How to remove/install hard drive?

Hi,
Does anyone know how to remove a hard disk from the 15" 1.67ghz Powerbook? I can't find instructions anywhere. If anyone can point me to a service manual or something similar I would be most greatful.
I know this voids warranty, it doesn't matter, as it's not relevant in this case.

Check out the PowerBook fix it guides…
http://www.pbfixit.com/Guide/54.0.0.html

Similar Messages

How to remove a hard drive on a Digital HiNote Ultra CT475

I have an old HiNote Ultra CT475, that I need to remove the hard drive and have destroyed. Anyone know how to get the case off with destroying it? I have the front edge up, cause I found screws under the foot pad in front. I do not see any more screws except on the back and they have all been remove.

Sorry it is made by DEC electronics, now out of business, we only help with HP products.

How to wipe the hard drive on a screen-dead Powerbook G3?

The display on my 1998 G3 Wallstreet Powerbook recently went black and the computer made a noise that I understand is called The Chimes of Death, although the hard drive still makes whirring noises. My local and trustworthy Apple repair service assures me the Powerbook wouldn't be worth repairing even if they could get the parts for such an old machine.
Is there a way to wipe the hard drive and make my data irretrievable before disposing of the computer?
If there's no way to wipe the hard drive, I'd like to find out: (1) How to remove the hard drive. (2) The best way to destroy the hard drive or at least make it forever unreadable (can my shredder eat it?). (3) The correct way to dispose of a Powerbook that has heard the Chimes of Death. (From what the repair service says, I assume nobody would want it as a donation.)

Turtlewiz,
I would not be so quick to pronounce it dead:
http://docs.info.apple.com/article.html?artnum=14438
I would try the suggestions in the above article. Will it boot to a CD?
As far as wiping the drive, it is easy as long as you can see a display so you can follow the steps necessary. You just open Drive Setup in the Utilities Folder on the CD > select 'zero all data' in the Initialization Options; do it a few times if concerned.
Removing the HD is relatively easy: Just lift off the keyboard and the heat sink, then remove the HD.
http://www.ifixit.com/Guide/3.0.0.html
Hit the HD a few times with a hammer and nobody will bother with it...it has a glass platter.
Nothing to offer on the recycling except Good Will may still take it as "non-working" since there are Mac users looking for such bargains.

How can I erase the data on my 2009 macbook pro that won't turn on because of a faulty motherboard? Do I just remove the hard drive, install it in a working mac, and erase it that way?

How can I erase the data on my 2009 macbook pro that won't turn on because of a faulty motherboard? Do I just remove the hard drive, install it in a working mac, and erase it that way? Thanks.

You put the internal drive in an enclosure. If you choose to keep the drive, you don't need to erase it.
(110687)

Hello, My computer crashed, I removed the hard drive and installed it into a hard drive enclosure and now I am trying to get my Thunderbird data off of it

Hello,
Thank you for taking a look at my problem. My Windows computer crashed so I removed the hard drive and installed it into a hard drive enclosure and connected it to my new Windows computer with a USB cord. I installed Mozilla Thunderbird on my new computer and read the different tutorials on this website for extracting data from the external hard drive and installing it on my new computer however I cannot seem to be able to find the files that I need and quite frankly I do not know how to move them once I do find them. I even tried MozBackup but it could not find the files either. I searched for profiles.ini in the hard drive and the only hit I got was a profiles.ini file that was 111 bytes in size. I assumed that this was not what I was looking for but I did save a copy on my desktop. If someone has experience with moving files from a hard drive to a new computer I would be grateful for the help.
Thanks,
AN

lets get with the program. Mozbackup is useless in this situation because it looks for your profile in the location Thunderbird says it is.
You biggest hurdle is probably setting windows to show system and hidden files. The %appdata% folders are hidden by windows.

How can I remove the hard drive from an iMac g4 before recycling it?

How can I remove the hard drive from an iMac g4 before recycling it?

There are take-apart guides online. For example
http://www.xlr8yourmac.com/systems/imac_g4/imacg4_takeapart.html
However, you can also consider securely erasing the hard drive instead. You can do this using a Mac OS X installation disc with a version that your iMac G4 can boot from the optical drive. If this is a viable option, please post back (include Mac OS X version on installation disc).

I have a late 2008 Macbook Pro last updated to Mavericks OS. The screen died and it's not worth replacing. How do I remove the hard drive and use a drive sled to access info I need?

I have a late 2008 Macbook Pro last updated to the Mavericks OS. The screen died and I took it into an Apple store and was told replacing the screen and the hardware to repair everything would cost almost as much as buying a new laptop or a cheaper model. I was told that I can use a drive sled to access data I need on my hard drive. How do I remove my hard drive and use a drive sled to get to the information I need? What makes matters more complicated is I need to update my iPhone and my iTunes/App store purchases. How can I accomplish this?
My wife has a late 2008 Macbook Pro as well, which I am assuming I need to run my hard drive. Is there a way to just access just my hard drive without interfering with hers?
I know this is lengthy. Thanks to whoever looks at this and offers advice/instruction.

the device you need is an External enclosure for a 2.5" (laptop form factor) SATA drive.
A USB-interface enclosure will be slow, but is adequate for this task and for re-purposing as a backup drive later. A firewire-interface drive would be faster, but is harder to find, more expensive, and faster than needed for this purpose.
The drive will mount as an "extra" drive on your wife's Macbook, and you can drag and drop whatever you wish. You could create a separate Account for yourself on her computer, and use Migration Assistant or just copy your stuff over to the new account. Then it would not interfere with her files.

How can I erase (or remove) the hard drive from a dead Time Capsule?

How can I erase (or remove) the hard drive from a dead Time Capsule?

I found this having had the same problem...
http://forums.macrumors.com/showthread.php?t=553818
Having removed the hard drive I'm finding I can't reformat it. I manage to mount the HD but Disk Utility crashes when trying to format (HD attached to Mac via Newer Tech. SATA cables to USB) and causes what I think is a kernal panic on my Mac which hard crashes. I see 3 partitions when attempting to mount one of which is AFP. Anyone got any ideas about how to do this? I've dug around but the only progress I've made is to note others have had to work around ACL's when replacing the logic board of the TC. Not sure if this even relates to the problem. However the tool for doing this seems to have been removed from SL. (Forum references to this procedure all relate to 10.5).

How big a internal hard drive can I install in a G5 Powermac

Model Name:          Power Mac G5
Model Identifier:          PowerMac11,2
Processor Name:          PowerPC G5 (1.0)
Processor Speed:          2 GHz
Number Of CPUs:          2
L2 Cache (per CPU):          1 MB
Memory:          4.5 GB
Bus Speed:          1 GHz
Boot ROM Version:          5.2.7f1
How big a internal hard drive can I install in a G5 Powermac

2.1 TB for certain & some 3 TB drives work if Partitioned to less than 2.1 TB but then it must be GUID instead of APM, most important is if it is SATA I 1.5Gb/sec compatible.

Is it possible to remove my hard drive from the Macbook and install it in a new Macbook Pro?

I currently have a 2009 Macbook and am wanting to upgrade to a new Macbook Pro. I have upgraded my hard drive in the macbook to a 500gb and have a duel boot with Windows 7 installed with Boot Camp along with other software that I do not want to lose. Is it possible to remove my hard drive from the Macbook and install it in a new Macbook Pro?

A much better solution is to hook your two Mac together and the first time you start the new Mac and it asks if you wish to recover data from another Mac, answer yes. This will invoke Setup Assitant which will do the job for you but intelligently.
I know because I just used Setup Assitant. It worked like a charm.
Allan

How to move the photos from my boot drive to a newly installed hard drive?

- regarding iPhoto's storage, etc.... Where is the iPhoto library located anyway? And - how to transfer it to the brand new hard drive?
I want to add a ned hard drive just to keep the media there, so I would like to transfer all the GBs worth of photos (the whole iPhoto library or - what folder, really?).
What do I need to do in order to accomplish this task?, and assuming that there is no problem moving all the photos (as I understand it would mean Originals, Modified & Data) - can I then just delete the original iPhoto Library (but from where?) somewhere on my boot drive?
Basically - I want to move all the photos from my boot drive to the newly installed hard drive, and after a successful move, I'd like to delete all the same photos from its original location (the boot drive).

One addition to Larry's steps: make sure the external drive is formatted OS X Extended (journaled) and have it set to ignore ownership as seen here:
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
Note: There's now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

How to install hard drive into mac pro

how to install hard drive into mac pro

I recently bought a new 2TB internal sata drive for my Macpro.
The installation was easy, but I'm not sure what to do next.
For one, should I partition the drive?
My purpose for buying the drive was to use it as my go to drive for Parallels. I used to run my music studio on Windows based machines, and my older project files require a windows OS to recover. I installed Parallels so I can have my studio running Mac and Windows programs which will enable me to access my old project files and take them into my newer Protools system.
So now, I've installed my new hard drive, but I'm not sure if I should partition it....And!? I'm not sure how to designate that drive for my virtual pc on Parallels. I was able to allocate enough disk space to parallels in order to load my music software, but at this point, I'm not sure if I've just promised it disk space from my original partitioned drive (which only has about 350 GB left on it).
I would love to be able to make one internal drive available for Parallels, and the other available for the rest of my OSX. When I use Parallels, I still would like to save some extra information on the 2TB drive as well from my dekstop running OSX.
I hope this makes sense! Your help is much appreciated!

How do I remove files from my Time Machine Backup and then how to exclude external hard drives from Time Machine?

How can I remove external hard drives from the Time Machine and exclude them in the future?

For deleting backups from Time Machine: http://pondini.org/TM/12.html
For excluding things from backups: http://pondini.org/TM/10.html
For general Time Machine advice (all courtesy of Pondini): http://pondini.org/OSX/Home.html

I need to remove the hard drive from my old Imac before i recycle. how do I do that?

How do I remove the hard drive from my old imac befor I recycle it?

ifixit.com has picture-guides for most anything Mac. Others say "not a user-capable operation", but ifixit does not hold back the guide for such reasons.

I remove my hard drive from time machine,now it won't recognize hard drive

i got a delayed error on my time machine backup saying Time Machine couldn’t complete the backup to my back up hardrive, so what i did i removed my hard drive in time machine "select disk" , thinking if ill plug it back it'll recognize but it didn't.. now it wont show anymore on my time machine, but it shows on my mac computer and disk utility.. how do i fix this? please help... i have the late macbook pro 2010 running osx mountain lion

Try repairing it:
Open Disk Utility in the Utilities folder. Select your Time Machine drive in the list on the left. Click on the First Aid tab in DU's main window, click on the Repair Disk button.

How to remove/install hard drive?

Similar Messages

Maybe you are looking for