How to remove empty row from rfc table output.

Hello,
I am using adaptive rfc and printing table output. The table rows start from 2nd row, the first row being empty. How can I remove the empty first row.
Here is what I tried.
wdContext.nodeDataSource().nodeTableOutput().moveNext();
and
wdContext.nodeDataSource().nodeTableOutput().moveTo(1);
Neither of them worked. Any clue is appreciated.
Srinivas

IWDNodeElement first = wdContext.nodeDataSource().nodeTableOutput().getElementAt(0);
wdContext.nodeDataSource().nodeTableOutput().removeElement(first);
Armin

Similar Messages

How to remove the bookmark from the table of contents?

Hi everyone, I have a question:
How to remove the bookmark from the table of contents in Captivate 6?
Regards...

Doug, your frustration is making you "bug" gun trigger happy. LOL
LOL, I suppose I have.
I believe the answer you are looking for is in the publishing preferences: under LMS advanced settings, look for the option: never send resume data.
[can someone please confirm this - I am not at a desktop now]
Anyhow, selecting this option will stop resume data - so the lesson will treat even returning learners as new. Hopefully, this will work for you.
This works! Thank you again!
*but* Why isn't Captivate asking the learner to make the choice of whether to start over or resume. It does this correctly if the lesson is published stand-alone.
Thanks again!

How to compare two rows from two table with different data

how to compare two rows from two table with different data
e.g.
Table 1
ID   DESC
1     aaa
2     bbb
3     ccc
Table 2
ID   DESC
1     aaa
2     xxx
3     ccc
Result
2

Create
table tab1(ID
int ,DE char(10))
Create
table tab2(ID
int ,DE char(10))
Insert
into tab1 Values
(1,'aaa')
Insert
into tab1 Values
(2,'bbb')
Insert
into tab1 Values(3,'ccc')
Insert
into tab1 Values(4,'dfe')
Insert
into tab2 Values
(1,'aaa')
Insert
into tab2 Values
(2,'xx')
Insert
into tab2 Values(3,'ccc')
Insert
into tab2 Values(6,'wdr')
SELECT
tab1.ID,tab2.ID
As T2 from tab1
FULL
join tab2 on tab1.ID
= tab2.ID
WHERE
BINARY_CHECKSUM(tab1.ID,tab1.DE)
<> BINARY_CHECKSUM(tab2.ID,tab2.DE)
OR tab1.ID
IS NULL
OR
tab2.ID IS
NULL
ID column considered as a primary Key
Apart from different record,Above query populate missing record in both tables.
Result Set
ID ID
2 2
4 NULL
NULL 6
ganeshk

How to remove a row from a rowset obtained via a CachedRowSetDataProvider

I have a table filled from a database that it is bound to.
I have the CachedRowSetDataProvider that supplies the rows.
I want to remove a row from the result set and can't figure out how.
There is a method ... removeRow(RowKey row).
and there is a method ... getRowKey(java.lang.String rowId)
How do I determine what the string id is for, say, row 3?
thanks
jim murray

Thats the tutorial I am working with.
My problem is that the statement tripDataProvider.refresh();
executed when the person drop down changes doesn't seem to clearing the previous persons results.
So I want to clear the rowset myself by deleting the rows individually.
I can find a method to delete a row if I supply the RowKey.
There is a method to get the rowkey if I know the RowID, which is a string.
Unfortunately I dont know the string to use for an arbitrary row.
There should be a simpler way to clear the data from a rowset.
regards
jim murray

First attempt to remove duplicate rows from a table...

I have seen many people asking for a way to remove duplicate rows from data. I made up a fairly simple script. It adds a column to the table with the cell selected in it, and adds the concatenation of the data to the left into that new column. then it reads that into a list, and walks through that list to find any that are listed twice. Any that are it marks for DELETE.
It then walks through to find each one marked for delete and removes them (you must go from bottom to top to do this, otherwise your row markings for delete don't match up to the original rows anymore). Last is to delete the column we added.
tell application "Numbers"
activate
tell document 1
-- DETERMINE THE CURRENT SHEET
set currentsheetindex to 0
repeat with i from 1 to the count of sheets
tell sheet i
set x to the count of (tables whose selection range is not missing value)
end tell
if x is not 0 then
set the currentsheetindex to i
exit repeat
end if
end repeat
if the currentsheetindex is 0 then error "No sheet has a selected table."
-- GET THE TABLE WITH CELLS
tell sheet currentsheetindex
set the current_table to the first table whose selection range is not missing value
end tell
end tell
log current_table
tell current_table
set list1 to {}
add column after column (count of columns)
set z to (count of columns)
repeat with j from 1 to (count of rows)
set m to ""
repeat with i from 1 to (z - 1)
set m to m & value of (cell i of row j)
end repeat
set value of cell z of row j to m
end repeat
set MyRange to value of every cell of column z
repeat with i from 1 to (count of items of MyRange)
set n to item i of MyRange
if n is in list1 then
set end of list1 to "Delete"
else
set end of list1 to n
end if
end repeat
repeat with i from (count of items of list1) to 1 by -1
set n to item i of list1
if n = "Delete" then remove row i
end repeat
remove column z
end tell
end tell
Let me know how it works for y'all, it worked good on my machine, but I know localization is causing errors sometimes when I post things.
Thanks,
Jason
Message was edited by: jaxjason

Hi jason
I hope that with the added comments it will be clear.
Ask if something is always opaque.
set {current_Range, current_table, current_Sheet, current_Doc} to my getSelection()
tell application "Numbers09"
tell document current_Doc to tell sheet current_Sheet to tell table current_table
set list1 to {}
add column after column (count of columns)
set z to (count of columns)
repeat with j from 1 to (count of rows)
set m to ""
tell row j
repeat with i from 1 to (z - 1)
set m to m & value of cell i
end repeat
set value of cell z to m
end tell
end repeat
set theRange to value of every cell of column z
repeat with i from (count of items of theRange) to 1 by -1
(* As I scan the table backwards (starting from the bottom row),
I may remove a row immediately when I discover that it is a duplicate *)
set n to item i of theRange
if n is in list1 then
remove row i
else
set end of list1 to n
end if
end repeat
remove column z
end tell
end tell
--=====
on getSelection()
local _, theRange, theTable, theSheet, theDoc, errMsg, errNum
tell application "Numbers09" to tell document 1
set theSheet to ""
repeat with i from 1 to the count of sheets
tell sheet i
set x to the count of tables
if x > 0 then
repeat with y from 1 to x
(* Open a trap to catch the selection range.
The structure of this item
«class
can't be coerced as text.
So, when the instruction (selection range of table y) as text
receive 'missing value' it behaves correctly and the lup continue.
But, when it receive THE true selection range, it generates an error
whose message is errMsg and number is errNum.
We grab them just after the on error instruction *)
try
(selection range of table y) as text
on error errMsg number errNum (*
As we reached THE selection range, we are here.
We grab the errMsg here. In French it looks like:
"Impossible de transformer «class
The handler cuts it in pieces using quots as delimiters.
item 1 (_) "Impossible de transformer «class » "
item 2 (theRange) "A2:M25"
item 3 (_) " of «class NmTb» "
item 4 (theTable) "Tableau 1"
item 5 (_) " of «class NmSh» "
item 6 (theSheet) "Feuille 1"
item 7 (_) " of document "
item 8 (theDoc) "Sans titre"
item 9 ( I drop it ) " of application "
item 10 ( I drop it ) "Numbers"
item 11 (I drop it ) " en type string."
I grab these items in the list
{_, theRange, _, theTable, _, theSheet, _, theDoc}
Yes, underscore is a valid name of variable.
I often uses it when I want to drop something.
An alternate way would be to code:
set ll to my decoupe(errMsg, quote)
set theRange to item 2 of ll
set theTable to item 4 of ll
set theSheet to item 8 of ll
set theDoc to item 10 of ll
it works exactly the same but it's not so elegant.
set {_, theRange, _, theTable, _, theSheet, _, theDoc} to my decoupe(errMsg, quote)
exit repeat (*
as we grabbed the interesting datas, we exit the lup indexed by y.*)
end try
end repeat -- y
if theSheet > "" then exit repeat (*
If we are here after grabbing the datas, theSheet is not "" so we exit the lup indexed by i *)
end if
end tell -- sheet
end repeat -- i
(* We may arrive here with two kinds of results.
if we grabbed a selection, theSheet is something like "Feuille 1"
if we didn't grabbed a selection, theSheet is the "" defined on entry
and we generate an error which is not trapped so it stops the program *)
if theSheet = "" then error "No sheet has a selected table."
end tell -- document
(* Now, we send to the caller the interesting datas :
theRange "A2:M25"
theTable "Tableau 1"
theSheet "Feuille 1"
theDoc "Sans titre" *)
return {theRange, theTable, theSheet, theDoc}
end getSelection
--=====
on decoupe(t, d)
local l
set AppleScript's text item delimiters to d (*
Cut the text t in pieces using d as delimiter *)
set l to text items of t
set AppleScript's text item delimiters to "" (*
Resets the delimiters to the standard value. *)
(* Send the list to the caller *)
return l
end decoupe
--=====
Have fun
And if it's not clear enough, you may ask for more explanations.
Yvan KOENIG (from FRANCE mardi 27 janvier 2009 21:49:19)

Need to remove duplicate rows from a table

Hi Gurus ,
I am using oracle 11.2.0.3 .
SQL> desc osstage.S_EVT_ACT_X;
Name                                      Null?    Type
ROW_ID                                    NOT NULL VARCHAR2(15 CHAR)
LAST_UPD                                  NOT NULL DATE
PAR_ROW_ID                                NOT NULL VARCHAR2(15 CHAR)
ATTRIB_17                                          NUMBER(22,7)
ATTRIB_26                                          DATE
ATTRIB_02                                          VARCHAR2(100 CHAR)
PROCESS_TIMESTAMP                                  TIMESTAMP(6);
now when i give the below command it gives the error as someone has disabled the constraint accidently .
alter table s_evt_act_x enable constraint S_EVT_ACT_X_P1;
Error starting at line 3 in command:
alter table s_evt_act_x enable constraint S_EVT_ACT_X_P1
Error report:
SQL Error: ORA-02437: cannot validate (OSSTAGE.S_EVT_ACT_X_P1) - primary key violated
02437. 00000 - "cannot validate (%s.%s) - primary key violated"
*Cause:    attempted to validate a primary key with duplicate values or null
           values.
*Action:   remove the duplicates and null values before enabling a primary
           key.
Can you please guide me with this issue .

Please refer
Script: Deleting Duplicate Rows from a Table (Doc ID 31413.1)
How to Find or Delete Duplicate Rows in a Table (Doc ID 1004425.6)

How to delete multiple rows from ADF table

How to delete multiple rows from ADF table

Hi,
best practices when deleting multiple rows is to do this on the business service, not the view layer for performance reasons. When you selected the rows to delete and press submit, then in a managed bean you access thetable instance (put a reference to a managed bean from the table "binding" property") and call getSeletedRowKeys. In JDeveloper 11g, ADF Faces returns the RowKeySet as a Set of List, where each list conatins the server side row key (e.g. oracle.jbo.Key) if you use ADF BC. Then you create a List (ArrayList) with this keys in it and call a method exposed on the business service (through a method activity in ADF) and pass the list as an argument. On the server side you then access the View Object that holds the data and find the row to delte by the keys in the list
Example 134 here: http://blogs.oracle.com/smuenchadf/examples/#134 provides you with the code
Frank

How to remove a row from a jtable with DefaultTableModel

Hi to all,]
I want to remove a row from jtable. I am using DefaultTableModel.
I have got some example but every example is given with AbstractTableModel
Please help me...
Thanks and Regards

I want to remove a row from jtable. I am using DefaultTableModel.How do you program without reading the API.
The name of the method you use is "removeRow". How hard is that to find by reading the API?
Not only do you not bother to read the API, you don't even bother to read and respond to your old postings when you get help:
http://forum.java.sun.com/thread.jspa?threadID=5137773
http://forum.java.sun.com/thread.jspa?threadID=5134667
http://forum.java.sun.com/thread.jspa?threadID=5131162
Your on your own in the future.

How to remove a row from JTable

Hi!
I'm used to remove rows from JTables getting the model and doing a removeRow(num) like this:
((DefaultTableModel)jTable1.getModel()).removeRow(0);
But with ADF and JDeveloper the model says it's a JUTableBinding.JUTableModel but its not accessible.
How to remove a row in Jdeveloper 10.1.3.4.0?

Or maybe is just better to refresh data in the jTable but I do not know either like doing it.

Remove a row from multiple tables

Hello,
I have a form that has what appears to be one table. Since I needed 30 columns (29 of them are single character fields) I had to use 2 table objects. Then I needed the ability to add and remove rows. Adding a row at the end is easy enough. Deleting a specific row is the problem. At the moment, I added a third table which has a header row and a item body row. the body row is a button with the intention of removing that entire row from the large table. This means it needs to remove the row from all 3 tables.
My structure is:
form1
(Some other flowed subform that doesn't matter for us)
SubformPersonnel (a flowed subform)
SubformHeader (a positioned subform)
TextOverallHeader (text to label the oeverall 3 tables)
ButtonAddRow (adds a row to the end of all 3 tables)
SubformPersonnelTable (a positioned subform)
ContractorTableRemove (a table with 1 column for the Remove button)
HeaderRow (A hidden row to align the table with the other 2)
Item (A row with the Remove button)CellRemoveButton (the cell with the remove button and associated JavaScript)
ContractorTableLeft (a table with the left 15 printed columns)
HeaderRow
Contractor (A row of data to be removed when CellButton above is clicked)
ContractorTableRight (a table with the right 15 printed columns)
HeaderRow
Contractor (A row of data to be removed when CellButton above is clicked)
(Some other flowed subforms that I am not worried about at the moment)
The 3 tables are aligned so the headers all line up, with no spaces between them. The body rows then line up and this looks like one large table. From left to right, they are:
ContractorTableRemove, ContractorTableLeft, ContractorTableRight
So Item and Contractor rows are added when ButtonAddRow is clicked in the overall header. The intial count is set to 8 for each table, so I get 8 rows at startup. The minimum count is set to 1 for each. I know that each row of each table has the same index number because I filled those into a cell in each table durig the cell's initialize. This line, in the CellRemoveButton's click event deletes that cell's row in that table:
this.parent.parent._Item.removeInstance(this.parent.index);
I have tried all sorts of ways to delete the same row (using same index #) in the other 2 tables: ContractorTableLeft and ContractorTableRight, but don't seem to be getting the correct syntax correct. I have tried hard coding the references, using .parent as shown below, and also tried using an index of 1 just to try deleting a row with no results.
     this.parent.parent.parent.ContractorTableLeft._Contractor.removeInstance(this.parent.inde x);
Can someone get me the correct syntax here?
I have seen examples of putting a hidden delete button on each table and clicking that, but I am concerned that it will get in the way of the tables on either side of the table it is in. I reeally want to just reference the row and remove it so I can avoid any problems these additional delete problems may cause.
I have copied the form to https://acrobat.com/#d=7M8R50rEHf4AaVXppwyKLw

Thank you, Niall. Much appreciated!
The Delete button was more to make sure one could delete these outside a button in the actual row and I see I had the index wrong such that I was deleting the second row and not the first. I had toyed with using this as a hidden button if I could pass the index to the event's function.
I had not thought of adding the reference to each row as a variable. It seems to work very well.
For future reference to others, here is the code from the cellRemoveButton click event:
     // Declare some variables
     var i = this.parent.index;
     var oContractorLeft = ContractorTableLeft.Contractor;
     var oContractorRight = ContractorTableRight.Contractor;
     // Remove this row by accessing its index within the set of 'Item' row instances of the parent table
     _Item.removeInstance(i);
      // Since this table is actually 3 tables, we need to remove the other two table's instances as well.
     // Their index should be the same, so we just need to get their names correct.
     oContractorLeft.instanceManager.removeInstance(i);
     oContractorRight.instanceManager.removeInstance(i);
      // removing the row doesn't trigger calculations in tables in the form's current target (fixed in later versions of Acrobat)
     // force calculations to fire so the ItemIndex field's value is updated according to the remaining row's indexes
     // see http://forms.stefcameron.com/2006/05/20/add-recalculate/
     xfa.form.recalculate(1);
Again, thank you!
Karl

How to remove a row from a rowset

HI,
I am trying to do a very simple thing, but I got stuck.
The problem:
I want to remove a row from a rowset, without removing the row itself. Especially I do not want to remove any entities.
I need this functionality in several situations, for example when I want to move a row from one rowset to another.
Another situation is when I have a viewlink not based on an association. When a row is modified so it does not fit to the viewlink's where clause anymore, I need a way to remove it manually (without removig any associated entities),
I hope someon can help me on this,
thanks,
Frank

Sascha:
The only workaround I can think of is a true hack, and you'd be entering into a unchartered territory. But, it may be worth a try.
First, you need to create a subclass of oracle.jbo.server.ViewObjectImpl in the oracle.jbo.server package. This is because you need to override one of the package private methods. Suppose you define oracle.jbo.server.TempBaseViewObjectImpl which extends ViewObjectImpl.
Override the following method:
int[] getDeleteParticipants()
This method returns an array of EO bases for which ViewRow's delete should cause deletion of EntityRow's.
So, before you remove a ViewRow, you should set some flag in your TempBaseViewObjectImpl, so that getDeleteParticipants() would return "new int[0];" This will cause no EntityRow's to be deleted. Only the ViewRow will be removed from the collection.
Note that you should reset this flag after the operation, so that you can delete the EntityRow's (when necessary).
Your real VO should then subclass TempBaseViewObjectImpl.
Once we fix this problem and provide a real API, you should remove TempBaseViewObjectImpl and extend your real VO from ViewObjectImpl instead of TempBaseViewObjectImpl.
Thanks.
Sung

How to remove multiple rows from table

Hi All,
in my application iam using two tables,
this is my code
int selection = wdContext.nodeA().getLeadSelection();
String num = wdContext.nodeA.geAAt(selection).getV_Num();
     for(int b=0;b<wdContext.nodeVn_Context().size();b++)
                                                  if(wdContext.nodeVn_Context().getVn_ContextElementAt(b).getVa_num().equalsIgnoreCase
                                                  (num))
                                                       wdContext.nodeVn_Context().removeElement(wdContext.nodeVn_Context().getVn_ContextElementAt(b));
here Vn_Context is having 4 rows, i mean size of Vn_Context is 4. when i use this code to remove that 4 rows based on the condition, which i gave in if, its able to remove only one row, so how to remove those four rows, is this code correct or not, please help me.

Hi sushma,
if you have 4 row then why should you give the condition for removing rrow..because when you gave condition the depends on your lead selection of getVa_num().so you will return perticullar row of getVa_num(). value of lad selection ..this would not match of other row value(getVa_num().so it will remove only that value of lead selection of getVa_num().
better you remove taht condition.
int selection = wdContext.nodeA().getLeadSelection();
String num = wdContext.nodeA.geAAt(selection).getV_Num();
for(int b=0;b<wdContext.nodeVn_Context().size();b++)
//if(wdContext.nodeVn_Context().getVn_ContextElementAt(b).getVa_num().equalsIgnoreCase
//(num))
wdContext.nodeVn_Context().removeElement(wdContext.nodeVn_Context().getVn_ContextElementAt(b));
no need to give the condition right now..
if you want to remove multiselection row,i mean selected row for multiple then you select the row as per your rows delete.
for(int b=0;b<wdContext.nodeVn_Context().size();b++)
if(lead==b || wdcontext.nodeVn_Context().isMultiselection(b){
wdContext.nodeVn_Context().removeElement(wdContext.nodeVn_Context().getVn_ContextElementAt(b));
this way you do solve your problem..
thanks
jjati

How to remove empty tags from XML

Hello,
I have a XML file which contains some empty tags and some values with "?". I need to remove all empty tags and tags which have a value "?".
Sample Data:
<a>
<b></b>
<c> Hello </c>
<d>world ?</d>
<e>oracle</e>
</a>
Expected result:
<a>
<c> Hello </c>
<e>oracle</e>
</a>
Thank you for your time.
Thanks,
Edited by: 850749 on Apr 7, 2011 6:25 PM

Dear Odie,
May I make your example a bit more complicated by adding an additional complexType, please:
---Original ----
<DEPT>
<EMPID>1</EMPID>
<EMPNAME>Martin Chadderton</EMPNAME>
<SALARY>??</SALARY>
<SALARYq></SALARYq>
</DEPT>
----- New ----
<DEPT>
<EMPID>1</EMPID>
<EMPNAME>Martin Chadderton</EMPNAME>
<SALARY>??</SALARY>
<SALARYq></SALARYq>
<EMPLMNT_HISTORY>
<DEVISION>1</DEVISION>
<FROM_DATE>2011-01-01 </FROM_DATE>
<TO_DATE></TO_DATE>
</EMPLMNT_HISTORY>
</DEPT>
Your solution works perfectly for <SALARY>, but how would you suggest also to deal with <TO_DATE> ?
Massive thanks for your help!
N.B. Just to emphasise, in my case I have 3 levels (complexType > complexType > complexType) and many elements and I would like to know if there is any generic option to say
to remove all the empty elements from the result, as it causes to the SSJ (Systinet) Webservice to crash.

How to remove empty lines from xml files after removing nodes from document

<pre>
Hi
<b>i have xml document, which is shown below
after removing some nodes from the document ,i am getting empty lines in place of removed nodes,how to resolve this and get the proper xml document without any errors</b>
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<!DOCTYPE Message SYSTEM "TRD01.dtd">
<Message>
<Header>
<CounterPartyType>CLIENT</CounterPartyType>
<CreationTime>20134455</CreationTime>
<ErrorCode>363 </ErrorCode>
<ErrorEnterPriseId>N</ErrorEnterPriseId>
<ErrorStatus>1</ErrorStatus>
<ErrorSystemId>STL</ErrorSystemId>
<ErrorTimes>31</ErrorTimes>
<MessageType>T</MessageType>
<RecipientEnterpriseId>N</RecipientEnterpriseId>
<RecipentSystemId>EXM</RecipentSystemId>
<Remarks>REMARSK</Remarks>
<SenderEnterpriseId>N</SenderEnterpriseId>
<SenderSystemId>TR</SenderSystemId>
</Header>
</Message>
<ErrorCode>363 </ErrorCode>
<ErrorEnterPriseId>NIHK</ErrorEnterPriseId>
<ErrorStatus>1</ErrorStatus>
<ErrorSystemId>STL</ErrorSystemId>
<ErrorTimes>31</ErrorTimes>
XPathExpression expression5 = xpath.compile(xmlpath5);
Object result5 = expression5.evaluate(doc, XPathConstants.NODE);
Node node5 = (Node) result5;
node5.getParentNode().removeChild(node5);
XPathExpression expression6 = xpath.compile(xmlpath6);
Object result6 = expression6.evaluate(doc, XPathConstants.NODE);
Node node6=(Node) result6;
node6.getParentNode().removeChild(node6);
XPathExpression expression7 = xpath.compile(xmlpath7);
Object result7 = expression7.evaluate(doc, XPathConstants.NODE);
Node node7=(Node) result7;
node7.getParentNode().removeChild(node7);
doc.normalize();
doc.normalizeDocument();
TransformerFactory tf = TransformerFactory.newInstance();
Transformer t = tf.newTransformer();
t.setOutputProperty(OutputKeys.INDENT, "yes");
t.setOutputProperty("{http://xml.apache.org/xslt}indent-amount", "4");
t.setOutputProperty(OutputKeys.METHOD,"xml");
t.setOutputProperty(OutputKeys.ENCODING, "UTF-8");
the xml output i am getting is
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<Message>
<Header>
<CounterPartyType>CLIENT</CounterPartyType>
<CreationTime>20134455</CreationTime>
<MessageType>TRD01</MessageType>
<RecipientEnterpriseId>N</RecipientEnterpriseId>
<RecipentSystemId>STL</RecipentSystemId>
<Remarks>REMARSK</Remarks>
<SenderEnterpriseId>N</SenderEnterpriseId>
<SenderSystemId>T</SenderSystemId>
</Header>
</Message>
<b>could you please let me know how to avoid empty lines in the xml doucment output</b>
this is the method i am using to get the result
public void ValidateRecord(String xml){
try{
DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
DocumentBuilder db = factory.newDocumentBuilder();
//parse file into DOM
/*DOMParser parser = new DOMParser();
parser.setErrorStream(System.err);
parser.setValidationMode(DTD_validation);
parser.showWarnings(true);*/
System.out.println ("HI THIS xml is validation "+xml);
Resolver res = new Resolver();
db.setEntityResolver(res);
Document doc = db.parse(new InputSource(new StringReader(xml)));
XPathFactory xpf = XPathFactory.newInstance();
XPath xpath = xpf.newXPath();
// XPathExpression expression = xpath.compile("//A/B[C/E/text()=13]");
String xmlpath="/Message/Header/CounterPartyType/text()";
String xmlpath1="/Message/Header/RecipentSystemId/text()";
String xmlpath2="/Message/Header/ErrorSystemId/text()";
XPathExpression expression = xpath.compile(xmlpath);
XPathExpression expression1 = xpath.compile(xmlpath2);
Object result = expression.evaluate(doc, XPathConstants.NODE);
Object result1 = expression1.evaluate(doc, XPathConstants.NODE);
Node node = (Node) result;
Node node1 = (Node) result1;
System.out.println("the values of the string is " +node.getNodeValue());
System.out.println("the values of the string is " +node1.getNodeValue());
// for (int i = 0; i < nodes.getLength(); i++) {
//System.out.println(nodes.item(i).getNodeValue());
// CAHNGING THE RECEIPENT NODE
XPathExpression expression2 = xpath.compile(xmlpath1);
Object result2 = expression2.evaluate(doc, XPathConstants.NODE);
Node node2 = (Node) result2;
System.out.println(node2);
node2.setNodeValue(node1.getNodeValue());
System.out.println(node2);
//removing the nodes from document
String xmlpath3="/Message/Header/ErrorCode";
String xmlpath4="/Message/Header/ErrorEnterPriseId";
String xmlpath5="/Message/Header/ErrorStatus";
String xmlpath6="/Message/Header/ErrorSystemId";
String xmlpath7="/Message/Header/ErrorTimes";
XPathExpression expression3 = xpath.compile(xmlpath3);
Object result3 = expression3.evaluate(doc, XPathConstants.NODE);
Node node3 = (Node) result3;
node3.getParentNode().removeChild(node3);
XPathExpression expression4 = xpath.compile(xmlpath4);
Object result4 = expression4.evaluate(doc, XPathConstants.NODE);
Node node4 = (Node) result4;
System.out.println("node value");
System.out.println(node4.getParentNode().getNodeName());
node4.getParentNode().removeChild(node4);
XPathExpression expression5 = xpath.compile(xmlpath5);
Object result5 = expression5.evaluate(doc, XPathConstants.NODE);
Node node5 = (Node) result5;
node5.getParentNode().removeChild(node5);
XPathExpression expression6 = xpath.compile(xmlpath6);
Object result6 = expression6.evaluate(doc, XPathConstants.NODE);
Node node6=(Node) result6;
node6.getParentNode().removeChild(node6);
XPathExpression expression7 = xpath.compile(xmlpath7);
Object result7 = expression7.evaluate(doc, XPathConstants.NODE);
Node node7=(Node) result7;
node7.getParentNode().removeChild(node7);
// Node b13Node = (Node) expression.evaluate(doc, XPathConstants.NODE);
//b13Node.getParentNode().removeChild(b13Node);
doc.normalize();
doc.normalizeDocument();
TransformerFactory tf = TransformerFactory.newInstance();
Transformer t = tf.newTransformer();
t.setOutputProperty(OutputKeys.INDENT, "yes");
t.setOutputProperty("{http://xml.apache.org/xslt}indent-amount", "4");
t.setOutputProperty(OutputKeys.METHOD,"xml");
t.setOutputProperty(OutputKeys.ENCODING, "UTF-8");
t.transform(new DOMSource(doc), new StreamResult(System.out));
catch (Exception e) {
e.printStackTrace();
System.out.println(e.getMessage());
</pre>
Edited by: user12185243 on Apr 6, 2013 6:38 AM
Edited by: user12185243 on Apr 6, 2013 6:41 AM
Edited by: user12185243 on Apr 6, 2013 6:43 AM
Edited by: user12185243 on Apr 6, 2013 6:45 AM
Edited by: user12185243 on Apr 6, 2013 9:00 AM

either this way we can do this
1)
DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
<b> factory.setIgnoringElementContentWhitespace(true); </b>
DocumentBuilder db = factory.newDocumentBuilder();
or
2)
java.io.StringWriter sw = new java.io.StringWriter();
StreamResult sr = new StreamResult(sw);
t.transform(new DOMSource(doc), sr);
String xml1 = sw.toString().trim();
<b> xml1=xml1.replaceAll("\\s",""); </b>
System.out.println(xml1.trim());

How To Remove Empty Node From Source XML

Hi,
How can I remove an empty node from the source xml in a XSLT mapping.
For e.g. If the source xml is like:
<SRC>
<Node1>SAP</Node2>
<Node2/>
<Node3>XI</Node3>
</SRC>
Then the xml should become:
<SRC>
<Node1>SAP</Node2>
<Node3>XI</Node3>
</SRC>
I need to do this because the output of my XSLT mapping is showing blank spaces for each blank node.
Thanks,
Abhishek.

Use <xsl:if>
Or else you may find different options here
http://www.dpawson.co.uk/xsl/sect2/N3328.html#d4804e304
Regards,
Prateek

How to remove empty row from rfc table output.

Similar Messages

Maybe you are looking for