How to remove blank pages after endnotes?

I am formatting an academic book, and am receiving each chapter separtely, piece by piece, and each chapter is a separate file. The author wants footnote numbers in the text, but wants the references to be formatted as combined endnotes at the end of the book (not footnotes at the bottom of the page). Each chapter's footnotes begins with #1. I have inserted the footnote numbers, and then gone to the end of the chapter/document and deleted the endnote text from that chapter. However, Word still thinks that the endnotes are there and won't let me delete the extra blank pages where the endnotes text once existed. I have tried going into "Normal" and then Footnoes and removing the "endnote spearater," as well as the "endnote continuation separater": this has removed the lines, but not the pages. Any ideas? Suggestions? What if I don't insert the endnote text at all in each chapter, but simply create a new document with the end of book endnotes - woudl this work? Thanks.

HI Julie,
Are you asking about doing this in Microsoft Word? If so, a better place to ask would be the MS Word (Mac) forum at Microsoft's site. Click the link to get there directly.
Regards,
Barry

Similar Messages

  • How to remove blank pages from WebI Report in view page layout option

    Hi,
             I am working in Business Objects XIR2 environment. I have a WebI report with several sections. I need to show the report as a book with 69 sections (each section on new page). there are 69 sections on cost center and each cost center section has almost 10 sections embedded in it. When i see in regular view - I only see 69 pages but when I try to see in "View Page Lay out" option, there is one blank page added after each results page.
    Please let me know how to remove this blank page. I need to give users the option to download the book as PDF on to their machine. Now, when I download to my machine, I see one blank page after each results page.
    Thanks in advance.

    Jus convert your report in Page Layout mode and see if your first pafe is getting expand in the second page.
    Now check if there are any cell going into second page.
    - if there are any blank cell which is there after table.
    you have to check formating very carefull.

  • How to remove blank pages

    Dear all,
    How can i remove blank pages in combind pdf in one short, if you have any idea or suggestion for remove blank pages in Acrobat. We need without blank pages counting for final page count purpose.
    We tried to remove blank pages option in acrobat 9.0, but it is not use single short. It is taken more time to taken for maual work.
    If you have any scripting for this? or any option having in acrobat in single short? Please help me in this regard.
    Thanks
    kanaga kumar. k

    This can be done with a script, but a script can only assume a page is
    blank if it has not text in it. It can't know if there are images or other
    graphic elements in a page.

  • How to remove blank pages from report

    Hi All
    i have a condition where i have to display the record only when trxn lines are available for that record ,inside my for each group condition i put the if condition having a count variable so if count is not zero then only the record will be displayed ,it works but problem is it shows blank pages for those records.
    any clue would be very helpful.Thanks in advance
    Thanks
    Pratap

    Hi All
    The solution of this issue is given in below mentioned thread
    How to avoid blank page in BI Publisher
    Thanks a lot to Vestrini :)
    Thanks
    Pratap

  • How to print blank page after group change

    Hi,
    I would like to print my report like this:
    (No1)
    Page1
    Page2
    Blank Page
    (No2)
    Page1
    Page2
    Blank Page
    No3
    How can I make this?
    Thanks
    Gregor
    gt

    Insert an empty frame with a Page Break Before and Page Break After, or use these properties to see if you can get the result you want in your current layout model.

  • How to remove blank pages in SAP Script

    Hi All,
    1. Employee we have to issue the certificate and as well as terms & Conditions page. If wife is staying in different address we have to display both certificate and as well as terms and conditions page. For kids we need not shown the terms & conditions, bcz they have stayed with wife. So in my case for employee it is displaying 2 pages one for certificate and terms and conditions page, for wife 2 pages one for certificate and terms and conditions page, as per as children it should show only one page i.e certificate page only, but here it is taking terms and conditions page also but it is displaying blank page. Now my question is how to delete that blank page. Just ask your colegues who know how to delete that page.
    Regards,
    Sathvik

    Hi,
    No i am not using Duplex printer. Let me explain
    There is Employee <b>X</b> His address is 2785 and his Spouse and 3 children are not in this Address.
    When you are executing The Terms and condition is in 3rd & 4th page. if the address is change then there 2 pages has to print othere wise only certificate has to print.
    Now Employee and Spouse adreess are change that's y terms and condition is printing. Children is leaving with mom so now they don't wnt to print 2nd & 3rd page. I put condition now contents is not showing. But here blank pages are showing now i wnt remove those blank pages.
    Thanks & Regards,
    Sathvik

  • How to remove blank page in sap script

    hi ,
    I have a problem in sap script. I copied one std. script and made some changes i.e removing the unwanted pages from the script.
    no where NEW-PAGE kind of command is declared in window but still a new blank page is coming in printing.
    i checked with the posted comments in forum n what i found .. i did that part for my script..but no progress.
    so help needed.
    thnx,
    m

    Hi,
    If there is no any "NEW-PAGE" command in your any window, Pls check following probable causes.
    1. Check your main Window, may be there is blank line at the last of the main window, so check that and remove that,so you won't get the blank page
    2.Please check what have you defined as the NEXT PAGE for your first page. If so change it and make the first page itself as the next page.
    Hope it help you.
    Regrads,
    Lokesh.

  • How to Avoid blank page in SAP Script

    I am working on a Script. My Script prints a check.
    This script is a copy of a std script.
    It has 3 pages - First Next Last
    My First page has all the required data.
    My second page is empty with out any values.
    I am getting the blank page as Page 2 when executing. How can we avoid it ?
    Senthil

    Hi Senthil,
    Please see the below points:
    1. Please check what have you defined as the NEXT PAGE for your first page. If so change it and make the first page itself as the next page.
    2. Check your main Window, may be there is blank line at the last of the main window, so check that abd remove that,so you won't get the blank page
    Please see the link which is similar to your problem:
    Re: How to remove blank page in sap script
    May it helps you.
    Regards.
    Deepak Sharma.

  • Printer just started feeding a blank page after some, but not all printed documents

    Printer just started feeding a blank page after some, but not all printed documents

    Hi @cam21 ,
    I understand that you are having issues printing, after some documents you are getting blank pages. I would be happy to help you.
    I would do a hard reset to see if that will resolve the issue.
    Leave the printer on and unplug the power cable from the printer and wall outlet for 60 seconds.
    Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
    This ensures the printer is receiving full power and may help this situation.
    What application are you printing from?
    It may be a setting in the application.
    Does this happen from all applications?
    Download and run the Print and Scan Doctor. It will diagnose the issue and might automatically resolve it. http://www.hp.com/go/tools>Using HP Diagnostic Tools for HP Printers in Windows.
    How is the printer connected? (USB/Ethernet/Wireless)
    What were the results when you ran the Print and Scan Doctor? (did it print or scan, any error messages)
    If there is anything else I can help you with, just let me know.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Blank page after adding portlet from sample provider

    Hi All,
    Homepage not appearing after Login, tried adding Sample portlet to HomePage!
    I managed to configure and register the JPDK's Sample portlet provider as per the installation instructions.After configuration i tried the URL "http://yourserver/servlets/sample" and i got "Congratulations! You have successfully reached your Provider's Test Page"
    Then tried to add a sample portlet (Hellow Worls portlet) to one of the regions of the my homepage using the Navigator.
    Now, I'm not able to navigate to the home page after logging in from the portal Welcome page.
    I'm just seeing a blank page after login.
    This is the error i got in jserv.log file
    page/Unexpected exception in servlet
    java.lang.Exception: Invalid meta-data found in ProviderData process 4
         at oracle.webdb.page.ProviderData.parse(ProviderData.java, Compiled Code)
         at java.lang.Exception.<init>(Exception.java, Compiled Code)
         at oracle.webdb.page.ProviderData.parse(ProviderData.java, Compiled Code)
         at oracle.webdb.page.DataProcessor308.generatePage(DataProcessor308.java, Compiled Code)
         at oracle.webdb.page.DataProcessor308.process(DataProcessor308.java:2658)
         at oracle.webdb.page.PageBuilder.process(PageBuilder.java:684)
         at oracle.webdb.page.ParallelServlet.doGet(ParallelServlet.java:89)
    How can view the sample portlets from my home page?
    Any help would be greatly appreciated.
    Sapna

    Yes. I selected yes to Require Proxy .
    But no use. Where i'm doing wrong.
    Under Proxy settings in Global seeting i've given the following info.
    HTTP Server : alpha
    HTTP Server :80
    No Proxy Servers for Domains beginning with ALPHA
    URL Connection Time-Out (seconds) :0
    and in the provider edit page i set Require Proxy to 'YES'
    Thanks in advance
    Sapna

  • How to print blank page in script

    Hi all,
    how to print blank page in script

    Hi,
    Try the command /: NEW-PAGE. Let me know if it is working.
    Ray

  • How to add blank page to existing Document In Adobe Dc

    how to add blank page to existing Document In Adobe Dc Pro

    Hi thashrifs16749461,
    You can add a blank page using Adobe Acrobat DC by following the below instructions :-
    1) Open your existing pdf document in Acrobat DC.
    2) Choose the 'Organize Page' option form the Tools pane on the right as shown below in the screen shoot.
    3) Now at the top you will see all the tools to Organize the page, Click on 'Insert' & select 'Blank Page' from the drop-down to insert blank pages.
    *Shortcut : If you are using windows computer you can use ' Shift+Ctrl+T ' key to insert blank pages.
    In case if you experience any issue or have any query please let us know. We will be happy to help you.
    Regards,
    Aadesh

  • How to supress blank page in scripts?

    Hi gurus.
    can any one let me know how to supress blank page in scripts? When one of my condition satisfies it should print two pages and its working fine. When condition fails, it should print one page but its printing blank page as second page.
    Waiting for your answer.
    Urgent
    Regards,
    surya.

    hi,
    1. By providing the control commands in scripts,u can supress the blank pages.
    2.write the data between protect and end protect.
    3.Enclose the text that you want to prevent page-break in PROTECT... ENDPROTECT
    SAPscript will ensure that each line of this text is printed together on the same page.
    /: PROTECT
    Text
    Within
    The same page
    /: ENDPROTECT
    Regards,
    SHIVA(reward if helpful).

  • Blank page after posting a reply?

    I'm getting a blank page after I post a reply. I have to go back to my bookmark for the whole forum manually. Is this a feature or a bug? (Im using Safari)

    Bold, Italics, Underscore, Teletype, Color, etc...
    Patrick

  • How to remove the Page Item in thin Bean JSP

    Hi, I'm wondering how to remove the Page Item in JSP developed by BIBeans, since I have tried to remove the Presentation's Page Item in BiBeans Catalog, but with no result in JSP. Thank you!
    Jeff

    There are two ways to do this:
    1) If you want to remove and individual dimension from a presentation, you can hide the dimension. This can be performed directly from within QueryBuilder. Within the first section of Query Builder that shows the selected measures selected and associated dimensions, simply remove the required dimensions from the right dialog panel.
    2) To hide all page items within a presentation, simply add the following the property, pagingControlVisible="False", to the presentation tag in your JSP. For example:
    <orabi:Presentation location="Local Computer Sales/Products/KPI Sales Prior Period and Prior Year" id="BIProductKPIs_pres2" pagingControlVisible="False"/>
    Hope this helps
    Business Intelligence Beans Product Management Team
    Oracle Corporation

Maybe you are looking for

  • Can't get apps to work after ios5 update

    After doing the update for ios5, i noticed i can't open apps i have installed on my ipad2.  the apps are still there but when i click on facebook app for example the fb icon shows it being clicked on but nothing comes up.  this is the same for all ot

  • What is backed up if you are using iTunes and Windows

    I am wondering what is backed up. Music can restore from iTunes but what about calendar and contacts and photos if they were manually created on the phone. Are they stored someplace during sync and then can be restored? Where might this info be store

  • Informatica 9.1 with oracle 12c. Not able to connect to the PDB while instalation

    Dear Peers, I installed oracle 12c on my laptop. And by default PDB created, TNS entries added for the same and successfully connected to PDB. In my PDB i created two users and I am able to connect with them also. While installing the informatica ser

  • QoS Trust

    Hi, I just want to confirm the best practice with CUCM and LAN QoS. I have a CUCM 10.5 cluster attached to a 4948 edge. CUCM is marking all signalling traffic with the appropriate DSCP markings. Therefore I assume all that is required on the LAN is t

  • Error connecting in Discoverer Plus/Viewer 10.1.2

    I'm triying to connect to Discoverer Plus or Viewer. When I get to the login screen, fill all the required fields, but I got the following message: "The application encountered an invalid state. - - Nested exception: org.omg.CORBA.COMM_FAILURE: vmcid