How to remove characteristic or value field in operating concern?

Hi all,
As I have duplicated one value field in my current operating concern so I want to remove it from operating concern then delete it.
I use KEA0 --> change operating concern --> but all value fields are in blue color and I cant not remove it.
Thanks in advance.
BR,
Emily

Hi
Check you are in Change mode and then try Extras - Unlock Characteristics/Value fields
Thank You,
Edited by: SAP Student on Mar 25, 2009 6:31 AM

Similar Messages

Remove Value Field from Operating Concern

Hi all,
I created a new value field in DEV and assigned it to the corresponding Operating Concern.
Now, after some discussions, it is not necessary this value field.
I want to "un-assign" from the Operating Concern they use.
No data is being posted to this value field and nothing has been transported to QA yet.
Is this possible? Any ideas?
Thanks and Regards,
Flower.

I guess you can delete the value field as it was not transported to QA and PRD.
Here is some information given by SAP.
Deleting characteristics/value fields from an operating concern
You can delete characteristics and value fields retrospectively from an operating concern that you have already activated. However, you should only use this deletion function for operating concerns that have not yet been used productively. You should also note that some database systems require the operating concern tables to be converted (database conversion) after the deletion has taken place if data had already been posted to the operating concern. Depending on the data volumes involved, the database conversion can take a matter of seconds or indeed several hours. Moreover, you cannot post data or run reports during the conversion. Due to integration, other applications are also affected when data is postedwith an assignment to profitability segments (such as settlement and direct assignment from FI/MM). If the operating concern has been transported to another system (such as the productive system), then the database conversion must also occur in that target system.
Depending on the fields that were deleted, the following tables need to be converted (where xxxx = operating concern):
Characteristics: CE1xxxx, CE2xxxx, CE4xxxx, CE4xxxx_ACCT, CE4xxxx_FLAG, and CE4xxxx_KENC
Amount fields: CE1xxxx, CE2xxxx and CE3xxxx
Quantity fields: CE1xxxx, CE2xxxx, CE3xxxx, CE4xxxx, CE4xxxx_ACCT, CE4xxxx_ACCT, CE4xxxx_FLAG, and CE4xxxx_KENC
Before deleting fields from an operating concern with a large data volume (more that 10 000 records in a table), you should refer to the section "The Database Utility" in the ABAP dictionary documentation. This section describes the database conversion process.
For database systems that do not require conversion (such as DB2 for AS/400, Informix, MSSQL), it can still take a considerable amount of time for the operating concern to be activated.
To delete characteristics or value fields, perform the following activities:
1. Delete the corresponding characteristics and value fields from Customizing in all clients (this includes forms, reports, planning layouts, and so forth). To locate characteristics and value fields, use the appropriate where-used list in the Customizing Monitor. You can access it by choosing Tools -> Analysis -> Check Customizing Settings. You can jump directly from the where-used list to the relevant Customizing transaction and then delete the appropriate field there.
2. Switch to the screen for maintaining the data structure of an operating concern (Maintain operating concern).
3. If you need to effect other changes to the datastucture for the operating concern before making any deletions, effect those changes and save the data structure.
4. In order to be able to select the fields of the data structure, choose Extras -> Characteristics (or Value fields) -> Unlock.
5. Select the characteristics and value fields to be deleted and remove them from the data structure with the "Reset fields" function.
6. Reactivate the operating concern. The system starts by checking whether the operating concern contains any data and whether the fields to be deleted are still being used in any Customizing settings.
7. If none of the fields are still in use, the system then starts the re-activation. If the operating concern does not contain any data or does not require the database system to be converted, the tables are activated. You are then able to activate the environment for the operating concern. In this case, the following activities no longer apply.
If the operating concern already contains data, a system message tells you that the database needs to be converted. If you proceed, an activation log appears (at the top of the list).
8. Analyze the activation log. If it only contains error messages telling you to convert the tables, proceed with the next activity.
You must otherwise remove the cause of the errors before the tables can be converted. In this case, you should answer "No" to the next prompt, which asks whether the conversion transaction should start.
9. If you still only receive error messages telling you to convert the tables, choose "Back" and start the conversion.
10. Plan a job for the conversion. A list of the tables to be converted is shown for this. If the tables only contain a small amount of data (less than 10 000 records), then all the tables can be converted in one job. In that case, you can select all the tables.
For larger tables, conversion should take place in several jobs. However, you should ensure that table CE4xxxx (where xxxx = operating concern) is the last table to be converted.
Warning. No other changes can be made to the operating concern during the conversion.
A copy of the table is generated during the conversion. The database system should have sufficient memory available for this copy.
To schedule conversion as a job, use the "Schedule selections" function. You can display the current status of the conversion by selecting the "Refresh" icon. Tables disappear from the list once they have been converted sucessfully. If a conversion is taking a while, it is also possible to leave the transaction. You can then continue the conversion using DB requests -> Mass processing in one of the following ways:
With the job overview. You access this by choosing System -> Services -> Jobs.
Using the database utility transaction. You access this by choosing Utilities -> Database Utility in the ABAP Dictionary menu.
You can use the status function to call up the status of the operating concern during operating concern maintenance. You need to activate all tables after conversion.
11. To analyze errors that have occurred during the conversion, you can use the database utility transaction by choosing Extras -> Logs. The log has the same name as the conversion job: TBATG-date. You can also restart the conversion with this transaction.
For more information on the database utility, choose Help -> Application help while still in the above transaction.
12. Once you have activated all the tables in the operating concern, generate the operating concern environment from within operating concern maintenance.
You can then use the operating concern again.
If you want to transport the operating concern into a different system, see the section "Notes on transport"
Note
Hope this helps
Thanks,
Reddy
Edited by: reddy sap on Sep 11, 2009 6:58 PM
Edited by: reddy sap on Sep 11, 2009 7:00 PM

Add value field to operating concern

Hello,
I have created a new value field VV955 and want to add it to my operating concern in transaction KEA6.
I go into change mode for all value fields for my operating concern and add a new line with my value field. When I hit the save button, it says "Field VV955 exists as Val. fld in field catalog -> choose another name".
Also when I go into change mode in KEA0 where you can drag value fields from left to the right, the value field is blue which means I cannot assign it to my operating concern.
Any suggestions?
Thanks
Anne

Hi,
While creating value field it will only consider long text. Inoperating concern Data structure in KEA0 you can assgin value field it will display in blue first, when you select to data structure you can see value field and save the value field.
Regards,
Sreekanth

How to remove the default value of "Inventory No." in Equipment Master

Hi Experts,
Need your advise
How to remove the default value for the field "Inventory No" in Equipment Master? It will goes back to the default value(TRANSIT) when i delete or change the value.
Thank You
Best Regards

i think you cannot default this value from configuration, check is there any screen variant exist for your transactions IE01/IE02, else may be any user exit is active on the equipment master transactions.
Take help of your ABAPer and verify the above.
Praveen.

Characteristic and value field in profitability analysis document

hi,
1 in VF03, when i click the accounting button, i got the profitability analysis document.
when i click on it, it shows display line items with tabs like characteristic and value fields.
may i know where i can see the characteristic and value fields defined where each time when i click on profitability analysis document, i get the list of characteristic and value field.
2 also if open FB03, can see the profit segment. the characteristic and value defined in where?
any tcode or spro that can show how the characteristic and value defined in profit segment.
thanks

Hi
Pleaase go through the below mentioned links. It will give you a better insight on the topic you want information about.
http://help.sap.com/saphelp_erp60_sp/helpdata/en/7a/4c38334a0111d1894c0000e829fbbd/content.htm
http://help.sap.com/saphelp_erp60_sp/helpdata/en/7a/4c388e4a0111d1894c0000e829fbbd/content.htm
http://help.sap.com/saphelp_erp60_sp/helpdata/en/7a/4c389b4a0111d1894c0000e829fbbd/content.htm
Hope this helps. Let me know if you have any questions.
Karthik

How to create Formula based value field in COPA

Hi,
I want to know how to create formula based value field in COPA
My Requirement is i want to collect some value in formula based value field and want to use in copa allocation cycle as a tracing
factor.
anybody give some light on the same topic or requirement ?
Thanks
Nilesh R

The key figure you are creating in KE2K is not a value field, i.e. you can't post to it and you can't use it in a report. It is a caluculated value that can be used only in assessment and top-down-distribution.
In Ke2K, enter a name for your key figure, then click on the the white sheet button to create it. Now the formular area is open for input. Input your formular (e.g. VV001 + VV002 - VV003 .... where VVXXX are the technical names of value fields).
Now click the "check formuar"-button. Then save.
Before you can use the key figure in assessment, execute TC KEUG.
Now the key figure is available as any value field in the tracing factor selection of your assessment cycle.
I hope this made it clearer.
Regards
Nikolas

How can I pass a value field to a global variable?

I have a doubt,
I wnat to know if is possible to pass a value field to a global variable inside of DataFlow?
That a try to do is at the time to execute a JOB on line (real time), depending of the value field that i receive, only certain DATAFLOWS will be executed depending of the value field.
I hope you can help me.
Kind regards!!!

It can be done via various ways, your approach is kind of odd, though.
You are saying you have one kind if Input message, depending on the flag you want to do different transformations. The way you envision that is by loading that flag into a global variable and use different dataflows then.
Can you use different dataflows within one Realtime Job? Yes, usually the first loads an in-memory datastore.
Can you write into a global variable? Yes and No. Not directly, but you can write the value into e.g. a database and using the sql() function read it from there. But why would you. You could write it into the in-memory datastore. And then you run your n dataflows, each has a filter. So only one of these dataflows will actually process the data.
Are there other approaches? I would have a Case transform at the beginning and route the data into different queries depending on the data. So all in one dataflow. Your approach is fine for a batch dataflow where a dataflow is started, does something and then ends. But that's not how it works in Realtime!

How to remove space before value in Excel

Hi,
Have to send mail with Excel attachment.
for that SO_DOCUMENT_SEND_API1is using.
Just concatenating data to Contentents_BIN Structure with cl_abap_char_utilities=>cr_lf to get record by record.
But i'm getting space in seoncd record first cell along with value.same things for next records aswell.
How to remove that space in excel attachment?

Hi,
Is the value right aligned? If you pass any whole number or decimal number values to the excel sheet, it will be displayed in right aligned format in excel sheet. What is the type of the value that you are passing to the excel sheet.
Thanks & Regards
Rocky

Create characteristic and value field in kea0

Hi there,
I am writing a doc about above mentioned subject and wondering if somebody can inform me, if there are certain standard points I have to considerate like, for e.g. regenerate the system?
Thanks,
K.

Hi Kristina,
Creation of COPA data structure must be defined very carefully. Please note that adding value fields and CHARs are very easy in COPA but removing them is just near to impossible. Also you must remember that there is a limit of Max 120 value fields and 50 Characteristics in standard SAP. You can check note 160892 in case you want to increase the limit. The other thing you should take into account is it should be possible to regenerate the operating concern in KEA0 before and after the changes to the data structure. COPA will not generate any transport request for these changes automatically so you need to transport them viw transaction KE3I. In case you have added a new Characteristics and you want to update the historical data as well you should take help of reallignment (KEND). For value fields you need to repost the documents through KE4S, KE4ST, KE4SFI and KE4SMM.
I have tried to give some details if you need more information please let me know.
Regards,
Abhisek

Ajax framework : how to remove the Trex search field ?

Hi community,
I am trying to remove the TRex search field in an ajax framework. As for the "normal" framework I make not visible the tool page, even in the headerless framework, but it is still displaying...
Has someone ever face this problem ?
Thanks a lot.

Hi Fabien
I am not sure if i got your question currectly
In general on the Ajax Framework page there is the masthead iview
On the masthead iview there is a property "Enable Search" that allows you to enable and disable the search box in the page.
Please try to use it
There is now search box of the framewrok in headerless window
the search box is probably part of the application.
Regards
Oz

Amount field in Operating Concern

Hi,
What is the field name for the Amount in the Operating Concern?

Nagi,
Check the data structure of your operating concern at KEA0 and look for the value fields available. Typically is the sales quantity, but you could define or add other quantity fields, as needed.
Hope this helps.
Regards,
GG

How to check for null value/field?

Hi!
I have created a form that is designed to calculate the rows using the FormCalc function.
My problem is that if I have no value in the some of the rows, a 0 is automatically display as the calculated output field. If a row has no data, how can I get a null or blank field in the result (calculated field) field?
Let's say, I have 5 rows and each row should have a calculated value in one of the fields; when I fill out only two of the rows, the remaining three rows come out with 0s in the calculated output field. I need a blank output field for the remaining calculated values instead of 0s. I am a newbie so please excuse me if I am not explaining well.
Thanks
Jofar1

This is the value that I have on my calculate event: "Rate*Units_of_ServiceRow2".
How should/can I incorporate the two codes?

How to remove sender name in field "From" in Notification page

I would like to remove name ( LIUNI, ANTONIO_ ) (bold text and underline) from message and field "From" in notification page.
I have 2 problems below:
1.) This message "_*LIUNI, ANTONIO*_ has completed their appraisal of KERINS, ANNE MARY"
Should change to "A multirater has completed their appraisal of KERINS, ANNE MARY"
2.) Field From, must be blank: From: LIUNI, ANTONIO_ -> From: <Blank>
It call standard workflow HRSSA.
Please provide me coding in controller to set item attribute values in field "From" to blank and remove sender name in message+
Below is the example notification:
This notification does not require a response.
LIUNI, ANTONIO_ has completed their appraisal of KERINS, ANNE MARY.
Personalize "Notification Details Function"
Personalize "Notification Details Attributes"
Personalize Table Layout: (leftTable)
From LIUNI, ANTONIO_
To BILLOUD, CLAIRE
Sent 26-Apr-2010 09:53:06
ID 66666475
Personalize Stack Layout: (rightStack)
Personalize Table Layout: (rightTable)
Personalize Stack Layout
Personalize Stack Layout
Personalize "Summary"
Edited by: jamras on Apr 26, 2010 1:34 AM

Thank you for your reply.
Do you mean region in notification page?
Below is region in notification page.
Field From is in Region: /oracle/apps/fnd/wf/worklist/webui/NtfDetailsAttr.leftTable
Document Name /oracle/apps/fnd/wf/worklist/webui/NtfDetailsAttr
Message is in Region: Notification Details Function
Document Name /oracle/apps/fnd/wf/worklist/webui/NotifDetailsRG
Now I'm working on extension controller in the page below (I'm submit button in this page).
/oracle/apps/per/selfservice/appraisals/webui/PartCompletePG
My controller -> fao.oracle.apps.per.selfservice.appraisals.webui.FaoPartCompleteCO
I put the following coding in this controller. It removed value in workflow attribute, but it didn't remove value from notification page.
SSHRParams sshrparams = new SSHRParams(oapagecontext.getRootApplicationModule());
String wfItemType = sshrparams.getItemType();
String wfItemKey = sshrparams.getItemKey();
// String wfProcess = "HR_APPRAISAL_DETAILS_JSP_PRC"; ///sshrparams.getProcesName().toString();
wfClass.setItemAttrText(oapagecontext, wfItemType, wfItemKey,
"HR_APPRAISAL_FROM_USER_ATTR", "");
wfClass.setItemAttrText(oapagecontext, wfItemType, wfItemKey,
"FORWARD_FROM_USERNAME", "");
wfClass.setItemAttrText(oapagecontext, wfItemType, wfItemKey,
"FORWARD_FROM_DISPLAY_NAME", "");
wfClass.setItemAttrText(oapagecontext, wfItemType, wfItemKey,
"FORWARD_FROM_PERSON_ID", "");
wfClass.setItemAttrText(oapagecontext, wfItemType, wfItemKey,
"HR_APPRAISAL_FROM_NAME_ATTR", "");
Thank you for your help.

How to remove space between two fields in emergency primary contact.

How Can I remove a space between the two fields.IN emergency primary contact there are certain field called "C/O" and a i have added one text for this field inside that.But it is taking a big space between the "C/O" field and the text view.Plz suggest how I can re,move this?Also How Can I add new transparent container with the end user personalization in the emergency contact field.

Hi Peddi
In my structure pannel I have simpleSearchPanel below that only i have the two lov fields ex: emp_no and emp_name . how to set the spacer between this From which Region where can find the spacer bean what proerty do i need to set
Thanks
AT

Sun IdM: How to set a multi-value field on document.mainform via javascript

The following will set variables.variable1 to variables.variable2 when the "Script Link" component is clicked. I would like to modify
this so that el2 references a multi-valued element (e.g. a list generated by a Select Field)
<Field>
<Display class='Javascript'>
<String>
function myScript() {
el=getElement(document.mainform,"variables.variable1");
el2=getElement(document.mainform,"variables.variable2");
el.value=el2.value;
</String>
</Display>
</Field>
<Field name='Script Link'>
<Display class='Link'>
<Property name='URL'>
<String>javascript:myScript();submitCommand(document.mainform,%20'Recalculate');</String>
</Property>
</Display>
</Field>
My issue is, if variables.variable2 is a list / multivalued, i get errors trying to traverse through the "array".
How can i read and set a list element via the javascript function above? I've tried things like get(), put() , as well
as path expressions like variables.variable2[0] .
any help would be appreciated....
is there an API somewhere i can reference?

The MultiSelect field-type is a little different than the rest of the fields. If you use the applet version, then selecting/deselecting values cannot be captured by referencing the field directly in javascript.
The way to identify the selections is to use the javascript methods includes/MultiSelect.js file (IDM form submission uses the same method):
fixMultiSelectAppletBeforeSubmit( )
fixMultiSelectNonAppletBeforeSubmit( )
.. and then referencing the "<multiselect-field>_selected" form element.
So in your case, the code should look something like this:
function myScript() {
    fixMultiSelectAppletBeforeSubmit(document.mainform,"variables.variable1");
    var el1 = getElement(document.mainform,"variables.variable1_selected");
    // assign the value to variable2..
    el2 = getElement(document.mainform,"variables.variable2");
    el2.value = el1.value;
}Just make sure ":variables.variable2" is not a multi-select field, else the value set here will be reset during form submission.
Adi
[www.xpressutils.com|http://www.xpressutils.com]

How to remove characteristic or value field in operating concern?

Similar Messages

Maybe you are looking for