How to remove image files from audio files

i dont understand enough about how itunes worked...So my problem is, when i would add album art to a song, i would copy and past to the artwork box on the song. When i would find a better image, i would just past over the last one, not realizing that it was actually adding another image. This form of Copy/past(as i understand) saves the image to the audio file. *My question:* how do i remove the image files from the audio files...?

Right click on the file you want to remove the artwork from, choose Get Info then the Artwork tab, click on the image and press the delete button then OK. To remove from multiple items, highlight the adjacent tracks in your selection (click on the first in the list, hold down the shift key and click on the last), right click and choose Get Info, choose yes when you are asked if you want to edit multiple items, tick the box beside the small empty artwork window about halfway down on the right. (if the songs aren't adjacent to each other but spread through out the playlist or library CTRL & Click on each of the songs you want to highlight)

Similar Messages

  • How to remove a folder from claud files

    how to remove a folder from claud files?

    Folder (and file) deletion is a two-part process. First you Archive the file from the Files page at https://creative.adobe.com/files, or by deleting it from the Creative Cloud Files folder on your computer. Then you Permanently Delete the folder from the Archive at https://creative.adobe.com/archive.
    Help article: Creative Cloud Help | Manage and Sync files

  • [solved] How to remove specific pages from PDF file?

    I'm looking for a way to remove few pages from PDF file.
    Last edited by delor (2008-07-04 10:28:22)

    To remove first page I did this:
    pdftk original.pdf cat 2-end output result.pdf
    Any other propositions ?

  • How to remove empty lines from xml files after removing nodes from document

    <pre>
    Hi
    <b>i have xml document, which is shown below
    after removing some nodes from the document ,i am getting empty lines in place of removed nodes,how to resolve this and get the proper xml document without any errors</b>
    <?xml version="1.0" encoding="UTF-8" standalone="no"?>
    <!DOCTYPE Message SYSTEM "TRD01.dtd">
    <Message>
    <Header>
    <CounterPartyType>CLIENT</CounterPartyType>
    <CreationTime>20134455</CreationTime>
    <ErrorCode>363 </ErrorCode>
    <ErrorEnterPriseId>N</ErrorEnterPriseId>
    <ErrorStatus>1</ErrorStatus>
    <ErrorSystemId>STL</ErrorSystemId>
    <ErrorTimes>31</ErrorTimes>
    <MessageType>T</MessageType>
    <RecipientEnterpriseId>N</RecipientEnterpriseId>
    <RecipentSystemId>EXM</RecipentSystemId>
    <Remarks>REMARSK</Remarks>
    <SenderEnterpriseId>N</SenderEnterpriseId>
    <SenderSystemId>TR</SenderSystemId>
    </Header>
    </Message>
    <ErrorCode>363 </ErrorCode>
    <ErrorEnterPriseId>NIHK</ErrorEnterPriseId>
    <ErrorStatus>1</ErrorStatus>
    <ErrorSystemId>STL</ErrorSystemId>
    <ErrorTimes>31</ErrorTimes>
    XPathExpression expression5 = xpath.compile(xmlpath5);
    Object result5 = expression5.evaluate(doc, XPathConstants.NODE);
    Node node5 = (Node) result5;
    node5.getParentNode().removeChild(node5);
    XPathExpression expression6 = xpath.compile(xmlpath6);
    Object result6 = expression6.evaluate(doc, XPathConstants.NODE);
    Node node6=(Node) result6;
    node6.getParentNode().removeChild(node6);
    XPathExpression expression7 = xpath.compile(xmlpath7);
    Object result7 = expression7.evaluate(doc, XPathConstants.NODE);
    Node node7=(Node) result7;
    node7.getParentNode().removeChild(node7);
    doc.normalize();
    doc.normalizeDocument();
    TransformerFactory tf = TransformerFactory.newInstance();
    Transformer t = tf.newTransformer();
    t.setOutputProperty(OutputKeys.INDENT, "yes");
    t.setOutputProperty("{http://xml.apache.org/xslt}indent-amount", "4");
    t.setOutputProperty(OutputKeys.METHOD,"xml");
    t.setOutputProperty(OutputKeys.ENCODING, "UTF-8");
    the xml output i am getting is
    <?xml version="1.0" encoding="UTF-8" standalone="no"?>
    <Message>
    <Header>
    <CounterPartyType>CLIENT</CounterPartyType>
    <CreationTime>20134455</CreationTime>
    <MessageType>TRD01</MessageType>
    <RecipientEnterpriseId>N</RecipientEnterpriseId>
    <RecipentSystemId>STL</RecipentSystemId>
    <Remarks>REMARSK</Remarks>
    <SenderEnterpriseId>N</SenderEnterpriseId>
    <SenderSystemId>T</SenderSystemId>
    </Header>
    </Message>
    <b>could you please let me know how to avoid empty lines in the xml doucment output</b>
    this is the method i am using to get the result
    public void ValidateRecord(String xml){
    try{
    DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
    DocumentBuilder db = factory.newDocumentBuilder();
    //parse file into DOM
    /*DOMParser parser = new DOMParser();
    parser.setErrorStream(System.err);
    parser.setValidationMode(DTD_validation);
    parser.showWarnings(true);*/
    System.out.println ("HI THIS xml is validation "+xml);
    Resolver res = new Resolver();
    db.setEntityResolver(res);
    Document doc = db.parse(new InputSource(new StringReader(xml)));
    XPathFactory xpf = XPathFactory.newInstance();
    XPath xpath = xpf.newXPath();
    // XPathExpression expression = xpath.compile("//A/B[C/E/text()=13]");
    String xmlpath="/Message/Header/CounterPartyType/text()";
    String xmlpath1="/Message/Header/RecipentSystemId/text()";
    String xmlpath2="/Message/Header/ErrorSystemId/text()";
    XPathExpression expression = xpath.compile(xmlpath);
    XPathExpression expression1 = xpath.compile(xmlpath2);
    Object result = expression.evaluate(doc, XPathConstants.NODE);
    Object result1 = expression1.evaluate(doc, XPathConstants.NODE);
    Node node = (Node) result;
    Node node1 = (Node) result1;
    System.out.println("the values of the string is " +node.getNodeValue());
    System.out.println("the values of the string is " +node1.getNodeValue());
    // for (int i = 0; i < nodes.getLength(); i++) {
    //System.out.println(nodes.item(i).getNodeValue());
    // CAHNGING THE RECEIPENT NODE
    XPathExpression expression2 = xpath.compile(xmlpath1);
    Object result2 = expression2.evaluate(doc, XPathConstants.NODE);
    Node node2 = (Node) result2;
    System.out.println(node2);
    node2.setNodeValue(node1.getNodeValue());
    System.out.println(node2);
    //removing the nodes from document
    String xmlpath3="/Message/Header/ErrorCode";
    String xmlpath4="/Message/Header/ErrorEnterPriseId";
    String xmlpath5="/Message/Header/ErrorStatus";
    String xmlpath6="/Message/Header/ErrorSystemId";
    String xmlpath7="/Message/Header/ErrorTimes";
    XPathExpression expression3 = xpath.compile(xmlpath3);
    Object result3 = expression3.evaluate(doc, XPathConstants.NODE);
    Node node3 = (Node) result3;
    node3.getParentNode().removeChild(node3);
    XPathExpression expression4 = xpath.compile(xmlpath4);
    Object result4 = expression4.evaluate(doc, XPathConstants.NODE);
    Node node4 = (Node) result4;
    System.out.println("node value");
    System.out.println(node4.getParentNode().getNodeName());
    node4.getParentNode().removeChild(node4);
    XPathExpression expression5 = xpath.compile(xmlpath5);
    Object result5 = expression5.evaluate(doc, XPathConstants.NODE);
    Node node5 = (Node) result5;
    node5.getParentNode().removeChild(node5);
    XPathExpression expression6 = xpath.compile(xmlpath6);
    Object result6 = expression6.evaluate(doc, XPathConstants.NODE);
    Node node6=(Node) result6;
    node6.getParentNode().removeChild(node6);
    XPathExpression expression7 = xpath.compile(xmlpath7);
    Object result7 = expression7.evaluate(doc, XPathConstants.NODE);
    Node node7=(Node) result7;
    node7.getParentNode().removeChild(node7);
    // Node b13Node = (Node) expression.evaluate(doc, XPathConstants.NODE);
    //b13Node.getParentNode().removeChild(b13Node);
    doc.normalize();
    doc.normalizeDocument();
    TransformerFactory tf = TransformerFactory.newInstance();
    Transformer t = tf.newTransformer();
    t.setOutputProperty(OutputKeys.INDENT, "yes");
    t.setOutputProperty("{http://xml.apache.org/xslt}indent-amount", "4");
    t.setOutputProperty(OutputKeys.METHOD,"xml");
    t.setOutputProperty(OutputKeys.ENCODING, "UTF-8");
    t.transform(new DOMSource(doc), new StreamResult(System.out));
    catch (Exception e) {
         e.printStackTrace();
    System.out.println(e.getMessage());
    </pre>
    Edited by: user12185243 on Apr 6, 2013 6:38 AM
    Edited by: user12185243 on Apr 6, 2013 6:41 AM
    Edited by: user12185243 on Apr 6, 2013 6:43 AM
    Edited by: user12185243 on Apr 6, 2013 6:45 AM
    Edited by: user12185243 on Apr 6, 2013 9:00 AM

    either this way we can do this
    1)
    DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
    <b> factory.setIgnoringElementContentWhitespace(true); </b>
    DocumentBuilder db = factory.newDocumentBuilder();
    or
    2)
    java.io.StringWriter sw = new java.io.StringWriter();
    StreamResult sr = new StreamResult(sw);
    t.transform(new DOMSource(doc), sr);
    String xml1 = sw.toString().trim();
    <b> xml1=xml1.replaceAll("\\s",""); </b>
    System.out.println(xml1.trim());

  • How to remove empty space from a file

    Hi all,
    Can any one help on how to remove the blank spaces from a file.
    I used trim function but unable to remove the spaces.
    I have a file in which there is a name like 'JAIRAM' and am storing this file in a variable FILE_CONTENTS.
    Now am unable to compare FILE_CONTENTS with another value as it is storing empty spaces also from the file.
    Please help on this
    Thanks,
    Srini

    Trim only trim at the beginning or at the end. Can you try using the replace sql function.. see below..
    SQL> select replace('abc def',' ','') from dual ;
    REPLAC
    abcdef
    cheers

  • How to remove quotations marks  from csv file

    Hi
    My input file is a .csv file which contains each value in quotation marks
    ex: - "123456778","jakob","grade10"
    Also each record in the input file contains 333 values .
    i am reading these records and using stringtokenizer to fetch value by value for that record .
    i want to remove the quotation marks before i put the values back into an output file with .txt extension .
    those output files will be bcped later into sybase db.
    Should the quotation marks be removed in the java code or is their anyother way to remove the quotation marks from the output file while bcping them .
    Thank You

    njb7ty wrote:
    I also suggest if possible, you use tab delimited cvs files rather than comma delimited cvs files.That would be TSV, LOL...
    If there are commas inside your data elements, you will not be able to tell if they are part of the data or are delimiters. Tab delimited files avoid this.What if your data contain tabs? Although there's no CSV specification, the common standard practice is to use two double quotes to escape a quote.

  • How to remove HTML encoding from csv file using powershell

    Hi guys i am exporting data from a sharepoint list using powershell which works fine. My problem is that some of the fields contain HTML mark up. Is there a way to remove all of the html mark up from the array before writing it to csv ?
    I have tried playing about with System.Web.HttpUtility.HtmlDecode but with no luck the code runs but no html is removed.
    Below is a sample of my script.
    Set-Variable HOME $env:USERPROFILE -Force
    (Get-PSProvider FileSystem).Home = $HOME
    if(-not(Get-PSSnapin | where { $_.Name -eq "Microsoft.SharePoint.PowerShell"}))
    Add-PSSnapin Microsoft.SharePoint.PowerShell;
    # imports assembly needed for url stuff to do
    Add-Type -AssemblyName System.Web
    $SPWeb = Get-SPWeb "http://site url"
    $SPList = $SPWeb.Lists["List Name"]
    $exportlist = @()
    $SPList.Items | foreach {
    $obj = New-Object PSObject -Property @{
    "Employee full name" = $_["EMPLOYEEFNAME"]
    "Employee login name" = $_["EMPLOYEENAME"]
    "Department Name" = $_["DEPARTMENT"]
    System.Web.HttpUtility.HtmlDecode("OBJECTIVESTOBEACHIEVED_0") = $_["F1_S4a_OBJECTIVESTOBEACHIEVED_0"]
    "OBJECTIVESTOBEACHIEVED_1" = $_["F1_S4a_OBJECTIVESTOBEACHIEVED_1"]
    "OBJECTIVESTOBEACHIEVED_2" = $_["F1_S4a_OBJECTIVESTOBEACHIEVED_2"]
    "OBJECTIVESTOBEACHIEVED_3" = $_["F1_S4a_OBJECTIVESTOBEACHIEVED_3"]
    "OBJECTIVESTOBEACHIEVED_4" = $_["F1_S4a_OBJECTIVESTOBEACHIEVED_4"]
    "OBJECTIVESTOBEACHIEVED_5" = $_["F1_S4a_OBJECTIVESTOBEACHIEVED_5"]
    "OBJECTIVESTOBEACHIEVED_6" = $_["F1_S4a_OBJECTIVESTOBEACHIEVED_6"]
    "OBJECTIVESTOBEACHIEVED_7" = $_["F1_S4a_OBJECTIVESTOBEACHIEVED_7"]
    $exportlist += $obj
    $exportlist | select "Employee full name", "Employee login name", "Department Name", "OBJECTIVESTOBEACHIEVED_0", "OBJECTIVESTOBEACHIEVED_1", "OBJECTIVESTOBEACHIEVED_2", "OBJECTIVESTOBEACHIEVED_3", "OBJECTIVESTOBEACHIEVED_4", "OBJECTIVESTOBEACHIEVED_5", "OBJECTIVESTOBEACHIEVED_6", "OBJECTIVESTOBEACHIEVED_7" | Export-Csv ~/Export.csv -noType
    $SPWeb.Dispose()
    any help would be much appreciated.

    Should have googled before posting !
    "OBJECTIVESTOBEACHIEVED_0" = [Microsoft.SharePoint.Utilities.SPHttpUtility]::ConvertSimpleHtmlToText($_["F1_S4a_OBJECTIVESTOBEACHIEVED_0"],-1) -replace '\s+', ' '
    Clears all the additional white space. As always jrv you
    have saved the day, many thanks for all the help.
    Mal

  • How to remove a character in a file??

    I'm not getting how to remove a character from a file.Could anyone post a method to do this?Any help would be appreciable.

    Ohhh... and one more thing... unless you're really unlucky, a few "extranious trailing nulls" won't make a jot of difference to the size of the file on disk, each each file "fills" whole blocks anyway, which is 1K (I think) on both fister and *nix... unless of course we're talking "lots" of trailing-nulls, or lots-and-lots of files.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

  • How can I remove one page from adobe file

    How can I remove one page from adobe file, when I try to remove the page a dialgue box say "some pages are being used, so they can not be ereased"?

    Tools>Pages>Delete pages

  • How to remove a click from a sequence file mp4 or mp3, and make it only sequence left and right in GarageBand?

    How to remove a click from a sequence file mp4 or mp3, and make it only sequence left and right in GarageBand?

    "adrianTNT" <[email protected]> wrote in message
    news:e6aitv$hkm$[email protected]..
    >
    quote:
    Originally posted by:
    kglad
    > you're welcome. with your solution loading another mp3,
    are you sure it stops
    > the download of the first mp3?
    > Yes, it seems to work fine, it loads another sound in
    same sound (my_sound)
    > and it seems to replace loaded progress with the empty
    sound I gave and stops
    > previous loading.
    > I look at traffic icons on task bar and I see that there
    is no network traffic
    > after I click "stop" before this I could see continuous
    traffic while sound was
    > loading in background.
    Yeah, I remember someone posted that solution a long time
    ago. It seems if you load a file with the same name the cache
    doesn't
    know any better and adjusts the download size to the smaller
    one. Maybe it's a good way to do it! Could it be a way to remove an
    mp3 from someone's cache after it plays? hmmmm Will have to
    do more testing.
    tralfaz

  • How to extract text and image information from postscript file

    I want to write a programe,and extract text and image information from postscript file using Java.Is it possible? How to extract ?
    Thank!

    First of all, PostScript is not a "text" file. It can and often does contain binary data. Since PostScript streams often contain nested procedures, unless you process the procedure definitions and can "execute" them, you cannot simply "scan" a file to get what you want. No, I can't talk about this in detail since it is quite complex. But Adobe does have the
    PostScript Language Reference Manual on-line for download at
    . Look that over and you will have a fairly healthy respect as to the task involved.
    - Dov

  • How do I get a 3ga audio file to play on iphone 4s?

    How do I get a 3ga audio file to play on iphone
    4s?

    You don't need to download an App.
    My understanding is that you simply have to change the file extension from .3ga to.mp3 (on each file) and then they should play.
    That said, it works on a Macbook Pro - I've just tried it.
    Not sure about iOS though.
    Please reply if it works for you.

  • How to remove source link in PDF file

    Hello,
    I want to create pdf files of all newsletters our organization has sent out for the past year. I took a template from the software we use for sending out our newsletters. I saved this template as an htm file on my desktop. Then I used acrobat pro to create a new pdf file from a web page. It comes out perfectly, all links are working, no problems there. But on the left top of the document there is a link to where that file is stored on my pc. It looks like this:
    file:///C|/Documents%20and%20Settings/..........
    I hope somebody can tell me how I remove that link from there. I've been struggling with it for some time now.
    Kind regards,
    Lucas

    In the dialog of 'Create PDF from Web Page'you can change the settings.

  • How to import a logo from flat file to SAP in SMARTFORM.

    how to import a logo from flat file to SAP in SMARTFORM. i need to know whether TIFF format is used and also the full steps.
    Thanks,

    Hi,
    You can not directly use a logo from a file into a Smart form. First you will have to upload it to SAP. This has to be done only once. Once it is imported into SAP then you can use it in smart form. To import a logo to SAP, goto SE78. Open the tree under GRAPHICS. Select the file type and click on the Import (first button on the toolbar, just before delete button). Select the logo file and give it some appropriate name along with description. Select appropriate type of the image and click Continue. Your logo will be uploaded into SAP from a file. Now in your smartform, Create a Graphic Node, give the name of the logo along with other properties. In this way you can import a logo from a flat file into SAP and consequently in a smart form.
    Reward points if the answer is helpful.
    Regards,
    Mukul

  • [svn:fx-trunk] 5067: In preparation for adding ASDoc version tags for Flex, remove old tags from AIR files

    Revision: 5067
    Author: [email protected]
    Date: 2009-02-25 08:21:22 -0800 (Wed, 25 Feb 2009)
    Log Message:
    In preparation for adding ASDoc version tags for Flex, remove old tags from AIR files
    QE Notes: None
    Doc Notes: None
    Bugs: -
    Modified Paths:
    flex/sdk/trunk/frameworks/projects/airframework/src/mx/controls/FileSystemComboBox.as
    flex/sdk/trunk/frameworks/projects/airframework/src/mx/controls/FileSystemDataGrid.as
    flex/sdk/trunk/frameworks/projects/airframework/src/mx/controls/FileSystemEnumerationMode .as
    flex/sdk/trunk/frameworks/projects/airframework/src/mx/controls/FileSystemHistoryButton.a s
    flex/sdk/trunk/frameworks/projects/airframework/src/mx/controls/FileSystemList.as
    flex/sdk/trunk/frameworks/projects/airframework/src/mx/controls/FileSystemSizeDisplayMode .as
    flex/sdk/trunk/frameworks/projects/airframework/src/mx/controls/FileSystemTree.as
    flex/sdk/trunk/frameworks/projects/airframework/src/mx/controls/FlexNativeMenu.as
    flex/sdk/trunk/frameworks/projects/airframework/src/mx/controls/HTML.as
    flex/sdk/trunk/frameworks/projects/airframework/src/mx/core/FlexHTMLLoader.as
    flex/sdk/trunk/frameworks/projects/airframework/src/mx/core/IWindow.as
    flex/sdk/trunk/frameworks/projects/airframework/src/mx/core/Window.as
    flex/sdk/trunk/frameworks/projects/airframework/src/mx/core/WindowedApplication.as
    flex/sdk/trunk/frameworks/projects/airframework/src/mx/core/windowClasses/StatusBar.as
    flex/sdk/trunk/frameworks/projects/airframework/src/mx/core/windowClasses/TitleBar.as
    flex/sdk/trunk/frameworks/projects/airframework/src/mx/events/AIREvent.as
    flex/sdk/trunk/frameworks/projects/airframework/src/mx/events/FileEvent.as
    flex/sdk/trunk/frameworks/projects/airframework/src/mx/events/FlexNativeMenuEvent.as
    flex/sdk/trunk/frameworks/projects/airframework/src/mx/events/FlexNativeWindowBoundsEvent .as
    flex/sdk/trunk/frameworks/projects/airframework/src/mx/events/WindowExistenceEvent.as
    flex/sdk/trunk/frameworks/projects/airframework/src/mx/managers/NativeDragManagerImpl.as
    flex/sdk/trunk/frameworks/projects/airframework/src/mx/managers/WindowedSystemManager.as
    flex/sdk/trunk/frameworks/projects/airframework/src/mx/skins/halo/ApplicationTitleBarBack groundSkin.as
    flex/sdk/trunk/frameworks/projects/airframework/src/mx/skins/halo/StatusBarBackgroundSkin .as
    flex/sdk/trunk/frameworks/projects/airframework/src/mx/skins/halo/WindowBackground.as
    flex/sdk/trunk/frameworks/projects/airframework/src/mx/skins/halo/WindowCloseButtonSkin.a s
    flex/sdk/trunk/frameworks/projects/airframework/src/mx/skins/halo/WindowMaximizeButtonSki n.as
    flex/sdk/trunk/frameworks/projects/airframework/src/mx/skins/halo/WindowMinimizeButtonSki n.as
    flex/sdk/trunk/frameworks/projects/airframework/src/mx/skins/halo/WindowRestoreButtonSkin .as
    flex/sdk/trunk/frameworks/projects/airframework/src/mx/utils/DirectoryEnumeration.as
    flex/sdk/trunk/frameworks/projects/airframework/src/mx/utils/DirectoryEnumerationMode.as

    I'm also having this problem. I'm using Flash Builder 4.6, AIR 3.4 and I've made a DLL (e.g. ExtensionDll.dll) which needs to call functions in another DLL (e.g. DllUsedByExtensionDll.dll) . I've made sure my ANE is working with the ExtensionDll.dll already, so there are no issues with my actionscript code or my ANE packaging or my DLL compilation. However, once I start calling functions from the other DLL, it starts throwing me Error #3500. Even if I call this function (e.g. abc()) in ExtensionDll.dll, but I never actually use the function from actionscript, and I call another function (e.g. def()) from actionscript, the Error #3500 still appears, so it does not seem to depened on the whether the code is used or not.
    It's similar to this problem.
    http://stackoverflow.com/questions/9823504/how-to-use-external-dll-in-air-native-extension
    Does anyone have a solution or at least a way to debug this?

Maybe you are looking for

  • MODEL clause using CONNECY BY PRIOR

    Hello. I have the following table, CONTEXT_MAPPING: Name Null? Type ID NOT NULL NUMBER(38) CONTEXT_ITEM NOT NULL VARCHAR2(30) ID_1 NUMBER(38) ID_2 NUMBER(38) ID_3 NUMBER(38) ID_4 NUMBER(38) ID_5 NUMBER(38) It's a self referencing table, i.e. ID_1 wil

  • InDesign Crashing on Mac 10.8.2 and 10.8.3

    Hello Please find the crash report here. http://pastebin.com/RuWs8cWL Updated OS but no change. There are other machines that have the same application but only this one has that problem.

  • Dolby Digital Plus Application Equalizer not working

    Having Lenovo G50 Series notebook with dolby digital plus audio software.  Application fails to perform if we select manual settings for graphic equalizer when in custom mode 1 or 2. if we scrolls one or other strip upwards,as soon as i release mouse

  • Deploying ODI win on ODI Unix ?

    hey ODI experts.. we are using ODI (windows) 10.1.3.5.6 to populate Hyp Planning (11.1.1.3) & HFM .. the client is planning on moving ODI to Unix platform.. Questions: 1. would ODI Unix be able to read the objects developed by ODI Windows ? 2. I reme

  • Storagetek 6140 - chunk size? - veritas and sun cluster tuning?

    hi, we've just got a 6140 and i did some raw write and read tests -> very nice box! current config: 16 fc-disks (300gbyte / 2gbit/sec): 1x hotspare, 15x raid5 (512kibyte chunk) 3 logical volumes: vol1: 1.7tbyte, vol2: 1.7tbyte, vol3 rest (about 450gb