULL ENABLE,
     "ZIPCODEEXT" NUMBER
) PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ;
I have tried two methods as shown below:
Procedure 1:
create or replace
PROCEDURE TRIAL_V2 AS
BEGIN
DECLARE
-- declare attributes
charString varchar2(80);
finalStr varchar2(4000) := null;
rowsp integer;
v_FileHandle UTL_FILE.FILE_TYPE;
l_context_handle dbms_xmlgen.ctxHandle;
insCtx DBMS_XMLStore.ctxType;
cnt NUMBER;
xmldoc xmltype := xmltype( bfilename('XML_DIR2','trialxml.xml'), nls_charset_id('AL32UTF8') );
--XML_DIR VARCHAR2(40) := 'C:\\OracleProject';
BEGIN
insCtx := DBMS_XMLStore.newContext('DEV.TRIALZIPCODES');
DBMS_XMLStore.setUpdateColumn(insCtx, 'STABBRE');
DBMS_XMLStore.setUpdateColumn(insCtx, 'ZIPCODE');
DBMS_XMLStore.setUpdatecolumn(insCtx, 'ZIPCODEEXT');
DBMS_XMLStore.setRowTag(insCtx, 'mappings');
cnt := DBMS_XMLStore.insertXML(insCtx, xmldoc);
DBMS_XMLStore.closeContext(insCtx);
END;
Procedure 1 was compiled with out errors but when i execute i got the error as :
Source does not have a runnable target.
Procedure 2_
CREATE OR REPLACE PROCEDURE TRIAL_V3 AS
BEGIN
DECLARE
-- declare attributes
charString varchar2(80);
finalStr varchar2(4000) := null;
rowsp integer;
v_FileHandle UTL_FILE.FILE_TYPE;
l_context_handle dbms_xmlgen.ctxHandle;
insCtx DBMS_XMLStore.ctxType;
cnt NUMBER;
xmldoc xmltype := xmltype( bfilename('XML_DIR2','trialxml.xml'), nls_charset_id('AL32UTF8') );
--XML_DIR VARCHAR2(40) := 'C:\\OracleProject';
BEGIN
INSERT INTO trialzipcode (STABBRE, ZIPCODE, ZIPCODEEXT)
SELECT extractvalue(x.column_value, 'mappings/STABBRE'),
extractvalue(x.column_value, 'mappings/ZIPCODE'),
extractvalue(x.column_value, 'mappings/ZIPCODEEXT')
FROM TABLE(
XMLSequence(
EXTRACT(
xmltype( bfilename('XML_DIR2','trialxml.xml'), nls_charset_id('AL32UTF8') ),
'metadata/Zipcodes/mappings'
) x
END;
END TRIAL_V3;
Procedure 2 was complied without errors but when i execute i got the error as:
Connecting to the database RIDB.
ORA-22288: file or LOB operation FILEOPEN failed
The system cannot find the file specified.
ORA-06512: at "SYS.DBMS_LOB", line 523
ORA-06512: at "SYS.XMLTYPE", line 287
ORA-06512: at "RIDB.TRIAL_V3", line 12
ORA-06512: at line 2
Process exited.
Disconnecting from the database RIDB.
Could you please let me know how to proceed...

How do I recover data from my dead hard drive?

How do I recover data from my dead hard drive?

Is it dead or corrupt? There are recovery programs out there, however if your HD is head, paying pros to do data recovery is VERY costly. Some have removed the platters and installed them in likewise drives that dont have head crashes, but torque tolerances are tight, and doing it right is a bit advanced and tricky for most. Ive done HD disk swaps 4 times and had success 3 of the 4 times. It requires cannibalizing another working HD. In the future remember the golden rule, 2 copies is 1, and one is NONE.
Its likely you could find a local computer repair station that can do it for you cheaply. HD dont really "die", they have fried SATA bus, or crashed HEADS........the platters DO demagnatize over long time due to heat and degauss of the data (poor storage, etc).........but in specific, a HARD DRIVE DOESNT DIE ,.........only the flying head mechanisms that read and write the data, and SATA / bus that feeds the data DIES,.......but the data (unless corrupt or magnetically corrupted) is THERE

How to remove a node from nlb at runtime?

hello,
i need to temporally exclude a node from an nlb.
May happen that a server is up and working but the web application i'm balancing is out of sinch with the same application in the others nodes.
Eg. some static variables are not the same of the same static variables of other nodes, because of a timeout, a write error and so on but the server is still working.
in this case i need to stop the server from nlb because the information in the web application is not in sinch with other nodes.
I need to prevent users from being serverd from this out to date server, untill it will became updated, but i need to do this programmatically
how can i do it?

"DuoMi" <[email protected]> wrote in message
news:gnojbf$2sg$[email protected]..
> How to remove a node from XMLList
>
> I want remove the first node from XMLList
>
>
> and how to get the combobox all values string:
>
> <data>
> <value>2</value>
> </date>
> <data>
> <value>5</value>
> </date>
> <data>
> <value>8</value>
> </date>
>
> I need a string whit value "2,5,8"
>
> thkan you.~
I think something like
comboBox.dataProvider..value.toString()
will work.

How to remove a node from XMLList

How to remove a node from XMLList
I want remove the first node from XMLList
and how to get the combobox all values string:
<data>
<value>2</value>
</date>
<data>
<value>5</value>
</date>
<data>
<value>8</value>
</date>
I need a string whit value "2,5,8"
thkan you.~

"DuoMi" <[email protected]> wrote in message
news:gnojbf$2sg$[email protected]..
> How to remove a node from XMLList
>
> I want remove the first node from XMLList
>
>
> and how to get the combobox all values string:
>
> <data>
> <value>2</value>
> </date>
> <data>
> <value>5</value>
> </date>
> <data>
> <value>8</value>
> </date>
>
> I need a string whit value "2,5,8"
>
> thkan you.~
I think something like
comboBox.dataProvider..value.toString()
will work.

How to remove blank data from a byte array

Similar Messages

Maybe you are looking for