How to remove fluoroscopy caused by Scanning a doublesided sheet?

Hello dear community,
I'm from germany, sorry for my bad english.
I scanned some pages with my scanner and the pages are flouroscopied.
There are them:
http://tai08.de/dateien/pci_aufbau.jpg
http://tai08.de/dateien/pci_spezifikationen.jpg
http://tai08.de/dateien/pcie_switching.jpg
How to remove this in Photoshop CS3? Consider that I'm very new in Photoshop but I can understand english words good:-)
Thank you for your help. Warm regards from Germany.

::By the way, do you know how to scan single sides of a book wihtou
these inner "edges" --> I mean the inner waves/shafts (its not plane).
Sadly, the only "trick" I know for this is to cut the book apart. You
probably do not want to do this. Someone else may know a way, or there may
well be specialized equipment that does not require destroying the book.
As for duplicating your illustrations in Illustrator or similar programs, I
would place the image you wish to duplicate on the bottom layer, with that
layer locked and dimmed. On a new layer above it, you can use the old art as
a guide for quickly drawing new art.

Similar Messages

How to remove shadow? Need to know how to remove shadow cause by on Camara flash?

How to remove shadow? Need to know how to remove shadow cause by on Camara flash?

You might find some of this useful:
http://www.photographyboard.net/removing-flash-shadow-in-photoshop-5407723.html

How to remove dark areas from scanned book PDFs?

Hello,
When scanning chapters from a book, I get large dark areas where the scanner picks up 'dead space' from the spine and around the perimeter of the book. I have been able to remove these using the 'Redaction' tool but when I go to save the PDF the size of the file at least doubles in size. Is there a better way to remove dark areas and, if not, is there a way to reduce the size of the PDF without reducing the quality of the text?
Thanks.

Thanks Bill@VT.
I have been able to remove the dark areas using the redaction tool but when I go to save all my files are at least twice their original size.
How can I stop this from happening?

How to remove bands caused by dot structure of printed original

Using digital photography to capture the image of a large poster printed with dot structure. Portions of the image have bands caused by the pattern of dots. Resizing and rotating doesn't reduce or eliminate. What is the best way to remove these bands in Photoshop? Note: clone tool not satisfactory (causes fuzziness, blurring). Tried selecting the affected area(s) and using Gaussian Blur but bands are too wide. Same for Dust and Scratches. Maybe there isn't a good way to remove them. Anyone have experience with this?

As Curt says. It is Moiré pattern from the dots. This one goes way back to the legendary Wayne Fulton's Scan Tips.Com which was set up in 1997!
http://www.scantips.com/basics06.html
http://www.scantips.com/basics6b.html
http://www.scantips.com/basics6c.html
Go through the above links, and get back if you have problems.

How to remove texture from a scanned photograph

PSE 8, Epson Perfection V700 Photo scanner, Windows XP
I am scanning some old photos to use in a photobook. The photos were printed on textured paper. The texture is not really noticeable on the original photo but quite noticeable on the scanned image where the scanner picks up the hills and valleys. Can someone suggest a way to minimize the texture without blurring the sharpness of the image or is that a contradiction in terms?
Thanks. Eva

Did you try screening using the scanner's "Descreen" filter. You'll find it in the professional mode. The below article is about your scanner and shows a screen shot of Professional mode.
http://creativemac.digitalmedianet.com/articles/viewarticle.jsp?id=75660&afterinter=true
When you click the + beside Descreen, you should get several options.
This is one of my epson scanners...not your model but the options should be the same or similar.
If you can't scan again or it doesn't solve the problem, have a look at this article.
http://www.scantips.com/basics6c.html

How to remove 'ripple' caused by vibration

Hi,
Fairly new to editing in Adobe CS. But I am having problems with one of my clips, and I just cannot figure out a solution.
I fly a multicopter with a gopro moounted. Today I had to use a 'backup' drone of mine that occasionaliy give me video with a ;ripple' caused by vibration from the props. Usually I just cut out the video that has this ripple, but the video I have now has it all, and I cannot figure out an effect, or fix in either Premiere Pro or After effects to clean it up.
An example of this is here: https://www.youtube.com/watch?v=sqH_dZDsCIM
Youtubes compression makes it looks worse than it really is, but you get the idea of the problem.
Help please.

Okay I am deleting me first response because I didn't look at your video, I just assumed, and assumed incorrectly that you were talking about rolling shutter problems. The flicker you are seeing is caused by lens flare because you have no lens hood and the sunlight is coming down through the props. There's a great deflicker plug-in that will probably fix your shot.
Flicker Free: Deflicker Time Lapse, LED flicker, and Slow motion
In case you're wondering about what I said before, I had assumed that your problem was caused by Rolling shutter problems. The best way to solve rolling shutter problems is to shoot a high frame rate then run warp stabilizer or a rolling shutter repair plug-in. There are several to choose from.

My ipod wont let me buy any apps because it says i have an invalid security code for my moms credit card but its the right one. and it also says i owe money for upgrading an app does anyone know how to remove my moms credit card cause i cant figure itout

my ipod wont let me buy any appps because it says i have an invalid security code for my moms credit card but its the right one. and it also says i owe money for upgrading an app does anyone know how to remove my moms credit card cause i cant figure itout

To change asccount information see:
Changing Account Information
For the code issue this may help.
iTunes Store: My credit card's security code or zip code does not match my bank's records
For a standard iTunes account you need a valid payment method even for free apps and app updates.
What is making it think that you own money for an app upgrade?

How to remove the installed JDeveloper Update causing error

Hello there,
I install some webcenter available updates this morning...after restarting the JDeveloper11gR1 I am experiening error.
Can someone tell me how to remove the newly installed update so that I do not experience this errors again?

As the last resort you can rename the systemxx.x.x.x.x. folder and restart jdev again. When you are asked if you like to migrate, answer no as the error is likely to be migrated too.
If this does not help you can uninstall jdev, remove the whole installation folder and reinstall jdev.
Timo

How to 'Remove' user access from deleted dual boot system's users in existing operating system's folders and files?

I have Windows 7 Enterprise Professional, accessed earlier from (now deleted) other dual boot operating system (User folder), which shows it's users as unknowns for folder properties in Windows 7 Enterprise Professional's "C:\Users\Aniruddha",
which causes system not responding, how to 'Remove' these unknown users from folder properties of "C:\Users\Aniruddha"?
Also "C:\Users\Aniruddha\Application Data" creates many of own folders within eachselfs end folder ("C:\Users\Aniruddha\Application Data" creates a "C:\Users\Aniruddha\Application Data\Application Data", "C:\Users\Aniruddha\Application
Data\Application Data" creates a "C:\Users\Aniruddha\Application Data\Application Data\Application Data" and many) because of which system stops responding randomly, starts responding only for "ctrl+alt+del", why such self
creation begins?
Whether a standby user with same file structure copied from a user would dynamically link it's shortcut folders with Windows user from whom these folders were copied or whether there would be no link and for above said problem I would restore User's file structre
back to normal just by copying from standby user?

It seems your PC is infected with some malware. Use a trusted antivirus software with the latest definition updates installed to scan and remove the malware.
Balaji Kundalam

How to remove noproblempc Find a Pro

A widget called "Find a Pro" by "noproblemppc"randomly appeared, and it's not in the Add-ons at all (even though their own webpage says that's how to remove it), so I'm not sure how to get rid of it it. I also went to my computer's control panel to see if it was installed there, but no luck. Anyone know how to get rid of it? Thanks so much!

Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
*https://support.mozilla.org/kb/remove-toolbar-has-taken-over-your-firefox-search-
Do a malware check with some malware scanning programs on the Windows computer. 
Please scan with all programs because each program detects different malware. 
All these programs have free versions.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware: http://www.malwarebytes.org/mbam.php
*AdwCleaner: http://www.bleepingcomputer.com/download/adwcleaner/ http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
*SuperAntispyware: http://www.superantispyware.com/
*Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender: Home Page: http://www.microsoft.com/windows/products/winfamily/defender/default.mspx
*Spybot Search & Destroy: http://www.safer-networking.org/en/index.html
*Kasperky Free Security Scan: http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*Anti-rootkit utility TDSSKiller: http://support.kaspersky.com/5350?el=88446
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

How to remove Sweetpicks from my system?

How to remove Sweet picks from my system? I am running XP SP3

Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us!

How to remove viruses: savingsbullfilter and levelqualitywatcher32?

How to remove viruses: savingsbullfilterservice.exe and levelqualitywatcher32.exe? Microsoft Security
Essentials appears to remove these pop-up ad virus programs for one day, but the next day they are back. Any help is appreciated.
Thanks!

Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
'''<h2>Make sure you scan with ALL programs listed above.</h2>'''
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us!

How to remove database profile in report

Hello,
We have a report right now and upon accessing it, a window asking for a Database Profile comes out. This causes the program to have additional selection parameters for Project Definiton, WBS element etc.
Before we just ran the report for Period, Year, Cost Center Group. Ever since the Database Profile appeared we now have to put * in the WBS element so that the report will run.
Anyone know how to remove the Database Profile selection? One of our users reported that this wasn't in the selection parameters and our developer said there were no changes to the report.
Are there possible reasons why the Database Profile suddenly appeared?
FYI, the report was created using Report Groups (GR51/2/3)
Thanks.

Hi,
What selection criteria you need?
Database profile is needed to access objects from Logical PS DB. You have to put at least one selection object viz. Project Definition or WBS, or Network or Activity.
Create one of your own profile as per requirements and default it in user param.
Regards,
Harsh.
Edited by: Harsh Saxena on Jul 8, 2011 1:13 PM

How to remove xmlns in node level

Hi Experts!
How to remove xmlns in node level in response xml file. I tried to use AF_Modules/XMLAnonymizerBean, but it did not work.
Can you please help me out on this.
I want to remvoe xmlns tag in LEVICOM
Eg:
- <Addenda>
 - <LEVICOM xmlns="">
Thanks,
Hari

Hi Expers!
Please help me out on this. The below xslt mapping working only to remove xmlns prefix in xml file, if parent having only one child. This code is not working if parent having multiple childs.
Eg: <parent>
 <phild xmlns="">
 test1
 </phild>
 </parent>
The above example working fine with below xslt mapping to remove xmlns tag.
Second scenarion not working
Eg: <parent>
 <child1 xmlns="">
 test1
 </child1>
 <child2 xmlns="">
 test2
 </child2>
 </parent>
The above example is not working.
Here is the code:
You can remove the namespace prefixes using an XSLT mapping if they are causing problems with applications outside of XI.
Try the following code:
<?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
xmlns="http://www.arconw.com/XI/XSLT_Library/XmlNamespacePrefixRemoval"
version="1.0">
<xsl:output method = "xml" />
<xsl:template match="/">
<xsl:apply-templates select="*" mode="remprefix"/>
</xsl:template>
<xsl:template match="*" mode="remprefix">
<xsl:variable name="newname" select="local-name(.)"/>
<xsl:element name="{$newname}" namespace ="{namespace-uri()}">
<xsl:apply-templates mode="copyall" select="@*|comment()|processing-instruction()|text()"/>
<xsl:apply-templates select="*" mode="remprefix"/>
</xsl:element>
</xsl:template>
<xsl:template mode="copyall" match="@*|comment()|processing-instruction()|text()">
<xsl:copy>
<xsl:apply-templates mode="copyall" select="@*|comment()|processing-instruction()|text()"/>
</xsl:copy>
</xsl:template>
</xsl:stylesheet>
Thanks,
Hari

How to remove discoloration in WP-DC34 underwater casing?

how to remove discoloration in WP-DC34 underwater casing?

the inside of the underwater casing discolored. It used to be a clear see-thru case but now, it has this white colored substance on the inside that makes it hard to see the display of the camera. I don't know what caused it. I wasn't able to use it for a long time and when i did used it on a swimming trip, after i've rinsed it and left it over night, the next day the discoloration appeared. I thought that it might have been caused by salt deposit so i soaked the inside of the casing with water and left it over night. The next day, it got worst. So took it out, tried washing it with soap and dishwashing soap, didn't work. I tried rubbing it with clothe, it cleared a little bit, but still there. I'll take a picture of it and post it here so that you'll have a visual of what i'm talking about, the white substance in the casing.

How to remove fluoroscopy caused by Scanning a doublesided sheet?

Similar Messages

Maybe you are looking for