How to remove Bridge?(Non 64-bit ver.)

I accidentally installed both Bridge and Bridge(64-bit). But I only installed Photoshop 64 bit, so I want to remove the non-64-bit one. How can I do that?

My "proposal" will cost you money. My suggestion to the OP is to get a Mac. Hoffentlich ist er (bzw. sie) nicht so empfindlich wie Sie.
Never capitalize MAC. I'm sure you know that MAC means something entirely different in computing.

Similar Messages

How to remove windows read only bit ( on a mac)

Before I bought my mac, I copied my files from my old windows machine to the mac. Now I cannot move or rename or delete these files. I have found out that windows puts a read only bit to all files which the windows explorer ignores. It seems possible to remove this bit on windows (http://discussions.apple.com/message.jspa?messageID=6349670#6349670) but I have not yet found a way to remove it on mac. Does anyone know if that is possible?

Try Paragon NTFS for Mac OS X - http://www.paragon-software.com/home/ntfs-mac/
# Paragon NTFS for Mac® OS X beats down the barriers between Windows and Mac® OS!
# Effectively solves the communication problems between the Mac® system and NTFS. Providing full read&write access to Windows NTFS partitions under Mac® OS X.
You can get a demo, and it just might give you the ability to work with those files?
B

"Phantom Remnant" - How to remove a non-existing server from Snow Leopard

I have a very strange problem that I am sure has a very simple solution, but I cannot figure it out.
Previously, my network was centered on my Time Capsule, which, due to router settings, was at 192.168.1.1. However, since moving, the address has changed, but my Mac Pro continues to look for it as a server or device.
It presents itself any time there is a network or filesystem request of any sort. So anytime I click on Finder (or PathFinder), click on a folder, file, connect to a server, etc., I get a window that pops up saying:
Connection failed
The server "192.168.1.1" may not exist or it is unavailable at this time.
I cannot figure out where the Mac stores it's list of servers that it has used in the past. I have looked through all of my apps that cause this to happen, in their preferences, and I've searched for hours on Google to no avail. It does not happen when I am using a web browser, so I don't think it's looking for the server as a DNS service, but I am thinking it is looking for the Time Capsule as a disk server or something similar.
Does anyone have any ideas of where else to look? I am comfortable at any level of editing or command line usage. I have set up networking dozens of times on Linux/Windows boxes, but I've not touched the details on my Mac (never had to before ). Is there a way to "flush" the hosts SL thinks exist?
PS: My new network setup is kind of screwy, and my router to the internet is at 192.168.1.1 internally (and in /etc/resolv.conf), but it does not have a disk of any sort inside (that is accessible at least), but I still have the TC on an internal network with 10.0.1.1 as it's new address.
TIA
Message was edited by: ramzy.darwish

This may help go into the Utilities folder and lunch Keychain Access.
Make sure you click on login and make sure the category is All Items. Delete all the references to your previous network that appears on the right hand side.

Bridge CC - 64 bit freezes when selecting a video file icon in content view

On a 64-bit PC (12 core, 64 GIG RAM) with solid state hard drive and Nvidia Quadra 4000 video card with latest driver. I have purged cache, I have reset preferences, I have changed shortcut to Run As Administrator. I've tried to find a way to run in 32-bit mode but can't find a way to do it. I've also looked to see how I can install a 32-bit version with Adobe Cloud but can't find anything. Any ideas how to stop Bridge CC 64-bit from continually freezing upon selecting a video file icon?

Hi Yammer,
Thanks for the response. From what I can tell it is all video file types. The ones I most consistently have are .wmv, .mov, .mp4. I have also changed the file associations from the default video players to VLC to see if it was a Quicktime or Windows Media Player issue and that didn't solve it.

Bapi Class HRPAD00INFTYUI - Remove option None from Account_Type_RadioButto

I am currently using ecc6/ep7.
I am using the class created from the HRPAD00INFTY Bapi. The screen field Account_type_RadioButton has 3 options. They are
   1) Checking
   2) Savings
   3) None
Checking is marked as the default.
I need to eliminate the "None" option. I need to be able to use the other 2 options. Through personal modification using the Bank Information Iview, I can make the field, Account_Type_RadioButton", invisible. I need to make the option None invisible. I can't do that by modifying the iview by previewing it. I'm thinking that I need to do this by using the INPUT_CONVERSION method or OUTPUT_CONVERSION method of the HRPAD00INFTYUI class. I've looked at the SAP documentation at
"http://help.sap.com/erp2005_ehp_04/helpdata/en/43/304ad229990b19e10000000a1553f6/frameset.htm" relative to the input and output conversion methods.   I also found another good example of code using the Input_conversion method found at "ESS Bank Iview I'm still grasping at straws trying to figure out how to remove the 'None' option from the Bank Information screen.
Code samples or suggestions using these two methods would be invaluable to me.
Any suggestions would be greatly appreciated!
Thanks,
Mike

The radio buttons for account type are not populated from the backend and I don't think making changes in HRPAD00INFTYUI will work.
These are built using the webdynpro code shown below.
Webdynpro changes are required:
Comment the following lines of code in the method supplyAccount_type_radiobutton of DetailView in the Webdynpro Component VcPerBankUSDetail as shown :
public void supplyAccount_type_radiobutton(IPrivateDetailView.IAccount_type_radiobuttonNode node, IPrivateDetailView.IContextElement parentElement)
    //@@begin supplyAccount_type_radiobutton(IWDNode,IWDNodeElement)
     Collection coll = new ArrayList();
     IPrivateDetailView.IAccount_type_radiobuttonElement elementRadio0 = wdContext.createAccount_type_radiobuttonElement();
     IPrivateDetailView.IAccount_type_radiobuttonElement elementRadio1 = wdContext.createAccount_type_radiobuttonElement();
     IPrivateDetailView.IAccount_type_radiobuttonElement elementRadio2 = wdContext.createAccount_type_radiobuttonElement();
     elementRadio0.setText(wdThis.wdGetAPI().getComponent().getTextAccessor().getText("Checking"));
     elementRadio0.setValue("01");
     coll.add(elementRadio0);
     elementRadio1.setText(wdThis.wdGetAPI().getComponent().getTextAccessor().getText("Savings"));
     elementRadio1.setValue("02");
     coll.add(elementRadio1);
/// zzz changes - hide the bank type none
//     elementRadio2.setText("None");
//     elementRadio2.setValue("");
//     coll.add(elementRadio2);
     node.bind(coll);
    //@@end
Thanks,
Shanti

How to remove credit card information when the none button is not available?

The None button doesn't show up when I edit my billing information. Help?

Maybe:
How do I remove my credit card...: Apple Support Communities
How to remove credit card details?...: Apple Support Communities
Some uses have said they could not.

How to remove credit card details? "None" option not there.

I have read discussions on how to remove your credit card because I recently deactivated it, however supposedly there is a "None" option to press to take your credit card off, however it does not appear on my computer. I live in the united states. please help

You can change your billing info to another card if you'd like. Otherwise, you can also redeem a gift card as you had asked.
Apple ID's aren't associated with iPods. If you want to set up an start using a new Apple ID on your iPod, you can head to Settings -> Store and tap Sign Out. Then sign in with your new account.
Keep in mind that all previous purchases made with the old ID are permanently attached to that ID. So if you have an app with an update that was purchased with the old ID, you'll need to use the old ID credentials to update it.
B-rock

TS1646 How to remove credit card details? "None" option not there

How to remove credit card details? "None" option not there

Same here I can't update or download anything

How to get Bridge-hosted ACR to always open 32-bit PS?

I am using CS4 on the 64-bit version of Windows 7. Does anyone know how I can force ACR to use the 32-bit version of PS instead of the 64-bit version when using the "Open in Camera Raw" method from Bridge?
I have made file association and registry changes so that everything else (double-click a CR2 file in Bridge, using Open, etc.) uses 32-bit PS. When I use the ACR hosted by Bridge via the "Open in Camera Raw", however, and then do an "Open Image", ACR will always use the 64-bit version of PS unless the 32-bit version of PS is already open.
I am trying to form a new habit of using the PS-hosted version of ACR with the "Open" command but it is a hard habit to break. It also takes a little longer the first time I use ACR. I´d love to use 64-bit all the time but I have third-party filters that work only on the 32-bit version.
Any ideas?

Plain advice: open Bridge, open 32-bit PS,
and when we then open a file in/from Bridge it goes (via ACR) into 32-bit PS.
Peter

When trying to download yosemite it sais that i do not have enough memory. when i look at my memory use it shows that 111.00gb of space is used by movies but when i go th the movie folder it is empty. how can i remove the non existant movies.

when trying to download yosemite it sais that i do not have enough memory. when i look at my memory use it shows that 111.00gb of space is used by movies but when i go th the movie folder it is empty. how can i remove the non existant movies.

Freeing Up Space on The Hard Drive
1. See Lion/Mountain Lion/Mavericks' Storage Display.
2. You can remove data from your Home folder except for the /Home/Library/ folder.
3. Visit The XLab FAQs and read the FAQ on freeing up space on your hard drive.
4. Also see Freeing space on your Mac OS X startup disk.
5. See Where did my Disk Space go?.
6. See The Storage Display.
You must Empty the Trash in order to recover the space they occupied on the hard drive.
You should consider replacing the drive with a larger one. Check out OWC for drives, tutorials, and toolkits.
Try using OmniDiskSweeper 1.8 or GrandPerspective to search your drive for large files and where they are located.
You will need a minimum of 10-12 GBs of free space to install Yosemite, however, that is a bare minimum and should be at least twice that amount.

How do you remove unwanted non mac icons from menu bar? ie. mcafee

how do you remove unwanted non mac icons from menu bar? ie. mcafee

Yep. MacKeeper is a nasty program.
See: http://applehelpwriter.com/2011/09/21/how-to-uninstall-mackeeper-malware/
Phil Sokes' website.
http://www.reedcorner.net/beware-mackeeper/

How to remove in Lyon a powerpc application non-compatible

I installed an Maxtor App, and I didn't know it was a PowerPC app, after this I've been receiving a message I can't remove: "NotificationExec can not be open because PowerPC apps are not longer compatible". Somebody knows how to remove the message, after the application has been removed...

Have you deleted the Maxtor app already? If so, I suspect you didn't succeed in deleting it completely, and NotificationExec was left behind.
If the Maxtor app used an installer program, run that installer again and reinstall the Maxtor software. Then run the installer again and look for an "uninstall" option in it. If you find one, run it.
If the Maxtor software didn't use an installer program, go to System Prefs > Accounts, select the account you normally use, and click the Login Items tab. Is NotificationExec or anything else that you recognize as part of the Maxtor software listed among your Login Items? If so, delete it from the list.

Bridge CS3 - How to remove?

Am trying to clear up space on my laptop and in doing so searched for a way to remove Bridge as this is one application that I don't use at all on that machine. However, Bridge doesn't appear at all in the Add/Remove programmes list (Windows XP2 Pro) which has thrown me somewhat. I then attempted to remove CS3 hoping that Bridge would appear in an options list which of course it doesn't :-( so had to back track from there as well. Has anyone got any suggestions please?

I just took a look at my CS4 installation. The Bridge executables directory takes up 144mb. Not that terrible really in this day and age.
If you happen to have either the "Goodies" or "Documentation" folders in Program Files>Adobe, you could consider backing up and deleting those. It might give you about that amount of space if you really need to free up every last megabyte.

How to remove tv card from touchsmart 610_1010

The tv card in my touchsmart 610_1010 as stopped working the device manager says it is working and I've uninstalled it and reinstalled but the media centre says it cann,t detect tv tuner ' I was thinking of doing a card removal and reinstall , can any one point me in the right direction of a video off how to remove tv card , or any solution. Thanks for your time any help would be appreciated. ...thanks

Hello tangledup61,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand you are looking to replace your non-functioning TV Tuner Card in your Touchsmart 610. I would be happy to assist you, but first I would encourage you to post your product number for your computer as I was unable to find your model with the information you already provided. I am linking an HP Support document below that will show you how to find your product number. As with this we can provide you with accurate information.
How Do I Find My Model Number or Product Number?
Please re-post with the requested information and I would be happy to provide you with assistance. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Abobe Bridge CC (64 bit) is trying to default to a deleted version of Photoshop (CS2) instead of the Photoshop CC 2014 version of suites

Abobe Bridge CC (64 bit) is trying to default to a deleted version of Photoshop (CS2) instead of the Photoshop CC 2014 version of suites
How/where do I change the default for File>Open With>Photoshop? i haven't had Photoshop CS2 installed since the first CC 2014 version, and it was working fine until this last update last month.

DeneseLewis have you tried removing and reinstall Bridge CC? You can find more details regarding the install and uninstall process at Install and update apps - https://helpx.adobe.com/creative-cloud/help/install-apps.html.

How to remove Bridge?(Non 64-bit ver.)

Similar Messages

Maybe you are looking for