How to remove HTML comments at the end of the portal page

Hi,
I've noticed that even if you turn off performance comments, some code in the portal UI still sticks this:

at the bottom of every page.
Does anyone know how I can suppress these comments?
Thanks,
Chris Bucchere | bdg | [email protected] | www.bdg-online.com

Are you using GB 10.0.2 as well?
I am using both - GarageBand 10.0.2 and GarageBand '11.
And if I deselect all regions, File - Add Region to loop library is of course greyed out. Is it possible to save multiple tracks as a loop?
No.
Yep, I've deselected all regions. Still no luck.
My answer above was in answer to your "This time GB felt I only needed the first 4 measures of the song, even though I defined an entire Region over the length of the song and selected everything with Ctrl-A..."
You should be able to export the complete song, if you deselect all regions, and select all of the song using the cycle region with "Export Cycle region only" enabled, or with "Export Cycle region only" disabled, nothing selected, and the end-of-song marker correctly set.
However, this will not get rid of the trailing empty bars.
Reimport the bounced song to a new Ringtone project and trim it and save it as a tone, or to a regular project and add it to the Loop Library.
Find the AIFF file of the loop in the Loop library - it will be installed in your User Library in your Home folder
~/Library/Audio/Apple Loops/User Loops/SingleFiles/

Similar Messages

How to remove save, cancel option when end user runs the workbook in Portal

Hi,
how to remove save, cancel option when end user runs the workbook and make some small changes like using page items or increasing rows and columns
I already made 2 changes
1) I removed the option in Oracle Enterprise Manager under discoverer viewer of saving
2) I also removed the option of Allow saving changes made in Viewer when adding workbook to portal
But still the end user gets options of saving when made small changes to workbook like increasing rows and columns
Is their any place, I need to make changes?
Thanks in Advance
Rowdheer

Don't use JSP to serve a binary file. It almost implies the use of awful scriptlets and the invocation of both the response writer and the response outputstream which would only lead to IllegalStateException headaches in the server logs.
Use a Servlet instead. Specify the file name as request parameter and let the servlet read the file and write it to the outputstream of the response.

How do I remove the (-signed) which Adobe adds to the end of the document name after having signed it?

Hi there,
How do I remove the (-signed) which Adobe adds to the end of the document name after having signed it?
It is not convenient to remove it every time I sign a document. So, is there a way to turn this off?
Thank you

I think you cannot, because for many people it is so important to keep the unsigned document, and most do not realise this until it is too late.

How to remove the blank lines at the end of the JTextArea .

Hi,
I need to remove the blank lines in the JTextArea at the end. Suppose i am giving 'A' in the first line and press the enter key two times, after i am giving the 'B' in the third line and press enter key for two times. I need to remove, the last two lines of JTextAreae, . How i can remove these lines?

String#trim() removes all whitespace from both ends of the String.
The requirement was to remove line breaks from the end of the String only.
String#replaceAll with a suitable regex would do the trick. Untested regex for this:text.replaceAll("[\\n\\r]+$", "")db

How to remove the divider at the end of application panel page button bar

I want to remove the divider at the end of the application panel's page button bar. I dont see a handle in the propery inspector which can be set or unset to remove this divider.
I am thinking more in lines of something like a "SecondaryToolbarRendered =false" kind of thing to remove this divider.
Any suggestions?

Applications Panel is an internal Fusion Apps component. Please post this in Oracle's intrnal ADF Frontnd Forum at myforums.oracle.com.
We , the world outside Oracle are oblivious to this component :)

How do I remove bookmarks when the star at the end of the bar is white, not blue?

I am trying to clean out my bookmarks and certain ones will not go away. The bookmarks that continue to appear even after I have clicked "remove bookmark" are those that do not have a blue star at the end of the website address line. The star at the end of these addresses is visible, but is white (or unfilled), not blue like the ones that have been deleted.

A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
*https://support.mozilla.org/kb/Bookmarks+not+saved#w_fix-the-bookmarks-file
*http://kb.mozillazine.org/Bookmarks_not_saved

How to Add barcodes at the end of a 3 page form to capture data

I am working on a multiple pages form that contain a paper form barcode I decide to put all paper form barcodes in the last page. How do I get the data fields to be assigned to different barcodes at the end of the page.
How do I remove the red x on the barcode.
I calculate that my form will have approx 2000-3000 chacracters how many barcodes will I need to put
I am using Designer 7
George Ward

With Designer 7.x you will have to wrap each of the data sets on each of the pages in a subform and then with each of your barcodes, select the subform that you would like to collect data from.
Your life would be made much easier if you upgraded to Designer 8.x as you could create "collections" and then associate those collections to each of your barcodes.
With 3,000 characters of data you would more than likely be looking at 3 separate barcodes. The capacity does depend on the type of data your capturing but you should be covered with 3.
Lee

Automatically add a current date at the end of the comments

Hi,
I have a form on a table with 5 fields... on one the field I am asking my users to enter comments...
I am looking for a functionality to automatically add a current date at the end of the comments, only when they are updated or newly filled in...
Please advice how can I do it... I am anticipating some sort of a trigger on column (when the data is modified)...
Thanks

automatically add a current date at the end of the comments, only when they are updated or newly filled inDo you want to add the date to the page item itself and hence show it to the end user as and when its changed, thn
Assuming comments item is named '*P1_COMMENTS* , add the following to the "execute on load"
$('P1_COMMENTS').change( function(){
var d = new Date();
$s('P1_COMMENTS', $v('P1_COMMENTS')+ d.toUTCString() );
});If its to be done only when updating ie in the PLSQL block
UPDATE <table name>
SET <comments _column> = ( SELECT DECODE( NVL(<comments _column>,'')
                                                                      ,NVL(:P1_COMMENTS,'')
                                                                      ,<comments _column>
                                                                      ,:P1_COMMENTS||TOCHAR(SYSDATE,'DD-MON-YYY')
                                              FROM DUAL
WHERE <condition>

How to find out which objects are at the end of the datafiles

My Scenario is having a tablespace of 65G but the data is 5G and that is at the end of datafile for that we are not able to resize the datafile our though is to find out what are the objects at that end of datafiles and will either alter move <owner.tablename> move or alter index <owner.index> rebuld online.
For that how to find out which objects are at the end of the datafiles.

>
My Scenario is having a tablespace of 65G but the data is 5G and that is at the end of datafile for that we are not able to resize the datafile our though is to find out what are the objects at that end of datafiles and will either alter move <owner.tablename> move or alter index <owner.index> rebuld online.
For that how to find out which objects are at the end of the datafiles.
>
You may want to copy this and add it to your toolkit
See 'What's at the End of the File?' in this Tom Kyte article from the Sept 2004 Oracle Magazine
http://www.oracle.com/technetwork/issue-archive/o54asktom-086284.html
And this AskTom blog shows you how to generate a script containing ALTER statements toresize your datafiles to the smallest possible. You can 'pick and choose' from the ALTER statements to do what you want.
Then of course, you can use techniques from this article by Oracle ACE, and noted author, Jonathan Lewis
http://jonathanlewis.wordpress.com/2010/02/06/shrink-tablespace/

Remove Line feed at the end of the file while using file adapter

Hi All,
I have a requirement. We are sending a file from SAP to FTP using file adapter. we are successful in sending the file to FTP but at the end of the file a extra blank line is created .
Can anyone please suggest how to remove the extra line feed at the end of the file.
Thanks and Regards,
LRK.

check this:
http://help.sap.com/saphelp_nw04/helpdata/en/2c/181077dd7d6b4ea6a8029b20bf7e55/frameset.htm
To define an additional string as a separator after the last column in a row, specify it here. The system skips this string when it processes the last column (otherwise the system would treat it as part of the last column).
Also there are solved threads which deal with same problem....you can even check them out...
regards,
Abhishek.

How can I make a fade out effect at the end of the song in garageband for iPad?

I want to made this effect but honestly I have no idea about what I have to do. u.u Please help.

ClaudioWalrus wrote:
How can I make a fade out effect at the end of the song in garageband for iPad?
GB for iPad doesn't have volume automation, you'd need to import the project into GB on a Mac to create the fade with a volume curve.
as an alt, finish your song and export the audio file, then import the audio file in an audio editor and create a volume fade with that:
http://www.bulletsandbones.com/GB/GBFAQ.html#audioeditors
(Let the page FULLY load. The link to your answer is at the top of your screen)

Utl_file.utl_raw adds a line feed at the end of the line. How to avoid it.

utl_file.utl_raw adds a line feed at the end of the line. I have to send some binary files to my vendor and they do not want a line feed at the end of the line.
When I execute the sample program below, it creates a file with a line feed(chr(10)) at the end of the line. When I do dump in hexa, it shows a character x0A
How to avoid the line feed at end of line?
We are using Oracle 9i on unix platform.
declare
l_output           utl_file.file_type;
v_raw      raw(32767);
v_trlr_rec_code      VARCHAR2(2);
v_trlr_evnt_title      VARCHAR2(6);
begin
l_output := utl_file.fopen( 'RM_MHE_IN_DIR', 'abc.dat', 'w', 14 );
v_trlr_rec_code      := '99';
v_trlr_evnt_title      := 'STARTD';
v_raw := HEXTORAW(v_trlr_rec_code) || utl_raw.cast_to_raw(v_trlr_evnt_title);
utl_file.put_raw( l_output, v_raw );
utl_file.fflush( l_output );
utl_file.fclose( l_output );
dbms_output.put_line( utl_raw.cast_to_varchar2( v_raw ) );
EXCEPTION
WHEN OTHERS THEN
     dbms_output.put_line( sqlerrm );
end;
/

oops, sorry i overlooked the fact that the db is 9i; thanks for pointing it out Solomon.
Not sure about this, but a workaround could be to remove the "\n" characters at the end of each line using one of the many Unix utilities after the file has been created.
isotope

Removing HTML Comments from an entire website

Hi, I wonder if there is a simpler way to remove 'HTML Comments' from an entire website without having to use the regular expression '  ' using Find & Replace in DW 8? Many thanks, Simon

Thanks Murray, - I guess I was hoping for a 'button' in DW 8 that offered this function without writing a simple regular expression that works just fine. What laziness! My reasons for removing my HTML comments also puts me in a bad light!!! Best wishes, Simon

I'm trying to burn an iMovie in iDVD and at the end of the whole burn process it says "Multiplexer Error" "there was an error during formatting". How do I fix it so that it'll burn?

I'm trying to burn an iMovie in iDVD and at the end of the whole burn process it says "Multiplexer Error" "there was an error during formatting". How do I fix it so that it'll burn?

Hi
Multiplexing error is a very complex problem due to many things (long long list following) - one common but not obvious reason is that material on the iDVD menu goes outside the TV-Safe area (or just touching it).
So first - turn on TV-Safe area and move any object well inside of this.
Wide screen stretched - usually (as I think) it is due to making a 4x3 movie in a 16x9 wide-screen project OR the other way around. This forces one to on flat-screen TV (or other) set the presenting view right - My has 4x3, wide-screen, zoom and auto-wide-screen and I have to switch this by my remote for some DVD I've made "wrong" way.
Now my long long list on Multiplex Error
LONG LONG LONG LIST
Multiplexing Error
PART One.
Use of strange video/audio material e.g. .avi, .wmv, .mp3 etc.
I only use.
Video - StreamingDV (miniDV tape via FireWire) and
Audio - .aiff (as on audio-CDs) (else converted to this .aiff 48KHz)
Photo - .jpg (.bmp known problematic)
Chapters !
A. Using strange letters in video project name e.g. +,/; etc. keep to a-z and 0-9 strange letters in project name e.g. +
as described by Donnyboy69. Does the title of your project have any symbols or decimal points in it. If so, that is why you are getting the error. I had a project that had a + sign which caused the same problem. I renamed it without the symbol and low and behold, it worked.
B. Location of Chapters
• Can’t be at start or end of movie (Skip first/start one - iDVD sets this by it self. At the End - no need)
• Not in a transition (or within 2-3 seconds from it)
Important when from iMovie HD6 or previous - Now also observed when using FCE 4
PART Two.
from Robert Modero.
"Multiplexing Error. Problem during initialization of tracks"
Simply remember to add subtitles to your Quicktime files and menu buttons.
Once I did that, I was back in business.
from Boise Jim
Do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
I always makes a DiskImage first and test this so that it runs OK
I use only - Verbatim DVDs
I use only - DVD-R
I burn at an as slow speed possibly e.g. x1
This gives good DVDs
PART Three.
Multiplex Error
Chuck, Chicago 2/7/2009.
Back again. Here is what I have found to work. I also have and use a LaCie DVD-R/RW DL external drive and a LaCie external hard drive as well. Since yesterday I have tried a few ways to burn a themed iDVD project having four 56 minute movies on it, amounting to 226 minutes onto a DVD DL disc, capacity 240 minutes. Apple tech support really didn't know what to do but gave me a very good tip. I had two options left. Apple tech support's tip was to try disc image. One of the replies on a thread with this subject said not to, but my experience today is good. Put your project onto "Burn to disc image," under "iDVD, file." Yesterday encoding took me 23 1/2 hours. Overnight for iDVD disc image, encoding took 21 1/2 hours (again) while I slept. This morning I tried to copy/burn disc image to a DVD with Roxio Toast 7, and it stopped near the end of the burn with some kind of "error" message. So then I tried Utilities> Disc Utility> Burn icon, and followed it through. Be sure to click the DVD DL drive in the window "Burn disc in.". I had one other problem though. At the end of a 46 minute copy, it started to verify, and at the end of verify it rejected the burn. So I tried again, and when "verify" appeared, I clicked on "Skip." The disc finished burning and is doing fine and well. A long and tortuous process, but at last something works. I made several additional copies using Disc Utility. Best wishes. Chuck, Chicago.
2. Disconnect any other external devices not absolutely needed.
e.g. external USB/USB2 hard disks, other FW hard disks etc.
3 Chapter marks in transitions - minimum 2 sec from
FROM Bev.
(Not a 'guy' but I will answer!)
First, I do not think that mixing wide-screen and standard makes a difference in iDVD.
Second, you should use a better brand of DVD disk. Also, many of us have experienced fewer problems on playback with DVD-R disks. Recommended brands here are Verbatim, Maxell and Taiyo Yuden. Memorex and TDK are not consistent and may not give you a correct burn. They apparently have fewer layers in the composition of the disk. I have always used Verbatim DVD-R disks and have not had any burn problems.
Also, choose a slower burn speed, 4x or less.
Third, to determine if the iDVD project will burn properly, create a disk image file (from within iDVD, go File->Save as Disk Image) and test it. Mount the disk image and then open DVD Player (in Applications) and view your project. If it plays correctly, you can then burn the actual DVD disk from the disk image file using Disk Utility.
From. Boise, Idaho
I did everything I've seen suggested, but a friend (who used to be an Apple Genius) suggested that I do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
It worked, and I got a clean burn from iDVD.
Hopefully this can help other people.
by dheb0422
Well, I finally got it, and it was odd enough to post here incase anyone looks this topic up again. Many things were tried, including burning the unedited film, the edited film without titles and chapter markers, abbreviating the chapter markers in case length was the issue (remember the old iMovie used to truncate them when moving to iDVD?). In the process, I noticed that one, and only one, chapter marker was on the same line as the title marker. All the others were on the line above. The only way I seemed able to change that was to clip a few seconds of film. After that last clip, the offending marker took a place on the line above, as were all the others. That run published, compiled completely and burned. That's one for the books.
One user more writes
To add my experience with Multiplex Errors using iDVD (7.0.4), I recently created two iDVD projects
Video from both passed from FCE 4.01 with chapters
One project worked fine in creating disk image file
The other gave Multiplex Errors
I tried suggestions to remove special characters and no chapter marks at beginning, but nothing worked
Note that I've used iDVD for dozens of projects and this is first time I've run into Multiplex Errors
Anyway, for problem project, I tried an experiment where I removed all chapters in FCE and passed to new iDVD project
This time multiplex errors gone
So had something to do with chapters
So now I tried numerous experiments to remove individual chapters and try again creating disk image with new iDVD project
After numerous tries, I was able to narrow problem down to 1 "Bad" chapter mark
That is, when I left the "bad" chapter in my FCE project and passed to iDVD, iDVD gave multiplex error
When I removed "bad" chapter mark (and others in), no multiplex error
As a final experiment, I moved "bad" chapter mark about 5-10 sec's beyond original point and passed to iDVD, the multiplex errors now magically went away and I was able to finally create my disk image.
I have no idea why this worked, but thought I'd mention here in case someone else runs into similar problem.
Rich839
In addition to Bengt's fine advice, burning errors can occur if you have located any of your menu buttons wholly or partly outside of the safe TV viewing area. Go to your main project menu, then click on View/Show TV Safe Area, to check. Drag into the safe viewing area any buttons that are outside the safe viewing area.
Russ One - suggest this
Multiplex Error-There was an error during muxing preparation
One thing that worked for me was to export the video w/o chapter markers as a self contained movie (thereby not loosing the edits & etc). Then make a new FCE project and import that movie into a new sequence and add the chapter markers. I've used "-", "&" and "," with no problem in the chapter names. Removing the markers or exporting without them did solve the problem but renaming them with just numbers 1,2,3....5, did not solve the problem and since this problem seems to happen with with iMovie as well, it would suggest the problem is in the video or audio and in combination with the chapter markers iDVD just can't handle it. The only other possibility is that both iMovie and FCE share the same or similar chapter marker code that some how is corrupting the markers.
Summary - What to try
1. Chapters
• Only A to Z and 0 to 9 in chapter title
• No Chapter mark at very beginning of movie
• No Chapter mark in or within 2 seconds from any transition in movie
2. TV-safe area for buttons (no one outside this)
3. Safe re-boot
4. No other external devices connected - that are not needed
SDMacuser adds to this
• On #4 ... No ext. devices. Some think this applies mainly to ext. FW. Not the case. Also applies to ext. USB2 as well (not to mention flash drives too).
Do not leave 3rd party devices / camera / camcorder plugged in unless it is being used with iDvd's One Step process. Certain web cams can trigger this also (especially ones with added features like LED light/s that draw additional power from the FW or USB bus).
5. Minimum of 25Gb free space on Start-up hard disk
6. Make a DiskImage first - reduces where problem originates
7. Trash iDVD pref. file
8. Make a new iDVD project
9. Movies in project with same aspect ratio e.g. 4x3 or 16x9
10. No other programs/applications running during iDVD process. e.g. Internet, screen & energy savers
Yours Bengt W

How to add a sub report at the end of the main report whilst grouped

Hi!
I have a main report that is grouped by the Customers name and then details of transactions they did with the company.
I need to add a letter at the end of each group for each customer (With their name displayed in the letter). I tried adding a sub report in the report footer, but it only appears once at the end of the report, rather than at the end of each group for each customer.
How can I achieve the desired result?
Regards
Vik

Vik,
You are on the right track with the sub-report.
1. Create your letter in a separate report.
2. Add the Letter Report to your original report as a sub report in the group footer.
3. Set the report links on the "Group By" field.
This will give you a letter record for each report record with the same grouping as the main report.
Hope this helps,
Jason

How to remove HTML comments at the end of the portal page

Similar Messages

Maybe you are looking for