How to remove GR blocked Stock

Dear experts,
We found there is some stock in GR.Blocked stock, which we can can not release into unrestricted now as we have no pending
103 documents,how to make the stock into unrestricted.please suggest me.
Thanks in advance.
Varun
Moderator message:
Locked. Reason: basic question.
Please search before asking.
Edited by: Csaba Szommer on Dec 23, 2011 6:48 AM

Hi,
Please refer the below links hope it may help you
http://help.sap.com/saphelp_46c/helpdata/en/a5/6334ef43a211d189410000e829fbbd/content.htm
diffrence between GR Blocked stock and Blocked stock
Did you check MMBE to see the stock...
whether its showing there...
If its showing there...
Remove the stock from GR blocked stock...either via referencing the material document through which you post it to GR blk stock or via referencing the PO...
and release it to stock or consumption...
and then check ....
You can do above from MIGO itself...
Regards,
Udaya.

Similar Messages

How to remove black "blocked plug-in" window that opens with iPhoto. It covers iPhoto and everything under it. I've right and left clicked the black window, restarting the computer, shutting down the computer, but the window always appears when I ope

How to remove black "blocked plug-in" window that opens with iPhoto. It covers iPhoto and everything under it. I've right and left clicked the black window, restarting the computer, shutting down the computer, but the window always appears when I open iPhoto and it will not move or go away. It stays on my screen (covering my desktop icons) even after I quit iPhoto. How can I get it off my screen?

Which version if iPhoto and MacOS X do you have?
Do you have any iPhoto plug-ins installed?
Open the folder /Library/Application Support/iPhoto/Plugins/
To navigate to that folder, open the folder "Library" directly on your Macintosh HD, then inside the Library folder go to Application Support, then iPhoto. Is there anything installed?

How to remove black "blocked plug-in" window that opens with iPhoto and covers everything under it?

How to remove black "blocked plug-in" window that opens with iPhoto. It covers iPhoto and everything under it. I've right and left clicked the black window, restarting the computer, shutting down the computer, but the window always appears when I open iPhoto and it will not move or go away. It stays on my screen (covering my desktop icons) even after I quit iPhoto. How can I get it off my screen?

Which version if iPhoto and MacOS X do you have?
Do you have any iPhoto plug-ins installed?
Open the folder /Library/Application Support/iPhoto/Plugins/
To navigate to that folder, open the folder "Library" directly on your Macintosh HD, then inside the Library folder go to Application Support, then iPhoto. Is there anything installed?

How to remove payment block for AP invoices which has been cleared

How to remove payment block for AP invoices which has been cleared
Thanks
Chiru

Hi,
Thanks for immediate response in fb02 is in deable mode
mrbr unable to change
please provide to to remove blocking code i will assign points
Thnaks
Chiru

How to migrate GR block stock (103) and its PO from SAP to SAP system

Hello All,
We are migrating from one SAP system to another . Our approach is to only migrate open POs and upload stock with initial entry. This works for POs with 101 movement type. However POs with Goods in transit - which usuallly follow the 103-105 cycle are causing an issue.
How would I migrate GR blocked stock i.e. if a PO has had only 103 mvt against it.
Thanks in advance.

Hi,
   If the invoice is not entered / paid, then the old PO should not be processed for any subsequent process and you have to do all the subsequent process based on the new PO in the new system. You may block the old PO item to avoid any mistake.
   If invoice is already entered and pending for payment, please check with your accounts department regarding the approach, since it will be critical from audit point of view. You may either cancel the invoice in the old system and create the same in the new; or continue with the payment in the old system and transfer the correct material valuation price from old system to new system and create free of cost PO for these items (only for already paid items) in the new system (since invoice is already paid).
   If you need the GR blocked stock, you have to create the transaction data!!. You may use any of the data upload tool to achieve the same!
Regards,
AKPT

How to move quality blocked stock to unrestricted

During Quality inspection I have put 2 nos of the items in blocked stock and done no further processing. Do i need to create notification and then transfer the stock to unrestricted.
Kindly guide with the T-code
Thanks

how r u sure that the blocked stock which is showing in mmbe is that stock which u have placed in blocked stock through the inspection lot .
i had also faced the same error some time back.
after analysis i found out that the stock which i was thinking was placed to blocked stock thru an inspection lot wasnot the amount showing in mmbe.
what u can do is proceed all the inspection lot in QM against the material code.
regards,
indranil

How To remove billing Block collectively

Dear All,
We are having process of periodic billing in contracts
Kindly help me in removing the billing block of billing plan collectively of supose 10 contracts at a time of same period.
Thanxs
Vijay

Dear Sir,
This is not working I needed to remove billing block of billing plan that also collectivly . By V.23 header data billing block can be removed collectivly
Thanks
Vijay

How to remove the open stock

Dearl all,
I have created PO with QTy 50000 KL and GR has been done for 3000 KL now in MMBE open stock parcular material is showing 2000 KL now i dont want to receive 2000 KL qty, i tried to delete the line item in PO its showing error Msg qty2000 smaller than qty delivered 3000 and i blocked the line item but showing in the open stock (inMMBE) gow to remove it
please advice me
points will be rewarded
Regards
venu gopal

Hi
If you donot want to receive the Further 2000 KL, In the PO item, change the PO order qty to 3000 KL & flag the delivery completed indicator in the PO item
Thanks & Regards
Kishore

How to remove billing block for rejected order

Hi gurus,
There is a question about billing block that needs ur help..
A sales order's credit status in header level is "Not approved" and thus it's blocked for billing. We've rejected this sales order in all items, but this sales order is still showing in V23-Billing block report, how can we remove it from that report without changing Credit status?
Or we have to update the credit status and then reject it again?
Looking for your advice and thanks in advance.

First tell me have you checked the credit status of that particular customer.
Have you rejected all the item in sales order of the same order in which you have set the credit limit.
then in that case you will have to increase the credit limit and then reject it.
I hope it completed your work
please let me know is it a proper solution.

How to remove storage bin stock

our current client wants to empty out stock from storage bin. In inventory management there is no stock exist in storage location, but it is there in storage bin.
Pls suggest ASAP

Hey,
Have a look at LX23 .. might be able to help ?!
thanks,
A
Short text
Stock Comparison Inventory Management / Warehouse Management
Description
Using this report you can generate an inventory comparison between the IM System (Inventory Management) and the WM System (Warehouse Management).
On the selection screen, you can limit the area for comparison by entering the plant / storage location, plant / warehouse number or only the warehouse number.
In addition to specifying the area, you can also determine the extent of information to be issued. Here you have three options:
1. "With bin inventory"
In addition to generating the corresponding stock figures, you can also have a list of the corresponding WM bin quantities included.
2. "All data on material"
Even if only one difference occurs in one of the listed combinatations of material / batch / special stock indicator / supplier, all material combinations are listed. This can be very helpful when searching for errors.
3. "Clear differences"
If you mark this field, the system will generate a batch input session. By starting the batch input session, the differences to be cleared are removed in the IM system. Negative WM stock figures and stock differences in returns will not be cleared.
If you want to have a batch input file generated for the purpose of clearing the differences, it is important, for consistency reasons, that the materials in the respective warehouse are blocked in order that postings affecting stock figures can be prevented.
CAREFUL: If you generate this session, all the material stocks belonging to the respective warehouse number are blocked completely, that is, for the duration of the program, no postings affecting the stock in the warehouse will be possible!
Prerequisites
The comparison is also possible for warehosue numbers managed on a decentralized basis.
Output
You receive a list with various materials. The list contains the following information, for example:
The first line contains the plant, storage location, warehouse number, material number, total stock in inventory management, total stock in the warehouse, and the difference between the stocks.
The following line contains the first combination of batch / special stock indicator / supplier (or sales document and item number for sales order stock) and stock category (Q,R,S, ), the stock figures in Inventory Management, in Warehouse Management, and the difference.
If a batch input session is to be generated, the list contains a note in the log as to whether or not a session has been generated or behind the pushbutton "non-postable stocks", which materials could not be cleared because of negative stock figures or because they belong to returns stock.

How to remove the negative stocks in transaction code MB51

hi experts,
i have this problem, when i display this material 12345 in MB51 there is a movement type 601 created in it. now when we are processing a customized program the report that was displayed does not match with the actual stocks because of this negative qty. the material document was created 3 years ago.. please help what is the procedure that i will do in order to correct the report and remove the -value in MB51.
thank you very muhc in advance.

Dear Ysabella Bautista
Can you please let me know whether MB51 shows the correct quantity when compared to physical stock ?? Why I am asking is that you had indicated that in customized programme, the report was showing wrongly which may be due to some wrong coding problem.
Also on your comments "remove the -value in MB51", please note that since this TCode is a standard one, 100% guarantee that the system shows ONLY correct value. This is my opinion !!!!!!
thanks
G. Lakshmipathi

How to remove a block of data in memory?

hello:
there is a block of data in memory, now i should add 4 bytes in them , so i should remove some data behind, i don't know what function i should use?
i think remove some data from one place to another is copy data from one place to another , is that ok?
Best regards!
future

I have some records in the internal table t_int1. I want to retrieve some set records from that table and put them all in some other table, based on a single field which is not a key. Can i use READ statement to achieve this.
Could you please let me know any simple way of doin this.
Answer :
data:
itab2 like standard table of t_int1 with header line.
Loop at t_int1.
read table t_int1 with index 1.
check ur condition----
check each line and insert it ---work out the syntax for this
IF t_int1-xyz = data1
append line of t_int1 to itab2. or try insert
cnt = cnt + 1 -
u will get no. of records added to next itab.
else.
cnt1 = cnt1 + 1 -
u will get no. of records not added to next itab.
endif.
end loop.

How to remove block from inspection lot

I would like to know how to remove a block from an inspection lot

Clifton,
Execute transaction QA02, input your inspection lot number and enter. In the change Inspection Lot: Origin screen, from Menu bar Inspection Lot-->Functions->Unblock Lot and now save the lot.
Regards,
Prasobh

Remove payment block indicator in customer document

hi,
how to remove payment block indicator in customer bill. Like in vendor we are useing MRBR. Same way to customer.
Can any one give the suggestion on this.
gvoind.

Helloo govind.
You can relaese the document to accounting which are block by payment block through T CODE VFX3.
I think this will solve your problem
Regards
ravi

QA11 Blocked stock field as uneditable

Hi,
Can any one tell me how to disable the blocked stock field ( In inspection lot tab of QA11 transaction )
for input based on PO item category ? Is there any user exit or Badi for that ?
Regards,
Krishnam Raju
Edited by: krishnam raju on Apr 10, 2009 5:50 PM

i guess, in ur case, user exit or badi is right solution. I guess, u know, How to find available user exit for a transaction......for search BADIs, follow below method,
This is the way to find BADI in transaction
1. Go to the TCode SE24 and enter CL_EXITHANDLER as object type.
2. In 'Display' mode, go to 'Methods' tab.
3. Double click the method 'Get Instance' to display it source code.
4. Set a breakpoint on 'CALL METHOD cl_exithandler=>get_class_name_by_interface'.
5. Then run your transaction.
6. The screen will stop at this method.
7. Check the value of parameter 'EXIT_NAME'. It will show you the BADI
for that transaction.
actually, the above piece is copied from other thread.
after finding a approapriate user-exit/badi, u can code like
if PO_item_category = item_category_make_disable_field
Loop at screen
if......screen = XXX
screen-input = '0'
modify screen
endif
endloop.
endif
these days i dont hv sap access, so, pls. just take my code snippet as an idea.
thanq
Edited by: SAP ABAPer on Apr 11, 2009 4:46 AM

How to remove GR blocked Stock

Similar Messages

Maybe you are looking for