How to remove # in the report

Hi Experts ,
I am finding # in the report how to remove it
Thanks in Advance
Saritha

Hi Saritha,
Its not technically possible to remove '#' from output when there is no value for that InfoObject unless you exclude it from result set. Other option is to have some character, in our scenario the way we did is, we always put dot ' . ' instead of blank while loading the data into data target which can be done using Transformations / update rules / Transfer rules.
Anyway you can suppress it....Try this,
Step 1: Select the Characteristic which u want to hide (#) in the Bex report.
Step 2: Right click --- restrict --> you will get a popup screen with some values and Select # from the left side of the screen and drop it to the right side.
Step 3: Right click on the # you will get an option "exclude from selection". Select it and activate.
Hope it Helps,
Thanks,
Amit kr.

Similar Messages

How to remove/reduce the default space between two sections ?

How to remove/reduce the default space between two sections on the dashboards?

if you make a modification of the Dashboardlayout in the file PortalContent.css like
.SectionTable {
margin-bottom: 2px;
width: 100%;
border-width: 1px;
border-style: none;
border-color: #CECECE;
There will be no more borders. However the gap exists but the look of the 2-section report might look better.
There is an ER raised at the Oracle Support.
Enhancement 5655489: ABILITY FOR USERS TO CONTROL THE GAP LENGTH BETWEEN REPORTS AND SECTIONS
Hope it helps you..
Regards,
Raghu

How can I run the report for different input values at the same time?

Reports version: Report Builder 6.0.8.13.1
Oracle version: Oracle8i Enterprise Edition Release 8.1.7.0.0
I want to run the same report for different input parameter values and spool each o/p to different file and ftp to a server. For this, as a first step, I am spooling different input values in to a file, reading those values through a loop and calling the report for that input values. Each report run/execution is taking 15 minutes. Total report execution is taking approximately 4 hours (assuming 16 different input values) to complete. So I have to wait 4 hours to see ALL outputs.
I would like to run the report parallel for ALL the input values and I should be able to see the ALL outputs with in 15 or 16 minutes.
In my shell script, I added & symbol at the end of the report call to start/run the job in the background. Due to this the control passed to the next step after the report call. At this place I have an ftp command to send the output file to a different server and it is giving error some thing like o/p file is not available/created yet". This is due to the fact that report writer is NOT yet completely started/initiated or it is NOT completed the spooling.
How can I run the report at the same time for all the input values and save the time?
Thanks in advance.
Kishore.

Increase the number of server engines running right now it seems there is only one engine running ,increase it to 4 or 6
and then atleast 4 or 6 reports will run simultaneously.
For FTPing the output add to your sript to check whether it is locked and if not then only try to ftp .
Also for more better functionality read the document (chapter 15 ) for 10g reports for its new fuinctionality.
http://download.oracle.com/docs/cd/B14099_17/bi.1012/b14048/toc.htm
Thanks
Subodh

How can we put the report which is generated by the program into spool??

How can we put the report which is generated by the program into spool??
I had generated a file in Unix which had the report but now the requirement has changed.
Regards,
Shashank.

Hi Shashank,
If the program is executed in the background and it has the write statement then the spool will automatically generated.
Reward points if useful.
Regards,
Atish

How can I put the report generated by a program into a File?

Hi all,
 How can I put the report generated by a program into a File?It can be in TXT format or excel format which ever is possible.
I need to export this file to memory,How can I do that??
Regards,
Shashank.

Hello Shashank,
Please ignore my previous answer... Ofcourse it works...
There are several ways to do this...
two of them are
1. List -> Save -> File and press enter..
 it will ask for the format, then path where to save it. Just give the path.
2. Using function module 'GUI_DOWNLOAD'.
I'm giving the example bellow which explains the usage of both GUI_UPLOAD and GUI_DOWNLOAD.
To do this... you need to have folder with name 'TEST' and a .txt file in it with name 'test'. And contents of it are :
TEST1 ,BOT
TEST2 ,BOT
TEST3 ,BUT
with spaces.
REPORT zssr_bdc .
DATA: BEGIN OF g_t_itab OCCURS 0,
 matnr LIKE mara-matnr,
 maktx LIKE makt-maktx,
 END OF g_t_itab.
DATA: g_t_bdcdata TYPE TABLE OF bdcdata.
DATA: path TYPE string,
 path1 type string.
path = 'C:\Documents and Settings\ssr3kor\Desktop\TEST\test.txt'.
path1 = 'C:\Documents and Settings\ssr3kor\Desktop\TEST\test1.txt'.
*contents of test.txt *
*TEST1 ,BOT *
*TEST2 ,BOT *
*TEST3 ,BUT *
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
 filename = path
TABLES
 data_tab = g_t_itab.
LOOP AT g_t_itab.
WRITE:/1(18) g_t_itab-matnr, 20(40) g_t_itab-maktx.
ENDLOOP.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
 filename = path1
 filetype = 'ASC'
TABLES
 data_tab = g_t_itab.
Now you will get one .txt file with name 'TEST1.TXT' in the TEST folder.
REWARD POINTS IF IT IS HELPFUL
Regards
Sasidhar Reddy Matli

How can we generate the reports in html or text file formats?

Hi,
Is there any package that can help in creating HTMLDB reports in .txt files or .html files? (Similar to TEXT_IO in Oracle Forms)
How can we generate the reports in html or text file formats from HTMLDB?
Thanks in Advance
Renjith

Hello all.
Bi Publisher is great, but has a very high price tag. It's even more expensive than Forms & Reports Services. We are considering APEX to replace Forms & Reports on the web, but the reporting limitations are still a problem.
I wonder if there is another option.
Thanks

How Can we improve the report performance..?

Hi exports,
I am learning the Business Objects XIR2, Please let me know How Can we improve the report performance..?
Please give the answer in detailed way.

First find out why your report is performing slowly. Then fix it.
That sounds silly, but there's really no single-path process for improving report performance. You might find issues with the report. With the network. With the universe. With the database. With the database design. With the query definition. With report variables. With the ETL. Once you figure out where the problem is, then you start fixing it. Fixing one problem may very well reveal another. I spent two years working on a project where we touched every single aspect of reporting (from data collection through ETL and all the way to report delivery) at some point or another.
I feel like your question is a bit broad (meaning too generic) to address as you have phrased it. Even some of the suggestions already given...
Array fetch size - this determines the number of rows fetched at a single pass. You really don't need to modify this unless your network is giving issues. I have seen folks suggest setting this to one (which results in a lot of network requests) or 500 (which results in fewer requests but they're much MUCH larger). Does either improve performance? They might, or they might make it worse. Without understanding how your network traffic is managed it's hard to say.
Shortcut joins? Sure, they can help, as long as they are appropriate. [Many times they are not.|http://www.dagira.com/2010/05/27/everything-about-shortcut-joins/]
And I could go on and on. The bottom line is that performance tuning doesn't typically fall into a "cookie cutter" approach. It would be better to have a specific question.

How can we generate the report of backup,tablesapcefrom OEM / RMAN

How can we generate the report of backup status,tablesapce(usedf,free space) for all the databases from OEM / RMAN
1.)we need generate the report of tablespace used,free, archive...
2.)How can we generate the Backup status report also

user13584223 wrote:
How can we generate the report of backup status,tablesapce(usedf,free space) for all the databases from OEM / RMAN
1.)we need generate the report of tablespace used,free, archive...There are DBA_* views that expose the necessary information. They are documented in the Reference Manual.
2.)How can we generate the Backup status report alsoThere are rman commands that give that. They are documented in the Backup and Recovery User's Guide.
=================================================
Learning how to look things up in the documentation is time well spent investing in your career. To that end, you should drop everything else you are doing and do the following:
Go to [url tahiti.oracle.com]tahiti.oracle.com.
Locate the link for your Oracle product and version, and click on it.
You are now at the entire documentation set for your selected Oracle product and version.
BOOKMARK THAT LOCATION
Spend a few minutes just getting familiar with what is available here. Take special note of the "books" and "search" tabs. Under the "books" tab (for 10.x) or the "Master Book List" link (for 11.x) you will find the complete documentation library.
Spend a few minutes just getting familiar with what kind of documentation is available there by simply browsing the titles under the "Books" tab.
Open the Reference Manual and spend a few minutes looking through the table of contents to get familiar with what kind of information is available there.
Do the same with the SQL Reference Manual.
Do the same with the Utilities manual.
You don't have to read the above in depth. They are reference manuals. Just get familiar with what is there to be referenced. Ninety percent of the questions asked on this forum can be answered in less than 5 minutes by simply searching one of the above manuals.
Then set yourself a plan to dig deeper.
- Read a chapter a day from the Concepts Manual.
- Take a look in your alert log. One of the first things listed at startup is the initialization parms with non-default values. Read up on each one of them (listed in your alert log) in the Reference Manual.
- Take a look at your listener.ora, tnsnames.ora, and sqlnet.ora files. Go to the Network Administrators manual and read up on everything you see in those files.
- When you have finished reading the Concepts Manual, do it again.
Give a man a fish and he eats for a day. Teach a man to fish and he eats for a lifetime.
=================================

How to remove # from the end of each lines of .csv file.

Hi ,
I have uploaded .csv file from my local m/c (windows) to application server (unix) thru. FM 'ARCHIVFILE_CLIENT_TO_SERVER'
Issue is when I open the file in AL11 it is showing # at end of each line. Click below link to see the output file.
[https://docs0.google.com/document/edit?id=1PzjhljdCC2Wgj9L1dZ51G4pHJ0G_7jJwQAMqcJHdggc&hl=en#]
Pls. help me how to remove all the # from the file.
Thanks in advance.
Devinder

Hi ,
use this
Declare this
that # value is actually use of Tab in file
so in order to remove that use below code
DATA :C_TAB(1) TYPE c VALUE cl_abap_char_utilities=>HORIZONTAL_TAB .
loop at it_data .
refno = it_data-line .
REPLACE ALL OCCURRENCES OF c_tab IN refno WITH ''.
modify it_data .
endloop.
Regards
Deepak.

How do I find the report server name, and then run paper report from forms?

How do I find the report server name, and then run paper report from forms?
I am having a problem running report 9i from forms 9i (see below thread). How do I find out the name of the report server? I checked my C:\ids\reports\conf directory but don't see anything that gives me the name of the reports server. I also don't have a iashome directory.
Also, I just want to run the paper report (not the web version).
Thanks.

Hi,
please read teh Forms / Reports integration paper in teh Collateral section for Oracle9i Forms at otn.oracle.com/products/forms
In summary, you have to create an external Reports Service that you can then give a name.
Frank

How to remove all the cleaup events from DBA_AUDIT_MGMT_CLEAN_EVENTS

Dear gurus,
how to remove all the cleaup events from DBA_AUDIT_MGMT_CLEAN_EVENTS
Arun

Hi,
Take a look:
http://www.morganslibrary.org/reference/pkgs/dbms_audit_mgmt.html
Regards,

TS4147 How to remove all the duplicated contacts from ICloud?

How to remove all the duplicated contacts from ICloud?

If your Mac is syncing contacts with your iCloud account, open Contact on your Mac and go to Card>Look for Duplicates, then Merge the found duplicates. These changes will be synced to iCloud.

How do i make the report in a horizontal form

Hello,
How do i make the report in a horizontal form (reports 10g) i cant find that option..
zanks

you must set the ORIENTATION under Data model - system parameters to LANDSCAPE
and under layout model properties of Main section set width and height

How to group all the reports and execute like single application ?

Hi,
I am trying to develop some reports in Crystal Reports XIR2 , here i have Design and Preview options that is for every report i should see , how to group all the reports and execute like single application?
any option is there to run the report
i mean is it possible to have a home page from there have links to each report and when i click on the link corresponding report should be shown , if it is possible , How?
Regards,
kathyaini

You will want to look into Crystal Reports Server, it does exactly what you describe and more:
http://www.businessobjects.com/product/catalog/crystalreports_server/
Download a trial of CR Server here:
http://www.businessobjects.com/product/freetrials.asp

How can I change the report query source on the fly

I am new to Bi Publisher,
I have a user that wants to select certain columns in the table then have bi publisher make a pdf on just those columns
without making different reports for each of there choices, how can i make the report variable?
Thanks,
Doug

Hi Doug,
You can also use lexical parameters to determine the columns in a Data Template (or Oracle Report)... taking it to the extreme the major components of a BI Publisher data template could be dynamic.... something like:
select &select_clause
from &from_clause
where &where_clause
Regards,
Gareth
http://garethroberts.blogspot.com
http://www.virtuate.com

How to remove # in the report

Similar Messages

Maybe you are looking for