How to remove Blank Fields in Reports ASAP

I have a bugging problem. I have Reports 6.0 in which My address section 5 Fields of address one below the other. Report runs perfectly But when I have Address of only three lines then the middle lines are left empty. How can I shift the lines below to the Empty lines.
Please let me know Asap.

You can have the dynamic items in a frame which would shrink or grow depending on the circumstance.Now your item below this should be anchored to the frame so that it shifts itself up or down depending on the frame location.
Hope this solves your problem.
null

Similar Messages

How to supress blank fields in report ??

Hi all,
           i am trying to build a report which should give only result row infront of each customer..i dont want any keyfigure details..i tried SUPRESS RESULT in CACULATE SINGLE VALUES AS in keyfigure properties but its giving blank fields in place of single values..How do i remove this blank fields..
Any idea pls share..
regards,
Rajendra

hi gill,
          yes the layout is same as u mentioned..
           ROWS   -
COLUMNS
customer-net due date----balance-formula-formula
net due date is used as replacement path variable to calculate other formulae.
if i take out net due date from rows my formulae are not working.
i tried SUPRESS RESULT in CALCULATE SINGLE VALUES AS..its giving only result BUT in place of single values its giving me blank fields..i dont want those blank fields..:-(
regards,
Rajendra

How to remove blank pages from report

Hi All
i have a condition where i have to display the record only when trxn lines are available for that record ,inside my for each group condition i put the if condition having a count variable so if count is not zero then only the record will be displayed ,it works but problem is it shows blank pages for those records.
any clue would be very helpful.Thanks in advance
Thanks
Pratap

Hi All
The solution of this issue is given in below mentioned thread
How to avoid blank page in BI Publisher
Thanks a lot to Vestrini :)
Thanks
Pratap

WebDynpro Java: how to remove blank element from Table and Dropdown.

Hi Folks
In a webdynpro application,
I created a table and witten the below code to populate the table
     IPrivateDummyView.IFirst_TableElement First_Table_Element = null;
     First_Table_Element = wdContext.nodeFirst_Table().createFirst_TableElement();
     First_Table_Element.setF_Value("One");
     wdContext.nodeFirst_Table().addElement(First_Table_Element);
     First_Table_Element = wdContext.nodeFirst_Table().createFirst_TableElement();
     First_Table_Element.setF_Value("2");
     wdContext.nodeFirst_Table().addElement(First_Table_Element);
As per the code, i got 2 row in the table.
But , i have one Empty row on top of the table , how to get ride of this.
i find the same problem happening with dropdown too, where i used DDBI, i populated a the content as mention, but i initial 2 row as blank and then i have my own elements ,as per my code.

>
> how to remove blank element from Table and Dropdown
>
Change selection property of related node to from 0..1 to 1..1 (mandatory)
Re: DropdownByIndex and empty line (Thread: DropdownByIndex and empty line )
Re: Can the empty selection be removed from element dropdownbykey(Thread: Can the empty selection be removed from element dropdownbykey )
Edited by: Anagha Jawalekar on Nov 18, 2008 10:28 PM

How to remove blank data from a byte array

Hi All,
How to remove blank data from a byte array. Suppose I created a byte array as byte[] b = new byte[8192] and i read the data as inputstream.read(b). If the data that has been received is only 1000 bytes length, how to find out how much data has been read or how to delete that blank 7192 bytes of data?
Thanking you,
Regards,
Shankar.

1) Always try to sidestep this by allocating only the necessary amount of space required...
2) If 1 is not possible, you will have to index byte for byte how much data was read into the array which
denotes reading byte for byte... not ideal as this is relatively slow...
Are you reading from a file?

How to remove blank pages from WebI Report in view page layout option

Hi,
I am working in Business Objects XIR2 environment. I have a WebI report with several sections. I need to show the report as a book with 69 sections (each section on new page). there are 69 sections on cost center and each cost center section has almost 10 sections embedded in it. When i see in regular view - I only see 69 pages but when I try to see in "View Page Lay out" option, there is one blank page added after each results page.
Please let me know how to remove this blank page. I need to give users the option to download the book as PDF on to their machine. Now, when I download to my machine, I see one blank page after each results page.
Thanks in advance.

Jus convert your report in Page Layout mode and see if your first pafe is getting expand in the second page.
Now check if there are any cell going into second page.
- if there are any blank cell which is there after table.
you have to check formating very carefull.

How to remove blank lines in the end of list .

hi,
in a complex report ,when there are only 20 pages,and linecount is 65(2) ,in the last page only 27 lines are filled and data is completed.then blank lines are printing from 27th line to 63 line.then end of page is triggering.
so plz help me how to remove the blank lines here and immediately print the endof page.

Hi,
will this work for you.
SET BLANK LINES OFF.
These statements allow you to specify whether you want to output blank lines or not. Use SET BLANK LINES ON to output blank lines or SET BLANK LINES OFF to suppress them.
Regards
Viswanath Babu

How to remove blank pages

Dear all,
How can i remove blank pages in combind pdf in one short, if you have any idea or suggestion for remove blank pages in Acrobat. We need without blank pages counting for final page count purpose.
We tried to remove blank pages option in acrobat 9.0, but it is not use single short. It is taken more time to taken for maual work.
If you have any scripting for this? or any option having in acrobat in single short? Please help me in this regard.
Thanks
kanaga kumar. k

This can be done with a script, but a script can only assume a page is
blank if it has not text in it. It can't know if there are images or other
graphic elements in a page.

How to remove database profile in report

Hello,
We have a report right now and upon accessing it, a window asking for a Database Profile comes out. This causes the program to have additional selection parameters for Project Definiton, WBS element etc.
Before we just ran the report for Period, Year, Cost Center Group. Ever since the Database Profile appeared we now have to put * in the WBS element so that the report will run.
Anyone know how to remove the Database Profile selection? One of our users reported that this wasn't in the selection parameters and our developer said there were no changes to the report.
Are there possible reasons why the Database Profile suddenly appeared?
FYI, the report was created using Report Groups (GR51/2/3)
Thanks.

Hi,
What selection criteria you need?
Database profile is needed to access objects from Logical PS DB. You have to put at least one selection object viz. Project Definition or WBS, or Network or Activity.
Create one of your own profile as per requirements and default it in user param.
Regards,
Harsh.
Edited by: Harsh Saxena on Jul 8, 2011 1:13 PM

How to add new fields in report painter without library

Hi,.
I have to add new fields in report painter(std one) which is not in any library and so I am not able to add the fields in characteristics. Though I have added zfields in CCR1S but I am not able to add these fileds in characteristics in report painter(say - CJe3 t-code)
How to procedd for this.
Thanks,
MOhan

hi,
first i copied the report 12KST1G in my Y12KST1G with form. In CJE2 when i Click this report then in the whatever fields coming in the characteristics we can put it in 'variables' tab and these will be the fields which is displayed on the selecton screen. So after doing the wbove changes in the exit , I am not able to get the fields in characteristics vale so that I can put it in variable. or do we have to do some chnages in the screen for this z report which is like std. one.
FYI..The display of the fields was done in z-report with library but this is like a report without library and we did some chnages in the exit.
Pls Suggest

How to Handle Blank Field Value based Condition in SmartForms

Dear Sir,
In SMARTFORM , we need to define a Condition that incase Field Value is not equal to BLANK value (blank means that field is empty) then a specific text gets printed .
Our problem is that We do not know as how to define Empty Field Value based condition .
Had it been Non Empty Field value based condition then solution was simple and could be done in following way :
Field Value                        R                     Comparision Value
WA_KZDKZ                      =                      'X'
In our case , we need to give Blank (Empty Value) instead of 'X' .
Kindly help us pl .
Rgds
B Mittal

Hi,
To handle blank field values in SMARTFORMS,
Go to the conditions tab in your SMARTFORM and give condition there
Field                Comparision operator          value
<Field name>      <> Here symbol is diff     space.
eg:
wa_mara-matnr    =/                                   space.
Regards,
Santosh Kumar M.

How to remove Sorting options from Report's Column Headers.

Hi All,
When i try to run a Query in Enterprise Portal, I'm getting a " Sorting option" in each column. Thats not needed in a Report.
Kindly suggest me How to remove that Sorting options from Each colum header.
Thanks in Advance.
Regards,
Jayaprakash Jayachandran.

hi,
U can uncheck the sorting option in Navigation Pane,which will remove all sorting options.
Regards,
aanand

Data Merge for addresses, wont remove blank fields

Sometimes it works, sometimes it doesnt. Today it worked for a file, came back to it late with nothing unchanged and it wasnt working...
Im working with addresses for data merge and everyhting works fine but with the fields (like Address 2, Address 3, etc...) that are unused, I have it set to "Remove blank lines for empty fields" in the options but it will not work. Why doesnt this seem to work?

It didn't work in CS2.
I was told that it was initially broken in CS3, but later fixed (I cannot confirm as I skipped that version).
It doesn't work in CS4.
So, apparently Adobe managed to break a feature that did work, but haven't fixed it again.
-mt

How we remove some fields from SAP standard one's

Hi,
i am very new to SAP SD .if the client do not want some fields from standard one's how we can remove those fields.(example u take Standard sales order).

HI, you cannot hice many fields in SAP, since they all need for something.
try to explain this to your customer; furthermore many fields are filled form the master data so the users don't have do mind of them.
Anyway you can alter the screens using the transaction variants: go to IMG
Spro: SAPNetwaever->general settings->Field Display Characteristics->Configure Application Transaction Fields
Reward if helpful
Regards
Roberto

How to remove blank spaces in the source code of my page?

I created a page with the following code for testing:
<dsp:page>
<dsp:importbean bean="/atg/commerce/catalog/ProductLookup"/>
     <dsp:droplet name="ProductLookup">
          <dsp:param name="id" value="xprod2046" />
          <dsp:param name="elementName" value="product" />
          <dsp:oparam name="output">
               <dsp:valueof param="product.DisplayName"/>
          </dsp:oparam>
     </dsp:droplet>
</dsp:page>
It only shows the product name in the browser. But if I look at the source code of my page he created 61 lines in response to this code, where a line is the product name and the other 60 have nothing.
I know how to remove these lines that the ATG creates no content because my project is full of these empty lines.
Anyone ever had this problem and could help me?
Thanks

Hi ,
Yup this is a problem ,
you can use following ways :
1- use jsp comments eg :
<dsp:page>
<dsp:importbean bean="/atg/commerce/catalog/ProductLookup"/><%--
     ----%><dsp:droplet name="ProductLookup"><%--
          ----%><dsp:param name="id" value="xprod2046" /><%--
          ----%><dsp:param name="elementName" value="product" /><%--
          ----%><dsp:oparam name="output"><%--
               ----%><dsp:valueof param="product.DisplayName"/><%--
          ----%></dsp:oparam><%--
     ----%></dsp:droplet><%--
----%></dsp:page>
2- End tags at next line :
e g :
* <dsp:page
* ><dsp:droplet name=”xyz”
* ><dsp:oparam name=”output”
* >Name: <dsp:valueof param=”abc”
* /></dsp:oparam
* ></dsp:droplet
* ></dsp:page>
3- Always use TAB instead of using SPACEBAR whie writing source code.
4 - From JSP 2.1 onwards we have a page directive trimwhitespaces ( see if that works , i was not able to ), google for it for more info
5 - You can modify your build scripts to remove white spaces from jsps while building EAR.(complex though, as you may not want to trim all white space.)
6 - modifying the deployment descriptor.
<init-param>
<param-name>trimSpaces</param-name>
<param-value>true</param-value>
</init-param>

How to remove Blank Fields in Reports ASAP

Similar Messages

Maybe you are looking for