How to remove excise entry from excise register J2I9

Dear Experts,
I reverse the excise entry(which was posted by j1iex) through J1IH (other adj.) Now I want to remove the excise entry from excise register (J2I9).
Regards
Sanjay Verma

Dear AKPT ji,
Component version SAP ECC 6.0
Sap version - 700,710,701,702
Regards
sanjay

Similar Messages

How to remove an entry from crs_stat which is NOT in ocrdump

Hi experts,
Env; Sun Solairs 10
RAC -- 2 node cluster
verison 10.2.0.3.0
CRS isused
NO vendor clusterware
I've 4 instances running on 10.2.0.3.0.. Creating a new DB on the same ORACLE_HOME using dbca. Hit into a bug 5886151 and aborted the install..
NOW, there were some entries in ocrdump.. so used srvctl ro remove the database from CRS... OCTDUMPFILE is godd now..
However., then I do crs_stat. I do see the below entries..
NAME=ora.<<DBNAME>>.db
TYPE=application
TARGET=OFFLINE
STATE=OFFLINE
How to remove thsi entry???
Thanks
regards
Natrajan

There are "cap" files that contain the information on the resources in crs they are usually located in $CRS_HOME/crs/profile or $CRS_HOME/crs/public I have not tried this but I believe you can edit, remove, etc these files and then run the crs_register command pointing to the directory where the "cap" files are.
If I were you I would probably contact Oracle support before doing this though. Unless this cluster is not being used currently and you can risk this type of operation on your own.

How to remove duplicate entries from Settings General iTunes Wi-Fi Sync?

On my iPhone under Settings > General > iTunes Wi-Fi Sync there is a duplicate entry for my Mac. One is active, the other one shows options greyed out, as if it can't see the Mac on the network (although it's the same name). Is there a way to manually remove that entry from the iPhone?
I am running iOS 7.0.4, and OS X 10.9.1, iTunes 11.1.3 on the Mac.

iPhone 3G doesn't support Wi-Fi sync or IOS 5.1.1. You have to connect to iTunes using the dock connector to sync.
Unless you have a iPhone 3GS or jailbroken.

How to remove an entry from a memory area?

Hi Experts,
We are facing an issue where a user has exported some wrong data to ABAP memory through an export statement.
The export statement that exported the values is:
EXPORT range_tab_epown
range_tab_dpown
popnot TO DATABASE indx(oh) ID indxkey.
Due to the restrictions in the design of the program, EXPORT statement cannot be executed again for this user.
All we want is to erase this data somehow from the memory area OH.
->We do not want to create a Z report which will erase/replace the data through ABAP statements FREE/DELETE.
->Also ,we cannot alter the data through export statement in debugging mode.
->Resetting the buffer of this user through SU53 Or Log-in/ Log-off does not erase the data.
*Please suggest if we can remove the data from ABAP memory (area OH) for a particular user without creating a Z report.
*Is there any utility program or function module that exists which can help us erase this data?
*Also, please throw some light on the memory where the data is getting stored through the above EXPORT statement.
Regards,
Sid

>EXPORT range_tab_epown
>range_tab_dpown
>popnot TO DATABASE indx(oh) ID indxkey.
This export doesn't write to any memory area. As the key words suggest - it writes TO DATABASE. specifically to cluster table indx, with relid oh.
As far as I am aware, there are no utility programs - you will have to have some ABAP developed.
matt

How to remove SMD entries from SLD?

We migrated our systems to new hardware. The SLD still have SMD entries for the old servers, and they show up in the Agent Administration screen on the SLD tab.
I have removed the SAP systems from the SLD, but the SMD instances are still there.
How can I remove unwanted SMD installations from SLD? I cannot even see them...
Thanks in advance for your help.
Edited by: Russell Day on Feb 8, 2011 7:34 PM

This is what you can do:
go to your sld
http://<host>:<port>/sld
Go to "Administration"
Go to "Automatically Updated Data"
Choose a date (if you want to see all data I suggest you choose tomorrow).
A list of items will appear.
Select the things you want to remove from your SLD, you can always identify them by looking at the "last update" collumn, and choose remove.
Confirm the popup.....done!
Hope this helps!
Cheers,
David

Remove duplicate entries from dropdownlist in web dynpro abap

How to remove duplicate entries from dropdownlist in web dynpro abap? Can someone please help me
I have maintained the data in the z table wherein the records of particular fields are repeated but when i show that record in the Web Dynpro application dropdown list, the user should only be able to view the unique data for selection of that particular field.

Hi,
try this code in init method.
use the
Delete adjacent duplicates.
<set the table>
select <f1> from <table> into TABLE <Itab> whre <condition>.
DELETE ADJACENT DUPLICATES FROM <Itab> COMPARING <f1>.
lo_nd_vbap->bind_table( new_items = <itab> set_initial_elements = abap_true ).

TS4062 how do i remove duplicate entries from my phone directory?

question; how do i remove duplicate entries from my phone directory?

go to your contacts icon and choose the one you want to delate
Choose edit, top right and go (scroll) to the bottom of the page and press delete contact

How to add the entries and how to delete the entries from custom Z-table?

Hi Experts,
My requirement is I need to add the entries from program to three custom z-tables . Assume as zabc1,zabc2,zabc3.
Here how to add the entries from program to Z-table.???
And one more requirement is I want to provide a deletion checkbox in selection screen . Initial it was unchecked. If I am giving tick mark then the entries should be deleted from above custom Z-tables. this all will done in backgroung job?
Could you please guide me the logic how to crack this???
Let me know if you need more Info
Thanks
Sanju

Hi Sanjana,
What you can do is to use the ABAP keyword INSERT or MODIFY to add or modify records to a given database table. Here are the syntax taken from SAP documentation:
*Insert Statement
INSERT dbtab
Syntax
INSERT { {INTO target VALUES source }
| { target FROM source } }.
Effect
The INSERT statement inserts one or more rows specified in source in the database table specified in target. The two variants with INTO and VALUES or without INTO with FROM behave identically, with the exception that you cannot specify any internal tables in source after VALUES.
System Fields
The INSERT statement sets the values of the system fields sy-subrc and sy-dbcnt.
sy-subrc Meaning
0 At least one row was inserted.
4 At least one row could not be inserted, because the database table already contains a row with the same primary key or a unique secondary index.
The INSERT statement sets sy-dbcnt to the number of rows inserted.
Note
The inserted rows are finally included in the table in the next database commit. Up until this point, they can still be removed by a database rollback.
*Modify Statement
MODIFY dbtab
Syntax
MODIFY target FROM source.
Effect
The MODIFY statement inserts one or several lines specified in source in the database table specified in target, or overwrites existing lines.
System fields
The MODIFY statement sets the values of the sy-subrc and sy-dbcnt system fields.
sy-subrc Meaning
0 At least one line is inserted or changed.
4 At least one line could not be processed since there is already a line with the same unique name secondary index in the database table.
The MODIFY statement sets sy-dbcnt to the number of processed lines.
Note
The changes are transferred finally to the database table with the next database commit. Up to that point, they can be reversed using a database rollback.
Hope it helps...
P.S. Please award points if it helps...

How to remove duplicates records from output ?

how to remove duplicates records from output ? i used delete adjacent but duplicates records are coming again ..suggest me

hi shruthi,
thanks for ur answer ..but duplicates records coming again
here is my code >> plz check it out
*& Report ZCRM_TROUBLE_TICKET
REPORT zcrm_trouble_ticket.
TYPES : BEGIN OF ty_qmih,
        qmnum TYPE qmnum,
        equnr TYPE equnr,
        iloan TYPE iloan,
        ausvn TYPE ausvn,
        ausbs TYPE ausbs,
        auztv TYPE auztv,
        auztb TYPE auztb,
        iwerk TYPE iwerk,
        END OF ty_qmih,
        BEGIN OF ty_qmel,
        qmnum TYPE qmnum,
        qmtxt TYPE qmtxt,
        indtx TYPE indltx,
        priok TYPE priok,
        strmn TYPE strmn,
        strur TYPE strur,
        ltrmn TYPE ltrmn,
        ltrur TYPE ltrur,
        objnr TYPE qmobjnr,
        arbpl TYPE lgwid,
        vkorg TYPE vkorg,
        vtweg TYPE vtweg,
        spart TYPE spart,
        END OF ty_qmel,
        BEGIN OF ty_ihpa,
        parnr TYPE i_parnr,
        parvw TYPE parvw,
        objnr TYPE qmobjnr,
        END OF ty_ihpa,
        BEGIN OF ty_crhd,
        arbpl TYPE arbpl,
        objid TYPE cr_objid,
        END OF ty_crhd,
        BEGIN OF ty_crtx,
        ktext TYPE cr_ktext,
        objid TYPE cr_objid,
        END OF ty_crtx,
        BEGIN OF ty_qmfe,
        fecod TYPE fecod,
        fegrp TYPE fegrp,
        qmnum TYPE qmnum,
        END OF ty_qmfe,
        BEGIN OF ty_qmur,
        urcod TYPE urcod,
        urgrp TYPE urgrp,
        urtxt TYPE urstx,
        qmnum TYPE qmnum,
        END OF ty_qmur,
        BEGIN OF ty_iloa,
        tplnr TYPE tplnr,
        iloan TYPE iloan,
        END OF ty_iloa,
        BEGIN OF ty_output,
        qmnum TYPE qmnum,
        equnr TYPE equnr,
       iloan TYPE iloan,
        ausvn TYPE ausvn,
        ausbs TYPE ausbs,
        auztv TYPE auztv,
        auztb TYPE auztb,
        iwerk TYPE iwerk,
        qmtxt TYPE qmtxt,
        indtx TYPE indltx,
        priok TYPE priok,
        strmn TYPE strmn,
        strur TYPE strur,
        ltrmn TYPE ltrmn,
        ltrur TYPE ltrur,
       objnr TYPE qmobjnr,
       arbpl TYPE lgwid,
        vkorg TYPE vkorg,
        vtweg TYPE vtweg,
        spart TYPE spart,
        parnr TYPE i_parnr,
        parvw TYPE parvw,
        arbpl TYPE arbpl,
       objid TYPE cr_objid,
       arbpl1 TYPE arbpl,
        ktext TYPE cr_ktext,
        fecod TYPE fecod,
        fegrp TYPE fegrp,
        urcod TYPE urcod,
        urgrp TYPE urgrp,
        urtxt TYPE urstx,
        tplnr TYPE tplnr,
        END OF ty_output.
DATA : it_qmih TYPE STANDARD TABLE OF ty_qmih,
       it_qmel TYPE STANDARD TABLE OF ty_qmel,
       it_ihpa TYPE STANDARD TABLE OF ty_ihpa,
       it_crhd TYPE STANDARD TABLE OF ty_crhd,
       it_crtx TYPE STANDARD TABLE OF ty_crtx,
       it_qmfe TYPE STANDARD TABLE OF ty_qmfe,
       it_qmur TYPE STANDARD TABLE OF ty_qmur,
       it_iloa TYPE STANDARD TABLE OF ty_iloa,
       it_output TYPE STANDARD TABLE OF ty_output,
       wa_qmih TYPE ty_qmih,
       wa_qmel TYPE ty_qmel,
       wa_ihpa TYPE ty_ihpa,
       wa_crhd TYPE ty_crhd,
       wa_crtx TYPE ty_crtx,
       wa_qmfe TYPE ty_qmfe,
       wa_qmur TYPE ty_qmur,
       wa_iloa TYPE ty_iloa,
       wa_output TYPE ty_output.
INITIALIZATION.
REFRESH : it_qmih,
            it_qmel,
            it_ihpa,
            it_crhd,
            it_crtx,
            it_qmfe,
            it_qmur,
            it_iloa,
            it_output.
CLEAR:     wa_qmih,
             wa_qmel,
             wa_ihpa,
             wa_crhd,
             wa_crtx,
             wa_qmfe,
             wa_qmur,
             wa_iloa,
             wa_output.
start-of-selection.
SELECT qmnum
          equnr
          iloan
          ausvn
          ausbs
          auztv
          auztb
          iwerk
          FROM qmih
          INTO TABLE it_qmih.
SORT it_qmih BY qmnum .
DELETE ADJACENT DUPLICATES FROM it_qmih COMPARING qmnum equnr iloan ausvn ausbs auztv auztb iwerk.
SELECT   qmnum
           qmtxt
           indtx
           priok
           strmn
           strur
           ltrmn
           ltrur
           objnr
           arbpl
           vkorg
           vtweg
           spart
           FROM qmel
           INTO TABLE it_qmel
           FOR ALL ENTRIES IN it_qmih
           WHERE qmnum = it_qmih-qmnum.
SORT it_qmel BY qmnum.
DELETE ADJACENT DUPLICATES FROM it_qmel COMPARING qmnum
                                                     qmtxt
                                                     indtx
                                                     strmn
                                                     strur
                                                     ltrmn
                                                     ltrur
                                                     objnr
                                                     arbpl
                                                     vkorg
                                                     vtweg
                                                     spart.
IF it_qmel IS NOT INITIAL.
    SELECT parnr
           parvw
           objnr
           FROM ihpa
           INTO TABLE it_ihpa
           FOR ALL ENTRIES IN it_qmel
           WHERE objnr = it_qmel-objnr.
ENDIF.
DELETE ADJACENT DUPLICATES FROM it_ihpa COMPARING parnr
                                                     parvw
                                                     objnr.
IF it_qmel IS NOT INITIAL.
    SELECT arbpl
           objid
           FROM crhd
           INTO TABLE it_crhd
           FOR ALL ENTRIES IN it_qmel
           WHERE objid = it_qmel-arbpl.
ENDIF.
DELETE ADJACENT DUPLICATES FROM it_crhd COMPARING arbpl
                                                     objid.
IF it_qmel IS NOT INITIAL.
    SELECT ktext
           objid
           FROM crtx
           INTO TABLE it_crtx
           FOR ALL ENTRIES IN it_crhd
           WHERE objid = it_crhd-objid.
ENDIF.
DELETE ADJACENT DUPLICATES FROM it_crtx COMPARING ktext
                                                    objid.
IF it_qmih IS NOT INITIAL.
    SELECT fecod
           fegrp
           qmnum
           FROM qmfe
           INTO TABLE it_qmfe
           FOR ALL ENTRIES IN it_qmih
           WHERE qmnum = it_qmih-qmnum.
ENDIF.
SORT it_qmfe BY qmnum.
DELETE ADJACENT DUPLICATES FROM it_qmfe COMPARING fecod
           fegrp.
IF it_qmih IS NOT INITIAL.
    SELECT urcod
           urgrp
           urtxt
           qmnum
           FROM qmur
           INTO TABLE it_qmur
           FOR ALL ENTRIES IN it_qmih
           WHERE qmnum = it_qmih-qmnum.
ENDIF.
SORT it_qmur BY qmnum.
DELETE ADJACENT DUPLICATES FROM it_qmur COMPARING urcod
                                                     urgrp
                                                     urtxt.
IF it_qmih IS NOT INITIAL.
    SELECT tplnr
            iloan
            FROM iloa
            INTO TABLE it_iloa
            FOR ALL ENTRIES IN it_qmih
            WHERE iloan = it_qmih-iloan.
ENDIF.
DELETE ADJACENT DUPLICATES FROM it_iloa COMPARING tplnr
                                                    iloan.
LOOP AT it_qmih INTO wa_qmih.
    wa_output-qmnum = wa_qmih-qmnum.
    wa_output-equnr = wa_qmih-equnr.
   wa_output-iloan = wa_qmih-iloan.
    wa_output-ausvn = wa_qmih-ausvn.
    wa_output-ausbs = wa_qmih-ausbs.
    wa_output-auztv = wa_qmih-auztv.
    wa_output-auztb = wa_qmih-auztb.
    wa_output-iwerk = wa_qmih-iwerk.
    APPEND wa_output TO it_output.
    CLEAR wa_output.
    READ TABLE it_qmel INTO wa_qmel WITH KEY qmnum = wa_qmih-qmnum.
    wa_output-qmtxt = wa_qmel-qmtxt.
    wa_output-indtx = wa_qmel-indtx.
    wa_output-priok = wa_qmel-priok.
    wa_output-strmn = wa_qmel-strmn.
    wa_output-strur = wa_qmel-strur.
    wa_output-ltrmn = wa_qmel-ltrmn.
    wa_output-ltrur = wa_qmel-ltrur.
   wa_output-objnr = wa_qmel-objnr.
   wa_output-arbpl = wa_qmel-arbpl.
    wa_output-vkorg = wa_qmel-vkorg.
    wa_output-vtweg = wa_qmel-vtweg.
    wa_output-spart = wa_qmel-spart.
    APPEND wa_output TO it_output.
    CLEAR wa_output.
    READ TABLE it_ihpa INTO wa_ihpa WITH KEY objnr = wa_qmel-objnr.
    wa_output-parnr = wa_ihpa-parnr.
    wa_output-parvw = wa_ihpa-parvw.
    APPEND wa_output TO it_output.
    CLEAR wa_output.
    READ TABLE it_crhd INTO wa_crhd WITH KEY objid = wa_qmel-arbpl.
    wa_output-arbpl = wa_crhd-arbpl.
    APPEND wa_output TO it_output.
    CLEAR wa_output.
    READ TABLE it_crtx INTO wa_crtx WITH KEY objid = wa_crhd-objid.
    wa_output-ktext = wa_crtx-ktext.
    APPEND wa_output TO it_output.
    CLEAR wa_output.
    READ TABLE it_qmfe INTO wa_qmfe WITH KEY qmnum = wa_qmih-qmnum.
    wa_output-fecod = wa_qmfe-fecod.
    wa_output-fegrp = wa_qmfe-fegrp.
    APPEND wa_output TO it_output.
    CLEAR wa_output.
    READ TABLE it_qmur INTO wa_qmur WITH KEY qmnum = wa_qmih-qmnum.
    wa_output-urcod = wa_qmur-urcod.
    wa_output-urgrp = wa_qmur-urgrp.
    wa_output-urtxt = wa_qmur-urtxt.
    APPEND wa_output TO it_output.
    CLEAR wa_output.
    READ TABLE it_iloa INTO wa_iloa WITH KEY iloan = wa_qmih-iloan.
    wa_output-tplnr = wa_iloa-tplnr.
    APPEND wa_output TO it_output.
    CLEAR wa_output.
ENDLOOP.
DELETE ADJACENT DUPLICATES FROM it_output COMPARING        qmnum
                                                              equnr
                                                              ausvn
                                                              ausbs
                                                              auztv
                                                              auztb
                                                              iwerk
                                                              qmtxt
                                                              indtx
                                                              priok
                                                              strmn
                                                              strur
                                                              ltrmn
                                                              ltrur
                                                              vkorg
                                                              vtweg
                                                              spart
                                                              parnr
                                                              parvw
                                                              arbpl
                                                              ktext
                                                              fecod
                                                              fegrp
                                                              urcod
                                                              urgrp
                                                              urtxt
                                                              tplnr.
*CALL FUNCTION 'STATUS_TEXT_EDIT'
EXPORTING
CLIENT                  = SY-MANDT
FLG_USER_STAT           = ' '
   objnr                   =
ONLY_ACTIVE             = 'X'
   spras                   = en
BYPASS_BUFFER           = ' '
IMPORTING
ANW_STAT_EXISTING       =
E_STSMA                 =
LINE                    =
USER_LINE               =
STONR                   =
EXCEPTIONS
OBJECT_NOT_FOUND        = 1
OTHERS                  = 2
*IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
*ENDIF.
*CALL FUNCTION 'READ_TEXT'
EXPORTING
CLIENT                        = SY-MANDT
   id                            =
   language                      =
   name                          =
   object                        =
ARCHIVE_HANDLE                = 0
LOCAL_CAT                     = ' '
IMPORTING
HEADER                        =
tables
   lines                         =
EXCEPTIONS
ID                            = 1
LANGUAGE                      = 2
NAME                          = 3
NOT_FOUND                     = 4
OBJECT                        = 5
REFERENCE_CHECK               = 6
WRONG_ACCESS_TO_ARCHIVE       = 7
OTHERS                        = 8
*IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
*ENDIF.
*LOOP AT IT_OUTPUT INTO WA_OUTPUT.
*WRITE : / WA_OUTPUT-qmnum,
         WA_OUTPUT-equnr,
         WA_OUTPUT-iloan,
         WA_OUTPUT-ausvn,
         WA_OUTPUT-ausbs,
         WA_OUTPUT-auztv,
         WA_OUTPUT-auztb,
         WA_OUTPUT-qmtxt,
         WA_OUTPUT-indtx,
         WA_OUTPUT-strmn,
         WA_OUTPUT-strur,
         WA_OUTPUT-ltrmn,
         WA_OUTPUT-ltrur,
         WA_OUTPUT-objnr,
         WA_OUTPUT-arbpl,
         WA_OUTPUT-parnr,
         WA_OUTPUT-parvw,
         WA_OUTPUT-objid,
         WA_OUTPUT-ktext,
         WA_OUTPUT-fecod,
         WA_OUTPUT-fegrp,
         WA_OUTPUT-urcod,
         WA_OUTPUT-urgrp,
         WA_OUTPUT-urtxt,
         WA_OUTPUT-tplnr.
*ENDLOOP.
CALL FUNCTION 'GUI_DOWNLOAD'
    EXPORTING
BIN_FILESIZE                    =
      filename                        = 'E:\CRM1.TXT'
FILETYPE                        = 'ASC'
APPEND                          = ' '
     write_field_separator           = '|'
HEADER                          = '00'
TRUNC_TRAILING_BLANKS           = ' '
WRITE_LF                        = 'X'
COL_SELECT                      = ' '
COL_SELECT_MASK                 = ' '
DAT_MODE                        = ' '
CONFIRM_OVERWRITE               = ' '
NO_AUTH_CHECK                   = ' '
CODEPAGE                        = ' '
IGNORE_CERR                     = ABAP_TRUE
REPLACEMENT                     = '#'
WRITE_BOM                       = ' '
TRUNC_TRAILING_BLANKS_EOL       = 'X'
WK1_N_FORMAT                    = ' '
WK1_N_SIZE                      = ' '
WK1_T_FORMAT                    = ' '
WK1_T_SIZE                      = ' '
WRITE_LF_AFTER_LAST_LINE        = ABAP_TRUE
IMPORTING
FILELENGTH                      =
    TABLES
      data_tab                        = it_output
FIELDNAMES                      =
EXCEPTIONS
FILE_WRITE_ERROR                = 1
NO_BATCH                        = 2
GUI_REFUSE_FILETRANSFER         = 3
INVALID_TYPE                    = 4
NO_AUTHORITY                    = 5
UNKNOWN_ERROR                   = 6
HEADER_NOT_ALLOWED              = 7
SEPARATOR_NOT_ALLOWED           = 8
FILESIZE_NOT_ALLOWED            = 9
HEADER_TOO_LONG                 = 10
DP_ERROR_CREATE                 = 11
DP_ERROR_SEND                   = 12
DP_ERROR_WRITE                  = 13
UNKNOWN_DP_ERROR                = 14
ACCESS_DENIED                   = 15
DP_OUT_OF_MEMORY                = 16
DISK_FULL                       = 17
DP_TIMEOUT                      = 18
FILE_NOT_FOUND                  = 19
DATAPROVIDER_EXCEPTION          = 20
CONTROL_FLUSH_ERROR             = 21
OTHERS                          = 22
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.

[Solved] Removing multiple entries from grub

Hi
There are many entries in my arch's grub boot loader:
Arch Linux pkg-linux kernel
*Arch Linux pkg-linux kernel (fallback initramfs)
Arch Linux
Advanced options for Arch Linux
Linux Mint 15
Advanaced options for Linux Mint 15
Microsoft Windows 7 Professional
But I also want to keep following three entries:
Arch Linux
Linux Mint 15
Microsoft Windows 7 Professional
How can I remove remaining entries from grub menu?
Regards
Last edited by zetrotrack000 (2014-03-11 20:01:45)

Grub2 menu entries are created by a set of scripts in /etc/grub.d
Your first 2 entries are standard for arch and are generated by the 10_archlinux script. The 10_archlinux script is distributed by arch. It exists because the standard 10_linux script does not always create reliable menu entries for arch.
Your other linux entries are generated by the 10_linux script which is distributed by grub upstream.
Your windows entry is generated by the os-prober script. That can just be left alone.
To sort out the redundant linux entries you could try disabling either of the linux scripts and regenerating the menu.
Alternatively, you could disable both linux scripts and define your menu entries manually in the 40_custom script. The syntax for custom menu entries is similar to that of grub legacy. See the grub wiki article for info.
Hope this helps!
Last edited by Chazza (2014-03-10 22:45:18)

How to remove credit card from iphone4s

how to remove credit card from iphone4s

Not sure what you mean by this. Are you trying to remove your credit card information from the App Store/iTunes store?

How to remove available downloads from the list

how to remove available downloads from the list without it resuming when i open itunes or check for available downloads?

There is not a way to remove them from the list. Just let them download, and then delete them from your library when they are done.

How to remove "open dns" from imac

how to remove "open dns" from imac

Unlock the Network preference pane, if necessary, by clicking the lock icon in the lower left corner and entering your password. Cllck Advanced, open the DNS tab, and delete the server addresses. Click OK and then Apply.

How to remove SD Card from the Card Reader slot - Satellite A100?

Hi,
Is there anyone to help me? I inserted a 64 MB SD card in the card reader slot of my Toshiba A100 model. It's the first time i have inserted the card. The card is inside the slot. I can not take it out! I don't have any idea how to remove the card from the card reader slot. I can see the contents of my SD card, can open the files too. But how to remove it out from the slot. Please help me giving your idea to remove the card out from the slot.
Arjun

Hi
In my knowledge the SD card slot doesnt has a any additional helps like the PCMCIA slot to remove the card.
You have to remove it simply. Try to grab the card and move it out. You can try to use the pair of tweezers. Maybe it helps

How to remove sd card from iMac

hi how to remove sd card from imac ,thanks

If your machine is in warranty, be careful not to do anything more that might damage it when removing it from the optical drive. You might even be able to convince an authorized service technician to carefully remove it under warranty from the optical drive. It is a design issue that lets people accidentally insert the SD card in the optical drive. Of course if that's the only copy of your information on the SD card, be sure to let them know that, so they are extra careful not to damage it when removing it.

How to remove excise entry from excise register J2I9

Similar Messages

Maybe you are looking for