How to remove line between two raws in word template designing ?

Hi everbody,
Hope you are doing good.
i am designing report in word template.
i wandoring how to remove line between two raws ?
currently it gives me lines between each single raw.
i want to remove line between two raws.
any help is greatly appreciated.
Thanks.

Hi,
are the rows inside a table-structure? Perhaps the line are the borders of the table?
Regards
Rainer

Similar Messages

How draw a line between two buttons?

Hi.
I want to make two movable buttons connected with a line. When changing position of any button you'll change look of the line of course. I know how to draw a line but after MOUSE_DOWN, and I don't know how to remove an old one line, and how make this line to be shown all the time?
My code
btn2.addEventListener(MouseEvent.MOUSE_DOWN,
mouseDownHandler3);
btn2.addEventListener(MouseEvent.MOUSE_UP, mouseUpHandler3);
btn3.addEventListener(MouseEvent.MOUSE_DOWN, mouseDownHandler3);
btn3.addEventListener(MouseEvent.MOUSE_UP, mouseUpHandler3);
// Define a mouse down handler (user is dragging)
function mouseDownHandler3(evt:MouseEvent):void {
   var object = evt.target;
   // we should limit dragging to the area inside the canvas
   object.startDrag();
function mouseUpHandler3(evt:MouseEvent):void {
   var obj = evt.target;
      obj.stopDrag();
      //spisujemy x,y
      var x2Pos:Number = btn2.x;
      var y2Pos:Number = btn2.y;
      var x3Pos:Number = btn3.x;
      var y3Pos:Number = btn3.y;
      trace (x3Pos);
      trace (y3Pos);
      var roundObject:Shape = new Shape();
      roundObject.graphics.lineStyle(2, 0x990000, .75);
      roundObject.graphics.moveTo(x2Pos, y2Pos);
      roundObject.graphics.lineTo(x3Pos, y3Pos);
      this.addChild(roundObject);
      //this.removeChild(this.getChildAt(this.numChildren -1));
Source .FLA: http://www.mediafire.com/?y2tyzz4zxun

Here's a solution that you can adapt for two or more buttons....
var btns:Array = [btn2, btn3]; //instances on stage
//set btn handlers
function setBtns():void {
      for(var i=0; i<btns.length; i++) {
            btns[i].buttonMode = true;
            btns[i].addEventListener(MouseEvent.MOUSE_DOWN, grab);
            btns[i].addEventListener(MouseEvent.MOUSE_UP, drop);
setBtns();
//draws lines btween all btns while a drag is occurring
function drawLines(e:Event=null):void {
      graphics.clear();
      graphics.lineStyle(2, 0xFF0000);
      graphics.moveTo(btns[0].x+(btns[0].width/2), btns[0].y+(btns[0].height/2));
      for(var j=btns.length-1; j>=1; j--) {
            graphics.lineTo(btns[j].x+(btns[j].width/2), btns[j].y+(btns[j].height/2));
//handlers
function grab(event:MouseEvent):void {
      event.target.startDrag();
      addEventListener(Event.ENTER_FRAME, drawLines);
function drop(event:MouseEvent):void {
    event.target.stopDrag();
    removeEventListener(Event.ENTER_FRAME, drawLines);
drawLines();

How to remove space between two fields in emergency primary contact.

How Can I remove a space between the two fields.IN emergency primary contact there are certain field called "C/O" and a i have added one text for this field inside that.But it is taking a big space between the "C/O" field and the text view.Plz suggest how I can re,move this?Also How Can I add new transparent container with the end user personalization in the emergency contact field.

Hi Peddi
In my structure pannel I have simpleSearchPanel below that only i have the two lov fields ex: emp_no and emp_name . how to set the spacer between this From which Region where can find the spacer bean what proerty do i need to set
Thanks
AT

PO Stylesheet How to remove space between two tables

Hi
I am building a rtf template for PO output for communication report in r12,there is a terms and conditions part and total amount part which comes at bottom of every page of the report. I have created that as a template and i call it in the footer.
The problem is there is always a gap between the lines table and the terms & conditions and total table,any idea's on how to resolve this issue will be very helpful.
Please let me know if any other input is required from my side.
Thanks in Advance

Are you trying to have the table where the lines are always be the same size no matter how many lines are present?
If so, you some choices:
1) If your lines are always the same height, you might get some ideas on what to do from this article:
http://oracle.anilpassi.com/xml-publisher-developing-reports-printed-on-pre-printed-stationary.html
2) If your lines vary in height, then you should look into a PDF template. This will give you a pre-printed stationary look in which the drawing of boxes and lines is not affected by the data content.
3) Other less attractive options are a) making the report in XSL-FO, and b) making a bitmapped RDF report
There is currently no solution that I am aware of for a pre-printed stationary look using an RTF template in which the data lines are of variable height.

How can I insert a vertical line between two underlined unfilled with text lines. I am trying to construct an invoice and I need a break. If I try any of the shapes or inset functions it eliminates my underlined lines and shifts the whole document.

I am trying to construct an invoice. How can I install a vertical line between two or more underlined lines to create a break. I have tried the insert, shapes and nothing works. If I try any of the functions the whole document shifts to the right and I loose some of the lines. Is there a work around, or is I work not able to do what I want?
Thanks
Armand

It sounds as though you may have "Object Causes Wrap" activated for the Line Shape. This will push other content away.
See the Wrap Inspector.
Jerry

How to pass parameters between two xterm windows?

Hi,
I would like to know how to pass parameters between two xterm windows where there are two independence processes running on them respectively ? Would appreciate if any one out there can advise me . Thanks.

Global variables can be used, but you can do what the online help
says ...
Parameters are passed to called forms by means of a parameter
list. A parameter list is a named programmatic construct that is
simply a list of parameter names (called keys) and their values.
You can pass parameter values to forms invoked by the built-in
subprograms CALL_FORM, OPEN_FORM, and NEW_FORM. In addition, you
can pass parameter values to other Oracle tools with the
RUN_PRODUCT procedure.
A parameter you include in a parameter list can be either a text
parameter or a data parameter. The parameter type determines how
its value is interpreted.
Text Parameters The value of a text parameter being passed to a
called product is a CHAR string that can represent the following:
n a user-defined form parameter defined in a form invoked
by the CALL_FORM, OPEN_FORM, or NEW_FORM built-in subprograms
n a command line or user-defined parameter for a product
invoked with the RUN_PRODUCT built-in subprogram
Data Parameters The value of a data parameter being passed to a
called product is always the name of a record group defined in
the current form. (A record group is a data structure that
stores records derived from a query or through programmatic
assignment.) Data parameters are used to pass data to products
invoked with the RUN_PRODUCT built-in subprogram. You cannot
pass data parameters to forms.
The following table shows the structure of a parameter list that
contains four parameters:
Key Paramtype Value
CITY Text_Parameter 'BOGOTA'
CATEGORY Text_Parameter 'EXPORTS'
MULTIPLIER Text_Parameter '.0275'
NEW_DATA Data_Parameter 'RECORD_GROUP8'
arun reddy (guest) wrote:
: im trying to do this but i could not find any way for this.
: can any one help me how can i pass parameters between two forms
: in forms4.5. any help will be appreciated
: thanks.
null

How to Persis session between two ear files

Can anybody tell me how to persists session between two ear files?
Please Help its urgent!!
Rahul

Rahul -- there's nothing as a J2EE spec requirement or even a proprietary feature of OC4J/OracleAS which will enable this.
If you have two different EAR files, then they are two different applications, and each will have their own session which can't be shared amongst each other.
If you have data which needs to be shared across different applications then you could either put it on a shared file system or write it to a database which you can then read from in the other application.
One way to do this is to implement the HttpSessionAttributeListener interface which will be called when object are added/removed/updated from a session, and then make a determination on whether the new object needs to be stored in a common place to facilitate sharing between applications.
This is more likely to be a hackaround and ideally you'd examine why you want to share session state across applications and rearchitect so you don't need to do it -- but if you want to try a solution without a major revisiting of the whole application, then perhaps it's an option.
cheers
-steve-
cheers
-steve-

How to pass data between two internal sessions using ABAP memory?

Hi,
How to pass data between two internal sessions using ABAP memory?
It would be fine if you could explain with an example.
And also let me clear about the data passing between two main sessions and two external sessions with specific examples.
Thanks.

Hi ,
check the example.
Reading Data Objects from Memory
To read data objects from ABAP memory into an ABAP program, use the following statement:
Syntax
IMPORT <f1> [TO <g 1>] <f 2> [TO <g 2>] ... FROM MEMORY ID <key>.
This statement reads the data objects specified in the list from a cluster in memory. If you do not use the TO <g i > option, the data object <f i > in memory is assigned to the data object in the program with the same name. If you do use the option, the data object <f i > is read from memory into the field <g i >. The name <key> identifies the cluster in memory. It may be up to 32 characters long.
You do not have to read all of the objects stored under a particular name <key>. You can restrict the number of objects by specifying their names. If the memory does not contain any objects under the name <key>, SY-SUBRC is set to 4. If, on the other hand, there is a data cluster in memory with the name <key>, SY-SUBRC is always 0, regardless of whether it contained the data object <f i >. If the cluster does not contain the data object <f i >, the target field remains unchanged.
In this statement, the system does not check whether the structure of the object in memory is compatible with the structure into which you are reading it. The data is transported bit by bit. If the structures are incompatible, the data in the target field may be incorrect.
PROGRAM SAPMZTS1.
DATA TEXT1(10) VALUE 'Exporting'.
DATA ITAB LIKE SBOOK OCCURS 10 WITH HEADER LINE.
DO 5 TIMES.
ITAB-BOOKID = 100 + SY-INDEX.
APPEND ITAB.
ENDDO.
EXPORT TEXT1
TEXT2 FROM 'Literal'
TO MEMORY ID 'text'.
EXPORT ITAB
TO MEMORY ID 'table'.
SUBMIT SAPMZTS2 AND RETURN.
SUBMIT SAPMZTS3.
The first part of this program is the same as the example in the section Saving Data Objects in Memory. In the example, the programs SAPMZTS1 and SAPMZTS2 are called using SUBMIT. You can create and maintain the programs called using the SUBMIT statement by double-clicking their names in the statement. For further information about the SUBMIT statement, refer to Calling Executable Programs (Reports)
Example for SAPMZTS2:
PROGRAM SAPMZTS2.
DATA: TEXT1(10),
TEXT3 LIKE TEXT1 VALUE 'Initial'.
IMPORT TEXT3 FROM MEMORY ID 'text'.
WRITE: / SY-SUBRC, TEXT3.
IMPORT TEXT2 TO TEXT1 FROM MEMORY ID 'text'.
WRITE: / SY-SUBRC, TEXT1.
Example for SAPMZTS3:
PROGRAM SAPMZTS3.
DATA JTAB LIKE SBOOK OCCURS 10 WITH HEADER LINE.
IMPORT ITAB TO JTAB FROM MEMORY ID 'table'.
LOOP AT JTAB.
WRITE / JTAB-BOOKID.
ENDLOOP.
The output is displayed on two successive screens. It looks like this:
and
The program SAPMZTS2 attempts to read a data object TEXT3 from the data cluster "text", which does not exist. TEXT3 therefore remains unchanged. The existing data object TEXT2 is placed in TEXT1. In both cases, SY-SUBRC is 0, since the cluster "text" contains data.
The program SAPMZTS3 reads the internal table ITAB from the cluster "table" into the internal table JTAB. Both tables have the same structure, namely that of the ABAP Dictionary table SBOOK.
Pls. reward if useful.....

How to separate data between two colons

Hi,
how to separate data between two colons?
ex: 'ABC:1234:1-ss-2:0:0:0:0-DEF:5678:0:0:0:0'
how to access these 1234, 5678 and 1-ss-2 ?
there may be any string.
please help

Hi,
The string 'ABC:1234:1-ss-2:0:0:0:0-DEF:5678:0:0:0:0' contains 11 colons, and 10 sub-strings that are between colons. How do you distinguish the ones you want,
(1) 1234
(7) 5678
(2) 1-ss-2
from the ones you don't want
(3) 0
(4) 0
(5) 0
(6) 0-DEF
(8) 0
(9) 0
(10) 0
Anyhow, in Oracle 10 (and up) you can easily get the n-th item from a :-delimited list by saying:
REGEXP_SUBSTR ( txt
              , '[^:]+
              , 1
              , n
              )First use REGEXP_REPLACE to remove anything before the first colon and anything after the last one.

Switching lines between two accounts.

How possible is it to switch lines between two different accounts i have to accounts with five lines and i would like to switch a number from one to another and one back. i.e. Number 123-456-7890 from Account A with Number 0987-654-321 from Account B.

hey i am on my grandma plan but i have my own how can i switch that account that i have on my grandma to mine

How to get relationship between two views in the reports

How to get relationship between two views in the reports, I am doing a deletion program , it is fully relates to views , how to get relationship between them in the reports

Hi,
Please explain your question in detail...what do you want to read ?
If you want to know about the navigation links between the views then you can use APIs like
wdComponentAPI.getComponentInfo().findInWindows("windowName").getViewUsageByID("Name").getNavigationLinks();
Iterate through the navigationLinkInfo from above collection and can read the other properties .
I haven't tried the above , but it should work !!!
Regards,Anilkumar

How can we navigate between two windows of same component in webdynpro ABAP

Hi
how can we navigate between two windows( not views ) of same component in webdynpro ABAP. its an urgent requirement
Thanks in advance.
Regards
Laeeq

Hi Laeeq,
You cannot navigate between windows of one component. You can only call a dialog box showing the contents of a second window, or you can embed the contents of a window of a different component.
Just add all the views you need to the one and only main window of the component.
Ciao, Regina

In jsp file, how to transfer parameter between two javabean?

In jsp file, how to transfer parameter between two javabean?
for example
Bean1 has a attribute A
Bean2 has a attribute B
how to transfer the value of A to B

Have you tried something like...
<jsp:setProperty name="Bean2" property="B" value="<jsp:getProperty name="Bean1" property="A" />" />

How to get space between two values in a single cell of a table.

hello,
how to get space between two values in a single cell of a table.
thanks a lot.
kailash.

sorry i got the answer.

Polar equation of a line between two points

I am trying to make a method to output the points (in polar coordinates (r, theta)) along a line between two given polar coordinates.
This will mimick the path of an object traveling across a radar screen.
Is this possible?

Java does not plot in polar coordiantes, you'll have to convert to rectangular to get a plot. If you're just doing a sweep on a screen, then it's fairly simple to do:
r is the radius of your screen,
(0,0) is your Origin translated as (Xmax/2, Ymax/2)
when you draw the line you just start at your Origin and get your end values as
X1=X0+r*cos(Theta) and
Y1=Y0+r*sin(Theta),
I've not seen, nor do I think there is any other support to do what you want--you have to convert to (x,y) coordinate system.
This will leave a ragged edge so make a border around your screen.
import java.awt.Color;
import java.awt.Dimension;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import java.awt.Graphics;
import java.awt.Graphics2D;
import java.awt.image.BufferedImage;
import java.awt.Point;
import javax.swing.JFrame;
import javax.swing.JPanel;
import javax.swing.Timer;
public class JRadar{
public JRadar(){
    JPanel p = new MyJPanel();
    JFrame f = new JFrame("ForumJunk: JRadar");
    f.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
    f.add(p);
    f.pack();
    f.setVisible(true);
public static void main(String[] args){
    new JRadar();
class MyJPanel extends JPanel implements ActionListener{
    Timer t = new Timer(10, this);
    Dimension d = new Dimension(512, 512);
    BufferedImage bi = new BufferedImage(d.width, d.height, BufferedImage.TYPE_INT_RGB);
    Graphics2D g = bi.createGraphics();
    double theta = 0;
    int r = d.width/2 - 16;
    Point origin = new Point(d.width/2, d.height/2);
    public MyJPanel(){
      g.setColor(Color.RED);
      this.setPreferredSize(d);
      t.start();
    public void actionPerformed(ActionEvent e){
      g.clearRect(0, 0, d.width, d.height);
      g.drawOval(16, 16, 480, 480);
      g.drawLine(origin.x, origin.y, (int)(origin.x+r*Math.cos(theta)), (int)(origin.y+r*Math.sin(theta)));
      theta += 0.01;
      if(theta>=Math.PI*2) theta = 0.0;
      repaint();
    public void paintComponent(Graphics g){
      super.paintComponent(g);
      g.drawImage(bi, 0, 0, this);
}Edited by: morgalr on Mar 3, 2010 4:59 PM: code example added

How to remove line between two raws in word template designing ?

Similar Messages

Maybe you are looking for