How to remove glare from eyewear with Elements 10

Hello, I'm new to the photoshop scene and just purchased the Elements 10.  I have one photo before sending it off from a huge photo shoot that needs glare repair from eyewear.  I have tried the clone tool and the little bandaid tool.  I'm doing something wrong.  It doesn't look right.  Also not understanding "layers".  Anyone out there have an answer?   Thank so much!

I only used the Spot Healing Brush:
Use the Selection Brush to make an accurate selection of the glare on the glass surface:
Use the Spot Healing Brush set to "Content aware", and set the size very small -- 10 pix.  This small size prevents too much of the surrounding area from being used as the fill.  Cover the entire selected area and release the mouse button:
When you remove the selection, you'll see some small areas that need touching up:
Use the Spot Healing Brush set to the smallest size covering the areas to clean them up:
The end result isn't too bad:
The glare is removed, while preserving the appearance of a shiny surface.
Added:
It wouldn't hurt to adjust for the skin tones, either.  I used Enhance...Adjust Color...Adjust Color for Skin Tone, and clicked on the boy's cheek to set the adjustment:
Ken
Message was edited by: photodrawken to add additional example

Similar Messages

  • How to remove application from Open With?

    Hi,
    I added by accident a wrong application to a file type in Finder. Now I would like to remove this entry from the files Open With list. How could this be done?
    Thanks and best regards
    Ralph

    Is it just that specific document you want to open with another application or is it all documents of the same format?
    #1 Hold down Ctrl key and choose Open with. Choose the application you want to open the document with. IF you want to always open this one document with another app then the pre-chosen one hold down both the CTRl and the Option key and choose application.
    #2 When you want a certain format of documents to open with another application, let us say all .rtf should open with Pages instead of Textedit, select one rtf document and use Command (apple) key and I to get the information window for this document. Somewhere in the middle you can choose with which app. to open this document with and right beneath there is another button that gives you the opportunity to open all document of the same format with the same application.
    Pardon my Swenglish, but I hope you are helped by this!

  • How to remove programs from "open with".

    Recently I installed VM Fusion on my new MBP with SnowLeopard. The annoying issue is that when I right click on a file from SL and select "open with" I get a long list with windows programs that I don't intend to use. Is there a way to remove those programs when I select "open with". Thank you
    Juan

    Juan2009 wrote:
    Recently I installed VM Fusion on my new MBP with SnowLeopard. The annoying issue is that when I right click on a file from SL and select "open with" I get a long list with windows programs that I don't intend to use. Is there a way to remove those programs when I select "open with".
    no, there isn't. this list is generated by the launch services database and you can't control it manually.
    Juan
    Message was edited by: V.K.

  • How to remove virus from words with friends?

    Recently when I play words with friends the app opens up my safari browser to the following address but it is blank. "Cdn3.doubleverify.com".  I downloaded all my apps from the App Store and I thought they were supposed to be "virus free".
    Can anyone help on how to delete the pop up virus from my iPad 3 since it is very annoying  
    There are many others with other iPad versions that have the same issue.

    Since the iPad is not suceptible to malware, the most it can do is be a little annoying.  Words with friends may be attempting to redirect to an offer for the full version or something similar and is going to this page whcih doesn't really work as far as I can tell.
    This is more an issue with their App, and possibly their Ad provider than anytihng else.
    There's really nothing to be done other than complain to words with firends.  Let them know on their own support forums so they may fix it.
    http://www.zyngaplayerforums.com/forumdisplay.php?787-Bugs-amp-Reporting&s=ae7da 1505f3f7d18763a6b5c3f912ac0

  • Remove glare from glasses

    How do I remove the glare from the flash in the glasses of photo subjects

    I know this is from the Photoshop Elements forum, not the Photoshop forum, but it still applies:
    How to remove glare from eyewear with Elements 10

  • HT1386 The first time I synced my iphone with my mac, I didn't realize that all of my photos from iphoto would transfer over to the phone.   Now, I need to remove some, as they are taking up too much space.  I cannot figure out how to remove them from the

    The first time I synced my iphone 4 with my mac, I didn't realize that all of my photos from the iphoto library would transfer over to the phone (more than 3,000).   Now, I need to remove some, as they are taking up too much space.  I cannot figure out how to remove them from the phone.  I tried to uncheck boxes and sync again, but I get a message that there is no room on the iphone.  I've read as many articles as I can find, but still cannot manage this.  Thanks for any help.

    Open itunes, connect iphone, select what you want, sync

  • I had a very bad experience with apple maps. It is not at all useful. How such application is developed by apple I dont undersatand. Pl help me how to remove it from my Iphone. Vijay from Hyderabad. India

    I had a very bad experience with apple maps. It is not at all useful. How such application is developed by apple I dont undersatand. Pl help me how to remove it from my Iphone. Vijay from Hyderabad. India

    Tell Apple.
    http://www.apple.com/feedback/iphone.html

  • I literally cannot figure out how to remove songs from my ipod touch 2nd gen. with itunes 11.  Please help.

    I can't figure out how to remove songs from my ipod with itunes 11.  And dragging songs to the ipod is rejected as well.  Please help.

    I want Steve Jobs Back!!! I'm seriously thinking of converting back to the older iTunes.We have a saying in my country,it goes,"If it's not broke,don't fix it!" Sometimes I think they do updates just to keep busy at their jobs or just to **** us off.I don't have time to learn new software everytime someone at apple gets a bright idea.At least they should think it through and test it well before giving it to us.Apple is not a small company,how come we got to work out all their bugs and problems? I may send them a bill! LOL

  • How to remove Unicode from XML file

    I get following error when unmarshal xml:
    [java] org.xml.sax.SAXParseException: An invalid XML character (Unicode: 0x15) was found in the element content of the document.
    Anyone know how to remove Unicode from xml file? Can I remove the unicode by rebuild the file?
    Thanks

    These sort of error usually occur when you're using a different character encoding to read the file than the one you wrote it with. Perhaps if you were to post the problem section of the file and/or the code that created it in the first place.

  • How to remove pics from my 3GS...???

    How to remove pics from my 3GS..???

    Photos taken with the phone can be deleted by selecting them and hitting the little wastebasket icon in the right bottom corner.
    Photos you did sync to your phone, can only be removed by deselecting them in the photo pane in iTunes, the following sync will remove them from the phone.

  • How to remove iPhone from a certain computer

    How to remove iPhone from a certain computer along with it's ID to allow another phone to use the comp soley.

    You do not need to do anything.
    Simply stop syncing the iphone to the computer and begin syncing the new iphone to the computer.

  • How to remove Seperator from check-in and profile check in pages

    How to remove Seperator from check-in and profile check in pages
    The seperator is included on the checkin pages, which is present in the std_page with name "std_namevalue_separator", this is called by td_document_checkin_fields and std_document_file_fields.
    Defination of include:
    <@dynamichtml std_namevalue_separator@>
    <$if not isUploadFieldScript$>
    <tr>
         <td width="<$captionFieldWidth$>"><hr /></td>
         <td width="<$captionEntryWidth$>"><hr /></td>
    </tr>
    <$endif$>
    <@end@>
    I have to remove the following include from some of the profile check in page.
    Please suggest if anyone have some idea, how to proceed.
    Thanks,
    Sumit

    791848 wrote:I have to remove the following include from some of the profile check in page.The key here is that you want to do this in some profiles, not all profiles or globally, if I'm reading this right.
    Without writing a component, you can put this code in the "side effects" box in the desired profile(s). This code removes the horizontal rule, and inserts a non breaking space in its place.
    <$setResourceInclude("std_namevalue_separator","<$if not isUploadFieldScript$>
    <tr>
    <td width=\"<$captionFieldWidth$>\"> </td>
    <td width=\"<$captionEntryWidth$>\"> </td>
    </tr>
    <$endif$>")$>YMMV. The non-breaking space may get stripped out in the forum.

  • How to remove text from .swf animation?

    how to remove text from .swf animation? Can no find this text
    in fla file. Flash 8.

    exactly what 'text' are you referring to? text that you typed
    on the Stage using the 'textTool'? simply select the text with the
    'arrowTool' and hit delete.
    If you are referring to a textField that you want to
    eliminate after a certain amount of time, within your animation
    sequence. first copy the text, create a new layer, paste the text
    in place, then where you want to have the text 'disappear' insert a
    'blank keyframe' at that point in the text layer.
    OR place the textfield within a MC and remove it with code.
    OR if the text is dynamic and you wish to use the position at a
    later time, pass a value of null or and empty string to the field
    at the point you wish. And there are other ways still. :) hope one
    of these works for you.

  • How to remove myself from/leave a team?

    Hi
    I'm using Visual Studio Online in my software development classes. The problem is that the "Accounts list" on my Visual Studio Online portal is crowded with projects from past years. A clean-up is needed.
    I found this solution (https://social.msdn.microsoft.com/Forums/vstudio/en-US/80057697-38d7-4161-8564-13c630943484/vs-tfs-online-how-to-remove-myself-from-a-team-?forum=TFService), but the problem in order to apply it is that I have no more contact with
    a lot of those students + most of their accounts are expired.
    How can I solve this?
    Thanks in advance!
    Evert
    PS: my apologies for any linguistic mistakes... English isn't my mother tongue.

    Hi Evert,
    Based on your description, seems you're the owner of the Visual Studio Online account. If you want to remove your account from the teams that expired, then you can delete the teams directly in team project administrative page of team web access.
    If you only want to remove your account from the teams, then you can click the team and remove your account in administrative page.
    Best regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • HT4859 kindle fire how to remove items from icloud

    kindle fire how to remove items from icloud

    Kindle Fire's don't work with iCloud, your question makes no sense.

Maybe you are looking for

  • Main Order TECO when Sub-Order is open

    Dear All, I just wanted to clarify if we can do TECO of Main Order when Sub-Order is open? If we can control this using any settings. Presently it is not allowing to do TECO of Main Order as long as Sub-Orders are open. Regards, MLN Prasad

  • Looking for the Holy Grail

    I'm wondering what you guys and girls are using as fast storage for uncompressed hd work. My company is looking for a solution that is reliable, but less expensive than an XRaid solution. It can be raid0, raid5, raid10, I don't care, I just want to k

  • Missing Adobe Reader and QuickOffice (Nokia 700)

    I recently had to do a "full factory reset" on my Nokia 700 but since then I seem to have lost both the Adobe Reader and QuickOffice. Both were working before the reset and I did a full Nokia Suite backup and restore after the reset. In an attempt to

  • Mac Pro wont boot to logon screen

    Help!! A couple of weeks ago, before upgrading to 10.5.7, my screen would freeze like a picture with the mouse cursor able to move but nothing would respond. I generally had to use the main power button at least 5 times before the display would show

  • Personal Lists in F4

    Hi All, I have a requirement define the personal lists for F4 serch helps and share them accross a sub-set of users. Is there a way of doing it? Cheers Deepal