How to remove flag for deletion for an article in SAP IS Retail

Hi,
I wish to know , is it possible to remove flag for deletion at client level for the article (in SAP Retail System) ?
I have already tried to do remove the flag using the tcode MM06 (MM) method.
But the system says that, it cannot be done for the articles maintained using the retail functions.
I there any other Tcode ?
Or it's the end of the road ??
If possible please reply asap.
Regards,
Anirban Roy

awaiting response.

Similar Messages

Merchandise Category creation for Generic Article in SAP IS-Retail

Hi,
Can anyone help me out to with clear and complete process and settings i have to maintain for merchandise category for generic article for shoes of our client. I created merchandise category with the below transaction codes
ct04,clwe,clwe,clw1 and wg21 but when i used to create generic article i have to find characteristics in variants tab in basic data view in mm41 but i didn't find it.
HELP ME with SCREENSHOTS which will HELP ME in FUTURE of our CLIENT
Thanks & Regards
Gopi Krishna
Mobile:+91 9741042296

Hi Manish,
Thank you for your reply which is the procedure for relevance of variants in creation of generic article.My concern is to know complete merchandise category creation with screenshots which i can create by own merchandise category.
Thanks & Regards
Gopi Krishna Potteti

System is not allowing GR through MIGO for generic article in SAP Is-Retail

Hi,
I am trying to do a GR into DC through MIGO for a generic article and its variants but system is not allowing it saying " The generic article is not maintained in DC". System by design doesn't allow to maintain generic article for specific site but it does for reference site. It did not say anything at the time of PO creation but throwing error during GR. Looking for help!
Thanks in advance!
Subhankar

awaiting response.

How to mark flag for deletion for bulk of customers.

Hi friends,
GM..
I hv a question , that how to mark flag for deletion for bulk of customers.Few function modules are there (eg. HRCA_CUSTOMER_DELETE ) which are going to 'XD06' transaction to set the flag for individual customers.
But data is huge so it's not possible to go & mark the flag for deletion for individual customers.So what is the solution for this.....
waiting for ur reply....
Thanx.
Regards,
Ajit.

Hi Ajit,
XD99 can be used as a appropriate mass deletion tool for customers .
It is good for max 500 customers to mark for deletion, if you have more than that some times you may get dump.
OR
You can write a program to read an excel file into an internal table and call the function BUP_BUPA_MASS_DELETE to delete the customers.
OR
To mark the BP's for Delete use the following code sample.
It marks the BP's for Delete and once you archive them delete them in bulk.
data : BUPANUM type BU_PARTNER,
RETMSG type ITMSG,
ls_central type BAPIBUS1006_CENTRAL,
ls_Central_X type BAPIBUS1006_CENTRAL_X.
ls_central-CENTRALARCHIVINGFLAG = 'X'.
ls_central-CENTRALBLOCK = 'X' .
move-corresponding ls_Central to ls_Central_X.
CALL FUNCTION 'BAPI_BUPA_CENTRAL_CHANGE'
EXPORTING
BUSINESSPARTNER = BUPANUM
CENTRALDATA = ls_Central
CENTRALDATA_X = ls_Central_X
TABLES
RETURN = RETMSG.
if you give me brief i can help you out more.
Thank you .
Regards
Ram

Startup disk is full and the laptop can't operate. How I remove files for it to work?

Startup disk is full and the laptop can't operate. How I remove files for it to work?

Can you turn on the Macbook Pro?
If yes, can you see the hard drive icon?
Have you emptied the trash?

How to set value for radio button in sap crm survey suite

Hi ,
I created a survey in CRM Service, in which I added a question with answer as '10 Selection Button Group ('radio button'). And answer has 11 answer options (which means 11 radio buttions). Now when we test the survey, the value for the radio buttons is appearing like 'id_0050569b03091ee480a29d8ee61e953c'. But i want to set a specific value for each radion button (from 1 to 11). So, how to set value for radio button in sap crm survey suite???.
Thanks & Regards,
Seshu

Hi,
I found solution myself. Click on Goto -> Editing Mode -> Expert Mode. Now you can set value for radio button.
Regards,
Seshu

How to remove password for the recovery mode wizard which you get by pressing command r while booting mac with mac os 10.10?

I've set that password long ago and now forgot on how to remove it.
Should I go to Apple store for this?

It's possible you set a firmware password, see if the password dialog is similar to the one on this site…
http://osxdaily.com/2014/01/06/set-firmware-password-mac/
Those passwords prevent ALL startup key combinations. Confirm it also happens when you boot holding T (target disk mode - How to use and troubleshoot FireWire target disk mode - Apple Support) If that goes to the password dialog you have a firmware password set.
Apple suggest you take it to an Apple store to get it reset, you can't remove the battery or remove RAM to reset this, so only Apple should reset it.

How to remove authorizations for a particular transaction

Hi,
I have an SAP_ALL authorisation for a user. I need to remove authorization for a particular transaction (FK01) for this particular user.
How do i make that.

Hi Marcus ,
u can remove authorization Objects for a given tcode ,but what i am thinking is SAP_ALL will get ride of this child objects , may be i am wrong.
But what i am saying is check that are the authorization which are required to run FK01/XK01 and remove them from that Role .
2.Otherwise check for Object S_Tcode and remove FK01 and XK01.
Regards
Prabhu

How to create index for knowledge article IN CRM 7.0

Hi,
I want to delete the index for Knowledge Article, create again and do the complete compilation.
In webui, Iam able to delete the Index and do complete compilation and Iam not sure how to create the index.
can anyone pl guide
Regards
BABU

Hi,
Once u created a data source. go to respective application component which u have assigned ducring creatinon of DS in RSO2 and right click on it and use replicate metadata.
a popup with options 1. as data source
2. as 3.x data source will come u select 2 one here and go on.

Flag for First Article Inspection report

Hi
My client wants a report to flag the part number for First Article Inspection which was lapsed in production for 2 years.
Historic data is coming from SAP Complex assembly manufacturing solution ( CAMS) and can be extracted using BODS and data is coming from SAP ECC too.
The requirement is to pull the Part number, Part description, Revision and Date manufactured from CAMS and ECC to BW on Hana database and flag the part number which was lapsed 2 years for production.
Please advise me how I should go ahead for this requirement .
Thanks
Ranjith

Hi GS,
What do you mean by first article inspection during manufacturing ?
You create first production order for a material (SFG/FG) and completes the production order make the GR..stock goes in to quality with inspection lot generation..Now till the time this first inspection lot is cleared system should not allow create/release the second production order for the same material..
is this the requirement ????..
if yes... then it is not possible in standard SAP...you need to go for some enhancement...
if no...elaborate your requirement in detail...
Thanks
Kumar

How to configure output for adobe forms in sap,,if i want to pront an invo

Hi,
I used adobe forms in GTS.
BUt in normal SAP system,i want to use adobe form to print an invoice data.
I wantt o use the standard form and standard interface for that.
But how to do configuration for this?
normally for smartforms we do it in NACE transdaction?
But for this adobe forms what is the driver program,,where to configure this form and interface.
Thanks in advance,
sasi

Hello,
it is the same way how you will configure for smart forms.
Standard driver program is : RLB_INVOICE
Please go through this link, how to configure print forms for invoice.
http://****************/Tips/SmartForms/NACE/Configuration.htm
Edited by: rakhi966 on Sep 9, 2011 9:22 PM

How to display image for every article in smartforms

DEAR GURUS ,
i want to display material
(mara-matnr) as well as its image for every material in a smartform .how will i code for this and where will i store my image .
full points will be awarded for the solution . plz send any sample code .
THANKS ,
AMIT RANJAN .

hi,
upload logos using se78 transaction.
then create a window in ur smartform and insert that graphic.
for sample codes check these examples.
SF_EXAMPLE_01
SF_EXAMPLE_02.

Audio Unit Manager: How to remove references to deleted files?

I upgraded my NI software. Replaced Guitar Rig 4 with Guitar Rig 5.
Removed the Guitar Rig 4 components from both system and user Audio/Plugins/Components
directories.
The now-removed plug-ins are still showing in Logic's Audio Unit Manager. Of course they fail validation,
and aren't used. But, leaves a messy listing, and causes other programs (Live, Kore) to also list them try to valid,
and fail.
Any ideas on how to remove these references??

I would love to know this too. I have the worst plug in in the world ( Universal UVI Player) haging around my system although I removed it from all "visible' places.

How do remove commitment value in the PO ? any SAP note avl?

Hi,
Project (WBS)releated service PO (Account assignment category P and Item category D), in which SES,GR,IR have been completed for entire Project services for the year 2005,PO history also updatd for SES, GR,IR in the 2005 only.But Now system is showing still commitment value in the PO for the year 2009?.
Henece how do remove the inconsistency of the commitment value in the PO for the year 2009?. (i.e value is comming from COOI table entry).Is there any SAP NOTEs are available for this case?
Note:
But this case no PR has been refered in the PO. PO has been directly created, and PO QTY,Value changes have not been done after SES,GR,IR completion.
But still system commitment value is showing in the PO for the year 2009, so HOW do remove the value?
i am looking suitable answers.
Regards,
kumar

Hi,
Pre-requisites for a commitment update are:
o In transaction OKKP, the commitment management indicator must be
       active for the given controlling area in the current fiscal year.
The controlling area is the highest organizational unit in Controlling,
however this area is missing from the accounting data of the PO.
o The accounting objects must be active for commitments:
- Work orders: The commitment management indicator must be set
          in transaction KOT2 for the given order type.
- Cost centers: In transaction KS02, in register "Control", the
          commitment update indicator must NOT be set.
- Projects: see note 47992
o In transaction CUNI, the unit of measurements used at item level
       must be set to value based commitment.
Please check the following notes 152571, 634298, 459509 and
772206 carefully and also 165823.
Please check also if the "delivery complete" indicator is set in the PO item (see note 735404).
Usually for service POs the "Delivery completed" indicator will be
hidden and this indicator is fully controlled by the "final entry
sheet" indicator in ML81N. You must allow to set this indicator trough a field selection customizing for your PO item.
Regards,
Edit

How to check the sales stock of an article in SAP Retail

Hi SAP Leaders,
I just want w how can i check the sales stock of an article in SAP retail.
I have to archive the sales stock of an article. IN WSE1 , it showed the article cannot b be archived as there are open sales stock. HOw can i check the sales stock of an article in SAP Retail and archive it finally.
Regards.
SS

Hi sumi,
pls check Material Stock ALM_ME_090_CUST_USER and * ACBAPI01 EXIT_SAPLACC4_001 Accounting: ... material master (Retail) * MGV00003 ... Enhancement for article master: IDoc ... Changes in the Workflow Parameters ... 41. PROACT Stock and sales data * ... EXIT_SAPLWPUE_105 Check.
Regards
Sridhar

How to remove flag for deletion for an article in SAP IS Retail

Similar Messages

Maybe you are looking for