How to remove indents from XML?

I have a xml like this:
<?xml version="1.0" encoding="UTF-8"?>
<view>
     <help>
          <block>No.1</block>
          <device>USB</device>
     </help>
</view>
How could I output the xml to :
<?xml version="1.0" encoding="UTF-8"?><view><help><block>No.1</block>          <device>USB</device></help></view>
The reason to output like this is to make the xml comparison passed.
I use org.custommonkey.xmlunit.XMLTestCase.compareXML to compare two xml string, one from Java code, the other from C# code. Now, since there are new lines and whitespaces embedded in the Java generated XML, the comparison always failed. Is there any way to output the indent xml to the one string only?

Try running the strings through something like this before comparing:
String <stringname> = <stringname>.replaceAll("\\n|\\t|\\s|\\r", "");
that should normalize them both to no spaces, tabs, newlines, carrage returns.

Similar Messages

How to remove Unicode from XML file

I get following error when unmarshal xml:
[java] org.xml.sax.SAXParseException: An invalid XML character (Unicode: 0x15) was found in the element content of the document.
Anyone know how to remove Unicode from xml file? Can I remove the unicode by rebuild the file?
Thanks

These sort of error usually occur when you're using a different character encoding to read the file than the one you wrote it with. Perhaps if you were to post the problem section of the file and/or the code that created it in the first place.

How to remove xmlns from xml using java

Hi,
<DLList xmlns="http://www.test.com/integration/feed" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<Weather>
<StateName>Karnataka</StateName>
<ForecastName>Bagalkote</ForecastName>
<Humidity>89.9</Humidity>
</Weather>
<Weather>
<StateName>Karnataka</StateName>
<ForecastName>Devengiri</ForecastName>
<Humidity>89.9</Humidity>
</Weather>
</DLList>
The above xml needs to be decomposed using xsu.I am facing a small problem because the xml has namespaces.
How to remove the namespace using java to get the below xml
Note:I am using XSLT for the transformation.The XSLT tag is not identifying the <DLList> tag with name space
<DLList>
<Weather>
<StateName>Karnataka</StateName>
<ForecastName>Bagalkote</ForecastName>
<Humidity>89.9</Humidity>
</Weather>
<Weather>
<StateName>Karnataka</StateName>
<ForecastName>Devengiri</ForecastName>
<Humidity>89.9</Humidity>
</Weather>
</DLList>
Please help.Let me know if any other information is required
Thanks

OK, here goes :
For the example, I'll use a TB_DISTRICT table with the following structure :
create table tb_district (
sr_no number(3),
district_name varchar2(100)
);loaded with data from this page :
http://india.gov.in/knowindia/districts/andhra1.php?stateid=KA
and this XML document (one additional record compared to the one you posted) :
<DLList xmlns="http://www.test.com/integration/feed" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<Weather>
<StateName>Karnataka</StateName>
<ForecastName>Bagalkote</ForecastName>
<Humidity>89.9</Humidity>
</Weather>
<Weather>
<StateName>Karnataka</StateName>
<ForecastName>Devengiri</ForecastName>
<Humidity>89.9</Humidity>
</Weather>
<Weather>
<StateName>Karnataka</StateName>
<ForecastName>Dharwad</ForecastName>
<Humidity>70.1</Humidity>
</Weather>
</DLList>In order to access the XML, I'll also use this Oracle directory object :
create directory test_dir as 'D:\ORACLE\test';Final relational tables are :
create table BUSINESS_TABLE
STATE         VARCHAR2(30),
DISTRICT_NAME VARCHAR2(30),
HUMIDITY      NUMBER
);and
create table REJECT_TABLE
STATE         VARCHAR2(30),
DISTRICT_NAME VARCHAR2(30),
HUMIDITY      NUMBER,
ERROR_MESSAGE VARCHAR2(500)
);With XMLTable function, we can easily break the XML into relational rows and columns ready to use for DML :
SQL> alter session set nls_numeric_characters=". ";
Session altered
SQL>
SQL> SELECT *
2 FROM XMLTable(
3    XMLNamespaces(default 'http://www.test.com/integration/feed'),
4    '/DLList/Weather'
5    passing xmltype(bfilename('TEST_DIR','test.xml'), nls_charset_id('CHAR_CS'))
6    columns
7      state         varchar2(30) path 'StateName'
8    , district_name varchar2(30) path 'ForecastName'
9    , humidity      number       path 'Humidity'
10 )
11 ;
STATE                          DISTRICT_NAME                    HUMIDITY
Karnataka                      Bagalkote                            89.9
Karnataka                      Devengiri                            89.9
Karnataka                      Dharwad                              70.1
Then with a multitable insert, we load both the business table and the reject table (if the district name does not exist in TB_DISTRICT) :
SQL> INSERT FIRST
2    WHEN master_district_name IS NOT NULL
3      THEN INTO business_table (state, district_name, humidity)
4                VALUES (state, district_name, humidity)
5    ELSE INTO reject_table (state, district_name, humidity, error_message)
6              VALUES (state, district_name, humidity, 'Invalid district name')
7 WITH xml_data AS (
8    SELECT *
9    FROM XMLTable(
10      XMLNamespaces(default 'http://www.test.com/integration/feed'),
11      '/DLList/Weather'
12      passing xmltype(bfilename('TEST_DIR','test.xml'), nls_charset_id('CHAR_CS'))
13      columns
14        state         varchar2(30) path 'StateName'
15      , district_name varchar2(30) path 'ForecastName'
16      , humidity      number       path 'Humidity'
17    )
18 )
19 SELECT x.*
20       , t.district_name as master_district_name
21 FROM xml_data x
22       LEFT OUTER JOIN tb_district t ON t.district_name = x.district_name
23 ;
3 rows inserted
SQL> select * from business_table;
STATE                          DISTRICT_NAME                    HUMIDITY
Karnataka                      Dharwad                              70.1
SQL> select * from reject_table;
STATE                          DISTRICT_NAME                    HUMIDITY ERROR_MESSAGE
Karnataka                      Bagalkote                            89.9 Invalid district name
Karnataka                      Devengiri                            89.9 Invalid district name

How to remove namespace from xml in ALSB?

I have a xquery transformation which works for data without namespace. But the data coming from source system has namespace details in it. Is there a way to strip the xml of namespace details from xml before passing it to xquery transformation?

Hi
silly mistake :P
Following 'bold' declaration was not there!!
Just copy paste following code as xquery and it will be all ok:
declare namespace xf = "http://tempuri.org/vijfhuizen/com/myMessage/";
declare function xf:strip-namespace($e as element())
as element()
element { xs:QName(local-name($e)) }
for $child in $e/(@*,node())
return
if ($child instance of element())
then xf:strip-namespace($child)
else $child
declare variable $e as element() external;
xf:strip-namespace($e)

Remove element from xml using dom.

i want to remove an element from an xml file using dom.
i remove the element but the whole content of the file is also deleted.
how can i rewrite the file.

vij_ay wrote:
subject :Remove element from xml,but if empty element in input file then output should be <tag></tag>, not like <tag.xml/>I assume you mean <tag/> but why do you want this? Any application that will not accept this valid XML construct is flawed and a bug report should be raised against it.

How to retrieve value from xml file

hi all,
can somebody pls tell me how to retrieve value from xml file using SAXParser.
I want to retrieve value of only one tag and have to perform some validation with that value.
it's urgent .
pls help me out
thnx in adv.
ritu

hi shanu,
the pbm is solved, now i m able to access XXX no. in action class & i m able to validate it. The only thing which i want to know is it ok to declare static ArrayList as i have done in this code. i mean will it affect the performance or functionality of the system.
pls have a look at the following code snippet.
public class XMLValidator {
static ArrayList strXXX = new ArrayList();
public void validate(){
factory.setValidating(true);
parser = factory.newSAXParser();
//all factory code is here only
parser.parse(xmlURI, new XMLErrorHandler());
public void setXXX(String pstrXXX){
strUpn.add(pstrXXX);
public ArrayList getXXX(){
return strXXX;
class XMLErrorHandler extends DefaultHandler {
String tagName = "";
String tagValue = "";
String applicationRefNo = "";
String XXXValue ="";
String XXXNo = "";
XMLValidator objXmlValidator = new XMLValidator();
public void startElement(String uri, String name, String qName, Attributes atts) {
tagName = qName;
public void characters(char ch[], int start, int length) {
if ("Reference".equals(tagName)) {
tagValue = new String(ch, start, length).trim();
if (tagValue.length() > 0) {
RefNo = new String(ch, start, length);
if ("XXX".equals(tagName)) {
XXXValue = new String(ch, start, length).trim();
if (XXXValue.length() > 0) {
XXXNo = new String(ch, start, length);
public void endElement(String uri, String localName, String qName) throws SAXException {
if(qName.equalsIgnoreCase("XXX")) {
objXmlValidator.setXXX(XXXNo);
thnx & Regards,
ritu

How to remove group in XML Publisher template

Hi All,
How to remove group in XML Publisher template while desining as below is one example in that i want to remove the group no 2,3,4 or G Supp Seq,List G Audit,G Audit and want the output of line no 1 and 5 and then 1 or Batch / Entry/ Category/ List G Supp Seq/C Line No / C Transaction / C Document//C Credit/C Debit/C H Seq Name.
Example:
1) Batch / Entry/ Category/ List G Supp Seq                    /C Credit/C Debit/C H Seq Name
2)          G Supp Seq
3) List G Audit
4) G Audit
5)     C Line No / C Transaction / C Document
Kindly help how to generate the output without the line no 2,3,4.
Regards,
Sushant

Sushant,
you can try to design the RTF by Regrouping the XML data based on your requirement then you may get proper order.
Please see the Regrouping XML concept in the user guide.
Regards,
Prasad Raju

HT1386 The first time I synced my iphone with my mac, I didn't realize that all of my photos from iphoto would transfer over to the phone. Now, I need to remove some, as they are taking up too much space. I cannot figure out how to remove them from the

The first time I synced my iphone 4 with my mac, I didn't realize that all of my photos from the iphoto library would transfer over to the phone (more than 3,000). Now, I need to remove some, as they are taking up too much space. I cannot figure out how to remove them from the phone. I tried to uncheck boxes and sync again, but I get a message that there is no room on the iphone. I've read as many articles as I can find, but still cannot manage this. Thanks for any help.

Open itunes, connect iphone, select what you want, sync

How to remove pics from my 3GS...???

How to remove pics from my 3GS..???

Photos taken with the phone can be deleted by selecting them and hitting the little wastebasket icon in the right bottom corner.
Photos you did sync to your phone, can only be removed by deselecting them in the photo pane in iTunes, the following sync will remove them from the phone.

Does anyone know how to remove images from google

i had instagram and i didnt upload images of myself but i only used my own image in the display picture and some how it has gone on to the google image search yesterday i deleted my account but when i checked to see if my images do appear in the google images i had some really bad regrets !! i reallywant to know how i can remove pictures off the google image search even doe this does not kind of relate thank you .

Does anyone know how to remove vocals from an import from I tunes...a polyphonic stereo mix ?
If you are talking about some "Karaoke" method using Logic I'll try to offer one. Before that I must say that most of the Karaoke methods are based on reversing the Phase of one of the stereo channel and bussing or merging the stereo into Mono. The result is: killing all Pan Centered in the mix - like Main Vocal, Bass, Kick, SN ect.
The artifacts of the Stereo FX of the main vocal will stay in the Karaoke, cause the FX is stereo etc.
Here is the Logic Setup I can offer to try some Karaoke trick using Logic.
1. Import a Stereo mix into a Logic Stereo track.
2. Create another stereo track and duplicate (copy) the Original Mix region to the duplicated track.
3. Hard Pan L/R both stereo tracks.
4. Insert an EQ and Gainer plugins into the duplicated track (R).
5. Set the Output select of the both tracks to a Bus and assign the new Aux Track Switch mode to "Mono".
6. Open the Gainer plugin and thick the "Phase Invert" Right button.
7. To keep the "lowend" instruments like the bass and kick, open the EQ plugin and enable the Low Cut filter and try some Hz settings 80-115, or different Q which will sounds better for your Karaoke.
P.S Click the image below to show its real resolution!
Regards,
A.G
======================================
www.audiogrocery.com
Author of: Logic GUI Deluxe(Free), Vox De Bulgaria s.a.g.e vocal pack for RMX, Logic Snapshot Console, RMX Power CTRL - Logic Environment Midi editor for Stylus etc.
======================================

How to remove iPhone from a certain computer

How to remove iPhone from a certain computer along with it's ID to allow another phone to use the comp soley.

You do not need to do anything.
Simply stop syncing the iphone to the computer and begin syncing the new iphone to the computer.

How to extract data from XML file with JavaScript

HI All
I am new to this group.
Can anybody help me regarding XML.
I want to know How to extract data from XML file with JavaScript.
And also how to use API for XML
regards
Nagaraju

This is a Java forum.
JavaScript is something entirely different than Java, even though the names are similar.
Try another website with forums about JavaScript.
For example here: http://www.webdeveloper.com/forum/forumdisplay.php?s=&forumid=3

How to remove Seperator from check-in and profile check in pages

How to remove Seperator from check-in and profile check in pages
The seperator is included on the checkin pages, which is present in the std_page with name "std_namevalue_separator", this is called by td_document_checkin_fields and std_document_file_fields.
Defination of include:
<@dynamichtml std_namevalue_separator@>
<$if not isUploadFieldScript$>
<tr>
<td width="<$captionFieldWidth$>"><hr /></td>
<td width="<$captionEntryWidth$>"><hr /></td>
</tr>
<$endif$>
<@end@>
I have to remove the following include from some of the profile check in page.
Please suggest if anyone have some idea, how to proceed.
Thanks,
Sumit

791848 wrote:I have to remove the following include from some of the profile check in page.The key here is that you want to do this in some profiles, not all profiles or globally, if I'm reading this right.
Without writing a component, you can put this code in the "side effects" box in the desired profile(s). This code removes the horizontal rule, and inserts a non breaking space in its place.
<$setResourceInclude("std_namevalue_separator","<$if not isUploadFieldScript$>
<tr>
<td width=\"<$captionFieldWidth$>\"> </td>
<td width=\"<$captionEntryWidth$>\"> </td>
</tr>
<$endif$>")$>YMMV. The non-breaking space may get stripped out in the forum.

How to remove text from .swf animation?

how to remove text from .swf animation? Can no find this text
in fla file. Flash 8.

exactly what 'text' are you referring to? text that you typed
on the Stage using the 'textTool'? simply select the text with the
'arrowTool' and hit delete.
If you are referring to a textField that you want to
eliminate after a certain amount of time, within your animation
sequence. first copy the text, create a new layer, paste the text
in place, then where you want to have the text 'disappear' insert a
'blank keyframe' at that point in the text layer.
OR place the textfield within a MC and remove it with code.
OR if the text is dynamic and you wish to use the position at a
later time, pass a value of null or and empty string to the field
at the point you wish. And there are other ways still. :) hope one
of these works for you.

How to remove passcode from ipod touch 3g if power botton is not working?

how to remove passcode from ipod touch 3g if power botton is not working?

Use this program to place the iPod in recovery mode so that you then can restore the iPod via iTunes.
RecBoot: Easy Way to Put iPhone into Recovery Mode

How to remove indents from XML?

Similar Messages

Maybe you are looking for