How to remove HP ink from hands and fabrics
How to remove HP ink from hands and fabrics
Please note that the ink used by HP is a water based ink that will clean easily. Here’s how to remove ink stains from hands and fabric.
NOTE: IMMEDIATELY rinse the stained area with COLD water, and then follow the appropriate instructions.
To remove ink stains from hands:
Wash hands with an abrasive (gritty) soap. Note: It may take several washings.
To remove ink stains from white fabrics:
If ink from an HP Inkjet print cartridge spills on white fabric, use chlorine bleach and cold water to remove the stain, but act quickly.
CAUTION: Use only COLD water. Warm or hot water will "set" the color into the fabric.
To remove ink stains from colored fabrics:
Use sudsy ammonia—a dilute mixture of detergent and ammonia—and cold water. Act quickly and test on an inconspicuous area first.
CAUTION: Use cold water. Warm or hot water will "set" the color into the fabric.
WARNING: Do not mix ammonia and chlorine bleach; this creates a toxic gas!
Although I work for HP, my post's and replies are my own opinion. I am not an official HP spokesperson.
****Please click the Kudos Thumbs up if you would like to say thanks****
****Please mark Accept As Solution if it solves your problem****
This should be a sticky
Although I work for HP, my post's and replies are my own opinion. I am not an official HP spokesperson.
****Please click the Kudos Thumbs up if you would like to say thanks****
****Please mark Accept As Solution if it solves your problem****
Similar Messages
-
WebDynpro Java: how to remove blank element from Table and Dropdown.
Hi Folks
In a webdynpro application,
I created a table and witten the below code to populate the table
IPrivateDummyView.IFirst_TableElement First_Table_Element = null;
First_Table_Element = wdContext.nodeFirst_Table().createFirst_TableElement();
First_Table_Element.setF_Value("One");
wdContext.nodeFirst_Table().addElement(First_Table_Element);
First_Table_Element = wdContext.nodeFirst_Table().createFirst_TableElement();
First_Table_Element.setF_Value("2");
wdContext.nodeFirst_Table().addElement(First_Table_Element);
As per the code, i got 2 row in the table.
But , i have one Empty row on top of the table , how to get ride of this.
i find the same problem happening with dropdown too, where i used DDBI, i populated a the content as mention, but i initial 2 row as blank and then i have my own elements ,as per my code.>
> how to remove blank element from Table and Dropdown
>
Change selection property of related node to from 0..1 to 1..1 (mandatory)
Re: DropdownByIndex and empty line (Thread: DropdownByIndex and empty line )
Re: Can the empty selection be removed from element dropdownbykey(Thread: Can the empty selection be removed from element dropdownbykey )
Edited by: Anagha Jawalekar on Nov 18, 2008 10:28 PM -
How to remove the characters from first and last position of a string?
Hi all,
I am creating an application where i am using vb script to export the data to excel.
In the excel sheet most of the values are entered with double " quotes.
so the entry looks like ""http://www.sap.com"".
Notice that it is starting with "" and not " . so the vb takes it as a line feed and shows an error .
It will be great if anybody can tell me how to remove these set of quotes ,so that the value should come as "http://www.sap.com" . A sample code wil be of great help.
Thanks in advance,
mahima.Hi,
To modify you excel you have 2 options, 1) you can filter them in excel itself by using filter ...etc in excel itself. or 2) you can do it by using ABAP code.
Below code may help you.
Get the data from Excel to Internal table using FM :
call function 'ALSM_EXCEL_TO_INTERNAL_TABLE'
exporting
filename = 'c:\temp\test.xls'
i_begin_col = 1
i_begin_row = 1
i_end_col = w_values
i_end_row = 10
tables
intern = t_alsmex_tabline
exceptions
inconsistent_parameters = 1
upload_ole = 2
others = 3.
Now replace all unwanted "" in internal table with space.
replace all occurrences of '""' in itab-field with ' '.
Again you can export to Excel using
call function 'GUI_DOWNLOAD'
exporting
filename = lv_file
filetype = 'DAT'
append = ' '
write_field_separator = 'X'
tables
data_tab = itab. -
Hello!
Here's the question with explaniation: How can i format the USB or Drive by clicking a button what's meant for it?
and the second question what's also in vb.net: How can i remove all files from folder ?
Here's the Look of program: *
Using the PC button, it will delete the free space of the PC, do you guys/girls know where it's location?Example Code:
Imports System.Runtime.InteropServices
Imports System.IO
Public Class Form1
Dim CBoxDrives As New ComboBox
WithEvents FButton As New Button
<DllImport("shell32.dll")> _
Private Shared Function SHFormatDrive(ByVal hwnd As IntPtr, ByVal drive As UInteger, _
ByVal fmtID As UInteger, ByVal options As UInteger) As ULong
End Function
Private Enum SHFormatFlags As Integer
SHFMT_ID_DEFAULT = &HFFFF
SHFMT_OPT_FULL = &H1
SHFMT_OPT_SYSONLY = &H2
SHFMT_ERROR = &HFFFFFFFF
SHFMT_CANCEL = &HFFFFFFFE
SHFMT_NOFORMAT = &HFFFFFFD
SHFD_FORMAT_FULL = 0 ' full format
SHFD_FORMAT_QUICK = 1 ' quick format
End Enum
Private Sub FButton_Click_1(sender As System.Object, e As System.EventArgs) Handles FButton.Click
If CBoxDrives.Text = "" Then
MsgBox("No Drive Selected")
Exit Sub
End If
Dim Iresult As ULong = SHFormatDrive(CType(Me.Handle.ToInt32, IntPtr), CUInt(Asc(CBoxDrives.Text.Substring(0, 1)) - Asc("A")), CUInt(SHFormatFlags.SHFMT_ID_DEFAULT), 1)
End Sub
Private Sub Form1_Load(sender As System.Object, e As System.EventArgs) Handles MyBase.Load
Me.Size = New Size(200, 100)
With FButton
.Size = New Size(50, 25)
.Location = New Point(5, 5)
.Text = "Format"
End With
Me.Controls.Add(FButton)
With CBoxDrives
.Size = New Size(50, 25)
.Location = New Point(75, 5)
.DropDownStyle = ComboBoxStyle.DropDown
End With
Me.Controls.Add(CBoxDrives)
Dim DrivesFound As Integer = 0
Dim allDrives() As DriveInfo = DriveInfo.GetDrives()
Dim d As DriveInfo
For Each d In allDrives
If ((d.DriveType = DriveType.Fixed) Or (d.DriveType = DriveType.Removable)) AndAlso Environment.GetEnvironmentVariable("SYSTEMROOT").StartsWith(d.Name) = False Then
CBoxDrives.Items.Add(d.Name)
DrivesFound += 1
End If
Next
CBoxDrives.SelectedIndex = DrivesFound - 1
End Sub
End Class -
How to remove a movie from iCloud and iMovie Theater?
So I figured out how to publish a movie from iMovie 10 to the Apple TV channel iMovie Theater> by using the iCloud button. But now once it's there how can I remove it? Or is this a new way for Apple to get me to purchase more space in iCloud?
There is a another solution as in my case. I was tired of all my lousy movies and so I deleted my entire iMove libary in my user folder. That "stranded" some movies in the Theater cloud which showed up on my Apple TV.
What I did was go to System Preferences and chose "iCloud". Then under iCloud Storage I clicked "Manage...". Here you can go under Documents, etc and delete what is "backed up" in the cloud. -
How to remove Java Applications from "Add and Remove Programs" list?
I have deployed my Java applications (both JWS and Applet) via JNLP with allow-offline option enabled and without installer-desc option specified.
My questions are:
1. An entry is added to the Add and Remove Programs list after launching the application via JNLP. Is it due to the specification of JNLP or JWS? Is there anyway to prevent this behavior?
2. I removed my application by clearing the cache via Java Control Panel but the entry for the application is still listed in Add and Remove Programs. How can I remove the entry in the Add and Remove Programs?
I have tried following methods but neither works:
1.Go to Add and Remove Programs, and click [remove] button to the right of my application.
*Warning message like 'Application cannot be uninstalled completely' is thrown.
2.Follow instructions listed @ [Microsoft Online Support site|http://support.microsoft.com/kb/314481/en-us] to remove my application manually via Windows registry.
*Couldn't find appropriate registry entry to delete.
Thanks in advance!Hi, guys!
This issue has been officially approved as a new bug (Bug Id: 6946221) for the JDK 1.6_20(might include any release below) release.
It will take a couple of days for it to be shown up in the external Bug database. However, once it becomes available for viewing on external Bug database.I would like to encourage your valuable participation to vote on this bug to get it fixed ASAP by the SUN developer teams.
Java Bug Database @
[http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=6946221|http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=6946221]
Voting for the bug @
[http://bugs.sun.com/bugdatabase/addVote.do?bug_id=6946221|http://bugs.sun.com/bugdatabase/addVote.do?bug_id=6946221]
Thank you for your cooperation!
Edited by: Jay-K on Apr 23, 2010 12:14 AM -
How to remove horizontal lines from black and white prints in LR 5?
hello, i have LR 5 on my iMac running Mavericks OS...i am very happy with it except for when i print from the print module when the pictures are black and white...color seems to be fine...but, the problem is that there are vertical lines space evenly apart running down the pictures...generally if it is with sky as a background...but the lines do run through the main subject as well...any suggestions...thanks in advance...
thanks for your reply...my printer is an HP 7520 Photosmart...i have done all of the diagnostics on the printer and everything seems to be fine...it doesn't do the line thing when the pictures are in color...or, if in b/w, in a closeup...
-
iPod 5 was not adding new playlists when synching (plenty of space remained in memory for it). This happened around the time of the new update. I removed all music from the iPod and when I went to resync the selected playlists, my OTHER portion of memory jumped up to 34GB and now there is not enough space on the iPod to put all my music back on.
I've checked the usage of all the apps and photos, etc, it is pretty clear this is because of the music portion only.
Is there anyway of removing this information? Without doing a restore? It is not jailbroken either.An "other" larger than about 1 1/2 GB indicates corrupted files.
What is the Other on my iPhone and How to Remove It
What is "Other" and What Can I Do About It?
Next, usually restoring from backup eliminated the corrupted files. However, sometimes restoring to factory settings/new iPod is required.
To restore from backup see:
iOS: How to back up
To restore to factory settings/new iPod see:
iTunes: Restoring iOS software -
How to remove a click from a sequence file mp4 or mp3, and make it only sequence left and right in GarageBand?
"adrianTNT" <[email protected]> wrote in message
news:e6aitv$hkm$[email protected]..
>
quote:
Originally posted by:
kglad
> you're welcome. with your solution loading another mp3,
are you sure it stops
> the download of the first mp3?
> Yes, it seems to work fine, it loads another sound in
same sound (my_sound)
> and it seems to replace loaded progress with the empty
sound I gave and stops
> previous loading.
> I look at traffic icons on task bar and I see that there
is no network traffic
> after I click "stop" before this I could see continuous
traffic while sound was
> loading in background.
Yeah, I remember someone posted that solution a long time
ago. It seems if you load a file with the same name the cache
doesn't
know any better and adjusts the download size to the smaller
one. Maybe it's a good way to do it! Could it be a way to remove an
mp3 from someone's cache after it plays? hmmmm Will have to
do more testing.
tralfaz -
Any suggestions on how to remove an "aura" from around a selection in an image? I shoot pictures at rodeos. To make the rider stand out, I create a mask around the rider and then blur the background with Gaussian Blur. This results in a noticeable blur around the outside of the selection. I have tried using Feathering as well as other Refine Edge Tools. The only thing that works is to go around the edge with the Clone Tool. This is time consuming and not totally successful. So, my two big questions are: (1) Is there a better (simpler) way to avoid the aura? and (2) If not, is there a way to remove the aura that is simpler??
Thanks in Advance,
Art SchwartzSorry, what with the long title I had neglected the body of the message and your statement
The only thing that works is to go around the edge with the Clone Tool. This is time consuming and not totally successful.
seems to answer my first question.
Did you do that before or after blurring?
Have you alternatively tried using Content Aware Fill? -
How to remove available downloads from the list
how to remove available downloads from the list without it resuming when i open itunes or check for available downloads?
There is not a way to remove them from the list. Just let them download, and then delete them from your library when they are done.
-
How to remove "open dns" from imac
how to remove "open dns" from imac
Unlock the Network preference pane, if necessary, by clicking the lock icon in the lower left corner and entering your password. Cllck Advanced, open the DNS tab, and delete the server addresses. Click OK and then Apply.
-
How to remove SD Card from the Card Reader slot - Satellite A100?
Hi,
Is there anyone to help me? I inserted a 64 MB SD card in the card reader slot of my Toshiba A100 model. It's the first time i have inserted the card. The card is inside the slot. I can not take it out! I don't have any idea how to remove the card from the card reader slot. I can see the contents of my SD card, can open the files too. But how to remove it out from the slot. Please help me giving your idea to remove the card out from the slot.
ArjunHi
In my knowledge the SD card slot doesnt has a any additional helps like the PCMCIA slot to remove the card.
You have to remove it simply. Try to grab the card and move it out. You can try to use the pair of tweezers. Maybe it helps -
How to remove esclamation mark from itunes
how to remove esclamation mark from itunes???
See these...
-> One computer using multiple iTunes Store authorizations
-> About iTunes Store authorization and deauthorization -
How to remove a node from nlb at runtime?
hello,
i need to temporally exclude a node from an nlb.
May happen that a server is up and working but the web application i'm balancing is out of sinch with the same application in the others nodes.
Eg. some static variables are not the same of the same static variables of other nodes, because of a timeout, a write error and so on but the server is still working.
in this case i need to stop the server from nlb because the information in the web application is not in sinch with other nodes.
I need to prevent users from being serverd from this out to date server, untill it will became updated, but i need to do this programmatically
how can i do it?"DuoMi" <[email protected]> wrote in message
news:gnojbf$2sg$[email protected]..
> How to remove a node from XMLList
>
> I want remove the first node from XMLList
>
>
> and how to get the combobox all values string:
>
> <data>
> <value>2</value>
> </date>
> <data>
> <value>5</value>
> </date>
> <data>
> <value>8</value>
> </date>
>
> I need a string whit value "2,5,8"
>
> thkan you.~
I think something like
comboBox.dataProvider..value.toString()
will work.
Maybe you are looking for
-
Create a New Contact in the same window
Hi Folks, I want to create a New Contact from the Quick Create Link and want it function in the same way that the "New" / "Copy" Button functions Currently: Quick Create Link opens a Contact in a New Window. Requirement: Contact should open in the sa
-
Hi experts, I got an issue regarding po's output message related one here is issue : In my production system some messages(NEU) type are deleted manually (in me22n). next day to the same PO's NEU type message is sent to vendor with out physical trig
-
I can't get the Vanity Fair App to download to my iPhone 4S
I am print subscriber to VF and opened the app to download to iPhone. The app is displayed in my iTunes online apps but won't download to the phone. I have to go thru my Apps and manually sign in fresh each time. I updated, closed and reopened pho
-
How to manage sessions(IEnterpriseSession) across multiple users?
Assuming that we are going to have only one user for our web-app to access the BO-ReportServer. Are we supposed to fetch the IEnterpriseSession, using the following code for every user who is trying to access the WEBI report using BO-SDK from a web a
-
mi itouch reproduce videos musicales pero sin sonido,,como lo soluciono