How to remove ghost space on Camera Roll under Usage. No photos on camera. 545MB shown on Camera Roll and 1.8MB on Photo Stream

How to remove ghost space on Camera Roll under Usage. No photos on camera. 545MB shown on Camera Roll and 1.8MB on Photo Stream?
Trying to clean up space to download updated iOS. Thanks!
Have tried unsuccessfully the left swipe and pressing the red delete. No change.

The only problem is I have only 1.6GB available and need 3.7 to update to the iOS7. I also have 2.6GB in the "Other" catagory. How do I access the "Others" area in iTunes in order to see what is there and what I might be able to delete in order to create the amount of space needed. Thanks for your help!

Similar Messages

How to remove white space between two answer reports

How to remove white space between two answer reports
In Dashboard section I have 2 rqeuest. Each request renders Table View. When I display dashboard, it show white space separating the 2 table views. How do I get rid of the white space/white band ?

See this link
Re: Eliminating the space between two reports in OBIEE dashboard page Section
Regards,
Sandeep

How to remove footer space in Table

I have created a table in main window. after creating main area section, the footer section is appearing as an empty at the bottom. I tried to remove this space by giving zero height to the footer height, but the value is not accepted by the system. How can I remove the space created by the footer?
rajan

Hi Rajan,
Can you please tell me how did you solve this problem ?
I am facing the same issue in smartforms.
Regards,
Nitin.

How to remove empty space from a file

Hi all,
Can any one help on how to remove the blank spaces from a file.
I used trim function but unable to remove the spaces.
I have a file in which there is a name like 'JAIRAM' and am storing this file in a variable FILE_CONTENTS.
Now am unable to compare FILE_CONTENTS with another value as it is storing empty spaces also from the file.
Please help on this
Thanks,
Srini

Trim only trim at the beginning or at the end. Can you try using the replace sql function.. see below..
SQL> select replace('abc def',' ','') from dual ;
REPLAC
abcdef
cheers

How to remove empty space in CSS table and move spry menu bar?

Hello! I created www.stonecreekha.com about a year ago basically by watching youtube tutorials and haven't done much with it since so I've forgotten everything! In IE7, everything appears as it should; but in Firefox and IE8, the spry menu bar is positioned slightly higher than it should be (it slightly cuts off the foot of the golfer) and there is an empty space between the navigation bar and the photo. The source code can be viewed from the website. Here are some pics:
IE7 - how it is supposed to look:
IE8:
Firefox:
Dreamweaver:
So basically, I need to know how to remove that empty space between the navigation bar and the picture, and how to move the spry menu bar down a few pixels, in a way that it looks correct in IE8 and Firefox, and preferably IE7 as well.
P.S. I'm a noob so if you could be as specific as possible on what to do in Dreamweaver I'd really appreciate it. Thanks

I belive it's because of the -minus margin being used on the navbar, that you will need to use a negative margin to bring up both the left and right bodyArea divs.
Try : margin-top: -18px; on both divs. You may need to play around with that to get it more precise.
Again, not sure what effect that has on IE as I can't test it.
If it affects IE, then you may need to feed IE a conditional comment for the placement of those divs.

How to remove the space in the info object level?

Hi,
I created a Master Data info Object and gave the data type as <b>Char</b> and length as <b>30</b>.
From the source system I am getting the data of length 9. But at PSA level I am getting some erroneous records.
Example: Data from the source system 'a12345678'
Data in PSA 'a12345678b' -
*** where b - Blank
With out changing the length how can I remove the spaces (Blank)?
Can any one suggest me how to remove, where and what to apply ?
I need to do any settings at the info object level or at the Transfer Rule?
Please provide the each and every step to resolve my problem.
Thank you

Hey you can allow space in RSKC tcode and execute it... .that's it .
and below is the routine for invalid chars and you can have this in update rules ..
data: w_fielda(x) type c.
data: w_result(x) type c.
data: w_temp_field(1) type c.
data: w_count type i.
w_fielda = COMM_STRUCTURE-/BIC/Zxxxxxx.
w_count = 0.
do x times.
clear w_temp_field.
w_temp_field = w_fielda+w_count(1).
if w_temp_field CA
'!"%&''()*+,-./:;<=>? _0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ'.
w_result+w_count(1) = w_temp_field.
endif.
w_count = w_count + 1.
enddo.

How to remove blank spaces in the source code of my page?

I created a page with the following code for testing:
<dsp:page>
<dsp:importbean bean="/atg/commerce/catalog/ProductLookup"/>
     <dsp:droplet name="ProductLookup">
          <dsp:param name="id" value="xprod2046" />
          <dsp:param name="elementName" value="product" />
          <dsp:oparam name="output">
               <dsp:valueof param="product.DisplayName"/>
          </dsp:oparam>
     </dsp:droplet>
</dsp:page>
It only shows the product name in the browser. But if I look at the source code of my page he created 61 lines in response to this code, where a line is the product name and the other 60 have nothing.
I know how to remove these lines that the ATG creates no content because my project is full of these empty lines.
Anyone ever had this problem and could help me?
Thanks

Hi ,
Yup this is a problem ,
you can use following ways :
1- use jsp comments eg :
<dsp:page>
<dsp:importbean bean="/atg/commerce/catalog/ProductLookup"/><%--
     ----%><dsp:droplet name="ProductLookup"><%--
          ----%><dsp:param name="id" value="xprod2046" /><%--
          ----%><dsp:param name="elementName" value="product" /><%--
          ----%><dsp:oparam name="output"><%--
               ----%><dsp:valueof param="product.DisplayName"/><%--
          ----%></dsp:oparam><%--
     ----%></dsp:droplet><%--
----%></dsp:page>
2- End tags at next line :
e g :
* <dsp:page
* ><dsp:droplet name=”xyz”
* ><dsp:oparam name=”output”
* >Name: <dsp:valueof param=”abc”
* /></dsp:oparam
* ></dsp:droplet
* ></dsp:page>
3- Always use TAB instead of using SPACEBAR whie writing source code.
4 - From JSP 2.1 onwards we have a page directive trimwhitespaces ( see if that works , i was not able to ), google for it for more info
5 - You can modify your build scripts to remove white spaces from jsps while building EAR.(complex though, as you may not want to trim all white space.)
6 - modifying the deployment descriptor.
<init-param>
<param-name>trimSpaces</param-name>
<param-value>true</param-value>
</init-param>

How to remove Name space and Software Component in XI??

Hi Frnds,
How to delete Software Component and Name spaces.
Please share me any documents.
Regards,
Raj

Hi Raja,
Check the sap help
http://help.sap.com/saphelp_nw04s/helpdata/en/e8/c5fe4e336c4fdd89eb5fe5abc02865/frameset.htm
Re: How to Remove Components
Thanks!

How to remove extra spaces from Data Matrix Label?

Hi All,
Kindly let me know how we can remove extra spaces from Data Matrix Label.
Suppose we have this following code in SO10.
^FO1380,1879^COY,78^BY4^BXR,6,200^FH^FD[)>_1E06_1DF01001T_1D6JUN&v_huf&&v_hul&_1DV&v_supnum1&_1D16K&v_del&_1D6D&v_flddat1&095_1D2L&v_unload&_1D
P&v_article&_1D4L&v_madein&_1D_1E_04^FS.
Variable have there own value. and the desired result will be shown like the attachment.
But in my code it splits into new line when CMIR value has 3 spaces.
If CMIR value is 1S0 820 355 A . then it creats a new line.
Kindly suggest me any possible solution.
Thanks,
Partha

Hi Gaurav,
In print preview we can't see any space or new line. But when it scanned by TSB (barcode scanner) it will generate a new line when there is 3 space CMIR value.
So where should I write SHIFT CMIR LEFT DELETING LEADING space this code?
Because there is no space coming at the time of debugging or print preview.
And in SO10 the code written as
^FO1380,1879^BY4^BXR,6,200^FH^FD[)>
Here CMIR value is 1SO 820 303 A
and generated output is like this.
And desired output should be like this.

How to remove extract space between pages in smartform without changing output

Hello Experts,
I've been given a requirement where I need to remove extra space between pages of a smartform (refer to the attachment). If you look at the following screen shot then you will notice that that there is a command provided to display details on these pages which has a checkbox 'Go to New Page'.
When I removed the above New Page comment then still I don't see the expected output (Refer to the attached screen shot 'Expected' to see what I need).
Also there is another there is another New Page command (as shown below).
When I tried to removed the above New Page Command then output was totally changed which user don't want (as shown below. Table should have been break on BCVI on red line, which happens today but with so much extra space).
To view the correct output how user want please have a look at 'Expected' screen shot.
Now the question is what change I should make in my smartform to accomplish the expected output.
Many thanks in advance.

Hello,
I think that it should work, this construction of an loop node including all relevant items and at the event TAB event sort field only these items are copied in the OUTPUT_TAB which should be printed in a separate table on the form. After having printed the table, the content of the internal table is cleared.
I suppose that you first should check if this TAB "event sort field" includes the correct criteria for the necessary group change. If this event is really defined correctly, then I only have one hint for you.
I know that the only possibility to define a page break in a table in the Window MAIN is to use the following technique:
Define an outside loop node and in this loop node a table node, but this table does not have a internal table to be looped through. It includes only the fields to be printed, maybe you have to re-design your table node.
By the way only then you can define a command node including a page break during the processing of an internal table.
Regards
Juergen

How to remove white spaces from XML content using Coldfusion?

Hi,
Can anybody help me in removing white spaces in between the tags from the below XML content using coldfusion?
XML content:
<?xml version="1.0" encoding="UTF-8"?> <chart showdates="true" today="08/12/2009"> <phases> <phase color="CCFFCC" name="Funded"/> <phase color="CDCD67" name="Concept"/> <phase color="99CCFF" name="Feasibility"/> <phase color="0099FF" name="Development"/> <phase color="0099FF" name="Development"/> <phase color="CC99FF" name="Close-out"/> <phase color="909090" name="Sustaining"/> </phases><program name=""> <project enddate=" 30/03/2007 " id="43250" startdate=" 28/02/2006 "> <version enddate=" 30/03/2007 " number=" 1" startdate=" 28/02/2006 "> <phase color="CCFFCC" currentdate="23/03/2006" name="Project Start" plandate="28/02/2006" type="phase"/> <phase color="99CCFF" currentdate="04/04/2006" name="Feasibility Closure" plandate="31/05/2006" type="phase"/> <phase color="0099FF" currentdate="29/03/2007" name="Commercialization" plandate="30/12/2006" type="phase"/> <phase color="CC99FF" currentdate="30/03/2007" name="Project Closed" plandate="30/03/2007" type="phase"/> <phase color="909090" currentdate="" name="Obsolescence" plandate="" type="phase"/> </version> </project> </program> </chart>
Output I am expecting is like below,
<?xml version="1.0" encoding="UTF-8"?><chart showdates="true" today="08/12/2009"><phases><phase color="CCFFCC" name="Funded"/><phase color="CDCD67" name="Concept"/><phase color="99CCFF" name="Feasibility"/><phase color="0099FF" name="Development"/><phase color="0099FF" name="Development"/><phase color="CC99FF" name="Close-out"/><phase color="909090" name="Sustaining"/></phases><program name=""><project enddate=" 30/03/2007 " id="43250" startdate=" 28/02/2006 "><version enddate=" 30/03/2007 " number=" 1" startdate=" 28/02/2006 "><phase color="CCFFCC" currentdate="23/03/2006" name="Project Start" plandate="28/02/2006" type="phase"/><phase color="99CCFF" currentdate="04/04/2006" name="Feasibility Closure" plandate="31/05/2006" type="phase"/><phase color="0099FF" currentdate="29/03/2007" name="Commercialization" plandate="30/12/2006" type="phase"/><phase color="CC99FF" currentdate="30/03/2007" name="Project Closed" plandate="30/03/2007" type="phase"/><phase color="909090" currentdate="" name="Obsolescence" plandate="" type="phase"/></version> </project></program></chart>
Thanks in advance,
Regards,
Manoz.

Daverms,
Thanks for the quick turn around..
I have applied the solution what you suggested above (<cfprocessingdrirective suppresswhitespaces="yes"), still whitespaces are existing in my output.
The output what I am getting is,
(blue color part is my output & red color indicates whitespaces)
<?xml version="1.0" encoding="UTF-8"?>
<chart showdates="true" today="09/12/2009">
<phases>
<phase color="CCFFCC" name="Funded"/>
<phase color="CDCD67" name="Concept"/>
<phase color="99CCFF" name="Feasibility"/>
<phase color="0099FF" name="Development"/>
<phase color="0099FF" name="Development"/>
<phase color="CC99FF" name="Close-out"/>
<phase color="909090" name="Sustaining"/>
</phases>
<program name="">
<project enddate=" 01/01/2010 " id="12059" startdate=" 20/06/2003 ">
<version enddate=" 01/01/2010 " number=" 1" startdate=" 20/06/2003 ">
        <phase color="CCFFCC" currentdate="20/06/2003" name="Project Start" plandate="20/06/2003" type="phase"/>
        <phase color="CDCD67" currentdate="" name="Concept Closure" plandate="" type="phase"/>
        <phase color="99CCFF" currentdate="20/06/2003" name="Feasibility Closure" plandate="20/06/2003" type="phase"/>
        <phase color="F0FF00" currentdate="" name="Alpha Test" plandate="" type="milestone"/>
        <phase color="F0FF00" currentdate="26/07/2004" name="Beta Test" plandate="31/05/2004" type="milestone"/>
        <phase color="0099FF" currentdate="29/06/2005" name="Commercialization" plandate="08/12/2004" type="phase"/>
        <phase color="CC99FF" currentdate="24/02/2006" name="Project Closed" plandate="01/01/2010" type="phase"/>
        </version>
<subproject enddate=" 16/10/2008 " id="11809" name="espWatcher Pricing Toolkit" startdate=" 01/08/2003 ">
<version enddate=" 16/10/2008 " number=" 1" startdate=" 01/08/2003 ">
        <phase color="CCFFCC" currentdate="01/08/2003" name="Project Start" plandate="01/08/2003" type="phase"/>
        <phase color="99CCFF" currentdate="" name="Feasibility Closure" plandate="" type="phase"/>
        <phase color="0099FF" currentdate="15/06/2005" name="Commercialization" plandate="08/12/2004" type="phase"/>
        <phase color="CC99FF" currentdate="16/10/2008" name="Project Closed" plandate="16/10/2008" type="phase"/>
        </version>
</subproject>
<subproject enddate=" 31/12/2070 " id="35704" name="espWatcher version 2 (2005)" startdate=" 01/01/2005 ">
<version enddate=" 31/12/2070 " number=" 1" startdate=" 01/01/2005 ">
        <phase color="CCFFCC" currentdate="01/01/2005" name="Project Start" plandate="01/01/2005" type="phase"/>
        <phase color="99CCFF" currentdate="01/07/2005" name="Feasibility Closure" plandate="01/07/2005" type="phase"/>
        <phase color="0099FF" currentdate="31/03/2006" name="Commercialization" plandate="31/03/2006" type="phase"/>
        <phase color="CC99FF" currentdate="31/12/2070" name="Project Closed" plandate="31/12/2070" type="phase"/>
        </version>
</subproject>
</project>
</program>
</chart>
However this solution removes most of the whitespaces, I want exact output as flash file is expecting so..
Where ever I am calling the CF functions, there I am getting the whitespaces. like below cases.
startdate="#getProjectStartDate(sProjectIdList)#" -> output I am getting for this statement is -> " 12/09/2009 "
Please assist me...
Regards,
Manoz.

How to remove extra spaces in a xml formatted string

Hi,
I am trying to remove extra spaces between the xml tags. For
example, if a string is something like
' <header 1> <header 2> test </header 2> </header1>'
I want to get rid of the spaces only between the closing tag of header 1 and opening tag of header 2 and closing tag of header 2 and opening tag of header 1, in short ,I want to remove the extra spaces between the tags if there are no other characters between them. I do not want the remove the spaces between closing tag header 2 and opening tag of header ,as there is occurence of other characters.
I am aware that this can be done by looping through the string and using instr to identify the characters '<' and '>', but I would like to use it as a last resort only.
Can anyone suggest me a better way of doing it in a single go by manipulating the data?
Any help is really appreciated.
Regards,
Anil.

You can use the replace function. If you only expect one extra space, then:
scott@ORA92> select replace ('<header 1> <header 2> test </header 2> </header1>',
2 '><', '><')
3 from dual
4 /
REPLACE('<HEADER1><HEADER2>TEST</HEADER2></HEADER
<header 1> <header 2> test </header 2> </header1>
If you expect more extra spaces, then you will need to wrap another replace function around it for each space, for example the following will eliminate up to three spaces:
scott@ORA92> select replace (replace (replace ('<header 1> <header 2> test </header 2> </header1>',
2 '> <', '><'), '> <', '><'), '> <', '><')
3 from dual
4 /
REPLACE(REPLACE(REPLACE('<HEADER1><HEADER2>TEST
<header 1><header 2> test </header 2></header1>

How to remove all space into words non rank ?

I want remove any space more then one between words and make one space only between words :
example :
Before        FullName
            jon acer     sham
            jack     narr    sam
            haik   dosk kam
After         FullName
            jon acer sham
           jack narr sam
           haik dosk kam

Try the below:(Modified for actual data)
create table Tablename(Colname varchar(1000))
Insert into Tablename values
(' jon acer sham'),
(' jack narr sam'),
('haik dosk kam')
SELECT replace(
replace(
replace(
LTrim(RTrim(colname)),
' ',' |'),
'| ',''),
'|','') AS removed From Tablename
Drop table Tablename

Hi would anyone know how to remove malware or virus from an ihone 4.i would be prepared to do a system backup and restore factory settings through itunes but fear i might infect my computer.many thanks in advance.

please could somebody help.i think my iphone4 has malware or a virus and would really appreciate suggestions on how to remove.wy safari browser is frozen and thought about a system backup to itunes and restoring factory settings.worried this would also infect my computer?
thanks in advance.

If your iPhone is jailbroken then it doesn't have a virus.
Your problem is most likely something else and the chances of your computer catch it are nonexsistant.
Allan

How to remove duplicate POP messages in Mail under Mavericks

Hello
I'm having some significant problems with Apple Mail, and despite having researched widely, I haven't been able to find a solution yet. Here is my tale of woe...
My set up is that I use Mail with 5 separate accounts, downloading all messages using POP. I keep ALL my mail (even the trash) so that I have a permanent record of all conversations, going back more than 10 years - this is about 250,000 emails in around 250 subfolders. I'm running the latest version of Mavericks on a 2010 MBP. I have no intention of moving to IMAP - I need to keep a local archive of all my mail.
A few months ago I was having problems with Mail being very slow to load and search emails. I decided to rebuild the mailboxes, but afterwards discovered that thousands of messages in the inbox of one of my accounts (and some of the sub-folders) had disappeared. Once I realised I tried to go back to a recent Time Machine back up, but, for whatever reason, that part of the back up hadn't worked properly and I was unable to recover the previous status. I left it while I decided what to do, and had time to deal with it...
The last 2 years worth of emails on that account were still archived on gmail, so last week I decided to try redownloading the whole lot (something like 72,000 messages), and then planned to use one of the scripts I was aware of to remove the duplicates to the trash, and then remove any duplicates in the trash forever. That ought to mean I at least had an archive of the last two years of missing messages, even if I had no record of which ones had been flagged or replied to, etc.
The downloading took about 24 hours to complete, and I now have almost 70,000 messages in the inbox of that account. I also rebuilt all the folders again, which doesn't seem to have resulted in any further loss of messages as far as I can tell. However, I hadn't figured on two things:
1. Mail 'hides' duplicate messages, meaning that all of the messages I've downloaded are showing as unread, and I can't differentiate the ones I already had in my Inbox, and the new downloads. When I click on those apparently unread messages I can see if they have been replied to or forwarded, etc, but there's no obvious way for me to remove the ones I have already dealt with to the trash, without going through them all manually, which is clearly impossible.
2. The scripts I'd found for removing duplicates don't work. Andreas Amann's Remove Duplicates script doesn't work under Mavericks, and he has abandoned the project. I've also tried the remove-duplicate-messages.scpt made by Jolly Roger (http://jollyroger.kicks-***.org/software/), and while it *sometimes* works on individual subfolders on my Mac (but as far as I can tell removes the duplicate in that folder, rather than the newly downloaded version), mostly it doesn't work at all - it creates a 'Remove Duplicate Messages' folder on my desktop, a log inside it and a folder for removed messages, but nothing appears in the duplicates folder.
So, I'm left in a position where I have 70,000 apparently unread messages in my Inbox, a massively bloated Mail library (which has pretty much doubled in size, because of the 'hidden' messages), a slow and unresponsive Mail program. I've come to the conclusion that there must be some corrupted email somewhere, which probably caused the original email haemorrhage, and may still be causing the inability to remove duplicates. Mail is so slow as to be almost unuseable.
I figure I have a number of options:
1. I could live with the situation and just archive most of the Mail in my inbox, with the side effect that there will be a bunch of messages I have never replied to that are missed.
2. I could abandon the last week's efforts and revert to the version of Mail I was using a week ago, and then redownload the recent emails from my various accounts. That would still leave me without those thousands of emails I lost on my local machine.
3. I could find another way to deal with this. Can I get the remove duplicates script working? Should I revert to the version of Mail from a week ago, download ALL the messages again, but do it in a way that allows me to find the duplicates and remove them? Should I move to another email program altogether (which would presumably be massively disruptive to my work!)
Anyway, apologies for the essay length of this request, and thanks in advance for any help you may be able to offer!

hi Eric
thanks for the tip, but I don't think that solves my problem, which is that Mail apparently hides the duplicates, so they're still there, you just can't differentiate or remove them. I actually *need* the duplicates there so I know I've got everything, but then I need to be able to move the ones I know I've dealt with from my inbox to an archive/trash, and/or remove them completely so Mail isn't totally bloated

How to remove ghost space on Camera Roll under Usage. No photos on camera. 545MB shown on Camera Roll and 1.8MB on Photo Stream

Similar Messages

Maybe you are looking for