How to remove legacy exchange servers. exchange 2013

hello I recently tried to create a DAG and it failed so i decided to remove the DAG and also the new server i created for it.
however now on my main production exchange server i still have legacy things left over from the server i deleted.
for instance Get-ExchangeServer command will bring up my current server and the old ones as well.
what i want to know is how do i clear our out all traces of the older servers?
many thanks

Here's a good article to refer to remove Exchange 2013:
http://blog.dargel.at/2012/11/20/complete-remove-exchange-2013-using-adsiedit/
for 2007 and 2010:
http://thlnk3r.wordpress.com/2013/04/17/how-to-remove-legacy-exchange-servers-using-adsiedit-tool/
Thanks, MikeV MCSE 2012

Similar Messages

How to remove / uninstall Exchange 2013 Microsoft Document.

Dear Support,
We have just finished a complete migration from Exchange 2013 to Office 365 Exchange Plan.
Our on-premise Exchange 2013 has been powered off for the last three weeks and we are now ready to proceed and remove and delete Exchange 2013 from our Windows 2012r2 domain.
Our domain is as follows :
Windows 2012r2 ( 2 x Domain Controllers)
Exchange 2013 ( 1 Server with around 80 mailboxes and some PF)
I cant seem to find an official Microsoft guide on "How to remove Exchange 2013 completely"
Once again my exchange server still has all of its database etc, we have simply power it off and are ready to uninstall it, I just a MS Guide to follow, I've seen loads of various posts but no official instructions.
Cheers
Roger

Hi Roger,
Thank you for your question.
By you state, Exchange 2013 has been powered off for the last three weeks, so we think message flow and PF have no problem on office 365. We could refer to the following link to remove Exchange 2013:
https://technet.microsoft.com/en-us/library/ee332361(v=exchg.141).aspx
Notice: This is a link which is about Exchange 2010, but it also apply to Exchange 2013.
If there are any questions regarding this issue, please be free to let me know.
Best Regard,
Jim
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Jim Xu
TechNet Community Support

How to uninstall first exchange 2013 server

I have an existing exchange 2010 SP3 organization. I am planning to install Exchange 2013 RTM on a production server
to try it out.
Can I easily uninstall the exchange 2013 completely after I am finished ? Is it just a matter of control panel/ add remove programs?
Anand_N

Hi Anand,
Before you remove the first Exchange Server computer in the site, I would like to clarify the following thing:
If there are any users or public folders (non-site) homed on this Exchange Server computer, you must move the mailboxes to another server in the site, and you must replicate any public folders to other servers in the site, to ensure that you do not lose
data.
Hope it helps.
Best regards,
Amy
Amy Wang
TechNet Community Support

How to Remove 2003 Exchange Servers from Organisation

All,
I have 2 old Exchange 2003 servers in my organisation which I want to remove. If I uninstall Exchange via Add / Remove programs does that completely remove them from the organisation or is there anything else I need to do??
Many thanks
James

Hi
Yes you just need to cleanly uninstall Exchange from those two servers. The uninstall process will check if there are any objects that need to be removed or transferred.
Steve

How to remove stubborn shared servers/pcs?

Hello! So I recently got my first Mac about a month or two ago and have thouroughly enjoyed the experience thus far, even if it is a cheap refurbished iBook G4. It is a bit difficult navigating in this Intel based world now-a-days but I have been able to work around and make sacrifices as far as software is concerned.
The only real problem I have ran into is that there is a shared computer in the Finder that is named 'Connie'. I am sure this is due to it being previously owned and I have a suspicion that this server belongs to a buisness. I am able to access the server as a guest and read/write files. My real concern is whether or not they have access to my computer and also how do I go about removing this from my shared computers? I have tried all of the basics, I have removed plists, I have tried to drag it away, I have tried ejecting it, but to no avail.
Any help would be appreciated! Thanks!

To stop anybody seeing your files, turn off File Sharing in System Preferences>Sharing.
If you disconnect from the Internet does "Connie" disappear?

How to remove OCS and install lync 2013 on MS Office 2007 and 2010

Hi,
We need to install lync 2013 on our systems having office 2007 and 2010 via SCCM 2012.
Please suggest.
Regards, Syed Fahad Ali

Lync 2013 no longer has its own installer, but instead uses the Office installer. You can create a customized installation and deploy it just like you do with Office:
http://technet.microsoft.com/en-us/library/jj204827.aspx
I hope that helps,
Nash
Nash Pherson, Senior Systems Consultant
Now Micro -
My Blog Posts
If you've found a bug or want the product worked differently,
share your feedback.
<-- If this post was helpful, please click "Vote as Helpful".

How to get a summarized mail traffic report in exchange 2013

Hi all
How to calculate the exchange 2013 SMTP mail traffic in terms of hour,day,month,top senders,largest message and top recipients list . Same time we would like to have those summarized mail traffic report for all the mailbox servers in the form of graphical
view as well as in a csv file ?
Please all of us share your thoughts and possibilities .
Regards
S.Nithyanandham
Thanks S.Nithyanandham

You may calculate hourly email traffic using "Message Tracking Logs and Log Parser".
I would like to refer you on this well explained article that will assist you step-wise to implement in your working environment : http://exchangeserverpro.com/calculate-hourly-email-traffic-using-message-tracking-log-parser/
Moreover, if you wish to achieve this goal automatically, you may also consider on this automated application (http://www.exchangereports.net/) that provides a deep-view of email traffic report in real time at
granular level.

Exhcange 2003 on a 2003 server to exchange 2013 on a 2012 server - problems...

Hi
I removed my 2003 exhcange server physically and installed a 2012 server with exchange 2013 on it.
How do I get it to work? Where do I manage the exh 2013 server, through web interface only?
It installed, and worked for a few days (after i first had to remove the 2003 exchange server).
Now i only get "done" in the web interface after loggin in, outlook does'nt find the server when trying to connect to accounts and i can't access it through powershell (exchange management shell) and the Exchange Toolbox does not work neither... The
services are running though, but that's about it.
It won't uninstall cause there is mailboxes etc on the mailbox database..
My servers are on a standalone network, cut of from the internett..
How do I get a clean slate to install echange from scratch?? We only have a few users, so they won't mind..
Any help would be appreciated.. As of now, the server does nothing...

Hi andjohnsen,
What error did you get when you access it through EMS (exchange management shell)?
In addition, I recommend you remove all the exchange 2003 residual information and check if any helps:
Remove (legacy) Exchange server using ADSIEdit
Best regards,
Niko Cheng
TechNet Community Support

Introduction of New OAB Architecture in Exchange 2013 and Some General Troubleshooting methods

Exchange 2013 is different from previous versions of Exchange server on architecture, some of the old features have been changed. In this FAQ, I will demonstrate the changes on OAB and list a common issue for your reference.
[Agenda]
1. Differences between Exchange 2007/2010 OAB and Exchange 2013 OAB
a. Generation
b. Distribution
c. Download
2. Common issue and troubleshooting
3. More information
[Difference between Exchange 2007/2010 and Exchange 2013 on OAB]
As we know, OAB in Exchange 2007/2010 has 3 points, OAB files generated from MBX server, distributed to CAS server and downloaded to Outlook client. However in Exchange 2013, these 3 points have a little different from previous servers. For example, the OAB
Distribution process doesn’t depend on Microsoft Exchange File Distribution service anymore. Now let me show you the changes of OAB in Exchange 2013.
[OAB Generation]
====================
Exchange 2007/2010:
1. OAB generation server is the specific MBX server which has –server property.
2. If MBX01 is down, OAB generation will be affected.
3. Previous Server using Microsoft Exchange System Attendant service for OAB generation.
4. OAB generation is a scheduled process. By default, OAB files generated at 5:00AM every day.
5. The OAB files which generated from MBX server are located in following path:
C:\Program Files\Microsoft\Exchange Server\V15\ClientAccess\OAB\GUID folder
Exchange 2013:
1. OAB generation server is the MBX server that hosts a special type of arbitration mailbox, called organization mailbox. Thus, the same OAB files could be generated from multiple
MBX servers.
2. If one of the MBX server down, other MBX server still have the ability to generate the specific OAB files.
3. Exchange 2013 server using OABGeneratorAssistant for OAB Generation.
4. OAB generation is a throttled process. It depend on the Server workload.
5. The OAB files which generated from MBX server are located in following path:
C:\Program Files\Microsoft\Exchange Server\V15\ClientAccess\OAB\GUID folder
[OAB Distribution]
====================
Exchange 2007/2010:
Previous Servers use Microsoft Exchange File Distribution service to distribute OAB files from MBX server to CAS server. The distributed oab files stored in CAS server.
Exchange 2013:
The OAB files doesn’t distributed to CAS server. The OAB files only stored in MBX server.
[OAB Download]
====================
Exchange 2007/2010:
If Autodiscover works fine, Outlook should use OAB URL to get the OAB files and download it.
If Autodiscvoer doesn’t work, authenticated users can also get the OAB from the CAS server local disk.
Exchange 2013:
Microsoft Exchange File Distribution service has been removed from Exchange 2013 and the OAB files stored in MBX server. CAS server will proxy all OAB download requests to the appropriate MBX server.
Outlook also use Autodiscover to get the OAB URL and download it.
[Common issue and Troubleshooting]
Issue: Outlook doesn’t download OAB files automatically. When I try to manually download OAB, get this error: Task xxx reported error (0x80190194): The operation failed.
Troubleshooting:
1. First, please run following command to check the information of OAB Generation Server.
Get-Mailbox -Arbitration | where {$_.PersistedCapabilities -like “*OAB*”} | ft Name, Servername, Database
Example result as below:
2. Please make sure the authentication settings and URLs are set properly.
3. Try to verify whether the OAB files generated from MBX server successfully. Path as below:
C:\Program Files\Microsoft\Exchange Server\V15\ClientAccess\OAB\GUID folder
4. If all of the settings above set correctly, please try to check Autodiscover. Run “Test E-mail Autoconfiguration” to check whether there is anything abnormal on OAB. If has, please search the error code on MS official documents.
5. If this issue is related to local cache, please try to delete the OAB caches from local PC and re-download OAB for testing. Path as below:
C:\Users\Administrator.CU1(different)\AppData\Local\Microsoft\Outlook\Offline Address Books
[More information]
http://blogs.technet.com/b/exchange/archive/2012/10/26/oab-in-exchange-server-2013.aspx
http://blogs.technet.com/b/exchange/archive/2013/01/14/managing-oab-in-exchange-server-2013.aspx
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Hi Techy,
According to your description, I am still not quite sure about your environment. Could you please provide more information about it, such as:
1. How many Exchange servers in your coexistence environment? One Exchange 2010 with all roles and one Exchange 2013 with all roles? Or several Exchange 2010 and multiple Exchange 2013?
2. Are there two sites in your environment? What’s the Exchange deployment in different sites?
3. Please confirm if both Exchange 2010 and Exchange 2013 are Internet-facing.
Additionally, if you are using different namespaces for different services for internal access and external accessing, we need to include all service namespaces in your certificate with IIS service. Personal suggestion, we can follow ED Crowley’s suggestion
to use split-brain DNS in your environment and only use the same namespace for Exchange service URLs.
The following article described the details about how to configure different namespace for Exchange services by using Load Balance in Exchange 2013:
http://www.msexchange.org/articles-tutorials/exchange-server-2013/high-availability-recovery/introducing-load-balancing-exchange-server-2013-part2.html
Regards,
Winnie Liang
TechNet Community Support

Uninstalling/reinstalling exchange 2013 in hybrid environment

Hello guys,
We have exchange 2007 SP3 servers, Exchange 2013 CU3 with all
rules (no DAG) server and Office 365 .
Exchange 2013 CU3 servers were
installed initially only for office 365 migration needs. They configured as
hybrid servers.
No, after the migration I would like to install Exchange 2013
servers with DAG.
I am going to install 2 new servers with only Mailbox
role on Windows 2008 R2 enterprise.
Also, I will upgrade current Exchange
2013 CU3 to CU7.
Later after making sure everything is ok, I am planning to
remove mailbox role from these hybrid servers. Unfortunately, in order to do it,
exchange should be removed and re-installed with only client rule.
Will it
remove or change significantly hybrid configuration? Is there any manual how to
remove\reinstall exchange without changing hybrid config?
Second question: Are any issues with CU7 and it's better to stay with CU3? I prefer to upgrade since all the users who still not migrated to Office 365, are located on Exchange 2007. So it will be easier to do it now than later after migration
Please assist

Allen,
I uninstalled exchange and installed only client role on two servers and updated deleted settings on virtual directories. Needed to recreate arbitration mailbox and OAB. Everything is ok. hybrid config was not touched since I uninstalled exchange and reinstalled
it on servers one by one.
I configured WNLB for two client servers and configured its VIP hostname on outlook anywheree configuration- it's working. Since it's better to configure load balance with layer 7 and not 4, I will wait for F5 guy to create related VIP for me.
<textarea style="height:80px;width:444px;border:1px solid grey;padding:2px;"></textarea><select><option value="af">Afrikaans</option><option value="sq">Albanian</option><option value="ar">Arabic</option><option
value="hy">Armenian</option><option value="az">Azerbaijani</option><option value="eu">Basque</option><option value="be">Belarusian</option><option value="bg">Bulgarian</option><option
value="ca">Catalan</option><option value="zh-CN">Chinese (Simplified)</option><option value="zh-TW">Chinese (Traditional)</option><option value="hr">Croatian</option><option
value="cs">Czech</option><option value="da">Danish</option><option selected="selected" value="auto">Detect language</option><option value="nl">Dutch</option><option
value="en">English</option><option value="et">Estonian</option><option value="tl">Filipino</option><option value="fi">Finnish</option><option value="fr">French</option><option
value="gl">Galician</option><option value="ka">Georgian</option><option value="de">German</option><option value="el">Greek</option><option value="ht">Haitian
Creole</option><option value="iw">Hebrew</option><option value="hi">Hindi</option><option value="hu">Hungarian</option><option value="is">Icelandic</option><option
value="id">Indonesian</option><option value="ga">Irish</option><option value="it">Italian</option><option value="ja">Japanese</option><option value="ko">Korean</option><option
value="la">Latin</option><option value="lv">Latvian</option><option value="lt">Lithuanian</option><option value="mk">Macedonian</option><option value="ms">Malay</option><option
value="mt">Maltese</option><option value="no">Norwegian</option><option value="fa">Persian</option><option value="pl">Polish</option><option value="pt">Portuguese</option><option
value="ro">Romanian</option><option value="ru">Russian</option><option value="sr">Serbian</option><option value="sk">Slovak</option><option value="sl">Slovenian</option><option
value="es">Spanish</option><option value="sw">Swahili</option><option value="sv">Swedish</option><option value="th">Thai</option><option value="tr">Turkish</option><option
value="uk">Ukrainian</option><option value="ur">Urdu</option><option value="vi">Vietnamese</option><option value="cy">Welsh</option><option value="yi">Yiddish</option></select>⇄<select><option
value="af">Afrikaans</option><option value="sq">Albanian</option><option value="ar">Arabic</option><option value="hy">Armenian</option><option value="az">Azerbaijani</option><option
value="eu">Basque</option><option value="be">Belarusian</option><option value="bg">Bulgarian</option><option value="ca">Catalan</option><option value="zh-CN">Chinese
(Simplified)</option><option value="zh-TW">Chinese (Traditional)</option><option value="hr">Croatian</option><option value="cs">Czech</option><option value="da">Danish</option><option
value="nl">Dutch</option><option value="en">English</option><option value="et">Estonian</option><option value="tl">Filipino</option><option value="fi">Finnish</option><option
value="fr">French</option><option value="gl">Galician</option><option value="ka">Georgian</option><option value="de">German</option><option value="el">Greek</option><option
value="ht">Haitian Creole</option><option value="iw">Hebrew</option><option value="hi">Hindi</option><option value="hu">Hungarian</option><option value="is">Icelandic</option><option
value="id">Indonesian</option><option value="ga">Irish</option><option value="it">Italian</option><option value="ja">Japanese</option><option value="ko">Korean</option><option
value="la">Latin</option><option value="lv">Latvian</option><option value="lt">Lithuanian</option><option value="mk">Macedonian</option><option value="ms">Malay</option><option
value="mt">Maltese</option><option value="no">Norwegian</option><option value="fa">Persian</option><option value="pl">Polish</option><option value="pt">Portuguese</option><option
value="ro">Romanian</option><option selected="selected" value="ru">Russian</option><option value="sr">Serbian</option><option value="sk">Slovak</option><option
value="sl">Slovenian</option><option value="es">Spanish</option><option value="sw">Swahili</option><option value="sv">Swedish</option><option value="th">Thai</option><option
value="tr">Turkish</option><option value="uk">Ukrainian</option><option value="ur">Urdu</option><option value="vi">Vietnamese</option><option value="cy">Welsh</option><option
value="yi">Yiddish</option></select>
English (auto-detected) » Russian

Migrating AD Exchange 2013 Objects to a new AD Domain

I have a client 'new company' (NC) who is splitting from the 'parent company' (PC). They are using a 3rd party tool to conduct the AD migration/split.
The PC AD domain is on Windows 2012 Servers and has trust relationship with the NC AD domain also running on windows 2012 server. The users and computers have been successfully migrated/stubbed to the NC domain, however, the Exchange 2013 objects
are not migrating over to the NC AD domain using the 3rd party AD migration tool.
Question, does any one have suggestions on how to migrate the exchange 2013 objects from the PC AD to the NC AD ?
What techniques can be used ?
Thanks in advance
RK

What 3rd party tool are you using and have you contacted their support already? You can use the native tools to migrate mailboxes (I do all the time) but I wouldn't try and mix the native tools and a 3rd party tool on the same migration unless I was sure
what the end result would be.

Move mailboxes and public folders from exchange 2007 to Exchange 2013

1. How do i move mailboxes from exchange 2007 to exchange 2013. I have more than 1000 mailboxes.
What is the correct way to migrate. do i need to move a single mailbox. During migration do the mailboxes get corrupted
2. I want to move public folders from Exchange 2007 to Exchange 2013.
I ran powershell commands and got these results please do guide me how to move to exchange 2013.and what are the shell commands
Get-publicfolder
Name Parent Path
IPM_SUBTREE
Get-publicfolder | select AdminDisplayName,FolderPath
AdminDisplayName FolderPath
Get-PublicFolderStatistics | select AdminDisplayName,FolderPath
AdminDisplayName FolderPath
exchangeV1 schema-root\microsoft\exchangeV1
Internet Newsgroups Internet Newsgroups
Get-PublicFolder -Recurse | fl name,replicas > c:\publicfolder.txt
Name : IPM_SUBTREE
Replicas : {}
Name : Internet Newsgroups
Replicas : {MAIL\Public Folder Storage\Public Folder Database}

I have started moving mailboxes , i have tried moving few individual mailboxes to see how things go
MAIL is my exchange 2007 and MAIL1 is my exchange 2013, please do refer the below result
PS] C:\Windows\system32>Get-MailboxDatabase -server mail
Name                           Server          Recovery
ReplicationType
Mailbox Database               MAIL            False           None
[PS] C:\Windows\system32>Get-MailboxDatabase -server mail1
Name                           Server          Recovery
ReplicationType
Mailbox Database 1460777952    MAIL1           False           None
[PS] C:\Windows\system32>New-MoveRequest -Identity '[email protected]' -TargetDatabase "Mailbox Database 1460777952"
DisplayName               StatusDetail              TotalMailboxSize
TotalArchiveSize         PercentComplete
[email protected]          Queued                    363.6 MB (381,217,115 ...
0

What happened to the sent items configuration in Exchange 2013?

Why is Set-MailboxSentItemsConfiguration
removed from Exchange 2013? It was a really useful feature... Does anyone know if it will reappear? I know I can make a gpo and roll out the DelegateSentitemsStyle but I prefer using the setting in Exchange.

Hi,
The feature is removed from Exchange 2013, currently, there is no official document about when this feature will be re-introduced again.
As a workaround, we can edit it via registry.
1) Click Start, click Run, type regedit, and then click OK.
2) Locate and then click the following registry subkey:
HKEY_CURRENT_USER\Software\Microsoft\Office\Version\Outlook\Preferences
Note: the version depend on which version of Outlook we are using. Outlook 2010 is version 14, Outlook 2013 is version 15.
3) On the Edit menu, point to New, and then click DWORD Value.
4) Type DelegateSentItemsStyle, and then press ENTER.
5) Right-click DelegateSentItemsStyle, and then click Modify.
6) In the Value data box, type 1, and then click OK.
7) Exit Registry Editor.
We should note that only the cached mode will work fine with this workaround. The DelegateSentItemsStyle registry value will not work consistently on an Exchange account that is configured in Online mode.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Belinda Ma
TechNet Community Support

Exchange 2013 CU7 OWA 400 Bad Request after successful login

Scenario:
Exchange 2007/2013 Migration
One
Exchange 2007 Server [removed]
One
Exchange 2013 Server Std, Windows 2012
All mailboxes moved to 2013
- November 27-30 2014
All public folders moved to
2013 - December 2, 2014
Exchange
2007 is still running and has not been removed from the domain, yet. [update]
Exchange
2007 removed from domain - 12-13-14
SSL
Certs are current for: Autodiscover.ExtDom.com, ex13.ExtDom.com, ex13.IntDom.com
Applied
CU6 (Dec 3, 2014) to fix Mobile access issues. Since applying CU6, OWA does not work with the exception of mobile browsers (Chrome - Nexus 7) or Safari 5.1.7 on Windows 7. These browsers get the OWA 2010 theme (Yellow).
User
logs into OWA with Domain\UserName and PWD(IE). After clicking Sign In, page returns Bad Request. No errors logged in w3scv logs.
[update]
CU7 applied 12-11-2014
All
users can connect using Outlook 2013 or Mobile (iPhone & Android)
Exchange
Admin Center (ECP) still works!
Browsers
tested: IE10 (windows 7 x64),Chrome 39.0.2171.71m, Opera 26.0, FireFox 34.0.5, Safari 5.1.7
Attempted:
https://ex13.ExtDom.com/owa
https://ex13.IntDom.com/owa
https://ex13.ExtDom.com/owa?ExchClientVer=15
https://ex13.IntDom.com/owa?ExchClientVer=15
https://localhost/owa
(on Ex 2013 server)
https://localhost/owa?ExchClientVer=15
(on Ex 2013 Server)
Fixes
attempted:
remove
| create Virtual Directories for OWA
Change
authentication through Exchange PowerShell - Integrated/Basic from FBA/Basic
reverted
since change didn’t work.
Run
UpdateCas.ps1
Run
UpdateConfigFiles.ps1
IISReset
(iisReset /NoForce fails)
OWA
(Default Web Site) displays as Version 15.0 (Build 995.29) in EAC. [update] Build 1044.25 (CU7)
Links
used for troubleshooting:
http://community.spiceworks.com/topic/514617-exchange-2013-unable-to-login-to-owa-ecp
https://social.technet.microsoft.com/Forums/ie/en-US/f8aa95d4-19e4-483c-8c4b-b039ab0d0127/400-bad-request-when-logging-in-to-owa-exchange-2013?forum=exchangesvrclients
http://tecfused.com/2013/09/23/exchange-2013-ecp-double-login-error-400/
https://social.technet.microsoft.com/Forums/lync/en-US/c25ce81c-76ea-471a-93ae-eeaf9e5015ac/exchange-2013-owa-error-400-bad-request?forum=exchangesvradmin
http://support.microsoft.com/kb/2871485/en-gb

Hi,
Does it work if you disable the FBA and only use the basic authentication?
Please also let us know the authentication settings on the Default Web site.
Thanks,
Simon Wu
TechNet Community Support

Load exchange 2013 module in powershell

Dear Exprt,
How would i load exchange 2013 module in powershell from windows 7 client
i have admin privilege i can work from provided web link but using this link cannot load exchange 2013 in powershell
$credential = get-credential
$session = New-PSSession -ConfigurationName Microsoft.Exchange -ConnectionUri https://exchange2013.micex.com/ -Credential $credential
Import-PSSession $session
i have tried by different ways by changing url (ConnectionUri https://exchange2013.micex.com/powershell/) also not able to load in powershll
[email protected]

Here is error
Althought i enter in this (-ConnectionUri
https://exchange2013.micex.com/POWERSHELL)
New-PSSession : [exchange2013.micex.com] Connecting to remote server exchange2013.micex.com failed with the
following error message : The WinRM client cannot process the request because the server name cannot be resolved. For more information, see the
about_Remote_Troubleshooting Help topic.
At line:2 char:12
+ $session = New-PSSession -ConfigurationName Microsoft.Exchange -ConnectionUri ht ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotingTransportException
    + FullyQualifiedErrorId : ComputerNotFound,PSSessionOpenFailed
Import-PSSession : Cannot validate argument on parameter 'Session'. The argument is null. Supply a non-null argument and try the command again.
At line:3 char:18
+ Import-PSSession $session
+                  ~~~~~~~~
    + CategoryInfo          : InvalidData: (:) [Import-PSSession], ParameterBindingValidationException
    + FullyQualifiedErrorId : ParameterArgumentValidationError,Microsoft.PowerShell.Commands.ImportPSSessionCommand
[email protected]
try connectionuri
http://exchange2013.micex.com/powershell
instead of
https://exchange2013.micex.com/powershell
MCITP - Exchange 2010 | MCITP - Windows Server 2008 R2

How to remove legacy exchange servers. exchange 2013

Similar Messages

Maybe you are looking for