How to remove filter or effect ?

I cannot remove effect .

I cannot use undo after save project.
I need to remove effect but I don't need remove any task after effect added.
Example
Task 1 crop photo
Task 2 apply effect
Task 3 add layer
I need to remove task 2 but I don't need remove task 3.
If I use undo function . I will lost task 3.
ส่งจาก iPad ของฉัน
ณ 13 มี.ค. 2555 เวลา 3:10 Luanne Seymour <[email protected]> เขียน:
Re: How to remove filter or effect ?
created by Luanne Seymour in Adobe Photoshop Touch - View the full discussion
Hi hugo2002,
You can remove an effect by using the Undo button. Here is a picture of where you will find it:
http://forums.adobe.com/servlet/JiveServlet/downloadImage/2-4262185-174700/450-337/Undo.pn g
I like to make a copy of my original before I start using effects. I do this by choosing Duplicate Layer from the Add Layers menu. That way I always have the original image to go back to in case I don't like some of my image experiments.
I hope this helps,
Luanne
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4262185#4262185
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4262185#4262185. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Adobe Photoshop Touch by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Similar Messages

Does anyone know how to remove the fisheye effect from a gopro camera, remove it with premiere pro c

Does anyone know how to remove the fisheye effect from a gopro camera, remove it with premiere pro cc.

Use the Lens Distortion effect, set curvature to your liking.

Help! how to remove a movie effect for other scene

Hi I am working on an e-card. I have 2 scene where "Scene 1"
has snow fall effect and "Scene 2" has message and greetings but do
not want the snow fall effect. So far the snow effect run through
out both scene but I need to stop it on scene 2.
The script that i got online is put under frame-script at
Scene 1. How can i make it stop at scene 2 and when the movie loop
back to scene 1 , the snow effect will run again?
Please help. thanks a lot.
Below are the script that i got from a tutorial to create
snow effect. It is put under scene 1 first frame.

rap onEnterframe with if statement testing what scene you are
in if not scene one animation stops. or put snow animation in its
own movie clip.
this.onEnterFrame = function() {
if(scene == 1){
for(var i=0;i<anzahl;i++) {
if(this["schnee"+i]._x>breite+10||this["schnee"+i]._y>hoehe+10
|| ersterlauf<anzahl) {
this["schnee"+i].speed =
(Math.random()*max_speed)+min_speed;
this["schnee"+i]._x = Math.random()*breite;
this["schnee"+i]._y = ersterlauf<anzahl ?
Math.random()*hoehe : 0;
this["schnee"+i]._xscale = this["schnee"+i]._yscale =
this["schnee"+i]._alpha = (Math.random()*max_groesse)+min_groesse;;
this["schnee"+i].r_xy = random(2) == true;
ersterlauf<anzahl ? ersterlauf++ : ersterlauf = anzahl+1;
} else {
if(this["schnee"+i].r_xy) {
this["schnee"+i].go += Math.random()*-0.2;
if(this["schnee"+i].go < -schwing_faktor)
this["schnee"+i].r_xy = false;
} else {
this["schnee"+i].go += Math.random()*0.2;
if(this["schnee"+i].go > schwing_faktor)
this["schnee"+i].r_xy = true;
this["schnee"+i]._x += this["schnee"+i].go;
this["schnee"+i]._y += this["schnee"+i].speed;
something like this.

How to remove an affect?

I was wondering how to remove a blur effect from my design that I created? Also was wondering how to crop using adobe illustrator?

If the effect is still live, you can get to it in the Appearance panel (window menu -> appearance) With your blurred item selected, (it could be an object, a group, or even an entire layer depending on where you applied it) find the blur there in the Apperance panel, select it and click the little trash can button at the bottom of the panel to get rid of it. You can also double-click on the effect to modify it instead, if you'd like.
If the effect is not live, you may be out of luck. Some more details will be needed. (how did you apply the blur?)
To crop, I would think that you'd be looking for a clipping mask:
Select everything you want clipped and group it together (optional, but might help keep you organized) Draw a rectangle (actually any shape you'd like) where you want to crop your art - make sure it's in front of the art. Select the group and the rectangle, right click and select "make clipping mask" (if you're on an old mac or something, it can also be done by selecting them both and going to the Object menu -> clipping mask -> make)
Even if you don't group them all initially, once you make a clipping mask using this method, Illustrator will collect everything together into a group, regardless of how you might've had them organized on layers, so if this is important to you, work on a copy.

Does anyone know how the cutout filter works and is there a way of achieving the same effect without using filters to get more control over final look?

does anyone know how the cutout filter works and is there a way of achieving the same effect without using filters to get more control over final look?

Several ways to get similar results. Image > Adjustments > Posturize with low values similar to what you'd use n Cutout. This is the most flexible way I can think of as you keep the image in RGB mode with layers intact. A more radical approach would be to reduce bit depth using Indexed Colour. You'll need to experiment with settings, try changing Forced to Primaries, and Matte to Foreground Color. There's no going back from this route, although you can change the mode back to RGB to re-enable layers, adjustment layers etc.
A nice thing about the Filter gallery filters is that you can change the layer to a Smart object with all the control that gives you.
Now if only this forum could filter out bizarre content.

How to remove tag using filter

I want to use a filter to remove tags already on emails. I can add tags using a filter but cannot see how to remove tag using filter.

The FiltaQuilla add-on provides a "remove tag" option.
https://addons.mozilla.org/en-US/thunderbird/addon/filtaquilla/
http://www.ramsden.org.uk/3_How_to_install_Add-ons_in_Thunderbird.html
But, out of interest, what's the use case for removing tags by filter? Tags are normally used to facilitate or prompt human intervention and I don't immediately see the value of clearing a tag in a filter. Why tag if a filter will be dealing with it anyway?

How to remove effect presets from a clip?

I'm learning how to use Premiere Elements 8 from Adobe's official Help document.
I'm currently working through Chapter 10, "Applying effects", section "Working with effect presets" -> "Apply an effect preset".
The Help document doesn't tell how to remove an effect preset you had applied.
I've tried to follow the instructions for removing regular effects, but they don't seem to work in the case of presets.
How can i remove effect presets from a clip?

I suspect it's actually a standard PE terminology that i'd better get acquainted with.
I wanted to address this part separately. Actually, "workflow" is more of a video, or at least NLE term, and is not specific to PrE.
As for terminology, this ARTICLE might prove useful.
As I attempt to point out, some of these terms might be applied slightly differently, depending on the exact program used. As a for instance, PrE 8 has moved all of the Export options to Share. I still write "Export/Share" in case a PrE 2 through 7 user reads it. Terms can change. Also, Avid might call one common operation by one name, and Final Cut Pro use a different one.
For me, I had to learn some new terms. I can from a film background. Terms were changed with video. For instance, my old Fade-to-Black is now Dip-to-Black in most NLE's. First time that I typed Fade-to-Black, everyone came back with "huh???"
I read a lot of books on general editing of both video and audio. Some authors use different programs, and though the core theories are the same, their terminology can be rooted in their program of choice.
Also, with regards to audio, many still use a lot of the terminology from the analog days, and keep them, because analog is still part of the workflow in most productions - think of the mics, for instance. There is generally less analog left in video, unless someone needs to telecine film to digital, or transfer VHS tapes to digital. More of the total workflow is all in digital, so my old film school terms have faded.
One of the things that I attempt to do is differentiate exaclty what I am talking about. If I type video, I mean video in general. If I type Video, I am talking about the video Assets in a Project. Notice that Assets is also capatilized, as that is a term from the NLE and is specific to all things, SFX, Video, Audio, etc. used. Sometimes I slip up. I use project to mean the whole thing, and Project to mean the setup in the NLE, that will result in either a .PREL, or .PRPROJ file from my Adobe editors. Does this make sense?
Good luck,
Hunt

How do I remove the spotlight effect on the bottom of my screen? I am running OS 7 on a Macbook. I have already tried the Shift Control Eject.

How do I remove the spotlight effect on the bottom of my screen? I have already tried the Shift+Control+Eject.

Could you please post a screen shot - not sure what you mean by spotlight effect.

How to remove or change wipe effect in MenuBar?

Does anyone know how to remove or change the default wipe
effect in Flex 3's MenuBar? I've seen several mentions online about
an openDuration property in the Menu class, but not in MenuBar. I
would greatly prefer to have either no effect or just a very brief
fade.
A solution in either MXML or ActionScript would be greatly
appreciated.
Thanks very much!
Mike Laurence

We had an old version of Dreamweaver (DW-MX) in which I have found the layer. It apears to be an image made in Photoshop.
The way I solved the problem now is that I deleted the layer in DW-MX and made a new background image. I am no pro, just an amateur
Anyway, thank you very much for your fast reply and the offer to help me out this problem.

How to remove ticking noise and doing audio effects?

I have a snippet of code I got for generating delay effects. After editing the appropriate things, I ran the application. It produces delays but (if i hear it correctly), the delayed sounds do not fade. It sounds like a mix of sounds. Does it depend on feedback? And there's this ticking noise accompanying the output. I just want to know how "ticking sounds" are produced (and probably how to remove them) and how to produce a correct delay.Here's my program.
public void delayProcessor(double[] data, int sampleRate, int delayInMs){
        //initialization
        int delayOffset = (int) ((delayInMs * sampleRate * 1) / 1000);
        double[] buffer = data;
        int k = 0;
        delayBufferSize = data.length + delayOffset;
        delayBuffer = new double[delayBufferSize];
        // Index where dry sample is written
        writeIndex = 0;
        // Index where wet sample is read
        readIndex = data.length;
        for (int i=0; i < data.length; i++)
            double inputSample = data;
double delaySample = delayBuffer[readIndex++];
double outputSample = (inputSample * dryLevel) + (delaySample * wetLevel);
// make sure output is in range
if (outputSample > 1)
outputSample = 1;
else if (outputSample < -1)
outputSample = -1;
// Store in output sample
data[i] = outputSample;
// Calculate feedback
inputSample += (delaySample * feedbackLevel);
// make sure input is in range
if (inputSample > 1)
inputSample = 1;
else if (inputSample < -1)
inputSample = -1;
delayBuffer[writeIndex] = inputSample;
writeIndex++;
// Update indices
readIndex %= delayBufferSize;
writeIndex %= delayBufferSize;
My sample rate depends on the user's desired setting but I'm currently testing on 11025. It's also mono, 16-bits if that information helps.
Thanks in advance! :D

Hi. Updated my code from the one above to this:
public void echoProcessor(double[] samples, double decay, int sampleRate){
     int delayOffset = (int) (10 * sampleRate)/1000;
     int delayBufferSize = samples.length + delayOffset;
     double[] delayBuffer = new delayBuffer[delayBufferSize];
     int writeIndex = 0, readIndex = delayOffset;
     int i =0;
     for(i = 0; i < delayBufferSize; i++)
          delayBuffer[i] = 0;
     for(i = 0; i < samples.length; i++){
          double oldSample = samples;
          double delay = delayBuffer[readIndex];
          double newSample = oldSample + (decay * delay);
          delayBuffer[writeIndex] = outputSample;
          readIndex++;
          writeIndex++;
          if(readIndex == delayBufferSize)
               readIndex = 0;
But I still get the continuous ticking sound but now I hear the sound output which somehow produces an echo.
The double[] samples has a length of 512 then I convert it to bytes before writing to the SourceDataLine. Any ideas?

NightShot Effect...how to remove it from original video

Hello, I recorded about an hour worth of video with my camcorder and the NightShot effect was on... so now I want to put this video on dvd....I was wondering if theres a plugin effect for imovie 5 to remove that nightshot effect and get the colors back again, that green effect looks awful...thank you

... Greg, + for that, my first idea too, ok, in case the camcorder has some additional IR-light, the eyes look a little... spookey, but anyhow.
besides, making videos b/w, plus adding some black borders top/buttom (cinema effect), and if possible add a little slow-mo can make them looking very "stylish"...

Any suggestions on how to remove an "aura" from around a selection? I shoot pictures at rodeos. To make the rider stand out, I select and mask the rider. Next I blur the background using Gaussian Blur filter. This results in a noticeable aura around th

Any suggestions on how to remove an "aura" from around a selection in an image? I shoot pictures at rodeos. To make the rider stand out, I create a mask around the rider and then blur the background with Gaussian Blur. This results in a noticeable blur around the outside of the selection. I have tried using Feathering as well as other Refine Edge Tools. The only thing that works is to go around the edge with the Clone Tool. This is time consuming and not totally successful. So, my two big questions are: (1) Is there a better (simpler) way to avoid the aura? and (2) If not, is there a way to remove the aura that is simpler??
Thanks in Advance,
Art Schwartz

Sorry, what with the long title I had neglected the body of the message and your statement
The only thing that works is to go around the edge with the Clone Tool. This is time consuming and not totally successful.
seems to answer my first question.
Did you do that before or after blurring?
Have you alternatively tried using Content Aware Fill?

How to remove Plosive sounds in Adobe CS5

Hi, I am singing into my dynamic mic using adobe cs5 and for some reason I cannot avoid the harsh plosive sounds being picked up by mic.
When I play it back it makes a huge "PUH" sound and really doesn't sound very nice.
Im sure a program like CS5 will allow me to remove these harsh plosive noises but I dont know how.
Please help
Thanks

Well, all the stuff about getting a recording without the plosives is well and good....but if all you have is the recording in post, then the FFT filter is a good tool to work with.Highlight the plosive (and only the plosive. Try to avoid the rest of the word) -- it will be pretty easy to see in the wave file. Go to the FFT filter in Effects Bring everything below 80Hz down to zero. Then draw a curve so that 100Hz and higher is at 100% and start playing with the curve to find the right amount of frequencies to take out.
I've found in my years of radio work, that cutting out frequencies below 100Hz and leaving the rest alone will work good enough about 60% of the time. There are some plosives that go up to 250Hz and higher...you really can't fix those to take them completely out, but you can make them better. Sometimes it helps to also reduce the amplitude some after you've applied the filter.
But, you'll find that people who pop will pop A LOT...and they always seem to be saying (or singing) things with a lot of P's. So it's always better to use pop filters, mic positionioning, vocal technique, and such during the recording. But I think you'll find that FFT filter will be your friend when all that other stuff isn't enough.
(BTW, I'm sure there's probably somethig you can do with the magic healing brush to accomplish this same thing, I just haven't futtzed with it enough to know how to do it there).
~Dave

How can I use After Effects filters on a whole sequence without getting stuck in After Effects?

It appears that, with the options that are visible to the user, Dynamic Link only goes one-way and can't make round trips from Premiere Pro to After Effects and back again. If I send a sequence to After Effects, that part works fine and I can do what I want and save the comp. However, even though the comp appears as an asset in Premiere Pro, I am not allowed to do anything with it. If I try to drag it to a new sequence, it just says no. If I click "Create Sequence from Clip" it creates an empty sequence.
So how can I use After Effects on whole sequences/tracks instead of just on a clip-by-clip-by-clip-by-clip-by-clip basis? is this possible? For instance, if I have a whole sequence where I've neutralized the white balance, I might want to apply a warming filter to the whole thing as a unit. That would be really painful with even a few clips to keep doing that again and again, and if you want to modify it slightly you have to do it over and over. If there is a way to do that through Dynamic Link through some hidden option, what happens with the audio? Would I have to cut it out of the lower sequence and paste it into the higher sequence with the After Effects comp as a video track?

I'm not an Adoby guy, hence you may ignore my reply, but Adobe Dynamic Link is obviously not just one way ticket and in most cases works just fine.
You have already been explained by J-MS and tclark513 how to properly use it and which pitfalls may occur.
So as to apply an effect onto a whole sequence or a group of clips you need to either nest them in PrPro or pre-compose them in AE. Then just apply an effect (or several ones) onto that composition.
So, if you nest clips in PrPro, select your nested sequence in the timeline, right-click and choose 'Replace with After Effects Composition'. Done! Your dynamically linked AE composition is in the right place in your timeline and in your Project panel as well. If you can not treat it as an ordinary footage, there are obviously some mistakes in your workflow.
If you didn't nest your sequence or a group of clips in PrPro before replacing them with AE composition, you may easily do it within AE. Just select all the layers in AE composition and choose Layer -> Pre-compose... (Ctrl/Cmd+Shift+C) Done! Switch back to your Master comp and apply your desired effect(s)
You may loose some effects or/and transitions while travelling from PrPro to AE via Adobe Dynamic Link, whereas you don't while travelling back
(If you start building your AE composition from scratch right in AE and then need to import it into PrPro, DO NOT export one as PrPro project out of AE, but rather choose Adobe Dynamic Link -> Import After Effects Composition... within PrPro)
P.S. And yes, submit a feature-request so that Adobe will convert 'Transparent Video' into fully functional 'Adjustment Layer'.

How to remove the characters from first and last position of a string?

Hi all,
I am creating an application where i am using vb script to export the data to excel.
In the excel sheet most of the values are entered with double " quotes.
so the entry looks like ""http://www.sap.com"".
Notice that it is starting with "" and not " . so the vb takes it as a line feed and shows an error .
It will be great if anybody can tell me how to remove these set of quotes ,so that the value should come as "http://www.sap.com" . A sample code wil be of great help.
Thanks in advance,
mahima.

Hi,
To modify you excel you have 2 options, 1) you can filter them in excel itself by using filter ...etc in excel itself. or 2) you can do it by using ABAP code.
Below code may help you.
Get the data from Excel to Internal table using FM :
call function 'ALSM_EXCEL_TO_INTERNAL_TABLE'
exporting
    filename                = 'c:\temp\test.xls'
    i_begin_col             = 1
    i_begin_row             = 1
    i_end_col               = w_values
    i_end_row               = 10
tables
    intern                  = t_alsmex_tabline
exceptions
    inconsistent_parameters = 1
    upload_ole              = 2
    others                  = 3.
Now replace all unwanted "" in internal table with space.
replace all occurrences of '""' in itab-field with '   '.
Again you can export to Excel using
call function 'GUI_DOWNLOAD'
    exporting
      filename                = lv_file
      filetype                = 'DAT'
      append                  = ' '
      write_field_separator   = 'X'
    tables
      data_tab                = itab.

How to remove filter or effect ?

Similar Messages

Maybe you are looking for