HOW TO REMOVE ERROR 42110
HOW CAN I REMOVE THE MASSAGE ERROR 432110 THAT COMES UP EVERY TIME I DOWNLOAD ITUNES OR IT COMES UP EVERY TIME I OPEN MY ITUNES?
For the 42110 error try this user tip:
https://discussions.apple.com/docs/DOC-4831
Hope that helps.
Regards.
Forum Tip: It is generally considered inappropriate to type all in uppercase letters in Internet discussions, as text that is typed all in uppercase is by convention considered to be shouting. Uppercase is also more difficult to read, so please use all uppercase sparingly and only when you really mean to shout, which we hope you won’t need to do here .
Similar Messages
-
Hi,I am trying to run Send Email Using Smtp Client .VI in Labview 2013 examples ,but it gives error 59.Please can anyone suggest how to remove the error.The printscreen is attached below.
Solved!
Go to Solution.
Attachments:
error.docx 310 KBThanks for the help,but i have set the parameters right but still it does not work for me.Please suggest me reasons and how to correct them.
Attachments:
error.docx 270 KB -
How to remove errors after running sapf190
Hi everyone
Can anyone please guide me what procedure do i have to follow if i found differences in one of the gls after running the report sapf190. The report shows me difference in one of the Gls with debit index, debit master not matching credit index and credit total master not matching. But the programme dont tells me how to remove this error. Your kind help will be really appreciated.
RegardsRESOLVED
-
How to remove error from propagation and verify replication is ok?
Have a one-way schema level streams setup and the target DB is 3-node RAC (named PDAMLPR1). I run a large insert at source DB (35million rows). After committing on source, I made a failure test on the target DB by shutting down the entire database. The streams seems stopped as the heartbeat table sequence (it inserts a row each min) on target is still reflecting last night. We get the error in the dba_propagation:
ORA-02068: following severe error from PDAMLPR1
ORA-01033: ORACLE initialization or shutdown in progress
ORA-06512: at "SYS.DBMS_AQADM_SYS", line 1087
ORA-06512: at "SYS.DBMS_AQADM_SYS", line 7639
ORA-06512: at "SYS.DBMS_AQADM", line 631
ORA-06512: at line 1
08-FEB-10
while capture, propagation, and apply are all in enabled status. I restarted capture and propagation at source DB. But still see the error message above. My questions are:
1. How to delete the error from dba_propagation?
2. How to verify the streams is still running fine?
In normal test, during such large insert, the heartbeat table added a row in an hour. Very slow.
thanks for advice.Well, if I can give you my point of view: I think that 35 millions LCR is totally unreasonnable. Did you really post a huge insert of 35 millions then committed that single utterly huge transaction? Don't be surprised it's going to work very very hard for a while!
With a default setup, Oracle recommends to commit every 1000 LCR (row change).
There are ways to tune Streams for large transaction but I have not done so personnaly. Look on Metalink, you will find information about that (mostly documents id 335516.1, 365648.1 and 730036.1).
One more thing: you mentionned about a failure test. Your target database is RAC. Did you read about queue ownership? queue_to_queue propagation? You might have an issue related to that.
How did you setup your environment? Did you give enough streams_pool_size? You can watch V$STREAMS_POOL_ADVICE to check what Oracle think is good for your workload.
If you want to skip the transaction, you can remove the table rule or use the IGNORETRANSACTION apply parameter.
Hope it helps
Regards, -
How to remove error message power pc applications no longer supported
How do you install photoshop 7.0 disk drive on a mac os x with the error message, "Power PC applications are no longer supported"?
Which version of mac os x are you trying to install photoshop 7 on?
If you really do mean photoshop 7 (cira 2002), then it won't work on any newer intel macs.
Photoshop 7 needs an PowerPC processor and your mac probably uses an intel processor. -
Error -42110 after starting up iTunes
after starting up iTunes an error message appears with the code -42110. Any idea? Frits
How do you fix iTunes store error -42110
Fix Error 42110 iTunes | backspacetab
How To Fix "Error 42110" - 42110.wiki-errors.com -
Hi,
How to remove error during import using impdp.
ORA-39082: Object type PACKAGE_BODY:"JISPBILCORBILLINGTST502"."COR_BILL" created with compilation warnings
ORA-39082: Object type VIEW:"JISPBILCORBILLINGTST502"."VWACTUALUNBILLEDUSAGE_CDR" created with compilation warnings
Thanks in advanceORA-39082: Object type string created with compilation warnings
Cause: The object in the SQL statement following this error was created with compilation errors. If this error occurred for a view, it is possible that the base table of the view was missing.
Action: This is a warning. The object may have to be recompiled before being used. -
How to clear ERROR Notifications in SYSADMIN User
Hi,
version is : 11.5.10.2
and DB is 9.2.0.7 runing on HP-UX Itanium
We have lot of (45000) error notifications lying in SYSADMIN user.
Can anybody suggest the best procedure to clear them out ? I dont want to delete one by one. I want to clear them at single shot. Please adviseHi;
Please see below notes:
SYSADMIN User Gets Thousands of WFERROR Notifications [ID 1299167.1]
How To Remove Error Notifications From The Worklist [ID 357904.1]
Also see:
workflow purge
How to purge old workflow alerts
Regard
Helios -
i have the error (-42110) when i lunch the itunes how can i remove this error .. thanks
Try the following user tip:
iTunes for Windows 11.0.2.25 and 11.0.2.26: "Unknown error -42110" messages when launching iTunes -
I have bought a New Computer as my Old one did it's HDD. I now have windows 8/64 bit I/E 10 and am trying to Authorise my New Computer. I have downloaded the latest version and I got an ""unknown error -42110 "" .I went to te apple website and that says how to deactivate a SC folder or something in windows 7 or windows vista.
It also says to go to ""store|"" > Authorise Computer"" and I can't get anything,so I contacted Apple support and I got some person called Gulab who sent me links to the same obsolete apple website which says exactly what I have said above.
I open iTunes and it lets me login with my apple id and says that I have $78.00 in credit and to be honest I can't understand the updated version/s let alone find how to ""Authorise "" my new computer.Gulab said to delete te sc Folder but the website (Apple) says this ios for windows 7 and windows vista.
Running around in circles. Apple website needs to be drastically updated instead of updating iTunes .
Completely confused and so is the support staff....lololooolololol(1) There's a couple of ways to get through to the authorisation controls in the 11.0.x versions.
The control is still in the Store menu, but first (if you're using iTunes versions 11.0.x) you might need to bring up the menu bar to see the Store menu.
If you're using 11.0.x, click on the wee boxy icon up in the top-left corner of your iTunes to see the "Show Menu Bar" control, as per the following screenshot:
Then you'll find the control in the Store menu:
Alternatively, if you don't want to bring up the menu bar, it's still possible to get into the authorise controls via nested menus accessible from the wee boxy icon. Here's a screenshot of where to find them:
(2) Some discussion on means of locating the SC Info folder on Windows 8 systems in the following topic:
TS1389 Re: How can you do this in windows 8? -
How to remove this error every time in extraction
Dear folks,,
I have a difficulties in extraction .. Could you share to me how to remove this error please .. ??
In one ODS: Quotation (Fetching the data from CRM), it always raise up the error every time do an extraction ..
The message error is like this:
Runtime Errors : MESSAGE_TYPE_X
Error analysis
Short text of error message:
Req. 0000508314 in DataStore ZCRMQUTO must have QM status green before it is activated
Another Clues:
SY-TITLE : CPIC and RFC Control
SY-MSGTY : X
SY-MSGID : RSM1
SY-MSGNO : 110
SY-MSGV1 : 0000508314
SY-MSGV2 : ZCRMQUTO
SY-MODNO : 0
SY-DATUM : 20080116
SY-UZEIT : 083744
SY-XPROG : SAPLRSSM
SY-XFORM : RSSM_MON_START_2ND_PROCESS
My Questions are :
1. Do you ever have the problem like this ??
2. Do you know the problem regarding CPIC & RFC Control, is that any correlation with RFC/Connection to CRM.
3. Do you know regarding the message error: RSSM_MON_START_2ND_PROCESS
Need really your guidance and response..
Regards,
Niel..
will appreciate any response ..Hi,
Just try this.
As per the error message "Req. 0000508314 in DataStore ZCRMQUTO must have QM status green before it is activated" there is a request(0000508314) in red/yellow status in the ODS (ZCRMQUTO).
This error normally occurs while activation of ODS/DSO.
Activation may fail saying that there is a request with status other than green in target. Ideally system expects to activate a green request. But if it find a request with other (red/yellow) it may throw an error.
This is the error message we get for that kind of errors
'Request REQU_* in ODS must have QM status green before it is activated." and this is the same one you are getting.
Try to find the bad request, rectify/delete it.
This may resolve your problem.
thanks,
JituK -
How to remove the installed JDeveloper Update causing error
Hello there,
I install some webcenter available updates this morning...after restarting the JDeveloper11gR1 I am experiening error.
Can someone tell me how to remove the newly installed update so that I do not experience this errors again?As the last resort you can rename the systemxx.x.x.x.x. folder and restart jdev again. When you are asked if you like to migrate, answer no as the error is likely to be migrated too.
If this does not help you can uninstall jdev, remove the whole installation folder and reinstall jdev.
Timo -
Error -42110 at startup? Any idea how to solve this?
When starting up iTunes I get an error message popping up: unknown error (-42110). Any help much appreciated.
Hi Zach,
Error -42110 during startup usually occurs if there is an issue when iTunes checks for authorization information.
Install the latest iTunes from apple.com/itunes/download/
Remove the SC Info folder.
If that does not resolve the issue, see iTunes: "Error 42408" or "Error 42404" after upgrading to iTunes 9.0.3.
For more information, see the following article:
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Thanks,
Matt M. -
How do I fix error (-42110) for itunes?
How do I fix error (-42110) for itunes?
Try this user tip:
https://discussions.apple.com/docs/DOC-4831
Hope that helps. If not, you may find other suggestions if you look to the right under "More Like This" or search the forums for "42110"
Regards.
Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Communities page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums and in the Apple Knowledge Base, before you post a question. -
How to remove errorMsg given by jdeveloper & add the new custom error msg
Hi
I dropped a table in panel collection layout.on the table i have unique constraint on combination of all the columns to avoid the insertion of duplicate row.when i try to insert duplicate row ,it is giving the following two errors in a popup window automatically by jdeveloper at runtime.
Messages for this page are listed below.
Error
Constraint "DB_UNIQUE" violated during post operation:"Insert" using SQL Statement "BEGIN INSERT INTO DASHBOARD_SECURITY_TAB(LOGIN_USER_ID,GROUP_NAME) VALUES (:1,:2) RETURNING ROWID INTO :3; END;".
Error
ORA-00001: unique constraint (SCOTT.DB_UNIQUE) violated ORA-06512: at line 1
for the above error message i added the message "Duplicate rows not allowed" using Managed Bean method.
the code for this is
public String commandButton_action2() {
BindingContainer bindings = getBindings();
OperationBinding operationBinding = bindings.getOperationBinding("Commit");
Object result = operationBinding.execute();
if (operationBinding.getErrors().isEmpty()) {
FacesContext ctx = FacesContext.getCurrentInstance();
FacesMessage saveMsg = new FacesMessage("Record Saved Successfully");
ctx.addMessage(null,saveMsg);
if (!operationBinding.getErrors().isEmpty()) {
FacesContext ctx = FacesContext.getCurrentInstance();
FacesMessage saveMsg = new FacesMessage("Duplicate rows not allowed");
ctx.addMessage(null,saveMsg);
return null;
i want to show only "Duplicate rows not alowed".i want to remove the first two messages given by jdeveloper.
and also i want to display this message at the statusbar below the page.not in popup window.
can anyone help me what i need to do.Hi John,
As you told i created the mesageBundle by following the steps described in the Fusion Developer's Guide section 33.8.3, "How to Customize Error Messages for Database Constraint Violations".now i am able to suppress the first error "
Error
Constraint "DB_UNIQUE" violated during post operation:"Insert" using SQL Statement "BEGIN INSERT INTO DASHBOARD_SECURITY_TAB(LOGIN_USER_ID,GROUP_NAME) VALUES (:1,:2) RETURNING ROWID INTO :3; END;".
and displaying my user friendly message like "Duplicate rows not alowed". using the following code
private static final Object[][] sMessageStrings = new String[][] { {"DB_UNIQUE","Duplicate Rows not allowed"},{"ORA-00001"," "},{"ORA-06512",""}
Here i want suppress the ORA errors also.but using above code only first error got suppressed.not the ORA errors.
Here please tell me what i need to do suppress the ORA errors in the popup window.
The errors i am gertting in popup window are given below.
*Messages for this page are listed below.*
*Error *
*Constraint "DB_UNIQUE" violated during post operation:"Insert" using SQL Statement "BEGIN INSERT INTO DASHBOARD_SECURITY_TAB(LOGIN_USER_ID,GROUP_NAME) VALUES (:1,:2) RETURNING ROWID INTO :3; END;".*
*Error *
*ORA-00001: unique constraint (SCOTT.DB_UNIQUE) violated ORA-06512: at line 1*
I appreciate your time and suggestions .
And also i want to display my userfriendly custom error message in the Status Bar of Panel collection not in a popup window.Is it possible?
Sailaja
Edited by: sj0609 on Mar 15, 2009 5:54 PM
Maybe you are looking for
-
IF statement in Mapping is getting suppressed
Hi all in my mapping i am using IF statement , in which , one of my condition is that if - > condition exist then - > pass XXXXXXXX else _---- > pass YYYYYYY when i check my display queue . in the else part data is there but it is su
-
Can I have two ipod libraries on the same computer?
Can I set up two separate ipods on the same computer? If so, how? I have one set up now, and I want to add another one.
-
Exchange mail cannot work after upgrade to ios 8.3
just upgraded the ios to 8.3 yesterday, and the exchange mail could not work since then. no luck even after deleting and re-add the account. anyone facing the same problem? i will never trust Apple next time to upgrade the new OS at the first day. iP
-
Open PDF files in Firefox browser
how do you open a pdf file in OS 10.9 firefox browser?
-
Hello all, When calling clearing transactions F-03, the system does not display line items that are originated from goods receipts (via transaction MIGO). However, FBL3N shows these line items as open items. What could be causing this? I checked GL m