How to remove conversion routine "ABPSN"

Dear gurus,
In my transfer rules, under the tab "DataSource/Trans. Structure", I have a field PSPID whose "Conversion Routine" has the value "ABPSN". This conversion routine converts the external format to the SAP format which, however, is not what I want. I want to remain the original format so I need to remove this "ABPSN" conversion routine. When I double clicked it, it linked to the InfoObject 0PROJECT maintanace screen. On that screen, I removed the conversion routine "PROJ" for 0PROJECT, but still ABPSN remains and the data loaded into the InfoCube have been converted.
So how can I remove this ABPSN convertion routine?
Thanks in advance.
Jin Ming

Hi Jin Ming,
Conversion Exit ABSPN is related to WBS element and not project at R/3 side.
But at BW side this routine internally calls Project routine .
The Process is,
1. Delete all transactional data , from related ODS & Cube wherever 0PRoject is used .
2. Delete master data from 0Project.
3. Change object 0Project remove the conversion using Tcode RSD1.
4. Load master data for 0Project.
5. Load transaction data.
Hope that helps.
Regards
Mr Kapadia

Similar Messages

How to write conversion routine for key figure?

Our customer has this requirment:
we need to know the last time of some TV program in BEx report, If a TV program last 500 seconds, we need show the key figure like this: 00:08:20, If a TV program last 100000 seconds, we need show the key figure like 27:46:40 (27 hours and 46 minitues and 27 seconds), If we define a key figure as time, BW system will report a error that say it is not acceptable time. If we want to define a integer, but we need display it like hhmmss format. We know we can write conversion routine for char. but I don't how to write conversion routine for key figure.   Please give me any hint if any other solutions?
Edited by: SY DONG on Dec 2, 2010 3:36 AM

If you want to do in Transformation Layer :
You can use routine ...break up the seconds into minute hour and seconds
you will have to handle few cases in this:
let say your variable lv_seconds holds the number of seconds you want to convert to hour min and seconds
DATA: lv_seconds type i,
           lv_hrs type i,
          lv_sec type i,
          lv_min type i.
lv_hrs = lv_seconds / 3600
if lv_hrs >= 1.
lv_min = (lv_hrs - trunc(lv_hrs))*60
here again handle seconds if min >60.
else.
lv_hrs = '00'.
lv_min = lv_hrs*60
It is just hint ..how you can manipulate the seconds to get it...you will have to think about the complete algorithm
Regards,
RK

How to use conversion routine?

hi,
in my z-table i have a field called matnr for the material number say.
its domain defines it as 18 char.
say i have created an entry say 200.
so it will be saved may be as 000000000000000200.
i want it should be displayed with as 200.
and if i search for say 200.
so it should not look for the proceeding zero's.
it should not give me an error that record doesn't exists.
please tell me how to use exaclty conversion routine.
thanks
ekta

hi all,
the problem has been solved.
CONVERSION_EXIT_MATN1_OUTPUT   this FM module can only be used where the z-table has matnr of the type MATNR the standard matnr of the table mara.
so in my program it was not working.
my data element was not matnr.
i had used a popup for position finder.
so it could not read the material number which had zeros as prefixes.
thanks for all the help
thanks
ekta
below the code is mentioned...................
*******************************C O D E*******************************************
    WHEN '&POS'.
      popup_title       = 'Choose The Material Number'.
      CLEAR it_fields.
      it_fields-tabname    = 'Z10ET_TAB_MAT01'.
      it_fields-fieldname = 'MATNR'.
      it_fields-field_attr = ' '.
      it_fields-field_obl = 'X'.
      APPEND it_fields.
      CALL FUNCTION 'POPUP_GET_VALUES'
        EXPORTING
          no_value_check = 'X'
          popup_title     = popup_title
          start_column    = '5'
          start_row       = '5'
        IMPORTING
          returncode      = returncode
        TABLES
          fields          = it_fields
        EXCEPTIONS
          error_in_fields = 1
          OTHERS          = 2.
      IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
      IF returncode = ' '.
        MESSAGE i036 WITH it_fields-value.
        SORT it_material_data BY matnr.
        READ TABLE it_material_data INTO wa_material_data
                        WITH KEY matnr = it_fields-value.
        IF sy-subrc = 0.
          tab_ctrl1-top_line = sy-tabix.
          REFRESH it_fields.
          CLEAR returncode.
          CLEAR ok_code_0101.
        ELSE.
          CONCATENATE concat it_fields-value INTO v_matnr.
          READ TABLE it_material_data INTO wa_material_data
                          WITH KEY matnr = v_matnr.
          IF sy-subrc = 0.
            tab_ctrl1-top_line = sy-tabix.
            REFRESH it_fields.
            CLEAR returncode.
            CLEAR ok_code_0101.
          ELSE.
            MESSAGE i037 WITH it_fields-value.
            REFRESH it_fields.
            CLEAR returncode.
            CLEAR ok_code_0101.
          ENDIF.
        ENDIF.
      ENDIF.

How to "Custom conversion routine" in BW

Hi team,
The R3 table level field has converion routine which stores the value as "A" .
When you display this in application (or) using ALV, it shows as "AB". There are custom function modules behind this conversion routine.
In BW, when we extract until PSA, we are getting "A".
I see the option at Info object level to write" conversion routine" but how and where to start this conversion routine in BW.
In BW, we want to show "AB"
Thanks
Angelo

Hi,
this problem is solved in transformation PSA to InfoObject using formula or routine.
Regards,
Conrado
www.forosap.com
Spanish SAP Forum Administrator
Edited by: Conrado Linquet on Mar 29, 2010 5:54 PM

How to reset Conversion Routine NUMCV in InfoObject

Dear all,
In order to test, I deleted the Conversion Routine NUMCV in tab General of an InfoObject. And now I'd like to reset it as NUMCV. A message says: Conversion Routine NUMCV was deleted.
How can I resolve it?
Thanks a lot in advance

Thanks for your answer.
I've tried to create a new InfoObject, but everytime when I choose "Data type" as NUMC and then choose "Convers. Rout" as "NUMCV", it's said : Conversion Routine NUMCV was deleted.
Do you have any idea?

How to remove  using routine in Transformation

Hi,
I am getting error of Invalid charcteristic of ( ) while activating data in DSO. please let me know how to solve it.

http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/22741
Regards,
Sushant

Conversion Routines

How to use Conversion Routines in Production Support?What is Conversion Routine?How it is Working in real time?

hi..
i'm not too sure abt it.. check out if the below helps ya.
you can create customer routines. According to OSS Note 41474 it is safe to create a function module that has the conversion exit naming standard (Begins with CONVERSION_EXIT*). You will get a warning that you can ignore. The important part is to have the first letter of your rountine name begin with Z or Y. That way you won't have a conflict with SAP. An example would be:
CONVERSION_EXIT_Z0001_INPUT .
i browsed n found these details as none had answered ur question.

What does CUNIT, ABPSP & ABPSN conversion routines do?

What does CUNIT, ABPSP & ABPSN conversion routines do?
There is no help on SAP documentation on how these conversion routines work?Can someone tell me in simple english on how to they the padding logic.
Something like if <b>all numeric</b> then <b>pad spaces on the left side</b> etc
thanks
Rao

Hi Rao,
I can help you with CUNIT. SAP manages units of measure in an internal and external format. That its, when it is saved in database, it uses a code (for example for units it uses ST), and when it shows you the value, it uses another one (in this case UN). So, what basically does CUNIT conversion routines (A.H.P mentioned the function modules) is to switch between those formats.
Hope to help!
Regards,
Diego

How to transport InfoObject Conversion Routine

Hi,
I am using an existing coversion routine to my InfoObjects, this conversion routine is a custom object which already existed in Dev created by someone and i have just used it for my InfoObjects, now how can i transport this conversion routine to CONS, is it enough if i just transport the INPUT and OUTPUT function module.
Thanks
Akila. R

hi Just go to the transport Connection, select the infoobjet automatically the conversion routines will be associated with it no need of collecting it seperately .
for example
ALPHA conversion is used in the BW system for each presetting for character characteristics. The ALPHA conversion routine is registered automatically when a characteristic is created. If you do not want to use this routine, you have to remove it manually.
The ALPHA conversion routine is used, for example, with account numbers or document numbers.
For conversions from an internal to an external format (function module CONVERSION_EXIT_ALPHA_OUTPUT) the process is reversed. Blank characters on the left-hand side are omitted from the output.
CONVERSION_EXIT_ALPHA_OUTPUT ths functional module will be transorted automatically with out your notice
hope this helps
santosh
Edited by: Santhosh Nagaraj on Sep 16, 2009 2:59 PM
Edited by: Santhosh Nagaraj on Sep 16, 2009 3:00 PM

Conversion routine to remove leading zeros from nonnumeric values.

Hi,
Can anybody tell me any conversion routine while can remove leading zeros from a character value.
Eg :
input : asdfe
        output : 0000asdfe and vice versa
I tried with Alpha conversion routine but that is useful only with numeric values.
Please help.
Regards,
Deepti Jain.

Hi,
See the following program, and the same logic you can apply in Transfer Rules/Transformations. Take ABAPer help.
REPORT ZALPHA_INPUT.
DATA: ZI(18) TYPE C,
      ZO(12) TYPE C.
DATA: ZS(12) TYPE C,
      ZR(18) TYPE C.
      ZI = '000000099999889925'.
      ZS = '099999889925'.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
    EXPORTING
      INPUT         = ZI
   IMPORTING
     OUTPUT        = ZO.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
    EXPORTING
      INPUT         = ZS
   IMPORTING
     OUTPUT        = ZR .
Write:/   ZI.
Write:/   ZO.
Write:/   ZS.
Write:/   ZR.
Thanks
Reddy

How to delimit leading zero in vendor number in OO ABAP ALV without using conversion routine

Hi,
How to delimit leading zero in OO ABAP ALV without using conversion routine, because I have many fields like vendor, customer, material number etc..
How to address this leading zero.
I appreciate your quick response.
Regards,
Nalini S.

Hi Nalini,
Delimiting leading zeros in fields has to be done via conversion routines, as suggested by Vadamalai you need to pass on the conversion routine name in you field catalog variable.
Now as to which object oriented approach are you using to have your table contents display in ALV as it matters -
Using FACTORY method of CL_SALV_TABLE class, or
Using SET_TABLE_FOR_FIRST_DISPLAY method of CL_GUI_ALV_GRID class.
Using FACTORY method of CL_SALV_TABLE will do your own work, no need to apply any conversion routines or set long/medium/short text for columns as we do in field catalogs!
Cheers,
Varun

How can solve this ORA-03120: two-task conversion routine: integer overflow

Hello everybody,
I'm writing this query "SELECT rowid from <mytable>" and I get this error: ORA-03120
Does anybody know how can i solve it?
Thanks in advice

Here is the cause and action as suggested in the Oracle Error Guide...please see if it helps you to fix the error
ORA-03120:two-task conversion routine:integer overflow
Cause: An integer value in an internal Oracle structure overflowed when being sent or received over a heterogeneous connection. This can happen when an invalid buffer length or too great a row count is specified. It usually indicates a bug in user application.
Action: Check parameters to Oracle calls. If the problem recurs, reduce all integer parameters, column values not included, to less than 32767
Regards,
Murali Mohan

I suspect a spy app on my iphone 4 that somebody watching my calls/ voice conversation. Can somebody help me to identify the app and how to remove it?

I suspect a spy app on my iphone 4 that somebody watching my calls/ voice conversation. Can somebody help me to identify the app and how to remove it?

No spy app can be installed on iphone which is not jailbroken.
For example iKeyMonitor iPhone spy can not be installed without jailbroken.
http://ikeymonitor.com

Removing Alpha conversion routine

Hi All,
We have an object which was created with alpha conversion routine and master data is alredy loaded to the same.
Will there be an impact if we remove the alpha routine from the object now. Will this cause any data inconsistency?
Thanks
Jeevitha

Hi,
Check with the following programand implement it in TransferRules/Transformations.
REPORT ZALPHA_INPUT.
DATA: ZI(18) TYPE C,
      ZO(12) TYPE C.
DATA: ZS(12) TYPE C,
      ZR(18) TYPE C.
      ZI = '000000099999889925'.
      ZS = '099999889925'.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
    EXPORTING
      INPUT         = ZI
   IMPORTING
     OUTPUT        = ZO.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
    EXPORTING
      INPUT         = ZS
   IMPORTING
     OUTPUT        = ZR .
Write:/   ZI.
Write:/   ZO.
Write:/   ZS.
Write:/   ZR.
Thanks
Reddy

Conversion Routine... plz help

Dear Gurus,
There is a text field in R3 called as SGTXT related to some finance table... some of the records in this field directly start with '#' character and then the details.. Well here is the problem.. I m loading to ODS 0FIAR_O04 and it ends up in error due to the above mentioned problem.. the infoobject which carry the data from SGTXT field is 0POSTXT...
I decided to go for a conversion routive in transfer rule for this field.. but i dont know how to write routines.. can you plz help me with the steps as well as the code to remove '#' from SGTXT.... Thanks.
For more help i m attaching the conversion routine with is automatically generated by system... only i hv to add code to remove '#' character... kindly go thru it and suggest me where to add and what to add...
here it is
PROGRAM CONVERSION_ROUTINE.
Type pools used by conversion program
TYPE-POOLS: RS, RSARC, RSARR, SBIWA, RSSM.
Declaration of transfer structure (selected fields only)
TYPES: BEGIN OF TRANSFER_STRUCTURE ,
InfoObject 0POSTXT: CHAR - 000050
SGTXT(000050) TYPE C,
END OF TRANSFER_STRUCTURE .
Global code used by conversion rules
$$ begin of global - insert your declaration only below this line -
TABLES: ...
DATA: ...
$$ end of global - insert your declaration only before this line -
FORM COMPUTE_POSTXT
Compute value of InfoObject 0POSTXT
in communication structure /BIC/CS0FI_AR_4
Technical properties:
field name = POSTXT
data element = /BI0/OIPOSTXT
data type = CHAR
length = 000060
decimals = 000000
ABAP type = C
ABAP length = 000120
reference field =
Parameters:
--> RECORD_NO Record number
--> TRAN_STRUCTURE Transfer structure
<-- RESULT Return value of InfoObject
<-> G_T_ERRORLOG Error log
<-- RETURNCODE Return code (to skip one record)
<-- ABORT Abort code (to skip whole data package)
FORM COMPUTE_POSTXT
USING RECORD_NO LIKE SY-TABIX
TRAN_STRUCTURE TYPE TRANSFER_STRUCTURE
G_S_MINFO TYPE RSSM_S_MINFO
CHANGING RESULT TYPE /BI0/OIPOSTXT
G_T_ERRORLOG TYPE rssm_t_errorlog_int
RETURNCODE LIKE SY-SUBRC
ABORT LIKE SY-SUBRC. "set ABORT 0 to cancel datapackage
$$ begin of routine - insert your code only below this line -
DATA: l_s_errorlog TYPE rssm_s_errorlog_int.
RESULT = .
returncode 0 means skip this record
RETURNCODE = 0.
abort 0 means skip whole data package !!!
ABORT = 0.
$$ end of routine - insert your code only before this line -
ENDFORM.
FORM INVERT_POSTXT
Inversion of selection criteria for InfoObject 0POSTXT
This subroutine needs to be implemented only for SAP RemoteCubes
(for better performance) and for the Report/Report Interface
(drill through).
--> I_RT_CHAVL_CS Ranges table for current InfoObject
--> I_THX_SELECTION_CS Selection criteria for all other InfoObjects
<-- C_T_SELECTION Selection criteria for fields of
transfer structure
<-- E_EXACT Flag: Inversion was exact
FORM INVERT_POSTXT
USING I_RT_CHAVL_CS TYPE RSARC_RT_CHAVL
I_THX_SELECTION_CS TYPE RSARC_THX_SELCS
CHANGING C_T_SELECTION TYPE SBIWA_T_SELECT
E_EXACT TYPE RS_BOOL.
$$ begin of inverse routine - insert your code only below this line-
DATA:
L_S_SELECTION LIKE LINE OF C_T_SELECTION.
An empty selection means all values
CLEAR C_T_SELECTION.
L_S_SELECTION-FIELDNM = 'SGTXT'.
Selection of all values may be not exact
E_EXACT = RS_C_FALSE.
$$ end of inverse routine - insert your code only before this line -
ENDFORM.

It has been solved.. thanks everyone for inputs.. points awarded to concerened.. thanks.

How to remove conversion routine "ABPSN"

Similar Messages

Maybe you are looking for