How to remove line space before/after paragraph in Photoshop Elements?

I am using Elements 12 and want to remove the extra spacing that is automatically inserted between paragraphs after a hard return. Is there some way to adjust the extra spacing before/after a paragraph in Elements?

Try resetting the tool (the little arrow next to four lines in the Text Options panel). Setting the leading manually works fine for me in PSE12 with hard carriage returns,
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

Similar Messages

How to organize photos in iPhoto after editing in Photoshop Elements?

Hello. This is my first post with this group. I have iPhoto set up to automatically go to Photoshop Elements (PE) for editing. That works just fine, but I have never learned an easy way to get edited images back into the original iPhoto folder (Event).
I've been flattening the layers in PE and saving as a JPEG or TIF to my desktop. Then I drag to iPhoto. I often make multiple versions of the same image and wish there was an easier way to get these versions into iPhoto, preferably into the same Event the original photo came from.
Is this possible? I also wish I didn't have to flatten because I want to be able to edit in layers again if necessary. I have about given up and have been storing non-flattened images elsewhere on the computer.
Thanks,
dgjtalkin

Welcome to the Apple Discussions. This may help:
Using Photoshop (or Photoshop Elements) as Your Editor of Choice in iPhoto.
1 - select Photoshop as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
NOTE: With Photoshop Elements 6 the Saving File preferences should be configured: "On First Save: Save Over Current File". Also I suggest the Maximize PSD File Compatabilty be set to Always.
If you want to use both iPhoto's editing mode and PS without having to go back and forth to the Preference pane, once you've selected PS as your editor of choice, reset the Preferences back to "Open in main window". That will let you either edit in iPhoto (double click on the thumbnail) or in PS (Control-click on the thumbnail and seledt "Edit in external editor" in the Contextual menu). This way you get the best of both worlds
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..

Leaving one line space before starting the text in smartforms

Hi,
I want to leave one line space before starting a text.
i LEFT one line space on the text node but it's not working.
eg: i need to print "Header text". Before printing this i need one line space. Created a blank node for space still not working. Can anyone help me on this.
Thanks,
Rose.

Hi Rose,
Enter a Line Feed in the Smartform Editor.
in the editor type as ,
"Header text"
where / is Line feed and * is a Default Paragraph Format.
Regards,
Balakumar.G.

Space before/after tables

Is there any way to eliminate the space before/after consecutive tables? I don't want to combine the tables, but would like them to appear as if my multiple tables are one. The problem now is that when you place two tables next to each other (inline) there is a 1/8" gap between the tables.
I have tried adjusting font preferences, but the only thing that changes is the text inside the table.

I'm afraid you have only the two choices. I imagine the reason for the spacing is to preserve the separateness of multiple tables and prevent accidental "collisions" and overlapping. You can always ungroup, rearrange, and regroup. When we want to do unusual things it's often with the penalty of extra work.
Walt

How to remove white space between two answer reports

How to remove white space between two answer reports
In Dashboard section I have 2 rqeuest. Each request renders Table View. When I display dashboard, it show white space separating the 2 table views. How do I get rid of the white space/white band ?

See this link
Re: Eliminating the space between two reports in OBIEE dashboard page Section
Regards,
Sandeep

How to remove ghost space on Camera Roll under Usage. No photos on camera. 545MB shown on Camera Roll and 1.8MB on Photo Stream

How to remove ghost space on Camera Roll under Usage. No photos on camera. 545MB shown on Camera Roll and 1.8MB on Photo Stream?
Trying to clean up space to download updated iOS. Thanks!
Have tried unsuccessfully the left swipe and pressing the red delete. No change.

The only problem is I have only 1.6GB available and need 3.7 to update to the iOS7. I also have 2.6GB in the "Other" catagory. How do I access the "Others" area in iTunes in order to see what is there and what I might be able to delete in order to create the amount of space needed. Thanks for your help!

How to remove line between two raws in word template designing ?

Hi everbody,
Hope you are doing good.
i am designing report in word template.
i wandoring how to remove line between two raws ?
currently it gives me lines between each single raw.
i want to remove line between two raws.
any help is greatly appreciated.
Thanks.

Hi,
are the rows inside a table-structure? Perhaps the line are the borders of the table?
Regards
Rainer

After re-installing photoshop elements following a HD crash, i get the following message after clicking on PE icon, "could not initialize photoshop elements because the scratch disks are full".How can this problem be resolved?

after re-installing photoshop elements following a HD crash, i get the following message after clicking on PE icon, "could not initialize photoshop elements because the scratch disks are full".How can this problem be resolved?

dgrparker a écrit:
photoshop element 2.0 - on windows 7. the program ran fine on the old HD, but this error popped up when I re-installed it on the new HD
Elements 2.0 is an old version. The message may be due to the fact that your new HD is much bigger than your older one, and not due to the classical reasons:
http://www.easyelements.com/scratch-disk-is-full.html

How do I capture good stills from video on Photoshop Elements 8?

I'm using Photoshop Elements 8. When I try to capture still photos from video clips, the results are not very satisfactory. Usually the stills are very unclear, not sharp like I want them to be. I have to make many attempts to capture a still before I can get one that's halfway clear.   Does it have to be this way?   What can I do to get consistently clear stills from video? Thank you!

Fair enough, Barbara. Thanks!
Lewis B.
Date: Wed, 30 Oct 2013 18:08:37 -0700
From: [email protected]
To: [email protected]
Subject: How do I capture good stills from video on Photoshop Elements 8?
    Re: How do I capture good stills from video on Photoshop Elements 8?
    created by Barbara B. in Photoshop Elements - View the full discussion
Frame from Video is more or less a legacy feature in PSE 8. It was meant to capture a frame or two from a short homemade video at a low resolution. It doesn't do HD video at all, and isn't meant for a clip that's more than a minute or so in length. It's been dropped from the latest version because nobody has those kinds of movies anymore.
So the bottom line is you're better off doing this with some other program than with PSE.
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5802253#5802253
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5802253#5802253
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5802253#5802253. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Photoshop Elements at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Is it safe to uninstall Adobe Photoshop Elements 10 after installing Adobe Photoshop Elements 12?

Is it safe to uninstall Adobe Photoshop Elements 10 after installing Adobe Photoshop Elements 12? I just upgraded from 10 to 12 and wanted to know if it is safe or if there would be any issues with uninstalling and removing Adobe Photoshop Elements 10.

Yes you can, if you are happy with the way PSE12 is running.
However both apps will happily co-exist, and there is no duplication as both use the same images on your hard drive.
PSE10 also has some features now removed from PSE12 as Adobe transitions towards 64 bit applications. See my PSE12 first look link:
http://forums.adobe.com/message/5709296?tstart=0

Where can I get photos on line to use as backgrounds for Photoshop Elements 9 ?

I have some pictures that iI took @ Walt Disney World that I would like to have new backgrounds. I have downloaded some from on line but when I try to fit them for the background they become blurred. Is there a site that I can download photos ? Is there a requirement about what size & how many pixels are needed? I'm using Photoshop Elements 9 .

If you Google for free photos for download, you will get many hits.
The problem is that they are usually low resolution, resulting in a suboptimal presentation with your high resolution foreground.
Another consideration is the copyright issue.
I usually make my own background in this type of situation. However, in full editor, open the content palette. In the drop-down select "by type" and in the drop-down to the right select "backgrounds".
If you are so inclined, post one of your pictures here for targeted suggestions.

How do i update my Mac App store bought Photoshop Elements?

How do i update my Mac App store bought Photoshop Elements 9? Adobe says Apple handles updates, no updates were ever issued via App Store. Manual downloads on adobe.com results in Patch not compatible on both a security/bug fix update to PE9 and Camera Raw 6.5 update that adds more supported cameras.
All together, it means i have 80$ of useless software that doesn't support new camera models. Not happy.

For some reason, Adobe pulled Photoshop Elements 9 from the Mac App Store. It may be related to the fact they released version 11 just 6 days ago? (Note that I'm checking right now and in the US app store - other county app stores may differ.)
In any case, because it is no longer existing, you won't be able to get any future updates. If I were you, I'd contact Adobe and specifically ask why they removed the app from the App Store, preventing their users from downloading any updates in the future.

How can I measure selected area of pixels using photoshop elements 12?

how can I measure selected area of pixels using photoshop elements 12?

Show the 'information' panel F8).
In the middle horizontal section, select 'pixels' on the left drop-down menu.
Use the rectangular marquee tool to select your area: the dimensions in pixels of the rectangle is shown under 'dimensions' on the right.
I think there are other ways to measure a line segment, but you could use the above measure by adjusting the rectangular marquee tools to both extremities of the segment,
- use the move tool to rotate the rectangle so that the diagonal measuring the segment is horizontal,
- move the rectangle to the left, and check validate, which creates another rectangle including the first one
- read the pixel dimension (L:) in the info panel like above.

My computer crashed, how do i download the digital format of adobe photoshop elements (I have the cd

my computer crashed, how do i download the digital format of adobe photoshop elements (I have the cd version, redemption code and serial #) to my new computer which does not have a cd drive

if you follow all 7 steps you can dl a trial here: http://prodesigntools.com/photoshop-elements-11-direct-download-links-pse-premiere-pre.htm l
and activate with your serial.
if you have a problem dl'g, you didn't follow all 7 steps. the most common error involves failing to meticulously follow steps 1,2 and/or 3 (which adds a cookie to your system enabling you to download the correct version from adobe.com).

How do I change platform for downloading and installing Photoshop Elements from Windows to Mac?

How do I change platform for downloading and installing Photoshop Elements from Windows to Mac?

As long as your license supports both platforms you should only have to download the Mac version and install/activate using your serial number. If you need help finding a link to download the file, please indicate the PSE version you need.

How to remove line space before/after paragraph in Photoshop Elements?

Similar Messages

Maybe you are looking for