How to remove Logic 8

Does anyone on this forum have a list of all of the assets that need to be removed for complete uninstall of Logic 8? I have to run Pro Tools 7 and I know that Logic embeds some files that conflict with Pro Tools. Any assistance would be greatly appreciated.

It does?
Edit: googled this
According to an official Apple statement:
"Pro Tools version 7 contains significant changes to the Digidesign Audio Engine that make it incompatible with current versions of Logic Pro 7 using TDM. If you plan to use Logic Pro 7 with your TDM system, it is strongly recommended that you continue to use Pro Tools version 6.9.x.
To use Pro Tools 7 on the same system as Logic Pro, it would be necessary to create a separate startup partition, maintaining Pro Tools 6.9.x on one partition for use with Logic Pro, and installing Pro Tools 7 on the other.
This document will be updated as more information becomes available."
So unless there's another issue, ProTools messes up Logic, not the other way round.
Message was edited by: spheric

Similar Messages

How to remove logical standby database configuration cleanly

Hello,
We are on RHL with 11.2.0.3 DB version. Due to various unknown reasons we would like to recreate logical standby database and for that purpose I would like to cleanly remove/uninstall/drop LOGICAL STANDBY DATABASE from the DATA GUARD configuration we have.
The DG setup already has 1 PHYSICAL STANDBY DATABASE which is working fine. PRIM,PHYSICAL, and LOGICAL all are on different HOSTS. Could you please guide or suggest us exact MOS Doc id regarding this? I have found one MOS Doc id which is close enough but its steps include removing dg configuration completely which I don't want. Only Logical Standby database needs to be remove cleanly so that it can be installed again properly.
We are using GRID CONTROL and DATA GUARD BROKER.
Bundle of thanks in advance.
Best Regards

Hello;
I would review this Oracle note:
How to remove a Data Guard Configuration from Primary Database (Doc ID 733794.1)
Best Regards
mseberg

Removing Logic 7

Dears,
please : anyone know the list of file - folder to remove ??
Thanks in advance....
A

Anton,
This Apple article describes how to remove Logic Pro 7.
http://docs.info.apple.com/article.html?artnum=300659

How to remove spaces at selection screen coming from logical database

Hi Experties,
When we hide some selection from the logical database. The spaces still occupied and this make our selection screen looks awkward.
How to remove the spaces left by hidden selection ?
Regards
Nislina

Hi,
I came across your un-answered question while searching for a solution on the similer problem. Though I couldn't fine a solution on SDN, but figured out one myself. Thought its a good idea to share it.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
    IF screen-group4 = '003'.
      screen-active = 0.
      MODIFY SCREEN.
    ENDIF.
ENDLOOP.
Here screen-group4 contains the sequence number of the select-options field starting from 000 onwards.
You may like to assign points and close the question.
Kind Regards,
Khalid Mustafa

How to remove database profile in report

Hello,
We have a report right now and upon accessing it, a window asking for a Database Profile comes out. This causes the program to have additional selection parameters for Project Definiton, WBS element etc.
Before we just ran the report for Period, Year, Cost Center Group. Ever since the Database Profile appeared we now have to put * in the WBS element so that the report will run.
Anyone know how to remove the Database Profile selection? One of our users reported that this wasn't in the selection parameters and our developer said there were no changes to the report.
Are there possible reasons why the Database Profile suddenly appeared?
FYI, the report was created using Report Groups (GR51/2/3)
Thanks.

Hi,
What selection criteria you need?
Database profile is needed to access objects from Logical PS DB. You have to put at least one selection object viz. Project Definition or WBS, or Network or Activity.
Create one of your own profile as per requirements and default it in user param.
Regards,
Harsh.
Edited by: Harsh Saxena on Jul 8, 2011 1:13 PM

Removing Logical Networks and Subnets from Hyper-V Host Network Adapters that are greyed out

Hello All
I am new to SCVMM 2012 R2 and I have create a Hyper-V Cluster and now creating Logical Networks and Port Profiles and Logical Switches. I have figured out how to create all of them properly now, but I have made some mistakes in the past. I have a Logical
Switch created and assigned to network adapters on the hosts. Now I am trying to add the other switches to other adapters, but I have associations on network adapters to Logical Switches and Subnets that are not correct and need to be removed so I can add
the correct ones, but in the console the network adapters that I need to work with the information is grayed out and I can't change the information.
I am not an expert at Powershell. Below you can see a Logical Network and Sunets associated
to a Network adapter. Can someone help figure out how to remove the information so I can assign the correct Logical Network?
I woul so much appreciate this. I know there is a way to do this in
PowerShell but I don't know Powershell that much. I
am savoing all the
powershell scripts ever time I configure something in SCVMM but I have had no luck trying to
revearse what I did.
Help Please
Christopher
Christopher Scannell

This shows that an Uplink profile associated with this host, links to these logical networks. In order to remove this successfully, you must remove the logical switch and uplink deployed to the hosts.
For a complete overview and guidance on the required configuration, have a look at the whitepaper we created.
http://gallery.technet.microsoft.com/Hybrid-Cloud-with-NVGRE-aa6e1e9a
-kn
Kristian (Virtualization and some coffee: http://kristiannese.blogspot.com )

Some help please: how to remove incompatible audio units?

Hello forum readers,
If someone knows, a little help would be appreciated:
When staring Logic Pro X, each time Audio Units are automatically being scanned. All the time I get a window with the message "Incompatible Audio Units found":
"While verifying Audio Unit compatibility, Logic Pro X encountered 1 Audio Unit plug-in(s) which did not pass the Apple AU validation. These plug-ins have been excluded from further usage in Logic Pro X to prevent possible problems or crashes. You can start the AU Manager now to review the validation results or continue the startup process."
When opening the Audio Units manager, I see that "AUSpeechSynthesis (Automap)applttsp" (Manufacturer: Apple, type: generator) couldn't be opened. I don't know how to remove or bypass this plug-in, as the option "disable failed audio units" doesn't seem to work. Now each time I start Logic Pro X, the same message keeps appearing. I also can't find that file on my Mac, a searched for it and also the Finder can't find it.
Does anyone know how to solve this? Thanks a lot in advance!
Kind regards,
Thijs

I have the same problem but I can´t figure out how to unwrap AUSpeechSynthesis. I can´t even find it in the filesystem with spotlight..... ;o(
And yes I have turned on the 64bit plugin friendly option in Automap's Preferences.
Thanks for your help!

Does anyone know how to remove images from google

i had instagram and i didnt upload images of myself but i only used my own image in the display picture and some how it has gone on to the google image search yesterday i deleted my account but when i checked to see if my images do appear in the google images i had some really bad regrets !! i reallywant to know how i can remove pictures off the google image search even doe this does not kind of relate thank you .

Does anyone know how to remove vocals from an import from I tunes...a polyphonic stereo mix ?
If you are talking about some "Karaoke" method using Logic I'll try to offer one. Before that I must say that most of the Karaoke methods are based on reversing the Phase of one of the stereo channel and bussing or merging the stereo into Mono. The result is: killing all Pan Centered in the mix - like Main Vocal, Bass, Kick, SN ect.
The artifacts of the Stereo FX of the main vocal will stay in the Karaoke, cause the FX is stereo etc.
Here is the Logic Setup I can offer to try some Karaoke trick using Logic.
1. Import a Stereo mix into a Logic Stereo track.
2. Create another stereo track and duplicate (copy) the Original Mix region to the duplicated track.
3. Hard Pan L/R both stereo tracks.
4. Insert an EQ and Gainer plugins into the duplicated track (R).
5. Set the Output select of the both tracks to a Bus and assign the new Aux Track Switch mode to "Mono".
6. Open the Gainer plugin and thick the "Phase Invert" Right button.
7. To keep the "lowend" instruments like the bass and kick, open the EQ plugin and enable the Low Cut filter and try some Hz settings 80-115, or different Q which will sounds better for your Karaoke.
P.S Click the image below to show its real resolution!
Regards,
A.G
======================================
www.audiogrocery.com
Author of: Logic GUI Deluxe(Free), Vox De Bulgaria s.a.g.e vocal pack for RMX, Logic Snapshot Console, RMX Power CTRL - Logic Environment Midi editor for Stylus etc.
======================================

How to remove Variables Personalization in the BEx Analyzer?

Hi All, Help us. Say please:
1. How to remove personal Variables Personalization for query/user in the BEx Analyzer with standart tools?
2. How to disable personalization button on varible screen?
Our users very often click this "bad" button and after that can't to find required criteria on selection criteria screen. We've studied BW Guides and Forum materials (may be not very thoroughly), but search usefull information only for Web Reporting. We've search corresponding table /BI0/APERS_VAR00 but fear to edit it directly.
Best regards, Igor

Hi All,
I think that best way to remove personalization of any var or infoobject could be done through the next logic.
we have ODS 0PERS_VAR.
we need to remove line from this ODS with specific parameters like USERNAME and VAR_NAME or IOBJ_NAME.
Step by step instruction:
1. Create update rule from ODS 0PERS_VAR to the same ODS.
2. Write 'Start routing' to update ODS with the next ABAP-code
LOOP AT DATA_PACKAGE.
 DELETE FROM /bi0/apers_var00
 WHERE tctusernm = DATA_PACKAGE-tctusernm AND
 ( tctvarnm = DATA_PACKAGE-tctvarnm OR
 tctiobjnm = DATA_PACKAGE-tctiobjnm ).
 DELETE DATA_PACKAGE.
ENDLOOP.
3. Activate update rule.
4. Update ODS Data in Data Target with 'full update' !
5. At the selection screen of info-package specify fields
 < 'TCTUSERNM' - username > AND
 < 'TCTVARNM' - var name > OR < 'TCTIOBJNM' - infoobject name >
PS:\ As result personalisation will be reseted selectively.
if it help you, it is a chance to donate some points to me
best regards

Installing 9 over 8: how to remove 8

I installed 9 over 8 and now I have both versions on my Mac. I called Apple to ask how to remove 8, since it's taking up room.
They said, assuming that you didn't change ANY default folders when you installed 8 and 9, then simply throw away version 8 icons for Logic Pro, Logic Node and MainStage from the Applications folder. Don't throw any other things away from any other folders, as Logic 9 has overwritten the original files in those folders.
Easy.

Yes, as has been said in many threads here already, if you don't want to run the old versions, just delete the old application bundles.
However, it makes sense to keep them (for a while at least), in case you get an oddities showing up and need to revert to the previous version. It's not like they take up a huge amount of disk space...

How to remove an arc correctly?

Can someone explain how to remove an ARC relation correctly?
Deleted the arc in the logical model but when I do an "engineer to relational model" the ARC is not removed there.

I'm afraid there is a problem that Engineer to Relational Model does not detect that an arc has been removed.
Until this is fixed, you will need to remove the arc in the Relational Model as well.
David

How to remove element from ByteArrayOutputStream ?

hello frds,
some body please help me how to remove first two elements of ByteArrayOutputStream before converting it to byte[]
if not possible,please help me out in deleting two elements of byte[] without using arraycopy method
thanks

instead of writing and then removing these 2
elements, isn't it just more logical to not write
them in?and if you can't do that (e.g. because the code writing into the OutputStream is not under your control), then you might consider writing a decorator e.g. called "DroppingOutputStream" extending java.io.FilterOutputStream which forwards all data to the underlying stream except for the first two bytes.

How to remove leading zeros from variable

hi,
 how to remove leading zeros from variable like it_vbap-matnr.
value in it_vbap-matnr is 000000000000000358
i want to remove leading zeros so that it become 358
regards
deepak

You can use Function Module 'CONVERSION_EXIT_MATN1_OUTPUT'
This Function Module will eliminate leading Zeros.
For each MATNR Value read form DB Table,u can eliminate Leading zeros and then modify ur Internal table.
I think u will not get leading Zeros into utr Internal table when u read from VBAP.
Bcoz MATNR in VBAP itself have Conversion routine.
If u r getting leading zeros,U can use following Logic.
tables:
vbap.
data:
 t_vbap like standard table of vbap.
select matnr
from vbap
into corresponding fields of table t_vbap.
loop at t_vbap into vbap.
CALL FUNCTION 'CONVERSION_EXIT_MATN1_OUTPUT'
 EXPORTING
 INPUT = vbap-matnr
 IMPORTING
 OUTPUT = vbap-matnr
modify t_vbap from vbap transporting matnr.
endloop.
Hope this will work.....

How to delete logical component

How to delete logical component in solution manger 4.0
Am deleting one system eatery in landscape components that time giving one warning?
Is there any option for deleting logical components?
Please give any solution for deleting system& logical components
Warning is
(Delete a system despite use
   You want to delete the system PRD, but it is still being used.
   You cannot delete the system as long as it is still used in logical
   Components. The where-used list tells you the logical components which
   Use the system. To delete the system, remove it from all logical
   Components first.
   You can only delete the system if it is used in system groups. The
   Where-used list tells you which system groups use the system.
   Warning
   If you delete the system despite use in system groups, you can no longer
   Access it in applications (e.g. in the Project Administration, if it is
   Used in a system group of type Project Landscape).

Dear Kiran,
Firstly find out where the system PRD has been added as an Logical System in an Logical Component. Remove the assignment and you should be able to delete the System.
Similarly for deleting an Logical component find out which solutions are referring to the logical component and deassign the Logical Component from the Solutions. You can then safely delete the Logical Components.
You can use the Where Used List button which looks like 3 arrow starting from an single point to different directions to find out the assignments.
Hope that this helps .
Regards
Amit

Can anyone tell me how to install logic 8 on lion using pacifist step by step in simple terms please

can anyone tell me how to install logic 8 on lion using pacifist step PLEASE

Both psd and tiff are the two formats to use for your master file. Saving as a jpg will flatten the layers and remove any trace of transparency. Tiff has an option in the save as dialog box to compress the file.
If you find it necessary you could zip older files for archiving.
Once the raw file has been opened in photoshop, it is no longer considered a raw file, as photoshop has no way to save to that file. Which is why you need to save as a psd or tiff.
That said, camera raw dialog box and Lightroom will save its edits to a sidecar file, which is why they are considered to be non-destructive. Since you can delete the side care file and start again. It is the combination. Of the raw file and the side car file that ends up in photoshop. Which is one reason why it is recommended to do as much as you can in camera raw or Lightroom first. But the latest version of photoshop allows your photoshop filets be loaded into camera raw as a filter. So that recommendation is not as important as it once was.

How to remove Logic 8

Similar Messages

Maybe you are looking for